HOW TO ADD NEW RADIATOR TO HEATING SYSTEM

HOW TO ADD NEW RADIATOR TO HEATING SYSTEM | FULL GUIDE

Рет қаралды 43,722

Күн бұрын

How to fit a radiator to a heating system. Include building a stud wall, pipework, hanging radiator and connecting to the system.
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbingonline.com
🛠 AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberp...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.co.uk/discount/p...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com.au/?ref=PLUMBER10
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbingonline.com
Timestamps:
00:00 How To Add A New Radiator To Existing Heating System
00:36 Description Of The Job
02:21 Flow And Return Pipes
03:18 Pipes Through The Ceiling
05:03 Building Stud Wall
09:33 Reinforce Stud Wall For Radiator
12:37 How To Install Pipes Into Stud Wall
15:20 Plasterboarding
16:01 How To Hang A Radiator
20:50 Connecting Radiator To Pipes
22:17 Connecting Flow And Return Pipes To Heating System
27:12 Fill The Heating System
31:15 Testing New Radiator
33:18 IMPORTANT! Re-Balance The Heating System
41:58 Pump Speed Changes
TWITTER🐤 / plumberparts 🔥
FACEBOOK👉 / plumberparts 🔥
INSTAGRAM📷 / plumberparts 🔥

Пікірлер: 41

@plumberparts 9 ай бұрын

This is a video from a few years back that was once in three seperate episodes. I've joined them together to help people do this whole job easier. If you've seen it before, IGNORE! New video out on Monday (I hope!)

@27forme2 9 ай бұрын

What tune is it ? 32 minutes

@MrDbone75 9 ай бұрын

A very good firday evening to you all from Wellington Somerset

@Mike-ip8hg 9 ай бұрын

Nice job .my daughter's just had all new chrome radiators fitted wow they look amazing...😢 You can fry an egg on them but no heat radiates from them ..can't get the house above 19 degrees wish plumber had mentioned something about chrome rads...

@cloudyeastside 9 ай бұрын

Looking much better in this video than in the newer ones

@tonymurff5234 5 ай бұрын

Brilliant tip on the motors 👍👍🤜🤠

@user-ky7ty3ie1x 9 ай бұрын

Very informative

@michaeljcallaghan78 4 ай бұрын

Great videos mate

@zachmbutcher 9 ай бұрын

9:47 you talk about the flow diverter for the tall rads. Do you recommend a version that can be retrospectively added to an existing rad?

@RichardArblaster 9 ай бұрын

20:55 oooh shots fired 😆😆😆

@rosstrent8595 9 ай бұрын

Cool video as always, didn’t manage to catch the model of SDS Bosch drill, which one is it please?

@TW-mp8zx 7 ай бұрын

If i were to add anything to this video it would be this, Upon turning on the system after re-filling i always put boiler temp down low to minimise overheating which can happen with air going round the system, and once flowing well i would put boiler temp on full load to test that the expansion vessel (if it has one) or that the water level in the F&E tank doesnt reach its limit, as you would be altering the expansion rates, it may also need a larger expansion vessel or to re set the water level in the tank... The IR camera is handy to make sure all radiators are circulating at the same or similar speed. Be mindfull not to restrict the cylinder lockshield loop valve too much as in the summer your boiler would end up cycling on and off way too much. Hot water is designed to take priority and if the boiler water is set higher than the hot water control stat then it will do its job and switch off..

@chackokuttikadan6872 5 ай бұрын

Hello, could you kindly mention the press tool you you are using in this video. I have checked the link you had mentioned but could not find it.

@DanielAttard1 9 ай бұрын

Does anyone know what type of insulation that is under the chipboard? It looks like foil wrapped fiberglass but can't find it anywhere. I'm renovating and think it would be great to put something like that in! Thanks

@navz10015 7 ай бұрын

How would you take the radiator off the wall for painting behind the radiator, as i have the same valves and you cannot move the pipes left or right without damaging the wall.

