(Just want to inform you about the Lifetime Oneway clutch, it only lasted me two rides and failed. It looks well built but not worth your money.) Removing oneway clutch/bearing from a Polaris Predator 500 03-07, Outlaw 500 06-07
Пікірлер: 91
@71985jay4 жыл бұрын
Great video. I was thinking of changing mine out soon. And was hesitant of doing it until I saw ur video. Great job. Thank you. Very well done. And easy to follow along
@michaelmullins647911 ай бұрын
Thanks bro I needed this video so bad been looking for hours lol great video very informative
@poorwhiteboy65213 жыл бұрын
Thanks that helps to watch how everything comes apart
@poorwhiteboy65213 жыл бұрын
4 bolts came out. And broke off the other 4 where loose. And bearing is bad of mine. Easy fix 👍
@bradleymadosh911Ай бұрын
I have a 07 im working on i changed the clutch plates and springs and friction plates i dont see where the transmission oil goes in or does it come from the motor oil? Please let me know thank you
@nfdbb69063 жыл бұрын
Would this be my issue it spins the motor but wont start it grinds and sounds like nails on chalk board we spun the engine over with a wrench and was all smooth and quite
@ryanscheck88264 жыл бұрын
Life saver man, just got a predator and it’s doing the same thing.
@poorwhiteboy65213 жыл бұрын
What does it do when it's bad ?
@joshpersinger36593 жыл бұрын
@@poorwhiteboy6521 when u go to start it you will here the starter turning but nothing else just a high pitched spinning sound it might try to turn over but if the one way clutch is really bad it wont catch and try to start at all.
@markimlouifaite45365 жыл бұрын
can you post a link of the gear. it looks really well built.
@user-og8kv8vu5f11 ай бұрын
do you have any video on replacing starter? I am a novice needing all the help i can get. great video
@eduardofeliciano99903 жыл бұрын
Hi I like your videos I learn a lot from them... I have a question is that in side spouses to be wet with oil .. cause mine polaris predator 500 is all wet all over
@mg0163 жыл бұрын
Yes that is normal, oil should be in there.
@eduardofeliciano99903 жыл бұрын
Thank you so much ..it was helpful
@epardoski4 жыл бұрын
So mine wont turn over and that gear spins freely, should this fix it? Could you tell us what the part number is for the replacement you used.. thanks
@mg0164 жыл бұрын
This one worked better for me.www.ebay.com/itm/One-Way-Starter-Clutch-Bearing-for-Polaris-Predator-500-03-07-Outlaw-500-06-07/254140539642?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
@KillerGaming-rl5on3 жыл бұрын
Currently trying to replace one but the piece I took the bolts out of are stuck together. What can I do with common household tools to get them apart? Tried a rubber mallet.
@mg0163 жыл бұрын
Try to pry them apart by using a pry bar or screwdriver but also make sure not to bang on the flywheel, the magnets can get damaged.
@ramsesrodriguez22984 жыл бұрын
Would this be the issue if my quad acts like it just turns over but not compressing the cylinder?
@mg0164 жыл бұрын
Yes.
@redbeardsgarageandvlogs40584 жыл бұрын
does the gear all the way in the back spin freely once everything is tigh or is it tight as well?
@mg0164 жыл бұрын
No.
@jeremybolles9511 Жыл бұрын
Where is the life time warranty? Mine lasted about two months and know doesn’t work!!
@Grimes.103 жыл бұрын
Mine came with an arrow on it pointing towards the right, does it matter which way the one way bearing goes on? I got the one you put the link in a comment.
@mg0163 жыл бұрын
Yes it does matter which way the oneway is put on.
@poorwhiteboy65213 жыл бұрын
I have a predator 500 and sometimes the starter just click click clicks and then sometimes it'll work and sometimes when I turn it over by hand it'll freeze up another times it'll move Free is that possible my problem
@mg0163 жыл бұрын
It could be but not 100% sure. It could also be your starter is going out. But if it was my bike I would remove flywheel cover and see what’s going on.
@ceasaraepoling59102 жыл бұрын
My problem is the gear in the back of the one way bearing spins freely when I hit the starter button. Do you know if that is because of the one way bearing?
@mg0162 жыл бұрын
Yes !!!
@ceasaraepoling59102 жыл бұрын
@@mg016 That fixed it. Thank you brother
@mg0162 жыл бұрын
@@ceasaraepoling5910 Awesome!!!!👍🏼
@jamescamfield48282 жыл бұрын
Having problems starting with a predator 500 I've just got. Sometimes fine. Sometimes nothing. Would u start with this or starter motor please
@mg0162 жыл бұрын
You can tell by sound if the oneway clutch is bad. It sounds like a fast spin, or fast spin with some grinding noise. Also a bad oneway clutch can work and not work (grab). Oneway clutch spins oneway and when it fails, going bad, it will spin both ways. I would check the easiest part to get to first.
@cliffbrowning24787 ай бұрын
Have you ever seen one bust a case because my case is busted right by the starter like right on the backside of the stater cover?
@dwbrothers9987 Жыл бұрын
Do you know if you have to Replace the gear? Or could you reuse the one that was in it?
