Plug and Play Pioneer CDJs with Traktor

  Рет қаралды 272,274

DJ TechTools

DJ TechTools

9 жыл бұрын

*Support more videos by checking out our store: bit.ly/DJTTStore
**Subscribe to the DJTT newsletter for free weekly soundpacks: bit.ly/FreeSoundpacks
***Ryan Dejaegher shows how to setup Pioneer CDJs for easy plug and play operation with Traktor: wp.me/pa1fv-bOe

Пікірлер: 201
@70L3N71N0
@70L3N71N0 7 жыл бұрын
This video literally saved my life at a gig yesterday with 2 CDJ 900s. What did it for me was to leave the Aggregator opened, running in the background, without pressing "OK". Otherwise it all goes to one single external channel. Thanks a lot, keep up the good work.
@kwisclubta7175
@kwisclubta7175 Жыл бұрын
So the club owner was going to literally kill you if you didn't get this figured out?? LITERALLY????
@70L3N71N0
@70L3N71N0 11 ай бұрын
@@kwisclubta7175 was the use of the adverb not to your liking kwis? Sowwy Kwiiiis! No, I don't live in America. Where I'm from, we don't kill each other for no reason. Club owner was chill but I like to make sure the equipment works and I can DJ properly so 6 years ago I thanked this fella for his insight on using Aggregator. Does that settle it for you, pal?
@NickedBeats
@NickedBeats 8 ай бұрын
Mate so happy I seen this comments literally haveing the issue with 3 CDJ’s yesterday but kept closing the aggregator
@crabreaper3708
@crabreaper3708 9 жыл бұрын
Probably one of the best and goodness looking set ups I've seen. Not only does it look good and sleek, the gear is top notch.
@DJ-eh2dm
@DJ-eh2dm 6 жыл бұрын
Not sure about the regular NXS, but if you are using a NXS2 mixer you will have to plug your mixer (both A and B midi) as well into a USB hub along with the CDJs for this to work. You will then have to select "A" and "B" above your trim knobs so the channel knows where to locate the signal. Hope this helps!
@bobalm001
@bobalm001 9 жыл бұрын
Thanks for this, putting my Audio 6 away and using this mode from now on
@bogiev1
@bogiev1 Жыл бұрын
Amazing tips once again! Keep up the good work. Cheers.
@frantzlauredant3425
@frantzlauredant3425 8 жыл бұрын
Thank you for the tips! Would this same process also work with the CDJ NXS2 and an S8 controller? Also, would the S8 functions such as STEM decks still be usable? If possible, what is the process? Thanks in advance
@djbbb4923
@djbbb4923 7 жыл бұрын
can you do this for serato too by using djm 900 as a sound card ?
@siroberts6030
@siroberts6030 3 жыл бұрын
Will HID mode affect the the hot cue buttons on a Z2 mixer. I have used time code (vinyl) for years but need a CDJ set up also.
@ivanamusicofficial
@ivanamusicofficial 6 жыл бұрын
hi do you know how to coneect the traktor to allen&heath xone mixer?
@djslavick
@djslavick 6 жыл бұрын
Hey there DJTT. So if I set it up like this with my Z2 mixer, I assume I loose all the control functions from Z2 right? I am looking at the possibility of using one CDJ-900 or 2000nxs as a deck controler, pretty much the same way I would do it with one turntable and a Timecode vinyl. So if I need to keep the Z2 as a controler for the Traktor cues/loops/fx it would be better to stick with timecode cds right?
@chucke2319
@chucke2319 5 жыл бұрын
Yo quick question will the nexus mixer work if you midi map it on Traktor and also will the fx work
@Tripsngiggles
@Tripsngiggles 2 жыл бұрын
Hi, great vid! I had an issue where the left deck phono cable had to be switched (r to l and vice Versa) is that due to output routing being incorrect? It’s like deck A was deck B although I selected the decks right etc
@ricardovanilli
@ricardovanilli 6 жыл бұрын
Thank you for the nice and clear video. I have a question. I'm a dj that uses both Traktor and CD's. For the moment I use a Denon MC6000 with os 2 channels 2 cd players and 2 channels for Traktor. Is it possible to switch with the CDJ2000 nexus between Traktor and CD's? So let's say one deck is playing channel A on Traktor and the second one is playing a CD and than switch again to Traktor? It's just that not my whole CD collection is already digitlised and sometimes I have to use a CD for a certain song. I have for a gig tomorrow 2 Nexus 2000 with a DJM900 nexus. Thanks for the response.
@DJKento
@DJKento 9 жыл бұрын
Awesome. I have a huge gig coming up and this will really cut down on time between DJs. I still need an update to that MASCHINE mapping... the echo freeze doesn't work. But I'll message you about that.