@atkgrl 6 ай бұрын

What if I want heat in my home in NC and have been considering installing a whole system. Can I just buy an electric boiler, pex and a bunch of radiators?

@riptiz 9 ай бұрын

Not forgetting the new trv’s that you preset for balancing need putting on the feed. Take a photo as well as a diagram. Great video with some good advice.

@scott.whittaker 8 ай бұрын

Have I dreamt a video about a bore hole or is it just still in progress?

@johnadams1976 9 ай бұрын

Oooh i just added one... Wonder if i did it right!!! LOL too late!!

@Benji-gq9gx 2 ай бұрын

How come you built a whole stud wall instead of just chasing pipes into existing wall?

@PlexusJohn 9 ай бұрын

Hang on,,, how did the wall get skimmed and the skirting fixed on.....🤔🤔🤔🤔🤔👍

@SamLTate 2 ай бұрын

How unusual to have insulation between the floors, unless the downstairs room used to be an unheated garage or something?

@johnadams1976 9 ай бұрын

Is it normal to have all that installation under the floor.... My house is 15 years old and has NONE!!! plasterboard ceiling, pipes and wires, chipboard floor

@nivenwoodfine1928 9 ай бұрын

Using buteline is cruel for the next guy that comes for a repair,you horrible bastard 🤣🤣🤣🤣👌🏻

@Alexander_l322 8 ай бұрын

Fuck the next guy lol unless it’s you again!

@steveblewer1202 9 ай бұрын

I've got a question please. How do you get inhibitor into a pressurised system?

@nazhere2393 9 ай бұрын

Depressurise it. Drain some water out then go to the highest radiator and fill it by removing bleed valve and a funnel. Or if you have a magna clean filter, turn both valves off, empty the water out of the filter and fill it with inhibitor.

@peterwagstaff2715 9 ай бұрын

How can you tell if the rad has already got a diverting spring thanks.

@TW-mp8zx 7 ай бұрын

Alot of new designer radiators are flow sensitive and will have a plug 1/3rd the way along from the flow entry point... this helps divert the water upwards.. if the rad isnt marked up as inlet/outlet then the best way to check is to physically look down the connection points or poke something in there. If that makes sense.

@Cagstok 6 ай бұрын

How do you determine how many new radiators your boiler can handle?

@Cagstok 6 ай бұрын

And how do you decide when to use plastic and when to use copper pipe? Thanks.

@MP-ye1to 9 ай бұрын

Would of been easier if you had a laser 🤷🏼‍♂️👍

@27forme2 9 ай бұрын

This is already been posted

@nbessell 9 ай бұрын

Clock in the kitchen says 2020 😉

@shilks8773 9 ай бұрын

Unimpressed with the piping that goes up to the Rad at 24:20. In my opinion it's far too close to the skirting and has a horrible looking bend in it. Would be better for looks and future skirting painting if it was away away from the skirting.

@smclish 7 ай бұрын

James too many ad breaks

@Swwils 9 ай бұрын

Adding a radiator to a heating system requires building control signoff.

@plumberparts 9 ай бұрын

Ha! Clown world isn’t it? 😂

@Swwils 9 ай бұрын

@@plumberparts I don't know why this is the case but I would imagine it's to try to avoid people adding radiators from the main houses system to something like a uninsulated conservatory.

@stevee8698 7 ай бұрын

Ooh James James James. Nooo ! What if you were in a meeting and the speaker referred to everybody as "YOU GIRLS". Do you think all the men would object so much. Can you now see that saying "YOU GUYS" is so sexist and demeaning to women. If I was a woman, I wouldn't want to be classed as a guy. Please show that you care by getting onboard to stop this and give women their space with kindness. 🤔 Okay people.

@atkgrl 6 ай бұрын

What if I want heat in my home in NC and have been considering installing a whole system. Can I just buy an electric boiler, pex and a bunch of radiators?