Jeremy has done a multitude of amazing things on this channel, but delivering the line "Isn't it uncomfortable to have six inches of wood in your pants?" with a straight face is by far the most impressive... 👏👏👏🤣
@Jer_Schmidt5 жыл бұрын
Yeah, probably the most challenging thing I’ve done here. ;-) I made more attempts at that line than I did at the rule sheath.
@harrydavis69035 жыл бұрын
I almost spit my coffee out when he said that. It was a great laugh.
@393strokedcoupe5 жыл бұрын
@@boblablah I'm 42, and that line with the straight face cracked me up!
@edwinleach40135 жыл бұрын
Good one.
@kappagrapes5 жыл бұрын
I also appreciated the casual thoughtfulness of "I don't *plan* to eat this thing..." I watch this channel for the straightforwardly explained, solidly practical build process content, but I have to admit the exquisitely delivered subtle comedy is a big plus.
@tomroeder73485 жыл бұрын
Six inches of wood in your pants...I laughed a little too hard at that. Great video, as always.
@__adj5 жыл бұрын
I have no idea how he maintained a straight face saying this
@brianwalk1085 жыл бұрын
@@__adj I cant even keep a straight face replying about it...
@theclayton385 жыл бұрын
i died laughing hahaha
@digitaIgorilla5 жыл бұрын
I find the full range of motion is reduced slightly, but my girlfriend doesn't complain. 😶
@srdavis375 жыл бұрын
And he delivers the line so smoothly! Well done, Jeremy.
@MultiKlompen4 жыл бұрын
JER, WHERE ARE YOU? WE ALL MISS YOUR VIDEOS!
@marcusv.4433 жыл бұрын
ya
@kramerdesign94435 жыл бұрын
That debris clearing slot that's cleared by the ruler itself It's one of those moments when you lean back in your chair and say, "Dang, this guy is _good_ ."
@justkiddin19805 жыл бұрын
Yeah i have to say there was a nod of appreciation...😂
@ExplorinDoranRBrown Жыл бұрын
Me too, I threw my body back and I exclaimed out loud, to my dog I guess, “Oh my! This guy is a genius”
@longlowdog5 жыл бұрын
The explanation of how so much thought and trial and error goes in to something that at first glance appears so simple goes a long way to explain why artisan products cost more than mass produced vacuum formed plastics. Heck, I'm not even a joiner/carpenter/cabinet maker and I want something that beautifu-nctional so I can E.D.C a precision rule. Wonderful video produced by a skilled yet humble person. Regards from Scotland.
@Jer_Schmidt5 жыл бұрын
Thank you!
@6minutemedia5435 жыл бұрын
Bravo to the person honest enough to show their mistakes. Lovely project.
@nestorknoxs37954 жыл бұрын
Hello, are you going to be making any videos ant time soon?
@robertbutler8004 Жыл бұрын
6 Minutes Media agreed I'm sure that a lot of mistakes are made by others and they do not show that they can make mistakes as we all do.
@popgrubbs3 жыл бұрын
Jeremy, my wife and I were talking about you last night and we agreed that we wanted to send you a word of encouragement. If your hiatus is permanent, that's totally cool. We want you to know that we very much appreciate what you already have done and how you have helped many people with your examples and instructions. I know I would be proud if you were our son. We do realize that having a following audience is not an easy thing. Keeping some distance from all of us at times is an important thing to do. We want you to know that we are praying for you and hope that God leads you on a path that is rewarding for you wherever that path takes you.
@marcusv.4433 жыл бұрын
You know what happend with him?
@Bambinohead15 жыл бұрын
Excellent video. I love the attention to detail and the fact that you showed your mistakes. The finished product is a really beautiful piece.
@MgBaggg5 жыл бұрын
Drop everything, a Jeremy Schmidt upload
@AquaPeet5 жыл бұрын
Thanks, now I dropped my phone! ;-)
@oobaka19675 жыл бұрын
You're damn right.
@petercurtis92975 жыл бұрын
I was eating dinner when my phone went off. I'm not allowed a phone a dinner time but my wife said it's from Jeremy. I dropped my knife and fork and cast the vid to my tv. As usual, the vid is superb. Thanks for all your hard work.