@user-pv9kg9ou1l
@user-pv9kg9ou1l 6 жыл бұрын
What version of traktor did this become available? Cheers
@shaunsymmonds
@shaunsymmonds 8 жыл бұрын
Hi, Is there a version for windows - for the aggregator?
@lucaslaboudes2919
@lucaslaboudes2919 5 жыл бұрын
i 've tried the exact steps but i had issues with the play function, everything worked fine except "play" in one cdj is similar to cue and in the other was looping. Any idea?!
@Peace.Officer
@Peace.Officer 5 жыл бұрын
So if you hold shift.. can you activate/deactivate a pre-set loop in traktor?
@djarielwaldman
@djarielwaldman 5 жыл бұрын
How do you have the hardware connected between them?
@Lordblanca
@Lordblanca 9 жыл бұрын
You said dj endo has w mapping. Does his mapping include a way to use all 8 hot cues
@djayan1213
@djayan1213 7 жыл бұрын
fablous instrutor
@clamhunter123
@clamhunter123 2 жыл бұрын
Thank you so much, so helpful
@RonArdronChiefRocka
@RonArdronChiefRocka 8 жыл бұрын
With the Z2 in the video, the CDJ's were connected to the back of the mixer via the USB hub, with the mixer's USB hub connected to the MBP. Any issues with this configuration ?
@sc_hdz
@sc_hdz 3 жыл бұрын
Heyy! Im trying to connect my pioneer djm 450 and traktor z1 to traktor pro. Im looking forward to play with 4 decks (2 xdjs + traktor x1 mk2), so the idea is to use the djm 450 (which is a 2 channel mixer + Aux in) for the 2 xdjs, then connect the z1 on the Aux line so that the x1 can be controlled with it. Master out is gonna be on the djm450.. but Ive been trying and dont know how to connect 2 mixers any ideas?
@robinteothecoolest
@robinteothecoolest 9 жыл бұрын
Thanks that was on point solves eveything
@djaymanawad
@djaymanawad 9 жыл бұрын
Is There is anyway to connect F1 to control Remix Deck in HID without soundcard???
@C1ndf2ndi3
@C1ndf2ndi3 9 жыл бұрын
When will the new update that supports xdj's come out?
@lolitapink1985
@lolitapink1985 7 жыл бұрын
Is it necessary to plug in the mixer (dm 900 and other supported mixers) as well directly to the computer? and the 2 cdjs to a USB HUB?, do you need to download the drivers of the mixer?- or should i just hook up the cdjs as you explained, and the mixer isnt necessary to hook up as its already connected to the cdjs via rca or digital cables?
@NickLedesma
@NickLedesma 8 жыл бұрын
How do you record using this setup?
@gustavomozogutierrez7025
@gustavomozogutierrez7025 8 жыл бұрын
gracias amigo me ayudaste mucho!!!!!
@thelevels7322
@thelevels7322 7 жыл бұрын
CDJs 850 with Traktor is it works and what we need to connect like drivers or tsi file
@djghost954
@djghost954 7 жыл бұрын
I also noticed you are using a traktor mixer...can you plug the cdj into the traktor mixer and everything still function properly?
@planc7on
@planc7on 6 жыл бұрын
when DJ's are switching (from traktor to just playing with usb sticks), what's need to be done? can I just plug my USB drive in the deck that's not playing and select "usb"? and when I mix my track, just unplug the laptop? or is there any additional hassle involved?
@et9088
@et9088 9 жыл бұрын
Does anyone know if its possible to disable the touch sensitive platter (enabled in VINYL mode) in the mapping environment? Using the Pioneers in CDJ mode has major problems with the Play/Pause button which Native Instruments don't appear to trying to fix.
@djtomharwood
@djtomharwood 7 жыл бұрын
Does the firmware on the 2000 Nexus need to be 4.1 or higher?
@jenulicius
@jenulicius 6 жыл бұрын
I need these settings for cdj 800mk1 and 800mk2 for traktor software please
@jurajkrajcik4410
@jurajkrajcik4410 25 күн бұрын
Hi. Thank you for the video. I have question on to how to record a mix with traktor , when you use cdj's (900nsx) soundcards. I seem to have difficulty to record mix internally, because input settings dont allow mé to assign cdjs to channels a & b, but onmy to one channel and i did not find the way how to record mix externá when cdj's are used as audio devices. I know how to record with external mixer but would want to know if it is possible to record mix in traktor with cdj/xdj asio. Thank you for your help.
@rickwijlens7490
@rickwijlens7490 9 жыл бұрын
Thnx, worked!!
@robedwardsmusic
@robedwardsmusic 5 жыл бұрын
Thank you!!!
@goregorgegeorge
@goregorgegeorge 7 жыл бұрын
How is the wiring done?
@abhijeet1abhijeet
@abhijeet1abhijeet 6 жыл бұрын
Thanks man!
@robbiehenderson3633
@robbiehenderson3633 7 жыл бұрын
Does this work with serato too?
