Polo Shirt Hooping and Embroidery (Ricoma MT1501 and Mighty Hoops)
Рет қаралды 35,600
3 жыл бұрынIn this video I am going over step by step on how to center, hoop and prepare a polo shirt for embroidery. I am using the HoopMaster Mighty Hoop Station to make hooping so much easier. I am listing as much details as possible but if there's something that I miss please leave us a message down below. Thank you for subscribing.
Free Mighty Hoops Shipping:
Use promo code: romero
hoopmaster.com/ref/Romero/
Or
Place orders via telephone and mention “Romero Threads”
Call Hoopmasters at: 262-257-0930 (within the contiguous US).
Must have embroidery items we use everyday.
---------------------------------
Embroidery Sharp Needle: amzn.to/3ldQnku
Ball Point Needles: amzn.to/3Yg3y3h
Graphic Alignment Ruler: amzn.to/3JUQ60f
Embroiderer's Helper Placement Tool: amzn.to/3YEIRgS
Fiskars Rotary Cutter, Titanium: amzn.to/3I8aFFd
Tide Pen: amzn.to/3Ialpmj
FlexFit Hat: amzn.to/3YDkqk5
Puffy Foam 3mm: amzn.to/3RNzd9u
L-Style Towa Bobbin Tension Gauge: amzn.to/3YjUDO5
Amazon Essentials: Items we use everyday
Must have embroidery items: amzn.to/3DStHwK
Books I read: amzn.to/3YFpsN7
Photography & KZfaq Equipment: amzn.to/40KI5AT
Shipping supplies: amzn.to/3RLwtJN
Yupoong 1501 Heavy Weight Cuffed Knit Cap
amzn.to/3e5ssNt
Visit our Embroidery Amazon Page to view what products we use for everyday use:
www.amazon.com/shop/romerothr...
AllStitch (everything you need for embroidery)
allstitch.com/?ref=RomeroThreads
Groz Beckert Titanium Coated Embroidery Machine Needles (size 80 / 12)
amzn.to/3aGyaCD
Sulky Of America 12 Color 3mm Puffy Foam Assortment, 6" by 9"
amzn.to/3m1tq1s
Gingher 4'' Curved Embroidery Scissors (best of the best)
amzn.to/3ekzOO7
Fiskars Curved Craft Scissors, 4 Inch
amzn.to/3p5Dbue
Embroiderer's Helper - Template Aid - Placement Tool
amzn.to/36FJ2jO
Towa Sewing L-Style Thread Bobbin Case Tension Gauge TM-1
amzn.to/3xxjPmr
Mini screw driver case:
amzn.to/3q8gI1K
Dritz 710 Mark-B-Gone Marking Pen Combo Pack, Blue & White
amzn.to/3oKJnYF
Duckbill Scissor
amzn.to/3qSKwP2
Odif USA 505 Spray and Fix Temporary Fabric Adhesive 12.4oz
amzn.to/3q2XZDT
Shipping Department:
Amazon Boxes: Aviditi 886 Corrugated Box, 8" Length x 8" Width x 6" Height, Kraft (Bundle of 25)
amzn.to/2Lqbvmg
ULINE 25 Clear 18 x 24 Poly Bags Plastic
amzn.to/3pU6Sje
Avery Shipping Address Labels, Inkjet Printers, 50 Labels, Half Sheet Labels, Permanent Adhesive, TrueBlock (8126)
amzn.to/2P4FAGj
DYMO Digital Postal Scale/Shipping Scale, 10-Pound
amzn.to/3pPaT8D
Photography Department:
-Hat Holder:
amzn.to/2We67rf
-Hat Helmet:
amzn.to/3rwq3kS
-Back Drop:
amzn.to/3BOHMsy
-Reflector:
amzn.to/3kQZyoL
With Amazon affiliate links, I earn a small commission and it helps the channel. Thank you for supporting.
@maryharvey724 Ай бұрын
Wow. Looks so good.
@Renuewspa 3 жыл бұрын
Loving your videos! That’s for the great details!
@allencann7229 2 жыл бұрын
Thank you, for helping us out with your knowledge.
@RickeyDen 3 жыл бұрын
As always, I enjoy your videos. I was a little lost on the measurements, but I see how it all came together once you started the embroidery portion. Great tip on using the Tide Pen!
@brandirobbins8023 2 жыл бұрын
Great video. Thanks for the tip about the tide pin!!
@guadalupebolduan2897 3 жыл бұрын
Love this video! Thank you!
@stephaniegarza3169 Жыл бұрын
Another great video! Thank you!
@LucyLu70 3 жыл бұрын
Thanks for the video much appreciative
@edishiamagee9485 3 жыл бұрын
Thank u for a great video and tutorial!
@FidelElvira 2 жыл бұрын
Great stuff!!!🌟👌🏻🙏👍🏻
@Coupella 2 жыл бұрын
Love your vids. I’ve learned so much! A small tip for you: try Frixion pens for light colored garments. The ink turns white with heat.
@RomeroThreads 2 жыл бұрын
Thanks for the comment. Ive used Dritz water soluble pens forever, the best of the best, never had any problems.