@dwbrothers9987 Жыл бұрын
I’m just trying to ball in a budget LOL
@mg016 Жыл бұрын
The gear can be reuses unless teeth are broken or gear is bent from removing off flywheel.
@jonathangonzalez50143 жыл бұрын
Mine had black oil , are you supposed to ad some gear oil ? Or does it use the engine oil
@mg0163 жыл бұрын
Motor (engine) oil runs through that area, no gear oil.
do you still have the link to the starter clutch to purchase it, having the same problem
@mg0162 жыл бұрын
www.ebay.com/itm/321779687056
@mg0162 жыл бұрын
But you may get away just buying this only. kzfaq.info?event=comments&redir_token=QUFFLUhqa2Vnd1dJckV6cTNja3JaYVdkYTN2QTNEWWNjZ3xBQ3Jtc0treTc5NUJua055emp5N245c09kZGtlcFNUVFBhWGpwU19tcWVKTUZiVUJ1RTRhS0Zqdlhtdzg0eWR3Zzd3ZFFEWHVfYlc2eWFzTk9zUmFYTlcyLVB5Uy1qdDE5ZFAwd0VHOWlpc3RhRDZ1eFA3NjVCbw&q=https%3A%2F%2Fwww.ebay.com%2Fitm%2FOne-Way-Starter-Clutch-Bearing-for-Polaris-Predator-500-03-07-Outlaw-500-06-07%2F254140539642%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649&stzid=UgwohuRFCK5n-VLy5oJ4AaABAg.9ArmFOTz3oA9ArxIUbTi3m
@armandolocs80942 жыл бұрын
thanks man had bought one before not to long ago and the wire that holds the small bearing became lose and it’s causing it to not run again
@luigimorelli69554 жыл бұрын
hi can you tell me where did you get the kit with the reinforced freewheel?
@@mg016 THANK YOU so much bro .... you solved or broke again?
@mg0164 жыл бұрын
@@luigimorelli6955 To solve this issue the Predator needs to use the oem(original) CDI or aftermarket CDI's Vortek or Dyno. Other aftermarket CDI will cause motor to kickback when starting motor and damage oneway clutch & sometimes woodruff key. I currently have a Procom CDI and sometimes it will kickback. I also know my motor very well and know when to give it gas(throttle) so it won't kickback when trying to start bike.
@luigimorelli69554 жыл бұрын
I bought the original and after a week it broke again, now I buy what you put in the video .... I hope to solve
You should never use an air impact to put that nut back on your flywheel you will strip it or cause it to be weaker by tightening it down with excessive force it's best to use a ratchet and a pair of channel locks or crescent wrench to hold the washer trust me we have sheared many bolts off and had to drill them out
@mg0162 жыл бұрын
The impact I own does not have abundance of torque. I've used my impact and never sheared any bolts when tightening the flywheel nut on all the equipment (atv/dirt bikes) I worked on. Thanks.
@FTN.Justin3 жыл бұрын
Can this cause metal shavings in the side case
@mg0163 жыл бұрын
yes it can.
@FTN.Justin3 жыл бұрын
@@mg016 send me you number real quick
@FTN.Justin3 жыл бұрын
@@mg016 finna show you
@mg0163 жыл бұрын
@@FTN.Justin call me at this number 559-325-5281 no text
@FTN.Justin3 жыл бұрын
@@mg016 finna text you a picture of what it look like
@joshuaspaulding54722 жыл бұрын
How do u know the bearing Is bad doesn't look bad
@mg0162 жыл бұрын
If the bearing is bad it will move spin both direction.
@KillerGaming-rl5on3 жыл бұрын
I can’t get it to go back on right where you cut the video
@mg0163 жыл бұрын
Are you talking about the flywheel?
@pastardicus3 жыл бұрын
How much psi is your compressor?
@mg0163 жыл бұрын
100psi
@pastardicus3 жыл бұрын
@@mg016 , how much torque do i need in my air wrench?
@mg0163 жыл бұрын
@@pastardicus Fly wheel bolt torque is 111-125lbs, I'm not sure what my air gun is torqued to but I would recommended getting a torque wrench.
@biffed6927 Жыл бұрын
What's that belt thing called
@mg016 Жыл бұрын
Rubber strap wrench. I bought mine from Harbor Freight.
@biffed6927 Жыл бұрын
@@mg016 thansk
@mg0165 жыл бұрын
Sold by enginesourcing ( 18225 )+ Show additional actionsDelivered Life-Time-Warranty Starter Clutch NRB Polaris Predator 500 03~07 Outlaw 06~07Item price$139.99Quantity1Item numberShipping serviceExpedited Shipping
@linofierro13 жыл бұрын
Didn't explain why you needed to replace it and didn't started up for the viewers
@mg0163 жыл бұрын
The reason I replace it because the oneway clutch failed. When a oneway clutch fails it will spin both directions instead of oneway. The major reason for this is “kick back on motor when staring” when OEM CDI is replaced by aftermarket CDI other than a Vortex & Dynatek. My apologies for not starting the quad. Oneway clutch still running strong.