@Jer_Schmidt5 жыл бұрын
Thank you! :-)
@willieobermann15285 жыл бұрын
This video was amazing. The quality of your work is ALSO amazing. Thanks for sharing your videos with us.
@mayflowerlash115 жыл бұрын
Everything from a 2 ton steel circular bench to support a vise to a wooden scabbard for a ruler , all done with extreme skill. Nice job Jeremy.
@threeque5 жыл бұрын
Jeremy what a great watch. You make very entertaining videos. To see you progress through all your attempts was very inspirational. What a great piece you have made. All the thought gone into something seemingly so simple has made a great product. You are going places for sure.
@kevinthomson6324 Жыл бұрын
I totally agree with you on the 6” scale. Never leaves my pocket when I’m at work. Use it dozens of times every day.
@RileyKnifeandTool5 жыл бұрын
If you want to bend a tighter radius in titanium, just heat it with a torch first. You'll have to clean off the oxidation, but it works like a charm.
@iverson20955 жыл бұрын
Hey Jeremy, I love all the little technical finesse that goes in to this object. That's real beauty to me. Keep it up!
@threeque5 жыл бұрын
Absolutely!
@QuaabQueb5 жыл бұрын
after nearly dying of laughter just after 4:03, I had to pause and scroll down to the comments.
@joshstroud68234 жыл бұрын
I did the exact same thing.
@braeden900004 жыл бұрын
Same wtf
@oliverworks54695 жыл бұрын
Jer, you’re such a perfectionist, and it shows in the quality of your work and product. Awesome as always!
@DawnMontgomeryAuthor5 жыл бұрын
Please do make the PDF plans! Also, I really appreciate how you show all your prototypes AND how you recover from any mistakes you've made. Thank you for another great video!
@tinkermouse-scottrussell37385 жыл бұрын
Enjoyed this project, Jeremy enjoyed watching this all come together thanks for taking the time to share this with us. Play Safe From Elliot Lake Ontario Canada.
@joedance145 жыл бұрын
Very nice work. I gave up on carrying the six inch rule. My wife gave me a Lowe’s gift card, which is now carried in my wallet. It has a short ruler in inches on one edge. Good for measuring many small items at the hardware store. I have also been looking for belt hooks, and for guidance on how to make a case for a 12 inch Incra ruler. Really appreciate your insights and perseverance. Thank-you.
@garethwyatt6265 жыл бұрын
When I first found you I binged and watched everything in one go.. so I’ve been waiting and hoping you would add more soon. I really hope you can get to a point where you just make videos all day because your channel is absolutely perfect. Keep it up my man 🤙
@cranesgonewild5 жыл бұрын
I’m so glad to have you back. Please keep the videos coming.
@crystalsoulslayer5 жыл бұрын
I love things that are practical and pretty. What an awesome piece, and amazing to think how much development and iteration goes into something that seems so simple on its face.
@jazvecisko5 жыл бұрын
Uau Jeremy this is such a high quality video. The evolution of the design, framing of the shots, your lines, jokes and delivery, pleasant music at the end, everything. Fantastic work. You're a king.
@Jer_Schmidt5 жыл бұрын
Thank you!
@joeframer96425 жыл бұрын
Quality craftsmanship... Love the channel !
@kyvguinto5 жыл бұрын
This feels like a "please take my money" moment. But seriously I'd buy one of these in a heartbeat if you sold them. Convenient ways to keep rules, combination squares, calipers and marking tools at hand are in short supply and are game changers.
@stxrynn5 жыл бұрын
Very nicely done. Thanks for the troubleshooting info. I appreciate that.
@frthlooam5 жыл бұрын
Missed your content and your humor! Great video man, please keep them coming!
@Tugmun115 жыл бұрын
Great great video, the redo a classy move, the thought and detail, excellent, never a disappointment, Thanks Jer...