@meesterbruno7466
@meesterbruno7466 8 жыл бұрын
Hi, when you're using HID mode does the bpm also change on the screen? For example when you have like a transition that starts with 99bpm and than changes to 128 bpm . Because i'm always curious how other dj's use or can use transitions with traktor ? It would be awesome to get a reaction back!
@KupujtePytle
@KupujtePytle 8 жыл бұрын
yes, it does display the current bpm in real time on the cdj display. just like you would use it with cd or usb stick.
@1djbigwil
@1djbigwil Жыл бұрын
Hey! I have the Cdj -900 nexus with the Z2 mixer. How do I run this set in HID ? Please! Help
@ItzDaTwiGGajD
@ItzDaTwiGGajD 9 жыл бұрын
How did you get the z2 and both the cdjs plugged into the laptop when there's only two usb ports on the mac?
@BreakoutPromos
@BreakoutPromos 4 жыл бұрын
usb hub
@israel0823
@israel0823 9 жыл бұрын
Can you still use the "out" and "in" adjust the loop, you know when you hold "out" or "in" in a loop and use the platter to adjust it?
@djwasjhok6156
@djwasjhok6156 9 жыл бұрын
Yes, you can.
@jurajkrajcik4410
@jurajkrajcik4410 28 күн бұрын
how can you record the mix with cdj soundcards? Like there is not input possiblities in settings.
@TheNinjainPijama
@TheNinjainPijama 9 ай бұрын
Is it possible to use this traktor mixer and two cdj XDJ 1000 MK1 s without connecting anything to the traktor software on my laptop? Basically same as a DJM setup?
@MrGriffin313
@MrGriffin313 2 жыл бұрын
How do you record a mix tho?
@JB-qu8ri
@JB-qu8ri 8 жыл бұрын
Is it possible too with XDJ - 1000 Pioneer??
@VladiZepeda
@VladiZepeda 8 жыл бұрын
hi dude, i have cdj400 and i tryed to use them with traktor and it was fine but the problem is the track is playing in each player just sound in one channel of the mixer, i have seen tutorials to fix that issue and i realized all of them say i have to choose pioneer cdj asio in audio device, but when i connect my cdj400 just appears in that menu poneer cdj400 1 or 2 and asio xall driver, i have tryed to find pioneer cdj asio driver and i found sound of them but when i try to find it on audio devices on traktor i can not see it, do you have any ida whats wrong with? i though cdj400 werent able to work with traktor but i already can use them as a controler for it, the problem now is how to send the track on each player to different channels in the mixer, it supose to be with pioneer cdj asio driver but i can not find it.
@matthewcordiner2734
@matthewcordiner2734 7 жыл бұрын
Great setup and easy to follow instructions but I have the Z2 at home with 2 turntables. I am looking at purchasing CDJs and continuing to use Traktor. My question is what is the difference between picking up a pair of second hand CDJ1000s VS spending 2 1/2 grand on XDJ1000s when my Z2 does all the extras that the XDJs do - hot queues/loops etc. Obviously I would have 2 LCD screens but the info on them is also visible on Traktor on my laptop. Genuine question = all answers welcome
@mayalipat
@mayalipat 7 жыл бұрын
I was using vinyl and stuck with it for years as I didn't like CDJ's. When vinyl became harder and harder to get I went straight to Traktor and loved it. I like my Traktor S4 and love my library /set up etc but as I am going to start playing out again rather than parties I need to get CDJ2000 muscle memory built up so buying the CDJ2000 nexus 2 today. Reckon I will use Traktor with it but mostly excited to get move to hard drives, not having to worry about my laptop all night and feeling really comfortable with the Pioneer industry standard. Started moving trans to Rekord box this week and I REALLY like it. Going to take a long time to tag everything but Im already thinking its much better than Traktors tagging, which surprised me.
@oakgrovebrazil
@oakgrovebrazil 5 жыл бұрын
You dont need to fix the controller dive map ?For example Map MIDI TSI for the CDJ
@AyushGupta-lj3jp
@AyushGupta-lj3jp 6 жыл бұрын
Can I use Windows laptop for connecting pioneer cdj 2000?
@davidbarker1
@davidbarker1 7 жыл бұрын
I've followed this step by step but only getting sound from one speaker! has this happened to anyone else and if so can you tell me how to fix it? thanks
@KupujtePytle
@KupujtePytle 8 жыл бұрын
Tip: plug in the cdj on the left side of the mixer first, then plug second cdj on the right as second and continue until you plug all the cdjs. this way your computer will now, which cdj is which as they are set so first cdj connected is always on the left side.
@sergeykozlenko8037
@sergeykozlenko8037 4 жыл бұрын
How to speed up and speed down on decks with traktor?
