Pocket Hugs | Cloud technique in Resin | Alcohol Ink | JDiction Epoxy and UV Resins

  Рет қаралды 60,572

JOTZ designs

JOTZ designs

2 жыл бұрын

Hi! Welcome to my channel!
In this video I wanted to make some pocket hugs, and try out the cloud effect with JDiction's epoxy resin that is a newer formula than what I've show on my channel before.
LINKS TO MY ART, PRODUCTS USED, DISCOUNTS & MORE ARE LISTED BELOW!
If you have questions, please let me know in the comments! Please click the thumbs up and subscribe button, and click the bell to know when I upload videos!
Thanks for watching!
Elisa
(pronounced EE-leesah)
😊
#resinart #fluidart #homedecor #functionalart #learntoresin #resinartist #pourart #diy #crafting #epoxy #abstract #pockethug #pockethugs #pockethearts #easydiy #jdiction #epoxyanduvresin
*****************************************
SHOP - SUPPORT - SOCIAL MEDIA
*****************************************
If you would like to see my gallery, want to help support my channel and keep it going, and/or get to my social media, check out this link!
linktr.ee/jotzdesigns
ALL help is greatly appreciated, and goes back into making videos for you!
**************
DISCOUNTS!
**************
Dryer Day's Art Studio
Discount Code: JOTZD (Does not include boards)
www.dryerdaysartstudio.com/
********
JDiction
Discount Code: JOTZ10
jdiction.online/?ref=ibdxu5e75h
********
Into Resin
Discount Code: JOTZ10
www.intoresin.com/?ref=03rfcx...
********
Laura's Art Corner (Le Rez Expressions)
Discount Code: JOTZ10%
laurasartcorner.net/
********
Let’s Resin
Amazon
Discount code 1 (liquids/powders): ELISA2024
Discount code 2 (molds/tools): ELSA2410
amzn.to/3NM6vW1
Let’s Resin website code - JOTZD
USA
letsresin.com/?ref=JOTZdesign...
UK
letsresin.co.uk/?ref=JOTZdesigns
Canada
letsresin.ca/?ref=JOTZdesigns
********
NicPro
Discount Code for epoxy: Elisa10% (NicPro site only)
nicpro.com/
amzn.to/3trOWDd
********
Washi Tape Store
Discount Code: JOTZ10
www.thewashitapeshop.com?aff=1330
**********
PRODUCTS & SUPPLIES USED
**********
I get many of the products I use from Amazon, and I have them (and more!) listed in my AMAZON SHOP! Check it out, there's a LOT, and I'm always adding more!
amazon.com/shop/jotzdesigns
**PRODUCTS NOT FROM AMAZON**
If you don't see something in my Amazon shop, or listed below, please let me know in the comments, and I'll get you the information if I can!
__RESIN__
JDiction
Code: JOTZ10 for 10% off!
jdiction.online/?ref=ibdxu5e75h
or buy on Amazon
Epoxy (3x UV protectant) - amzn.to/3MkiBTw
UV Resin - amzn.to/3GjopZV
__COLORS__
Dryer Days Art Studio - Code: JOTZD - Celestial Sparkler, Violet Chameleon powder - www.dryerdaysartstudio.com/
Let’s Resin Translucent pigments - amzn.to/3MkMl2r
Jacquard Pinata Alcohol Ink - amzn.to/48kEsVM
__SUPPLIES__
amazon.com/shop/jotzdesigns
Bottles (Empty) Black, nail polish - amzn.to/3dq3HuX
Cups - 1oz medicine - amzn.to/2CZGC0f
Cups - 2oz shot glass - amzn.to/3p0k0Vt
Food tents - amzn.to/2LGrCLz
Freezer paper - amzn.to/34QFk4n
Hot glue gun - mini - amzn.to/3wf5bSV
Isopropyl Alcohol 99% - amzn.to/2ZckQ6E
Level small - amzn.to/3q9QUBQ
Lighter - long - amzn.to/3rBJ8kS
Mold - Silicone hearts - amzn.to/3L8rdMM
Nitrile Gloves - amzn.to/3Gc0b3O
Paper - Metallic Cardstock - amzn.to/42jk03R
Paper Punch - round corners - amzn.to/3No0VXj
Paper towels - Blue - amzn.to/3rgxCe5
Plastic Cosmetic Spatulas 3" angled - amzn.to/3Gr8qZi
Scissors - curved - amzn.to/3wtguGi
Silicone cups - mini heart - amzn.to/3dqfFoE
Torch - amzn.to/2FGJVKy
Wood Craft Sticks - 3.5" (pointed on one end) - amzn.to/2Np9Uxa
**********
**As an Amazon Influencer, and Affiliate of those listed above, I earn a tiny bit from qualifying purchases at no additional cost to you! By making a purchase using the links and discount codes above, you help me grow as an artist!! Those companies will give me little something back as a thank you for sending you their way, which in turn helps me keep my channel going!