@richardcranium65545 жыл бұрын
Nice! I have my dads rule from the 50's, its 3/4" wide, use it almost daily.... on the work table. It never entered my tiny mind to build a sheath. Great idea, fantastic project. Thanks for your vids, you have wisdom (and patience;) way beyond your years.
@saleemalkinani34965 жыл бұрын
Thank you so much Jeremy for this video. It's really informative. You have just given us lot of experience from those mistakes that you have shown. The technique that you use and the details that you care about is just compelling. Good luck
@whoDatBeDare5 жыл бұрын
Love it! Design by practical use! Well done! Love the detailed instructions and reasonings.
@bushman41245 жыл бұрын
i hope again to see more regularly video's from you, always a joy to watch and too learn from you
@Sambarbadonat5 жыл бұрын
Thanks again for great content. I learn a lot when you include your mistakes and how you recover from them. The explanations you give for what you do are also really valuable.
@mrbenmall5 жыл бұрын
I was so excited to see you had posted a new video. What an excellent video! Thank you for posting.
@Jer_Schmidt5 жыл бұрын
Thank you!
@ronsmith95355 жыл бұрын
Again, very ingenious. You are a clever man with a real knack for teaching and a very cool sense of humor. Thank you for sharing both.
@brainfornothing5 жыл бұрын
Almost 20 minutes doing what supposed to be a simple project and, still, is worth it every minute; not to many people can accomplish that. Thanks for sharing !
@RCDinsmore5 жыл бұрын
I appreciate your honesty and willingness to show your mistakes. It not only prevents me from making that mistake, it gives me confidence in that if I do make a mistake, I'm not the only one!
@louisfkoorts55905 жыл бұрын
Wholesome and educating. A real "solutions person". You cause a smile, that go beyond the face. Good to see You, it's been a while. Thank you Jeremy.
@Jer_Schmidt5 жыл бұрын
Thanks!
@DoubleHaulCharters5 жыл бұрын
Cool project. Thanks for showing the development process.
@MrCheeto75 жыл бұрын
This is great! So useful. So well done. The curve, the cleanout hole... Fantstic details. The minutia matters! Thanks!
@lippen7775 жыл бұрын
Wohoo another video! Love what you do!
@grbroussard5 жыл бұрын
I accidentally came across your channel and think it’s awesome. I’m new at woodworking and your videos help a great deal.
@JosephusXIX3 жыл бұрын
Very cool. Nice job. Great craftsmanship.
@rex82555 жыл бұрын
I have a block of beeswax I picked up for waxing string I use for various things. I used it as a finish by heating the wood with a heat till it was hot enough to melt the wax, and then just rubbing it on the wood. It worked out very well!
@jordanbauman38285 жыл бұрын
Amazing video. I love your attention to details and being honest when things don't go right.
@suzisaintjames5 жыл бұрын
It's beautiful! Congrats on another fine build! Sending lots of love ❤ from sunny 🌅 Arizona 🌵
@ShadLindrud5 жыл бұрын
Awesome video and a great idea for something else to add to my already full pockets! I also want to thank you for including the mistakes and showing us the design iterations. It's so helpful for people to understand that these things (designs) rarely come out right the first time. The trials and errors and the learning from those are so helpful and most of the time (from other sources) we don't get to see that and miss out on that part of the process. A great lesson to anyone who aspires to design something.
@Jer_Schmidt5 жыл бұрын
Thank you! I’m glad you found it useful.
@Jer_Schmidt5 жыл бұрын
Thank you! I’m glad you found it useful.
@daviddickmeyer52315 жыл бұрын
Glad to see you back! And with a great idea too!
@clydedecker7655 жыл бұрын
Another clever design with a lot of thought put into it. Thanks again Jeremy.
@robjohnston52923 жыл бұрын
Even though they're few and far between, I really enjoy your productions and projects. Thanks for sharing.
@AquaPeet5 жыл бұрын
Yay! A JS vid! The craftsmanship shows off again... Love the dry humor. Great to see you, hope everything's well!
@Jer_Schmidt5 жыл бұрын
Thank you!
@stevelecain8863 жыл бұрын
we miss you Jeremy, hope you haven't given up on this your videos are fantastic and your work is second to none.
