Plasma weapon glow in less than 10 mins | Warhammer Miniature Painting Wargaming

Рет қаралды 20,668

3 жыл бұрын

Ever wanted to get that hot glowing plasma look on your weapons but didnt think you could do it? Don't worry I have you covered with a quick and easy method to get a red hot glow no matter what colour you use.
Featured Links:
Paints and Giggles on instagram - / paints_and_giggles
Deep Urban
by Eugenio Mininni

Пікірлер: 26

@KuPaoChicken 2 ай бұрын

White is the hottest part between the ribs! You nailed it. All the other vids are inverted and I'm so thankful to find your video here. Thank you

@ForgeofSolus 2 ай бұрын

You are very welcome :) thanks for the support!

@mellowminiatures2907 3 жыл бұрын

Yet another tutorial I will likely follow! Great work!

@ForgeofSolus 3 жыл бұрын

Thanks dude glad you found it useful!

@WinterWizard7 3 жыл бұрын

Great stuff indeed! Lovely work. 🧙🏻‍♂️

@ForgeofSolus 3 жыл бұрын

Thank you so much, very kind of you to say :)

@Hellinacar 2 жыл бұрын

Really good tutorial, glow is something I am trying to get right, so will give a go at the weekend. What psi are you using?

@ForgeofSolus 2 жыл бұрын

Thanks hope it helped. Depends on the paint and consistency and needle size tbh I adjust it quite a lot to get the right flow. Can be anywhere between 5 and anywhere up to 40. I usually work around 15 to 22. No hard abs fast rule I give you there I’m afraid. Best of luck:)

@MrAshutts 2 жыл бұрын

How do you do the quick puffs of air with the airbrush? I was always taught to press down for air, pull back for paint, go back forward so only air sprays, and then let go of the trigger. It looks like you are pressing for air and paint at the same time and releasing the trigger at the same time. Shouldn't this lead to clogs with paint dripping into the nozzle in between spurts of air?

@ForgeofSolus 2 жыл бұрын

Hey there. Yes best practice is as you say down for air abs back for flow (assuming the airbrush is dual action) I tend to use much thinner consistency paint and do many thing layers. Also I use a .35 needle for most things which helps with the clogging. I find with good care of the air brush and constant cleaning of the tip with a moist sponge I don’t have any issues with clogging. Again I cannot stress how important the right consistency and right air pressure is in this thoughts I work about 25psi but sometimes as low as 5 and up to 40 at times. The best advice I can give on air brush use is to get to know your set up do exercises like making circles and constant line thicknesses to really understand how yours likes to work. There is no magic rule unfortunately. Hope that helps shed some light on it and thank you for watching :)

@johnshepherd5669 2 жыл бұрын

Have you gone as far as adding some wisps of cotton to make it look like smoke or heat is coming up off of the weapon?

@ForgeofSolus 2 жыл бұрын

Hi thanks for the comment. So yeah I’m dioramas I have done similar but for gaming pieces I will play with I prefer to have them as robust as possible. Great idea regardless! Thanks:)

@awesomes3686 3 жыл бұрын

Those looked awesome. Is there an easy way to do it without an airbrush?

@ForgeofSolus 3 жыл бұрын

Thanks. Yeah so you could replace the air brush steps with light dry brushing around where you want the glow to be and achieve much the same effect.

@yostaustin 2 жыл бұрын

Which brush are you using in this video? Great osl!!!

@ForgeofSolus 2 жыл бұрын

Thanks for the comment and thank you for your kind worlds. The brush is Windsor and Newton Series 7 size 3. Hope that helps

@GDSMiniatures 3 жыл бұрын

Rekon you can use a thinned contrast paint for the black lining?

@ForgeofSolus 3 жыл бұрын

Yeah I don’t see why not or Indian ink maybe.

@azrael1045 2 жыл бұрын

like the channel name

@ForgeofSolus 2 жыл бұрын

Cheers Transformers will always be my passion:)

@GhoblinCrafts 3 жыл бұрын

Plastastic!

@ForgeofSolus 3 жыл бұрын

Puntastic! I will take that as a glowing review from you good sir. ;)

@stevejackson3396 2 жыл бұрын

The over-bright lighting washed out the details of the highlighting, unfortunately.

@ForgeofSolus 2 жыл бұрын

Noted since shooting this video I’ve changed the lights abs camera I use and this is on the list of videos to redo this year. Thanks for the feedback on this:)

@paulevilnoodlenight Жыл бұрын

the shot of the finshed product went to fast need to slow pan that shit lest 2 mins worth of paning not 3 sec

@ForgeofSolus Жыл бұрын

Noted I really do need to redo this video now I’m a little further on with my understanding:) I’ll get it added to the list thanks for the feed back:)