**My videos are to show how I like to create my art and crafts and the materials I like to use or test. Follow all safety instructions from the manufacturers, as I can not be held liable for your safety.
**********
MUSIC:
Too Far From Home - Wondershare Filmora stock
Acoustic Happy Folk - Wondershare Filmora stock
Teardrop Sky - Wondershare Filmora stock

Пікірлер: 168
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks for watching! 😊❤ Links for products and discounts in the description!
@llamasugar5478
@llamasugar5478 Жыл бұрын
Does one *have* to use UV resin to do this style project? I only have regular.
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Regular epoxy resin is what will work for this project. You can also use it to seal the backsides. I just used UV resin on the back because it’s faster. Thanks for watching!
@llamasugar5478
@llamasugar5478 Жыл бұрын
Thank you!
@konosaka1910
@konosaka1910 Жыл бұрын
To be honest, this is the best and easiest video on alcohol inks
@JOTZdesigns
@JOTZdesigns Жыл бұрын
That’s great to hear! I’ll glad it’s useful! Thanks for watching!
@GinaBeana_Tootsie
@GinaBeana_Tootsie 2 жыл бұрын
Wow Elisa that was wonderful they are so pretty pocket hugs that is great 😊🐈‍⬛💜✌🏼
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thanks Gina! 🧡☺️ Thank you for watching!
@helloitisme4280
@helloitisme4280 2 жыл бұрын
I need to try this effect! I think yours turned out better than most I’ve seen before!
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you so much! Definitely try it out!! Thanks for watching!
@bevwood6760
@bevwood6760 2 жыл бұрын
They are beautiful. You make it look so easy.
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you! Resin is easy and hard all at the same time! 😂😂 Thanks for watching! 🧡☺️
@janeharvey3988
@janeharvey3988 2 жыл бұрын
Great that you could share this!
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@mandicoleman7433
@mandicoleman7433 2 жыл бұрын
They're all beautiful 😍 ❤
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@pgold6119
@pgold6119 2 жыл бұрын
I love these! So cute!
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thanks! Fun to do, too! Thank you for watcing!
@kim99may
@kim99may Жыл бұрын
They are gorgeous. Love the corner punch. ❤❤❤❤❤❤❤❤❤
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! That corner punch is so handy! Thanks for watching! ☺️🧡
@kristenmedrano135
@kristenmedrano135 11 ай бұрын
I'm so happy your video popped up as a suggestion. This was so fun to watch!!! I am grateful for you showing the beginning to end of making pocket hugs. THANK YOU!!!!!
@JOTZdesigns
@JOTZdesigns 11 ай бұрын
I’m happy to share! 🧡☺️ Thanks for watching!
@malikat4
@malikat4 Жыл бұрын
Absolutely gorgeous!! You inspired me to do a similar idea, Bear Hugs!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Sounds great! 🧡☺️ Thanks for watching!
@floydc3664
@floydc3664 Жыл бұрын
Oh my! Those are beautiful
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks so much! ☺️🧡 Thank you for watching!
@lechatbotte.
@lechatbotte. Жыл бұрын
This just popped up in my feed what gorgeous resin work Elisa
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks, Linda! 🧡☺️ Thank you for watching!
@mariangies
@mariangies Жыл бұрын
Just discovered your channel and I’m so glad. Love all the tips. And the hearts look absolutely beautiful. Tfs. New like and subscriber.
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you, and welcome! ☺️🧡 Thanks for watching!