@harrydavis69035 жыл бұрын
Enjoyed the video, Jeremy. Very well done.
@keithviolette58705 жыл бұрын
Great video 👍 it's great that you include the mistakes and show all the prototypes - it teaches younger viewers that perfection takes time. Also, an EDC that I have used for 20+ years are precision tweezers called "Uncle Bill's Silver Grippers" they are good as is, but I sharpen the tips by using a small screw and nut to hold them closed while I grind them to a sharp point. Learned the hard way that metal splinters are tough to find and remove.
@stefcampagna23215 жыл бұрын
Jeremy, you are an artist !!!
@danielcrawford73155 жыл бұрын
Nice man just nice. Interesting to see your iterations and hear the thoughts pros n cons. Good on you sirSir! 😁 Blessings abundant sir, Crawford out 🧙♂️
@hikerbro38705 жыл бұрын
Props for the Chris Reeve folder. Back in the 80s I wanted one of his one piece hollow handled fixed blades more than I wanted Tawny Kitaen. That's a lot. Great project, sir!
@clipdump3 жыл бұрын
Was totally glued to this video man well done. Beautifully simple end product.
@asbjrnyoung-groener16465 жыл бұрын
Super fun to watch, I really like it. Good work.
@prototype3a5 жыл бұрын
Excellent work Jeremy!
@MarioMurat5 жыл бұрын
Good to see you back!
@howdoyoudoityourself5 жыл бұрын
nice to see such a nice video of you again thanks for it
@sapelesteve5 жыл бұрын
Very nicely done Jeremy! And as other have noted, I LMAO at the wood in the pants remark!!
@teamdrama62515 жыл бұрын
Love the project and also the food grade finish. Because I have actually used my 6 in ruler as a fork to eat ravioli's with it .late night at the shop you have to improvise. Lol keep up the good work glad to see you backv
@crossgrainwoodproductsltd92305 жыл бұрын
Hey Jeremy!! It's amazing that I clicked onto your video about the 6" steel rule holder. I have had mine for a few months which so far is the longest time before it got too bent to use. So I ordered two more, (I have a thing for any ruler type instruments- (I know, weird lol) and they came in yesterday. So now I'm going through my scrap bin and I'm going to make myself a sheath too out of purple heart. As always, great content.
@castledomeknives93955 жыл бұрын
Ya era tiempo Amigo....About time my Friend.... Keepem coming J
@sergeduval13915 жыл бұрын
you surprise me each time with your original ideas bravo
@spinaway3 жыл бұрын
Love your art Jeremy, greetings from the UK.
@jeromyashcraft45714 жыл бұрын
This is great. Think I will make one for my son, he just got hired as a machinist apprentice. Also, very much appreciate you showing the mistakes as well, so much more inspiring than thinking things always go perfectly for the “professionals.”
@FredMcIntyre5 жыл бұрын
Awesome work Jeremy! 😃👍🏻📏👖👊🏻
@aroldfut5 жыл бұрын
The mind of an Engineer never stops. Well done Jeremy!
@MaltandMake5 жыл бұрын
Wow! I'm so impressed by the iterations!
@watcherbd455 жыл бұрын
Jeremy, I want to tell you I really enjoy watching your vids. You are such a smart young man and so humble when you mess up. You are a great teacher of many things on the projects you do so please keep your videos coming. I am sure many viewers feel the same way I do. I always say there are smart people and then there are really smart people, well you are the really smart people my friend so just want to let you know I really enjoy your vids.
@Jer_Schmidt5 жыл бұрын
Thank you so much! That means a lot.
@Nightman21525 жыл бұрын
Cool man! I love the attention to detail! I have a klein technician pouch that I use as a back pocket protector. I keep an olfa knife, a 6" adjustable wrench, knipex pliers, a flashlight, pens, pencils, sharpies, and a 6" combination square. I started wearing it at work then I started reaching for my wrench all the time so now I just leave it on all the time. I went to an estate sale today and my wife told me to leave the pouch so I did. At the estate sale I found a sweet vise bolted to a table. I couldn't unbolt it because I didn't have my pocket tools. The moral of this story is CARRY TOOLS EVERYWHERE ALL THE TIME! also I found a wrench and got the vise it's a 3" Hercules made in Canada!