@3MT0TH3K4Y
@3MT0TH3K4Y 9 жыл бұрын
Does this also work with CDJS850?`
@KupujtePytle
@KupujtePytle 8 жыл бұрын
i found out that setup with older units than CDJ2000 is bit problematic. their hid mode isnt plug and play ready and you have to manually map or import mapping for it to work. definitely not for the club environment friendly. i actually never succeded trying it this way.
@vinihoff
@vinihoff 9 жыл бұрын
Can you do all these steps while the other DJ is playing? Also, if the firmware is not updated and the other DJ has only 1 track left to play what would you do?
@avadhuta
@avadhuta 8 жыл бұрын
if other DJ is using same setup probably not, I am searching for solution too
@alexanderglimpel4348
@alexanderglimpel4348 2 жыл бұрын
I used it during a set.
@AnnaSofia_
@AnnaSofia_ 3 жыл бұрын
Which cables do I need to connect the CDjs to the Mixer, so that the mixer is actually grasping the Traktor as well?
@myshouzuhouse
@myshouzuhouse 2 жыл бұрын
No it goes throw the hardware mixer not software
@dicksonbegi1
@dicksonbegi1 9 жыл бұрын
how many usb cables do you need to connect both CDJs to your laptop? also i heard about connecting DJM 900 to Laptop via usb , is that similar with CDJ hid mode? please reply and thank you very much!
@djtechtools
@djtechtools 9 жыл бұрын
***** You'll need one cable for each CDJ that you're connecting (2 CDJs = 2 USBs, 4 CDJs = 4 USBs). The DJM 900 has a Traktor soundcard built in so if you have that connected to your laptop you don't need a Traktor soundcard like the Audio 6/10. You'll still need to have your CDJs connected via usb cables to the computer to use them in HID mode with Traktor - Ryan Dejaegher
@C1ndf2ndi3
@C1ndf2ndi3 9 жыл бұрын
Djtechtools, can you do this with traktor pro 2?
@djtechtools
@djtechtools 9 жыл бұрын
***** Hey Jacob, yes this can be done with Traktor Pro 2.
@brianfarrugia8771
@brianfarrugia8771 2 жыл бұрын
When connect cdj with traktor everything fine worked properly but when I use cdj usb or cd doesn't read it how can we fix it ?
@vanshajchauhan7435
@vanshajchauhan7435 4 жыл бұрын
Finally I found u
@clerioevaristo3794
@clerioevaristo3794 5 ай бұрын
i have the cdj 900NEXUS connected HID mode but one jog doesnt work on mode vinyl . having another issues too traktor pro 3 with recording set not work on mode external . anybody that can help me please?
@jamesharper2268
@jamesharper2268 4 жыл бұрын
where is the link for the aggregate file please
@ItsdjskpDJSKP
@ItsdjskpDJSKP 9 жыл бұрын
How do you do hid mode with 1-2000 and 1-2000nexus
@djtechtools
@djtechtools 9 жыл бұрын
Itsdj skp The process would be the same, Traktor will detect the CDJ and map it appropriately.
@giorgiobrat
@giorgiobrat 8 жыл бұрын
Very useful video, but I have a question! Can I use traktor x1 at the same time with cdjs?, Using the effects of traktor? If yes, how I connect them? Thank you.
@MOVmdnss9999
@MOVmdnss9999 8 жыл бұрын
+Giorgos Isaac yes you can, and the connection depends on the amount of usb slots you have. if your laptop only has 2 then you need to use an active usb hub :)
@giorgiobrat
@giorgiobrat 8 жыл бұрын
Markus Müssig Thanks!
@motionbobo
@motionbobo 8 жыл бұрын
Does this work with a windows laptop + Traktor 2 ?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
yes. although you do not use aggregator app. windows need soundcard driver for cdjs. download them on pioneer page :)
@7azzomz
@7azzomz 8 жыл бұрын
can i do the same if i wanna play with cdjs and pioneer mixer so i can plug my x1 traktor and laptop without external soundcard?!
@KupujtePytle
@KupujtePytle 8 жыл бұрын
yes. you just need enough usb slots. remember, every cdj unit needs to eat one of your usb slots. if using usb hub, make sure its quality material and its powered!
@captainmarvel69
@captainmarvel69 6 жыл бұрын
Does it work if you link the 2 CDJ, so you only use one USB port on your computer ? i guess not but still asking
@patrickfantasia5134
@patrickfantasia5134 7 жыл бұрын
I have cdj 2000 nexus mk2's. all firmware is up to date and I read it automatically goes into advance HID mode hence why there is no setting for it on the newer models. When I link and it goes into control mode it will NOT LET ME SELECT TRAKTOR. WHY? anybody have a solution for the new models?
@83zoja
@83zoja 7 жыл бұрын
you're CLIPPIN'
@chrispratt2030
@chrispratt2030 9 жыл бұрын
DJ TechTools will this work on cdj 900 nexus?