@angiebcraftsdesign
@angiebcraftsdesign 2 жыл бұрын
Beautiful! I was intending to ask how you got these resin hearts to stick to the display cards once I was finished watching... only to be delighted that you showed us! Wonderful result, very informative video! Thank you so much! ☁ + 💗 - that cloud technique comes out looking marvelous!
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you!! ☺️🧡 After I made that video, I purchased these removable adhesive dots. I’m lazy and don’t want to wait for the hot glue gun anymore, (or deal with those silly stringy bits that come off and get stuck to EVERYTHING!)! These are what I got, in case you’re interested! Thanks for watching! amzn.to/3sRsv7r
@Renee_Firebrand
@Renee_Firebrand 2 жыл бұрын
Very pretty!
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@marylett2224
@marylett2224 Жыл бұрын
So cute ☺️
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! ☺️🧡 Thank you for watching!
@naptimecreations
@naptimecreations 2 жыл бұрын
They turned out so pretty 💙💜💟🤗
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thanks, Tish! You’re the master at it, so you should know! 😃🧡☺️
@naptimecreations
@naptimecreations 2 жыл бұрын
@@JOTZdesigns 😅😅😅 I havent done it in a long time but you inspired me to have a go at it again 🤗💗
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Do it!!!!! 🧡
@naptimecreations
@naptimecreations 2 жыл бұрын
@@JOTZdesigns 🤗🤗🤗🤗🤗
@Mummabearscrafts4u
@Mummabearscrafts4u Жыл бұрын
These are beautiful 🤩
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! ☺️🧡 Thanks for watching!
@traceyhilder3426
@traceyhilder3426 2 жыл бұрын
So fabulous
@JOTZdesigns
@JOTZdesigns 2 жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@cristinateodora11
@cristinateodora11 7 күн бұрын
Beautiful 😍
@JOTZdesigns
@JOTZdesigns 6 күн бұрын
Thanks! 🧡😊 Thank you for watching!
@chantalc.5708
@chantalc.5708 17 күн бұрын
👏👏👏👏👏👏
@JOTZdesigns
@JOTZdesigns 17 күн бұрын
Thanks! 😊😊 Thank you for watching!
@bethanieferguson2206
@bethanieferguson2206 Жыл бұрын
Lovely ❤️
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@deborahol
@deborahol Жыл бұрын
They're gorgeous 😍
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@carmencamino9040
@carmencamino9040 Жыл бұрын
So beautiful. Tks for sharing.
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! I’m happy to share! ☺️🧡 Thanks for watching!
@zina6581
@zina6581 7 ай бұрын
Sweet!
@JOTZdesigns
@JOTZdesigns 7 ай бұрын
Thank you!
@marciab7616
@marciab7616 Жыл бұрын
Amei seu trabalho. Obrigada por compartilhar.
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@kathybray7156
@kathybray7156 6 ай бұрын
Sweet ❤😂
@JOTZdesigns
@JOTZdesigns 6 ай бұрын
Thank you! 🧡☺️ Thanks for watching!
@magicepoxy4496
@magicepoxy4496 Жыл бұрын
Thank you! So beautiful 💕
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you so much! 🧡☺️ Thanks for watching!
@pjfoltz8810
@pjfoltz8810 Жыл бұрын
Love the colors! # new subscriber!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks! 🧡☺️ Thank you for watching!
@margaretmathis4775
@margaretmathis4775 8 ай бұрын
Gorgeous❣️
@JOTZdesigns
@JOTZdesigns 7 ай бұрын
Thank you! 🧡☺️ Thanks for watching!
@purpleunicorndreams6794
@purpleunicorndreams6794 Жыл бұрын
Beautiful!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks! ☺️🧡 Thank you for watching!
@KarenYauney
@KarenYauney 3 ай бұрын
WONDERFUL!!❤
@JOTZdesigns
@JOTZdesigns 3 ай бұрын
Thanks! 🧡☺️ Thank you for watching!
