MFJJ gives us another one of his bow builds this one being the Reckoning Tac.
Пікірлер: 105
@Bowhunter66 Жыл бұрын
Learning so much watching you set up a bow. You make it look so simple and straight forward. Can't wait for the follow up. Thanks for taking the time to put these videos together!!
@michaelpoplawski3246 Жыл бұрын
I don't know if you wore the Hoyt shirt for effect, but it made me chuckle to see the "Get serious, get Hoyt" tag line while you were setting up your Bowtech bow🤣Great content, love the features that Bowtech put into the Reckoning.
@MostlyPeacefulCombatVet Жыл бұрын
I f’n love these videos! I wish I had a pro shop around here that could help get a bow setup PROPERLY, but I don’t. So these definitely help a guy like me know what to look for when dialing in right out of the gate.
@lindesylittlechief9056 Жыл бұрын
Your videos are fire 🔥 by the end of them I not even pooping I just sitting on the toilet keep them coming
@houghtonic1975 Жыл бұрын
Thank you for the detailed explanation of how you set the cam lean to start your tune. Great video
@perryknetter8577 Жыл бұрын
Thank you Josh for the great informational video Always learn something and great to see someone sharing all this knowledge God's Blessings on all your adventures
@Jalexander61 Жыл бұрын
MFJJ, this is a general thanks! Im a new shooter and following your channel ive learned so much. My shooting is greatly improving and my bow repair & setup skills as welll. Have a great weekend! From NY!
@johnmclaren1666 Жыл бұрын
It's cool how you just grab top dollar accessories off the shelf and don't even blink🤯 Great looking bow! Looking forward to your next video.
@FIVE6-qk6pc Жыл бұрын
He's making so much money just from online sales alone
@joshmorris8510 Жыл бұрын
Great info on setting up a bow! Have learned a lot watching your videos.
@Sticksniper0625 Жыл бұрын
I am trying to learn all I can on how to work and set up my own bows . When you started the first thing you did was set your nocking points with a square, how did you know exactly where to put them without your rest being on the bow ? Did you just line up with the burger holes on the bow? I really appreciate all the content on the how to’s
@iamthepawpaw Жыл бұрын
You know Bowtech and GAS are cringing when MFJJ says, “ Just change the factory settings.” Love the content brother.
@joshuaborowy2078 Жыл бұрын
Does it come with them from the factory or something
@thenameiwantedwastaken Жыл бұрын
Imagine how Hamskey felt when he broke the top plate of his rest
@iamthepawpaw Жыл бұрын
@@thenameiwantedwastaken 😂
@brianklebowski243 Жыл бұрын
@joshuaborowy2078 gas strings are going to be an added cost. Not a bowtech factor string
@darrenlowry7477 Жыл бұрын
Watching a guru like MFJJ set up bows is awesome.
@andreschafer4675 Жыл бұрын
Awesome video, I'm just learning to tune my own bows and learned a few new tricks here! I'll be looking for you in Big Sky to say "Hi"!
@royhoglund1322 Жыл бұрын
Slow is smooth, smooth is fast. Ha, you looked a little rushed! You definitely make setting up a bow look easy! Can't wait to see the rest.
@ghaugsness Жыл бұрын
Definitely like getting a different perspective on how you go about setting up bows!
@belinfamily2762 Жыл бұрын
Thanks a bunch for all the info MFJJ!!!
@williamhart8087 Жыл бұрын
Great content and information as usual. Look forward to seeing it shoot.
@wx7yp7 Жыл бұрын
More in close camera of bow perhaps second or third fixed for details .
@clintmurray3795 Жыл бұрын
Love these bow builds!
@TheDanielBrown Жыл бұрын
It’s good to know even the best has issues putting things together I’m glad it’s not just me😂
@adamhalcom1608 Жыл бұрын
Always great to see your vids you have taught me a lot
@jasoncharles9748 Жыл бұрын
Awesome content! Keep them coming!
@UpNorsk Жыл бұрын
I need to see a video on wheeling. My brain cant make sense of putting the laser at the middle of the cam. If the laser is 1/8" off the bottom cam wouldnt you want it an 1/8" off the top so its running square and parallel to each other?
@CamArmstrong-sl5vn Жыл бұрын
Same result. He just uses center of cam as reference.
@callummethley5082 Жыл бұрын
I was thinking the same...the offset of the laser has to be zero
@kenlafaive9336 Жыл бұрын
Always enjoy all your videos and learn so much.. Just wondering if you know of a way to sharpen the innerloc or muzzy replacement broadhead blades? I have been looking for a long time with no luck finding a system that will sharpen them. Your help would be appreciated.
@BucksBeesS.C. Жыл бұрын
Looking for the same just to fine tune the edge the right way
@jasondukette4155 Жыл бұрын
Learn a lot watching mfjj keep up the videos hope to see how you shot at Redding archery shoot
@tylerlee53498 ай бұрын
Thank you for the info. I’m having the hardest time getting my bottom cam to line up. The top of the bottom cam is leaning WAY away from the riser (top left). I swapped the shims to have the cam move to the right. I’m now questioning if I moved the right direction as the lean seems the same or maybe even worse. Let me know something before I mess something up please. Thank you!