@djtechtools
@djtechtools 9 жыл бұрын
Chris Pratt with Traktor 2.8, it will!
@SupaSandeep
@SupaSandeep 9 жыл бұрын
Great vid! Why are Hot cues A/B/C mapped cues 2/3/4 instead of 1/2/3? Is there a way to access Hot Cue #1? That's been my biggest gripe with HID mode
@Uddjs
@Uddjs 9 жыл бұрын
DJ endo has a custom mapping to sort that
@mikeengelmoer4202
@mikeengelmoer4202 9 жыл бұрын
Probably because cue one is the start of a track ;)
@hattoom
@hattoom 9 жыл бұрын
Siiiiiiiiiiiiick!!!! 👏👏👏👏👏👏👏👏👏👏👏👏👍👍
@bunnyblanca369
@bunnyblanca369 2 ай бұрын
way cool
@OneBadAssDJ
@OneBadAssDJ 9 жыл бұрын
Why is it when I use Traktor in HID mode with my CDJ's, the #1 cue point button goes directly to cue point #2 inside Traktor. I been trying to figure this out but no one can give me a straight answer. I want the cue buttons on the CDJ's to control the hot cues i'm using. I don't want hot cue buttons 1, 2 & 3 on my CDJ's to control Traktor's 2, 3 & 4 cues.
@djghost954
@djghost954 7 жыл бұрын
where did you get those USB cables from?
@Tigrarol
@Tigrarol 7 жыл бұрын
at dj techtools?
@Warren_Alexander
@Warren_Alexander 9 жыл бұрын
Please do a video of HID mode for Pioneer CDJ 850's
@djtechtools
@djtechtools 9 жыл бұрын
Hey unfortunately the CDJ 850's don't have advanced HID support in Traktor. People have asked for a long time and it hasn't happened, so it likely won't be supported.
@Supaflyy
@Supaflyy 9 жыл бұрын
DJ TechTools can you do a setup video with CDJ 850's for recordbox, bought chroma cables and struggling to link them properly and what settings to use in recordbox Please Help haha!!
@mattrainville9010
@mattrainville9010 7 жыл бұрын
How they laugh of us !!! I remember at the release they were saying that they will be HID compatible with Traktor but they only give us timecode compatible for the CDJ-850. Serato did the HID for the cdj850 and rekordbox recently did it. Hope Native Instruments will follow the train and add HID support in the next release of Traktor Pro for the cdj850. Even if its really late I think no owner of cdj-850 will be against its release... Pioneer DJ Native Instruments
@adamvuong
@adamvuong 9 жыл бұрын
Is this already available for serato?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
serato say yes. i have never tested it though. also maybe you need full version of serato dj. anyone can relate?
@ivansinko
@ivansinko 9 жыл бұрын
Does it work on traktor LE
@KupujtePytle
@KupujtePytle 8 жыл бұрын
i seriously doubt it. anyone tried?
@Shari_Tejp
@Shari_Tejp 8 жыл бұрын
What about sound quality when using CDJs as the sound card? Is it the same as using cdj as stand alone or is it worse. Because there is lot of discussion on forums about bad quality when using cdjs as sound card for traktor. So I just want to know your opinion?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
good question. i found that highest sample rate you can choose is 48KHZ. im not sure with CDJ2000NEXUS2 tho, they might have upraded this option. Also yes, im lazy and play 320kbps mp3s so i dont find the 96khz option necessary.
@Shari_Tejp
@Shari_Tejp 8 жыл бұрын
+Ondrej Posolda 48khz is good. but I would really like to hear a track coming from traktor>cdj soundcard>mixer, and that same track coming from usb on other cdj. and A/B them in realtime so i can decide is this just a myth or true...
@KupujtePytle
@KupujtePytle 8 жыл бұрын
i can tell you right away, good sir. it feel honestly the same as when using traktor soundcard. traktor influences its output by its master volume, autogain and limiter. so i experience guys playing directly from cdj using cds, rekordbox or usb stick have generally higher volume and dynamics, so i HAVE to adjust to the same leven on the gains of the mixer. The sound quality when in Traktor HID mode is however translated by cdj itself, and we all know, the pioneer things are pretty much ok and can even deserve industry standard. So long story short: after gain adjustments when compared playing same tune on same bitrate from traktor hid mode cdj and cdj loaded with tune directly it feels strongly the same. honestly i can't find the difference. all this said, HID mode has one upside to traditional Traktor stuff. You can use the digital out on the cdj to send digital signal, whereas traktor soundcards can't (as oposed to higher serato soundcards, right?), which might have potential to someone :).
@TheSud0
@TheSud0 7 жыл бұрын
Hey Shari, the sound quality is worse atleast what I heard. When playing from USB straight from CDJ the sound is more crisp and clear. You don't have to boost the audios gain much as well, but that might be because of Traktors headroom.