@pquack51
@pquack51 Жыл бұрын
These are beautiful! TYFS!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@ChesneyAdventures
@ChesneyAdventures Жыл бұрын
Beautiful!!!!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@DorisAtDFDesigns
@DorisAtDFDesigns Жыл бұрын
Cool 😎 ❤️❤️❤️
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks, Doris! 🧡☺️
@miriamluskberry
@miriamluskberry 2 ай бұрын
Absolutely beautiful
@JOTZdesigns
@JOTZdesigns 2 ай бұрын
Thank you! 🧡😊 Thanks for watching!
@eclectictreasures955
@eclectictreasures955 Жыл бұрын
Beautiful
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks! 🧡☺️ Thank you for watching!
@jostulove
@jostulove 8 ай бұрын
Hi, these are absolutely gorgeous ❤ Thank you for sharing x
@JOTZdesigns
@JOTZdesigns 8 ай бұрын
Thanks! 🧡☺️ Thank you for watching!
@suzimonkey345
@suzimonkey345 8 ай бұрын
Thank you!
@JOTZdesigns
@JOTZdesigns 7 ай бұрын
You’re welcome! ☺️🧡 Thanks for watching!
@srhelpers2687
@srhelpers2687 7 ай бұрын
Fenominal , great job. Love you
@JOTZdesigns
@JOTZdesigns 7 ай бұрын
Thanks, Lisa! I hope you’re getting ready for the cold weather! 🧡☺️ Thanks for watching!
@GaryMcKinnonUFO
@GaryMcKinnonUFO 3 ай бұрын
Very cool indeed, i learned half a dozen things just from this one video! Thanks from a beginner, liked and subbed :)
@JOTZdesigns
@JOTZdesigns 3 ай бұрын
I’m glad it was so useful for you! 🧡☺️ Thanks for watching and subbing!
@elizabethvallely4044
@elizabethvallely4044 9 ай бұрын
They turn out beautiful! Thank you for sharing! 😊
@JOTZdesigns
@JOTZdesigns 9 ай бұрын
Thank you! 🧡☺️ Thanks for watching!
@elizabethvallely4044
@elizabethvallely4044 9 ай бұрын
@@JOTZdesigns You are very welcome! 😊💚
@tracywilliams61
@tracywilliams61 Жыл бұрын
Love
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@babarkhan8146
@babarkhan8146 8 ай бұрын
Nice
@JOTZdesigns
@JOTZdesigns 8 ай бұрын
Thank you! 🧡🙂 Thanks for watching!
@eva1tori723
@eva1tori723 28 күн бұрын
Cool
@JOTZdesigns
@JOTZdesigns 24 күн бұрын
Thank you! 🧡😊 Thanks for watching!
@ameerael-youssef8380
@ameerael-youssef8380 2 ай бұрын
Really very nice ❤
@JOTZdesigns
@JOTZdesigns 2 ай бұрын
Thank you! 🧡😊 Thanks for watching!
@pjshat
@pjshat Жыл бұрын
Your videos are great! I hope you do more. 😁
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! I will for sure, I just have very little time nowadays, unfortunately. 😢 Thanks for watching! ☺️🧡
@KarenYauney
@KarenYauney Жыл бұрын
What a Blessed talent you have ❤❤
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! 🧡☺️ Thanks for watching!
@sharrondawson9548
@sharrondawson9548 8 ай бұрын
I’ve used this resin it’s really good
@JOTZdesigns
@JOTZdesigns 8 ай бұрын
Definitely one of my favorites! ☺️🧡 Thanks for watching!
@patvalenzuela5105
@patvalenzuela5105 9 ай бұрын
They are darling anyone would love to receive one, fantastic!
@JOTZdesigns
@JOTZdesigns 9 ай бұрын
Thanks so much! 🧡☺️ Thank you for watching!
@linseydiggett747
@linseydiggett747 Ай бұрын
Hi, these are lovely. Can i ask what mould you used please? X
@lindao7887
@lindao7887 Жыл бұрын
I guess I live in these four walls, but can you tell me what a "pocket hug" is? They are beautiful by the way! 🤩
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks! Pocket hugs are gifts you give someone for them to keep in their pocket as a hug from you when you cannot be with them. The cards they are on say “Here is a pocket hug from me to you. Hold it close to your heart and feel my love when we are apart.” Thanks for watching!