@DesignPrototypeTest3 жыл бұрын
Jeremy, we miss you. I hope you are well. Thank you for the videos!
@jimronchetto85925 жыл бұрын
Great and amazing video as always, Jeremy!
@ozcanonal5 жыл бұрын
Excellent piece of work
@turquoiseelk66483 жыл бұрын
Anyone else praying on everything this man will release another video? I will stay subscribed for ever.
@ragincanadiangmail5 жыл бұрын
Great job Jeremy. I keep one of those in my front shirt pocket on a pen type clip but it's constantly snagging and getting pulled out of my pocket. I like this a lot and am definitely going to have a go at making my own. Super impressed.
@mihailemnaru89194 жыл бұрын
I love your videos, i learned many new things and they inspired me to repair and build. Please do more youtube videos.
@DIYTyler5 жыл бұрын
Nice. Cracked me up! Should made a CAD model so you/we can 3d print....I would try that put it in my shop tool belt for sure.
@Jer_Schmidt5 жыл бұрын
Thanks! Ok, you’re not the first to suggest 3D printing, so I’m gonna try to make a CAD model. I don’t have a 3D printer, but I’m assuming you just need a solid 3D component in DXF or STL for your slicing program to convert to G-code?
@suchti76543 жыл бұрын
@@Jer_Schmidt A little late but yeah, a solid model in STL would be perfect
@Jer_Schmidt3 жыл бұрын
suchti7654 I have one, and I have 3D printed it successfully. Shoot me an email if you want the STL jerswoodshop@gmail.com
@mikymax77983 жыл бұрын
@@Jer_Schmidt May i also Email you if i want a new Video? 🤔😊
@Jer_Schmidt3 жыл бұрын
miky max You can try, but it probably won’t help. I might make a new video soon-ish, but no promises.
@firstgan1145 жыл бұрын
Great job. Very educational and hilarious as well.
@arj446_5 жыл бұрын
Jeremy, dude, you made my night ! A new upload in such a long time, and that (un)intentionnal joke about the 6 in of wood in your pocket. Still laughing.
@BrilliantDesignOnline2 жыл бұрын
GREAT video; thanks for including the mistakes, because that is very helpful as well.
@hullinstruments3 жыл бұрын
If you ever redo this one day, I’ve got a lot of incredible cut off‘s from guitar making, everything from Brazilian Rosewood, striped black/white Ebony, purple heart, pink ivory, literally any exotic wood you could ever think of. Hundreds if not thousands of pounds of the stuff. Hell I love collecting exotic and semi precious materials, I have a large collection of pre-ban ivory, walrus ivy, walrus penis bone ivory, mastodon tooth and ivory, all types of coral, mother of pearls and abalones, tons of shit like that. When I was a kid I was around a lot of knife making and exotic material because my dad was the main supplier of synthetic mother of pearl, ivory, and stabilize wood to all of the major knife manufacturers, gun grip manufacturers, and many other industries. companies like Smith and Wesson, Frost cutlery, case XX, Kershaw, Buck, and over 100 of the most well renowned professional knife makers… Most of which were the old-timers who pioneered High end art Knives and custom knife making. All of the guys who were at the first 10 or 20 blade shows and who became famous and were backordered five years with pre-orders for $3000 bowie knives and such 😂 it was so much fun being around that stuff. Took him years and he spent his life savings developing the stuff… And He shipped it out in huge truckloads. He was one of the first folks to pioneer wood stabilizing back in the late 90s. His biggest clients were always the huge knife companies that would buy it in bulk and ship the material to China or wherever their knives were made to have it put on. But a close second is the big Knife Supply companies. Many of which are still around today. Like Jantz, Texas Knife Supply, USA knife maker, and so many others it was a lot of fun to grow up around that stuff… And I’ve had a love and appreciation for exotic materials to this day and I have gathered a really great collection. I also do a lot of wood stabilizing with resins in a vacuum chamber system. So I could always stabilize a few small pieces for you so that it’s completely