@chrisennis19159 ай бұрын
Totally getting one and using it for hunting and 3d and tac
@bradheath2592 Жыл бұрын
Enjoying the content , Keep it up !
@josephstanczak43407 ай бұрын
Camera dude needs to discover the zoom button for this video.
@colerichardson74353 ай бұрын
Badass bow
@jimmyno133710 ай бұрын
So 2 part question. 1 did you go with the med cam because of speed efficiency? 2 I currently shoot a PSE Shootdown Pro at 30.5 with the letoff at 85%. Would that be too much to lengthen the string?
@archerash6695 Жыл бұрын
My #1 teacher.
@hershelr.sullivaniii71395 ай бұрын
I looked through your videos, and I never saw a follow up to this one. Did I miss something?
@callummethley5082 Жыл бұрын
Love this full build and setup!!! Loads of good stuff.... Question - what is the rail and threaded rod on your DIY draw draw board called (the u--shaped channel)???
@tysobol Жыл бұрын
Hope to see you guys there! I'm shooting Sunday
@wesmurer6884 Жыл бұрын
Why did you settle on 60lbs not 70lbs for the Reckoning.
@woodduck1414 Жыл бұрын
Josh have you ever used a prusik knot instead of the football style clamp for the rest chord? Pros cons to both?
@davidpitts8921 Жыл бұрын
Why don't you use a prusik knot instead of the clamp on the rest cord?
@josephdipietro8367 Жыл бұрын
I didn't think you would of been a flashy color guy. Doesn't matter for foam thou.
@NeilEubank Жыл бұрын
I would like to see a product review on the new g5 mark arrows.
@xcr-fg7nd Жыл бұрын
Pretty impressed with Dans 48 yrd turkey shot. What does your scope image look like? What made you choose that size and configuration. Thanks.
@jeff_8789 Жыл бұрын
Already ordered now gotta sell my new uv button don't really care for it anyway been using my carter til I find something else but this is gonna be awesome
@grant6608 Жыл бұрын
Please do a video on building your own sight tapes
@Silbar89 Жыл бұрын
Wish we got a tight shot on the limb driven rest cable position. Maybe drop it as a short?
@clintonmoore1070 Жыл бұрын
The ends on bowtech limbs with the deadlock cams taper in, then flare out where the cam brackets bolt onto the limb. This makes a slight hourglass shape that he tied the cord into the middle of.
@crustymarine86 Жыл бұрын
Make a video on how you made the drawboard
@madman432000 Жыл бұрын
When shortening the cables and lengthen the string do the cam timing marks, if they are present, stay the same as factory or will they be in a different location? I read a discussion about colored string loop material of specific colors that will not hold well on the serving. Any thoughts on that? Black held better and pink was not holding well at all.
@brianklebowski243 Жыл бұрын
Timing is rarely in sync even from the factory. So much changes, draw length, pulling points poundage, d loop length and location onthe string. Timing always has to be checked and verified on any change you make.
@bertcard2307 Жыл бұрын
The Green Machine!!!!!
@thorwaldjohanson2526 Жыл бұрын
About to get my Reckoning Gen2 36 set up as well, so THANK YOU for this video! Question: What / how much of a difference do these aftermarket cables and string make? Are the Bowtech ones bad or lacking in some regard?
@goldtip34 Жыл бұрын
Paper tune after putting the stabilizers on and see if there is a difference. Nice video and nice bow
@bmook019 Жыл бұрын
Stabilizers can make a huge difference. Adding a front bar can change your left to right tune.
@goldtip34 Жыл бұрын
@@bmook019 would you tune with them on or off
@bmook019 Жыл бұрын
@@goldtip34 I would tune it how you're going to shoot it
@kentrawlins7031 Жыл бұрын
Nice job thank you
@djlaxton5687 Жыл бұрын
always so much advice! idk if you have addressed it in a video before, but is there too fast of a speed for mechanicals? my bow is tuned up pretty well and fieldtips group well. im shooting 305fps right now at 30in draw
@ThomasAnnaAdventures Жыл бұрын
If you just added twists to the cables without making an adjustment to the string would your draw still have changed, or do you have to manipulate both the cables and string? My partner has a short draw and her current bow max is 56 lbs, the bow she had prior was just over 60. We wish we could get more pounds out of the new bow. If there was twists added to the cables the poundage would go up but would we also have to manipulate the string to prevent the draw length from changing?
@johnmclaren1666 Жыл бұрын
Not sure of your bow brand. If I put one full twist into both cables I gained just about 1.5lbs. You should have to add one twist to the string for each twist in the cables. Just do one twist at a time and see how the bow reacts. These results are from a V3X-29
@liamboyle9199 Жыл бұрын
Hold up, you put the laser on the side of the track and then induced lean? I would have thought default is to start with both running in a straight line?
@danielleuteplace535 Жыл бұрын
Would you throw in a video on shooting in your rail like you mentioned at the end?