@bethanieferguson2206
@bethanieferguson2206 Жыл бұрын
So funny you say that four walls. Think that terminology I have used too. Lol sometimes I refer to it as my dungeon or prison. A. K. A. My bedroom especially during covid times. When I isolated myself so I would not get it. Seems like it might have worked. Idk thought after reading medical articles. It seems some people are just more genetically fit to get covid as other people aren't. Luck of the draw I guess. Beyond that pocket hugs are cute. They also take on several other shapes as well besides hearts. Like angle shapes moons stars or I'm sure whatever other shape is possible to do. I have a clear oval shaped one with a little angle like statue on the inside. I have it for when my sister passed away in 2020. Basically they can take on anything that seems to settle ones mind or for anything we have lost or gained. Whatever you deem the pieces to be to you really. The mind is a incredible object and so is an imagination. ❤️
@yvonne1960100
@yvonne1960100 3 ай бұрын
echt prachtig!!!
@JOTZdesigns
@JOTZdesigns 3 ай бұрын
Thanks! ♥️🐾 Thank you for watching!
@mkfranklin2179
@mkfranklin2179 3 ай бұрын
I just love them! So much fun to do. My hearts always stick to the silicone even when i dont use a heat gun! Ugh
@JOTZdesigns
@JOTZdesigns 3 ай бұрын
Thanks! Are you using any other source of heat, or warming your resin in any way? Could just be the mold is past its prime. Thanks for watching! 🧡☺️
@jennkaer8552
@jennkaer8552 9 ай бұрын
Brilliant video! Thanks for sharing. I just started making pocket hugs with bears but i do have that same heart mold. Can I ask why you put UV resin on the backs of the hearts?
@JOTZdesigns
@JOTZdesigns 9 ай бұрын
Thanks! The main reason of putting the UV resin on the back is to seal in the inks and fill in the shallow cavity that may have been created once the resin cured. I more often than not use UV resin because it’s virtually instant, but you can also use Epoxy resin, especially if you want an opaque color - or you could paint the back and use UV resin still. Thanks for watching! ☺️🧡
@charlottehawk3766
@charlottehawk3766 Жыл бұрын
Oh my, I love these. I have UV Resin (and Epoxy Resin), can I do this type of design by just using the UV Resin?
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks! It would probably not turn out well if you tried with UV resin. It’s really because of how differently it cures than epoxy. Always worth a try, though. One other thing is epoxy resin is definitely more cost effective than UV resin. Check out this video to see how alcohol inks in UV resin can be a pain. Thanks for watching! 🧡☺️ Alcohol Inks and Silicone Oil in UV resin | Petri effect tutorial | Tips kzfaq.info/get/bejne/q7F9qrOeus6YZ6c.html
@dianerevelle3860
@dianerevelle3860 Жыл бұрын
Really lovely!! Does the glue gun glue come away easily from the resin when removing the card? Thx
@JOTZdesigns
@JOTZdesigns Жыл бұрын
It does! Though there are times I’ve noticed it may leave a mark because of the heat softening the resin slightly. I’ve switched to using Adhesive dots (removable) - amzn.to/3UmCcHq Thanks for watching!
@raquelreyes8573
@raquelreyes8573 5 ай бұрын
Hi i just love this video can i use epoxy pigment ink by Let's Resin that is resin brand i am using i am a beginner and would like to learn more specially how to measure the correct amount of resin most came out sticky and i don't know how to fix it thank you for this video
@JOTZdesigns
@JOTZdesigns 5 ай бұрын
I used alcohol inks in these. Alcohol inks and pigment inks are different. Completely different result. It’s especially due to the white Pinata Blanco Blanco that creates this effect. Let’s Resin does have a sinker white that should work similarly, but I have not tried that one yet. As for mixing, you need to follow the resin’s directions. Let’s resin has several resins. If it’s 1:1 by volume then you measure 1 part A into 1 part B in a measuring cup (ie. 2oz of each) If it’s 2:1 by volume then you mix 2 parts A into 1 part B in a measuring cup (ie. 2oz A and 1oz B) If it’s by weight then you do the same as above except you go by what the scale says, not the cup. Check out this video on mixing. It’s for 2:1, but once you’ve got both parts in the cup it’s mixed the same. kzfaq.info/get/bejne/p9xyeppi3LHKZ4E.htmlsi=-aGagNzcGkfq9v4k Hope that helps! Thanks for watching!