@WuRealhero
@WuRealhero 9 жыл бұрын
heyy, how did u get ur traktor to open so fast
@djtechtools
@djtechtools 9 жыл бұрын
Wu Realhero I have a Solid State Drive, highly recommended to give your computer a speed boost.
@WuRealhero
@WuRealhero 9 жыл бұрын
DJ TechTools yea i have a great SSD but Traktor still take long to open
@zenluiz
@zenluiz 6 жыл бұрын
Is your collection big? When the collection is empty or very small, it opens really fast. Mine is big (1000+ tracks) and am using the same collection for years. It takes around 10 to 15 seconds to open.
@diederikdelange3135
@diederikdelange3135 8 жыл бұрын
if i'm using the 400cdj's does it mather what mixer i use?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
HID CDJ mode is independent on your mixer setup. it doesnt matter which mixer you use. using DJM900nexus as a soundcard is completely different topic tho. dont get the two mixed up mate :)
@rodrigodiaz3756
@rodrigodiaz3756 8 жыл бұрын
This works also for an analog mixer ?? I just did all that was explained but signal is not coming out from the mixer but from the laptop, I cant use the mixer but the controls on the software
@KupujtePytle
@KupujtePytle 7 жыл бұрын
hi rodrigo. A) your setup needs to be external type (change it in output options) B) also you need to select right soundcard in your traktor setup. please rewatch the video and tutorial very very carefully :)
@djstephhoney
@djstephhoney 7 жыл бұрын
Maybe this has been asked and answered already but, why is there no "hot cue 1"? Why does it start at 2?
@danlhomme00
@danlhomme00 7 жыл бұрын
cause usually hot cue 1 is set to the beginning of the track in traktor
@sezarpeiro9847
@sezarpeiro9847 9 жыл бұрын
So it means for any models of Pioneer CDjs lower than 900 this instruction will not work?! what about CDj850 or any other models lower than 900? Not every clubs equipped with the CDJ900. what else do i need to be able to do the same with other models of pioneer CDjs? or is it even possible? thanks
@slandrews93
@slandrews93 9 жыл бұрын
+Sezar Peiro im pretty sure you can link traktor with most cdjs by pioneer, i tried it on some CDJ400s and it worked fine, maybe you'll need to download a different driver on the laptop (i can't quite remember exactly but it did work)
@KupujtePytle
@KupujtePytle 8 жыл бұрын
yes, older versions than CDJ2000 are not plug and play ready as shown in the video. its setup is more hustle. i do not recommend it trying in club environment without heavy testing in studio.
@AmyTigris
@AmyTigris 9 жыл бұрын
This only applies for OSX since it can only use one soundcard where as in Windows it can use the driver ASIO and use both soudcards
@djluminol
@djluminol 3 жыл бұрын
I have my current computer setup that way. It's really great. If I'm recording a mix I can sit down and watch KZfaq at the same time while I wait the 8 minutes for the song to play out before I need to do my next mix. I can do a total of three independent sound sources at any time and not have them interfere with each other. The mix via on board controller sound using an asio driver, computer audio via windows driver and the third source via the ZXR driver. I don't think it's actually supposed to work but creative makes janky drivers and the ZXR will allow 2 input sources at any time independent of each other. There's a setting that says allow this device exclusive access. If you uncheck that you can run 2 sources. I've never once had a problem with the sound card lagging or not keeping up and causing glitches in the mix recording. It really is a nice feature to have.
@CrazedTeenz
@CrazedTeenz 5 жыл бұрын
My CDJ 900 nexus freezes in HID mode traktor 2.8.1
@felixmilleniantosetiawan5530
@felixmilleniantosetiawan5530 7 жыл бұрын
How about cdj 1000 ?
@yannwnnd
@yannwnnd 9 жыл бұрын
how many usb cables do i need for this? 2?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
yes :)
@chrispratt2030
@chrispratt2030 9 жыл бұрын
will this work on the cdj900 nexus?
@seanrajapaksha
@seanrajapaksha 9 жыл бұрын
Chris Pratt yes it does even with normal cdj 900
@chrispratt2030
@chrispratt2030 9 жыл бұрын
Shiran- Ta I have the cdj 900 nexus though?