@wadephillips3882 Жыл бұрын
How about directions on how you built your draw board that would be cool
@adamvisser9815 Жыл бұрын
When you were paper tuning the bow do you recommend doing close like you did, or should it be done with the paper at 20 yards?
@ullikuschal8000 Жыл бұрын
Hey man do you have a linke to the "archer marks sight tape program"
@georgetorres6245 Жыл бұрын
How long does it take too do a bow build with out rushing 45 min 1hr
@myronriggs9613 Жыл бұрын
I want that bow!
@bbbbbbb2357 Жыл бұрын
Slooowwwwwwwwww down buddy.
@vancejohnson1778 Жыл бұрын
Hell ya mfjj! Hopefully that set up works great for u!
@mojoe8005 Жыл бұрын
Can u make a vid on shooting at a level line for the rail for 1st axis
@blp169810 ай бұрын
I need this bow
@huntsimple9527 Жыл бұрын
It was interesting that you did not measure A to A and brace after replacing the strings. I always like to see where I am at with regard to factory spec after replacing strings. My guess is you did not measure since you were purposely taking it out of spec to add some draw length? Hard to argue with the Deadlock Cam system on Bowtech, when that patent expires I am sure others will implement that ASAP. Thank you!
@the_sharp_carpenter Жыл бұрын
Yeah, gaining that ½ draw length would make factory specs out a bit. Doing what he did changed AtoA, brace, increased draw weight, and changed holding weight percentage at the same cam setting.
@huntsimple9527 Жыл бұрын
@@the_sharp_carpenter For sure. All of that is OK, I was just expecting MFJJ to show us that and talk a bit more about it. I wonder if Bowtech would warranty that bow to an individual like you or me if we took it out of spec? I bet not.
@the_sharp_carpenter Жыл бұрын
@@huntsimple9527 twisting cables and strings has been common for tuning since compound bows have been around. Some people intentionally take the cams out of time (top or bottom hitting ahead of the other) to gain small amounts of forgiveness for target setups. This just changes the timing and rollover point to gain draw length, shouldn't be an issue. I'd actually be interested to see how much length could be gained just maxing out the timelock adjustment.
@ghaugsness Жыл бұрын
Which laser is Josh using?
@brianklebowski243 Жыл бұрын
Spot hogg he sales them on website
@georgetorres6245 Жыл бұрын
What’s the rust Mann you have time limit on this bow build
@mojoe8005 Жыл бұрын
What laser do u use?
@graemehorn7523 Жыл бұрын
nice
@ButcherBBQ Жыл бұрын
What laser was you using for cam angles?
@brianklebowski243 Жыл бұрын
Spot hogg he sales them on his website
@archerash6695 Жыл бұрын
Im not sure why Hamskea even sells the football rest cord dodad. The ez glide is the best and should be included with every rest they sell. I bought a bunch for the shop cause I don't trust the football clamp
@bmook019 Жыл бұрын
The redding bow would work welk wouldn't it?
@BlueWidow2010 Жыл бұрын
Paige says that she makes her target bows aim the best that she can. Do you spend time doing similar stuff to your target bows to make them aim the best you can? If so would pass some of that goodness to us great follower's?
@shawnwoodhead9895 Жыл бұрын
Need Tim to be your camera man.
@Koudey7 ай бұрын
What about Slop Hogg Swap?
@davidgreer9567 Жыл бұрын
You know so much, and I appreciate your videos, but the camera guy never catches exactly what you're doing. Barely showed Dloop. It would be nice if it was up and close so we can learn how to do things.
@justingarant9367 Жыл бұрын
What did the one lighter say to the other? I feel lighter today 🍩
@qvfireman158 Жыл бұрын
Thanks for doing these videos. Do you have a lighter?😂
@RugerNuger Жыл бұрын
Im really just not a fan of them new lca bow vises seems like a lot lf wobble amd play in them i like my opm morco adjust just seems like a much mkre stable and accurate system 🤷 other than that mr jj keep the content coming (maybe clean up that work area tho my ocd for mess and organizing was going insane 😅)
@ericolds1410 Жыл бұрын
What stabs are you gonna run?
@stanlong-rangepensionerman3363 Жыл бұрын
🇦🇺🇦🇺👍👍
@ronstein7369 Жыл бұрын
Great info. Thank you. BUT ... your Camera Man needs to 1) Focus the camera, and 2) focus on what your doing. ie) show the bow rest, tying your intial peep loop. NOT you.
@JoshandTim Жыл бұрын
BRo! What's it fixing to be like when I have to put a whooping on you with the same bow?! - tc
@Kodyanderson402 Жыл бұрын
A little girly bow color but i guess when your the best shooter of the group you can do what you want haha just playin but loving the tech stuff!!!!
@waynestevenson9613 Жыл бұрын
MFJJ - confusing! please explain in detail cam alignment. Or do an in-depth explanation of laser alignment. kzfaq.info/get/bejne/qJhnfLaY3tiRZ6M.html in that vid you aligned them at brace. And in this vid your aligning them at full draw. One way or the other it throws the cams off. Which way is correct?!?! It can’t be both!