@taminlove200358
@taminlove200358 2 ай бұрын
Thanks i was wondering if i could just use my white alcohol inks as the sinking 😊
@JOTZdesigns
@JOTZdesigns 2 ай бұрын
Thanks for watching! 🧡😊 Keep in mind that not all white alcohol inks are created equal and will work. If you have something besides Pinata Blanco Blanco I’d recommend doing a test run before any important projects.
@raquelreyes8573
@raquelreyes8573 5 ай бұрын
Hi Raquel here from Puerto Rico Thank you so much for this information I am going to try it i have a question I was doing a little heart earring and I use the pigment inks with UV let's resin why did it not cure inside what it look on top was like a thin lay of ink in the mode any why thank you for your prompt reply God Bless you and Merry Christmas to all your family
@JOTZdesigns
@JOTZdesigns 5 ай бұрын
UV resin is another beast all together. The key is UV light. If you add anything opaque to it then you run the chance of the resin not curing because the UV light can’t get through to cure the resin. This can be anything from pigments, too much mica powder or glitters, and embellishments, etc. If you’re using a silicone mold, it needs to be the translucent kind (kind of a white-ish clear). Again, the UV light needs to penetrate to cure the resin. Check out my UV resin videos for some tips and to see some things I’ve used and how. Hope that helps! kzfaq.info/sun/PLx7Pf5A8e8pyF4XBbTtozJoMzyzK8rfmU&si=gUU5xK2hPf7mJK4s
@Rdcbh
@Rdcbh Жыл бұрын
They are just beautiful ❤️. What kind of paper do use use and how do you print your saying and Logo? Thank you
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! The paper I use is a metallic cardstock I got from Amazon amzn.to/42jk03R. I apologize for not having the link in my description before this! I have a laser printer that I use, but any printer will work! Thanks for watching!
@debcirrincione1902
@debcirrincione1902 Жыл бұрын
@@JOTZdesigns Thank you and all the g\best ❤
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thanks! Same to you! ☺️
@MikeAnderson-jd2rw
@MikeAnderson-jd2rw 2 ай бұрын
I like the backs of them better. :)
@JOTZdesigns
@JOTZdesigns 2 ай бұрын
I am often torn between which I like better, but that’s why I like putting clear in the back instead of a solid color so that both are still visible! 😊🧡 Thanks for watching!
@stacyhawkins1878
@stacyhawkins1878 Жыл бұрын
Best video I have found for beginners, but what I don't understand is, what is the difference between using epoxy mix, vs just resin? Please help
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! “Resin” is what people generally say nowadays when taking about epoxy resin art. There are tons of kinds of resin. Epoxy resin is a two part resin, and is just the one used more often for art purposes. Side note to that, there are epoxy resins with UV inhibitors (meaning it will take longer to yellow over time - ALL resins yellow), and there is UV resin which is a one part resin and only cures with UV light from the sun or a lamp. Many people assume they are the same thing, and they certainly are not. Thanks for watching!
@stacyhawkins1878
@stacyhawkins1878 Жыл бұрын
@@JOTZdesigns thank you
@JOTZdesigns
@JOTZdesigns Жыл бұрын
You’re welcome!
@user-xv8ck5yi9n
@user-xv8ck5yi9n 9 ай бұрын
What kind of resin do you use
@terigrubbs6344
@terigrubbs6344 Жыл бұрын
I love your videos! Thank you so much for sharing your talent. ❤️ Wondering if you would know why my hearts stick to the sides and bottom of my silicone mold? I’m using one like yours. I mix the resin properly because I resin other items and pour any leftovers into the mold right away. But the bottoms and sometimes the sides stick to the molds and it’s ruining them! Any help appreciated!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Thank you! I’m happy to share! Usually when resin sticks to molds it’s because too much heat was used. Do you use a torch or heat gun to pop bubbles? What is your exact process?
