Good video. I am starting to look for a side by side. This was really helpful

Pro r, no competition.

Not even a question. Pro R all day long !!!!

Great vid, Dave! (And no background music is much appreciated!) Unless I missed it, no one in the comments section has yet mentioned the elephant in the room.....suspension geometry. Any sxs with rear radius rods will cause the rear tires to get closer to and farther from each other (known as track width scrub) as the rear wheels go up and down. At high speed in the rough stuff, that can cause the rear of the car to be very squirrelly. The Speed car's rear suspension geometry with beefy trailing arms and no radius rods results in essentially zero track width scrub. That translates to a smoother, more controlled ride especially at high speed in the rough stuff. Also, the inner pivot points on the Speed car's trailing arms are mounted lower than the outer pivot points. That causes the rear of the Speed car to hunker down when a lateral load is applied (eg, when turning the car) rather than experiencing the pole vaulting effect that happens with cars with rear radius rods which leads to a propensity for the car to roll. So the Speed car is safer because it is much less likely to roll as compared to other suspension geometry designs.

You forget to mention Speed sounds like a angry weedwacker ...

Better be careful about showing speeds against the compation, Robby be over at your house with a weedeater some cool whip and a live chicken to punnish you 😂!

Thank you for the video.

What's stronger. The pro R spliced tube or the Speed's bolted together tube right next to the b pillar?

Where is all those Speed turbo addons? Right now, Pro R with a turbo kicks the shit out of all sxs on the market.

Are you still having to spark the speed with a wrench to turn it on?

How much did you pay for the speed El jefe and the Polaris ? Thanks for the comparison.

How many axles have you went through at the dunes I know that’s a problem

Both are stock?

Sucks about the rear seats! Have you asked speed why the rears are not carbon?

You keep talking about seeing the "bead" of the weld.... While ill admit that the speed welds look much cleaner, WAY less undercut and much more uniformed and consistent weld; your use of the word "bead" is annoying af lol. What you are referring to is called the "dime stack" and makes ZEROOOO difference on the integrity of the weld. RZR does what is called "stringer welds" which is just straight passes. Speed does a "mig-like-tig weld" which causes that rippled look, which so many people ignorantly think that means its a stronger weld. Its not... In fact if you ask most any shipyard/structural welder they will tell you a stringer weld is the stronger weld. Now years of research now have shown us that a "mig-like-tig" method CAN be just as strong if done right. But neither is better then the other in terms of integrity. Let me finish though with saying that in THIS instance, the speeds welds look SIGNIFICANTLY stronger and had much better penetration, NOT because of their puddle manipulation method, but instead because of the amount of heat, wire speed, and the rate at which they moved their squirt gun. Judging by their bead width id be willing to bet that the speeds tubing wall thickness is a whole lot thicker then Rzr's.

Haven’t you had a ton of axles break on your speed?

Is it true your engine blew and caught the car on fire and your speed fire extinguisher didn’t work?

Price difference ?

Pro R reminds me of a Bulldog, It has no ass!

Pro R is the king with a turbo it kicks the shit out of anything available right now 2023-2024

Same HP claims with speed. Does it go in the dunes as well as pror

Not biased at all. 😂

That's isn't a b pillar, it's a doubled up a pillar. The b pillar is in the middle.

This comparison doesn't sound a bit bias. Lol 😅

Can I get a speed UTV serviced at my local powersports dealer?

Pro r has navigation, electronic suspension, engine modes, bullet proof inline4 motor that doesn't sound like a lawnmower like the speed and the pro r has endless amounts of aftermarket accessories for it so your ride doesn't look like everyone else's because everytime I see a speed they all look the same and I have yet to see a rzr look the same unless it's a Troy Lee designs people aren't really doing much to those and also the speed car is owned, built and tested in commie countries like China and veitnam. I'll take my navigation and electronic suspension alday and like I said the speed sounds like a lawnmower. I like how you down played the ride command and talked up the speed cluster lol does robby make you drink Kool aid before buying a speed!? Btw the speed looks like a el Camino 😂

Miss matched bolts who knows how strong that metal is?

who keeps a stock polaris cage?

Let's thank speed UTV for up in the game for the rest of the manufacturers to better their utv's.

Ill take the speed any day being a fabricator. Much safer and better designed car

What you don't no the steel is low quality grade it's not u.s. standards weld may look good but it's veitnam steel