@seanrajapaksha
@seanrajapaksha 9 жыл бұрын
it works :)
@chrispratt2030
@chrispratt2030 9 жыл бұрын
Shiran- Ta It doesn't work, the 900 nexus doesn't have HID mode. I've just retried again there :(
@djtechtools
@djtechtools 9 жыл бұрын
Chris Pratt it does work - update your firmware and update Traktor to 2.8! Read more here (scroll down) www.djtechtools.com/2015/04/27/traktor-pro-2-8-rane-mp2015-officially-scratch-certified/
@prikshitsood
@prikshitsood 8 жыл бұрын
I could't find the aggregator tool :( Can anyone provide the exact download link?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
Here ya go good sir: cdn.pioneerdj.com/-/media/pioneerdj/downloads/software/cdj-aggregator/cdjxdj_aggregator_103.zip
@dobsonironmonger2414
@dobsonironmonger2414 8 жыл бұрын
wish I could do this, but i dont got 6k to blow on 2000nxs's and a djm 900 :(
@KupujtePytle
@KupujtePytle 8 жыл бұрын
have you considered renting a local dj studio place with such equipment. i found out i pay few hundred bucks a year to have access to latest stuff and get enough play hours. but it depends. if you need to build your home studio, good luck :)
@seamusgirvan5843
@seamusgirvan5843 9 жыл бұрын
Can you see the full wave form on the cdj as opposed to looking at the laptop waveform? Not the small one along the bottom the actual main one. The guy didnt actually say if you do?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
afaik, no, the full waveform detail is not available in HID mode. most unfortunate. agreed.
@nunesgil-3668
@nunesgil-3668 2 жыл бұрын
Why not midi manager??
@djcandymanuk
@djcandymanuk 8 жыл бұрын
Does this work with a windows computer?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
yes. download the windows drivers for cdjs :)
@C1ndf2ndi3
@C1ndf2ndi3 9 жыл бұрын
+DJ Tech Tools, can you do this with XDJ's?
@djtechtools
@djtechtools 9 жыл бұрын
***** Hey Jacob, the XDJs aren't supported in HID mode with Traktor yet, but they are adding support in the next update. The setup steps will likely be the same.
@andyxandyx
@andyxandyx 8 жыл бұрын
+DJ TechTools i know this video was before El Capitan,i ran into a problem after updating to el caitan whereby traktor 2.10 only shows 1 left and 2 right ,no option for 3 and 4 so decks audio comes out from same output ...i ended up using my usb
@KupujtePytle
@KupujtePytle 8 жыл бұрын
hooray, they are supported now! :) tested it quite few timeas already.
@dj-peterofficial2753
@dj-peterofficial2753 8 жыл бұрын
Sorry for asking BUT, why not just plug a Rekordboxed USB or SD card and get all the functionality if the club have this equipment. Even more so if it's the Nxs or Nxs2. Show up with your prepared tracks and your headphones and your ready to go. I can understand this for a home setup, but Rekordbox is free to download, so why bother and go through all the fuzz to bring more equipment when it's a complete waste of time and effort. I have a pair of 2000Nxs and this sounds like a lot of extra work to almost get full functionality from the 2000's. If you have a good computer it's a matter of a day or two to get all your music setup in Rekordbox as well. If you already play in clubs that have high end Pioneer gear, I'd recommend to try and use Rekordbox and let these players come to their full potential. You can still bring your computer and link it and stream your music direct from Rekordbox over ethernet. These players don't care if the music is coming from USB, SD or LAN. They load the same way and the player is in control when a track is loaded. Couldn't be more simple.
@KupujtePytle
@KupujtePytle 8 жыл бұрын
I hear ya! but please hear me. I have been djing on Traktor for so long, im super used to its library. its actually lesser hustle bringing your laptop to a club than transforming your latest Traktor library or selected playlists to rekordbox and export them before the gig. Also using Traktor can give you few more options that are strictly better than rekordbox setup, for example +-32 beat beatjump (rekordbox offers 4beat jump tops, which is not enough). The setup in the video may sound complicated, but in reality it takes only few seconds to prep up. When compared with DVS setup on cdjs using traktor soundcard, this is strictly better.
@TheSud0
@TheSud0 7 жыл бұрын
I think it's easier to manage my playlists and music collection via Traktor. It allows me to hop through libraries and use search. Also looping and a big waveform is definitely something that helps you especially if you're playing tracks that you don't know that well. This is mostly when it's a birthday or a private event where people will request songs. You can also download tracks live if necessary. Different thing is when you know no one is going to request and they come to listen to you playing. Then a rekordboxed USB is a better choice, you know all your tracks and it's all about the atmosphere, not Jason Derulo singing about travelling the world x) just my 2 cents
@dj-peterofficial2753
@dj-peterofficial2753 7 жыл бұрын
ZENSE I play as an open format DJ. I mainly play in clubs, but very different nights. I also play on Private and Corporate events so I have + 12000 tracks on my SSD's to cover most of my needs. Everything is well organized in different crates/playlists so I can find the tracks I need fast, but there's a very good search function I can use as well. That's not a problem. About the waveform. The waveform is actually bigger on the screens on the Nxs/Nxs2/XDJ-series than they are on a 15'' laptop running Traktor/Serato, and you can easily zoom in and out as well. Beat grids ar adjustable on the fly. The info about cues/hot cues/loops are also very easy to read. On the Nxs/Nxs2 there's also instant doubles, bar countdown and other functions more common in DJ software. If you use an i-Phone, you can install Rekordbox on it. If you feel you must download a track, do it. Import it to Rekordbox and then you can play it. If you use your laptop, same proceure. The new search on the Nxs2 and XDJ-1000Mk2, with qwerty layout and the way you can categorize your music for different search preferences is the best in the business. Dj software doesn't even come close. If you live nearby you're welcome to visit for a try out. An hour with the Nxs2 setup and Rekordbox and you'll start saving for your own setup :) . I hope you have someone who can show you how it works because I read so many uninformed opinions here that I'm surprised that some people even bother to write at all. I have used Traktor on my computer since they first came out, and I have a backup computer with Serato Scratch/Rane SL1/DVS and my opinions are based on my knowledge about the stuff I use.