@terigrubbs6344
@terigrubbs6344 Жыл бұрын
@@JOTZdesigns I poured the resin the molds. Dropped some alcohol inks into the resin. Added a little white and stirred with toothpick-tried not to touch the bottom of the mold. Used torch to QUICKLY pop bubbles. 24 hours later, I tried take them out. 4 of them were stuck to the bottom of the mold and another 3 stuck to the sides. I have had great success with resining my painted tiles and canvasses. However, the silicone molds always give me this grief! Lol Could it be caused from hitting the bottom of the mold with toothpick? Do you torch to pop bubbles? Thank you so much for your help!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Touching the mold with the toothpick would not cause this, but it could cause scratches that show on the cured resin. I’ve used a torch to pop bubbles, but I avoid touching the mold with the flame because that will most likely cause it to stick. Alcohol ink is very flammable, and I do not recommend using a torch or any heat after adding alcohol inks in a mold. It’s quite possible that since you used such a shallow mold, it caught on fire when your torched it (even inside where you could not see it), causing it to stick. Usually it’s too much heat that would cause resin to stick to silicone. It can even happen when you don’t even use any heat, but the resin flash cures. That can be cause by letting it sit too long in the mixing container, or even adding too much colorant - especially water-based colorant. I’d recommend not adding any heat after adding alcohol inks. Pour the clear, and get rid of bubbles with a heat gun - still being careful to not make it too hot. You can reduce bubbles by mixing slowly and with plastic or silicone sticks - wood creates bubbles. Using a thinner resin helps with bubbles too. Another thing to try is mold release. I’ve never actually used it, but I know many people who have and use it all the time. Here’s a link to Castin’ Craft’s version. I think you can get this at Hobby Lobby, too. amzn.to/3Po1uAO Hope this helps!
@terigrubbs6344
@terigrubbs6344 Жыл бұрын
@@JOTZdesigns you’re the best! Thank you so much! I’ll give all of the above a try. ❤️
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Happy to help! Good luck!
@Lee6363
@Lee6363 Жыл бұрын
I wish I could do this effect. Doesnt matter how I use the pinata inks and blanco, a film and clumps end up on the surface. Whether its the inks creating a film or the white binding everything up I've not figured it out - I've tried stirring straight away, leaving it to thicken, only using 1 drop of colour etc. Its almost like the film or clumping happens instantly. Using normal Let's resin thin/medium visc resin in a warm water bath before mixing too. You can see it starting to happen in the middle heart expect it happens to every one I do.
@JOTZdesigns
@JOTZdesigns Жыл бұрын
Hi! Thanks for watching! I get the same film/clumps when I do this. It's harder to tell in the videos because I have it sped up, but it's totally normal. You want to make sure that you leave it there after you swirl with a toothpick, otherwise you'll take out most of the color. I'd also recommend not using a warm water bath, at least not for these. I've never had success with warming the resin, it might be my high altitude or lack of humidity, I don't know, but I do know that every time I have tried it my project is ruined in some way. I haven't tried the Let's Resin resin with these yet, but I don't think it would make a huge difference. I mention the clumping in this video starting about 3:40. Also see it in this video at 3:15 kzfaq.info/get/bejne/Y8p_asSA266ZeZs.html Also see it in this video 2:40 kzfaq.info/get/bejne/eK6ForJqkrbOn40.html
@Lee6363
@Lee6363 Жыл бұрын
@@JOTZdesigns Hi, thanks very much for the reply. I'll try without the water bath and see how that affects things. My clumping is exactly like the bottom blue one you linked in the 2nd video link above - its almost like an instant reaction when the white drops on the ink. Thanks again for the inspiration in the vids!
@JOTZdesigns
@JOTZdesigns Жыл бұрын
The bottom right one? The one I take out at about 4:02? Definitely had some clumping on that one, and the one above it (and taken out just before it). They still worked though. Alcohol and resin resist each other (same with silicone oil), and that's what causes the effects you get, and the clumping. Definitely normal! Good luck!
@KarenYauney
@KarenYauney Жыл бұрын
Can this be done indoors an do you need a mask?
@JOTZdesigns
@JOTZdesigns Жыл бұрын
It can be done indoors. When working with epoxy resin it’s always recommended to have good ventilation, and to wear a respirator and gloves.
@wendybond2848
@wendybond2848 Ай бұрын
Lovely but the video was a bit fast for me. I missed why you had to paint them again with resin after they partially cured.