impervious to moisture and becomes almost as tough as micarta or G10. Another cool idea would be to make it out of Vintage Micarta like some of the beautiful original stuff. Some of the jade or aged ivory colored linen micarta is absolutely stunning and looks like a damn gemstone when contoured and polished. Vintage looking and properly colored Micarta is a really timeless and beautiful material, but exceptionally hard to find the original antique stuff. I happen to have a lot of it mostly salvage from antique elevator electrical panels and other antique electrical control equipment. Because that’s what it was originally made for. Isolation in electrical equipment. The stuff is going to skyrocket in price, just like Bakelite. If you want to have your mind blown look up completed eBay listings for Bakelite raw material and blanks. Rods and stuff like that. Damn I needed a Bakelite blank to restore a custom pen from the 1950s… And just for a small pen sized blank of honey colored Bakelite people are fighting over them on eBay for damn near $500. It’s just a plastic for Pete’s sake! But now it’s considered a semi precious material, and vintage micatra is soon to follow. I’ve seen old Bakelite bowling balls and alarm clocks sell on eBay for well over $1000. To be cut down and used as raw material in making new “throwback“ products like jewelry, fountain pens, and other beautiful timeless designs So just shoot me an email or message if you ever decide to remake it or want some material to play with.
@BruceAUlrich5 жыл бұрын
You have done a TON of experimentation on something I didn't even know I needed...until now. ;)
@jerrybobteasdale5 жыл бұрын
When in the shop, I frequently carry a nylon sleeve from a mini-Mag-lite. The sleeve holds a 4" Empire mini sliding caliper measure, and a thin, 6" , stainless ruler with sliding pocket clip. I carry the nylon sleeve in the bib pocket of overalls, but it works in a front jeans pocket, too.
@TheMarcball5 жыл бұрын
Very nice idea, very nice video. Thanks and keep on trucking
@stephenharvey41385 жыл бұрын
The sheath is a good idea as is the suggestion for a slot for the tweezers. I'm suggesting using a neodinium magnet to hold the rule in place instead of bending the wood. Magnets are also useful to determine ferrous and martinsitic metals from others.
@Jer_Schmidt5 жыл бұрын
Thanks! I don’t want a magnet in my pocket collecting metal shavings, nor do I want to magnetize my rule, so I’ll stick with the curved slot.
@miraclo35 жыл бұрын
i also carry one and i thought i was the only one. i had made a simple leather sheath and it is super thin and doesn't poke or scratch things. also never had any real problems with the ruler bending.
@Jer_Schmidt5 жыл бұрын
Cool! My brother has been wanting a leather one, I’d be interested in seeing how you constructed yours. Jerswoodshop@gmail.com if you care to share a pic, if not that’s totally fine. P.S. nice profile pic ;-)
@mcwbyu825 жыл бұрын
so good to see you back . . .PDF plan sure, but I think you should be selling these!
@davomontgomeryda3rd5 жыл бұрын
Awesome! Your attention to detail is superb & you’re ability to design and combined esthetically awesome form with super functionality is honed to a razor’s edge! I would have never considered the brilliant simplicity of a using subtle S curve as the holding mechanism... I would have just used a magnet.
@dayslife3 жыл бұрын
beautiful piece of art !
@travers1145 жыл бұрын
Thanks for sharing the failures too, they're often more of a learning opportunity.
@Guishan_Lingyou5 жыл бұрын
Great to see the process and mistakes and mixes. More entertaining and I think more educational as well.
@Jer_Schmidt5 жыл бұрын
Thanks. I could have made the video a lot shorter by leaving that out, so I’m hoping it’s worth it to you.
@harrymoyes50695 жыл бұрын
@@Jer_Schmidt Very much so.
@skipgoryews13565 жыл бұрын
Good job ! you have a great mind for technical ideas ,keep it up ! best of luck.
@dmmflys3 жыл бұрын
I really miss watching your videos. You have great content. Please post again soon!