@TheSud0
@TheSud0 7 жыл бұрын
+dj-peterofficial I bet NXS2 is absolutely great with the new stuff. I am coming home from a gig atm and I played with HID. Only thing that sucks about the HID is that on Windows PCs it might crash sometime. The sound quality is definitely worse than on USB. It's just easier for me to use a laptop because categorizing my tracks in rekordbox is so long process. A good portable SSD drive would be great thing to have. I mainly play with my Traktor S4, but sometimes CDJs on clubs.
@dj-peterofficial2753
@dj-peterofficial2753 7 жыл бұрын
ZENSE Ok. Good you have a system that works for you. I've had to restart everything when I switched from Vinyl to CD and then again when I started to use USB/rekordbox. To not have to go through the same troubles again, I organize my music entirely in my computer by preferences that works for me. Then I drag those folders in to whatever system I want to use and create matching playlists. For my Serato backup I just update the folders now and then and if an accident would happen to my workstation, I can just drag my in folders in to Rekordbox and a few hours later everything would be in playlists and analyzed again. I don't even use the tags, except for cover arts. I name my files by either BPM or Tonality, sometimes both, depending how I intend to play the music. Doesn't affect the search and make all my music appear the same everywhere. 01B 098 Seeb - What do you love (MASTER EXT)_pn, or 098 Seeb - What do you love (MASTER EXT)_pn. Creates a few doubles but storage is cheap and I've seen to many systems come and go to get stuck in one of them.
@ollygfx
@ollygfx 4 жыл бұрын
por que caralhos alguem com uma nexus ou que seja uma 2000 vai querer usar o traktor kkkkkk
@gioandres772
@gioandres772 8 жыл бұрын
Is the Kontrol Z2 useless in this case?
@KupujtePytle
@KupujtePytle 8 жыл бұрын
not really. considering you have enough usb slots, you can still use z2 as a sound card and cdj units only as hid controllers (in this case you don't need no aggregation of the cdj units).
Setting Up a Pioneer Device for HID Control with TRAKTOR PRO 2 / 3
3:04
لقد سرقت حلوى القطن بشكل خفي لأصنع مصاصة🤫😎
00:33
Cool Tool SHORTS Arabic
Рет қаралды 20 МЛН
Red❤️+Green💚=
00:38
ISSEI / いっせい
Рет қаралды 86 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 51 МЛН
CDJ-2000nexus Traktor 2.6 HID Tutorial
9:56
AlphaTheta / Pioneer DJ Global
Рет қаралды 173 М.
Syncing Drum Machines with Traktor
11:03
DJ TechTools
Рет қаралды 228 М.
What exactly makes the CDJ-900NXS unique?
16:36
Pri yon Joni
Рет қаралды 43 М.
How To Set Up HID Mode With CDJs & Traktor Pro 3 - DJ Tips & Tricks
5:16
3 Mistakes To AVOID On CDJs and Club Setups (Easy Fix!)
11:09
Crossfader
Рет қаралды 146 М.
Key Detection and Harmonic Mixing in TRAKTOR
6:31
NI Support - EN
Рет қаралды 183 М.
How I PLAY: Carl Cox MODEL 1 DJ Set-Up
9:31
PLAYdifferently
Рет қаралды 1,6 МЛН
Recording Your DJ Set: Traktor + Pioneer DJM-900 Mixer
5:39
DJ TechTools
Рет қаралды 65 М.
Sadraddin - Taxi | Official Music Video
3:10
SADRADDIN
Рет қаралды 772 М.
Serik Ibragimov ft IL'HAN - Жарығым (official video) 2024
3:08
Serik Ibragimov
Рет қаралды 175 М.
IL’HAN - Pai-pai (lyric video) 2024
3:24
Ilhan Ihsanov
Рет қаралды 821 М.
Жандос ҚАРЖАУБАЙ - Ауылымды сағындым (official video) 2024
4:25
Kenjebek Nurdolday & Baller - sokpe#сокпе#сөкпе
3:10
Kenjebek Nurdolday
Рет қаралды 145 М.