@JOTZdesigns
@JOTZdesigns Ай бұрын
I’m not sure exactly what you mean. Do you mean the UV resin I used to seal the backs? That’s the only time I added additional resin, but the pieces were cured when I did that. I mention I’m using the UV resin to seal the backs at 5:20. If videos are too fast for you, you can slow the speed down by click on the gear icon when you tap the video and change playback settings. You can also turn on the CC (closed captions) if what is said is too fast or an hard to understand. Hope that helps! 😊🧡 Thanks for watching!
@stacikspencer
@stacikspencer Ай бұрын
The hot glue doesn't stick to the back of the heart when someone peels it off?
@JOTZdesigns
@JOTZdesigns Ай бұрын
The glue peels off the heart as well. Because of the heat, if you haven’t let the resin cure for 30 days you might get an indent/mark, but that can be removed with a heat gun. If you don’t want to use hot glue you can use removable adhesive dots like these (linked below), but they’re not very strong and the hearts can easily fall off the card. Thanks for watching! amzn.to/3UmCcHq
@stacikspencer
@stacikspencer Ай бұрын
@@JOTZdesigns okay Thank you!! 😀
@ashleycortez30
@ashleycortez30 Жыл бұрын
Do you sell these pocket hugs? If so can I get the link please
@JOTZdesigns
@JOTZdesigns Жыл бұрын
I’m sorry, I currently am not selling these. Thanks for watching!
@user-xv8ck5yi9n
@user-xv8ck5yi9n 9 ай бұрын
How much do you sell them for
@JOTZdesigns
@JOTZdesigns 9 ай бұрын
I’ve sold these specific ones $8. Thanks for watching!
@baller-vh2kn
@baller-vh2kn 9 ай бұрын
How much can u earn?
@JOTZdesigns
@JOTZdesigns 9 ай бұрын
I have sold these for $8. Thanks for watching!
@jackswicegoodiii9227
@jackswicegoodiii9227 7 ай бұрын
$8/ piece or $8 total?
@JOTZdesigns
@JOTZdesigns 7 ай бұрын
Each.
@user-wj2oj8te5h
@user-wj2oj8te5h 2 ай бұрын
How much
@JOTZdesigns
@JOTZdesigns 2 ай бұрын
Could you please clarify? How much of what?
@user-xv8ck5yi9n
@user-xv8ck5yi9n 9 ай бұрын
What kind of resin do you use
@JOTZdesigns
@JOTZdesigns 9 ай бұрын
I use JDiction. You can see exactly which ones at 0:19 & 5:25. Thanks for watching!
#1184 Gorgeous Resin Cloud Effect Petri Feathery technique
25:17
Pouring Your Heart Out
Рет қаралды 117 М.
How To Make A Northern Lights Resin Pendant
13:52
Bouncing Off The Walls Resin Art
Рет қаралды 25 М.
КАХА и Джин 2
00:36
К-Media
Рет қаралды 4,1 МЛН
New Gadgets! Bycycle 4.0 🚲 #shorts
00:14
BongBee Family
Рет қаралды 9 МЛН
ХОТЯ БЫ КИНОДА 2 - официальный фильм
1:35:34
ХОТЯ БЫ В КИНО
Рет қаралды 2,5 МЛН
КАРМАНЧИК 2 СЕЗОН 6 СЕРИЯ
21:57
Inter Production
Рет қаралды 437 М.
Why I Regret Not Using Vaseline With Resin and  Sooner
10:22
Steve McDonald Arts and Crafts
Рет қаралды 85 М.
【雫ぷっくりはこうやる】人魚の耳飾り〜mermaid earrings〜
11:16
Куда мы с Никой поехали?
0:41
Привет, Я Ника!
Рет қаралды 1,3 МЛН
How to sign the letter J?❤️
0:47
Signature_1m
Рет қаралды 52 МЛН
会变色的西施龙凤凤鸣壶#凤鸣壶 #西施壶
0:52
壶棚杯友
Рет қаралды 21 МЛН
Forging a cool BBQ Fork
1:00
Rust Legion
Рет қаралды 13 МЛН
Они хотели КОЛУ!🤪 inst: psawkin
1:00
Petr Savkin
Рет қаралды 2,8 МЛН