@jessiegibson9023 2 жыл бұрын
Good video thanks
@roller9158 Жыл бұрын
Thanks!
@MannyzCustomz Жыл бұрын
I like making generic patches in different sizes and use them as reference when I'm hopping
@visifalemaka9110 2 жыл бұрын
Thank you so much Romero for sharing I really need to learn that. Is that performance cut away different from the normal embroidery cut away stabilizer? All the best.
@annemason2995 Жыл бұрын
We’re do get the Embroiderers helper looking for the bigger helper one because I am sewing badges on garments
@cynthiasmith8899 3 жыл бұрын
Can you help me with the following? How long is the enbroiderer's helper. from the top of the curve to the bottom?
@GStax 2 жыл бұрын
I watched a lot of your videos. What are the best stabilizers and needles to use for stretchy t-shirts?
@sparkmajorpain 2 жыл бұрын
how to measure honeycomb collar t shirt 4xl
@callegra1 3 жыл бұрын
Thanks for a very informative video! The cutaway backing you’re using, can it be used on onesies? Also, can you sometime show us how you finish your garments? By that I mean, your finishing touches so that it looks good both inside and outside when presenting to your customer. Thank you!
@RomeroThreads 3 жыл бұрын
Yes absolutely, I can show a finished onesie, great idea. And yes, you can use that same performance cut away on a onesie.
@marimor1432 2 жыл бұрын
Buen día en dónde la puedo comprar??? Soy de México
@princessss42 Жыл бұрын
Thanks so much for your videos Romero. If you were embroidering a left chest logo with small lettering on a stretchy polo shirt (95% poly & 5% elastane) would you use the next size hoop up to reduce stretching and perhaps a smaller needle (65/9) ? (I don’t have a mighty hoop)
@RomeroThreads Жыл бұрын
Thank you for the comment. For small designs or text I would use the closest hoop size. Use a smaller needle if it looks too bunched up, you might have to do sample comparison. Sometimes it isn’t necessary.
@princessss42 Жыл бұрын
Thanks so much for the reply! I really appreciate it !
@normarangel2879 Жыл бұрын
I did my measurements on medium polo 7 1/2" down from the corner of polo and 4 inches horizontal using chalk. Put it on hoop master letter E22 but doesn't look centered.
@RomeroThreads Жыл бұрын
Shirts can have different measurements, depending on brand, style and size. You can print out your design and mark the center according to the design. I use the embroidery helper from Amazon to help us mark our center points.
@michaeloleary9130 Жыл бұрын
i embroidered the back of the shirt to the front lol
@user-kg1gk5gr3y Ай бұрын
What the design size on tshirt?
@pmm3884 2 жыл бұрын
Thanks so much for great videos and tips. If I'm using a unisex polo but a woman would be wearing it, should I use the same setting on the Mighty hoop board? I did a sample of left chest logo (4"X4") on small Hanes and I used #11 though instead of recommended 15 or 19. Do you recommend I drop it down to at least to #15?
@RomeroThreads 2 жыл бұрын
What I do, I make a center mark where I want my logo at, then I adjust the hoop to go over the center. I don't focus too much on the number because with different sizes and different brands it can change.
@pmm3884 2 жыл бұрын
@@RomeroThreads Thank you
@emuvideos-farmlife 2 жыл бұрын
Thank you soo much for these great videos! Do you ever use a ballpoint needle for the polos? If so when?
@RomeroThreads 2 жыл бұрын
Yes, I use 70/10 ball point needles with 40 weight thread or shift to 60 weight thread for fine details.
@emuvideos-farmlife 2 жыл бұрын
@@RomeroThreads Was this a ball point needle in the video? Kind of confused as to how you would make the choice to use standard or ball point. Some places say even t shirts are considered knits.
@RomeroThreads 2 жыл бұрын
Really, standard or ball point (ffg or fg) kind of fall in the same area. Sharp point I would not use on polos. I can use both standard or ballpoint. Some polo shirts are thinner than others, the choice can come down to preference.
@emuvideos-farmlife 2 жыл бұрын
@@RomeroThreads AWESOME! Thank you sir! I sure do appreciate your replies.
@loifa549 Жыл бұрын
Hi Ro! Thanks for your videos, I'm learning a lot. For the polos type of xpandex like jerseys, do you recommend ballpoint needles as well?
@deannatakacs5088 3 ай бұрын
I thought all projects needed to have the (+) in the “center” of hoop. I’m just watching your video on hooping polo shirts. In this video the (+) looks like it’s in the upper part of hoop. I’m struggling with this…I have the camera on machine as well as those snowman markers, doesn’t seem to matter, am I wrong to think that the (+) marking doesn’t have to be the in the center of the hoops??
@RomeroThreads 3 ай бұрын
Hello, if your design perfectly fits your hoop (size wise) then yes, you need to be spot on centered. If your design is smaller and has room to shift, then you can move the center around. Thats why it’s important to trace your designs before hitting start.
@nananjdz Жыл бұрын
Do you recommend to use the performance stabilizer on jersey's because of the thin material? I was going to use one sheet of no show mesh and one sheet of cut away.
@RomeroThreads Жыл бұрын
I do use 2 pieces of performance cut away. One piece of no show and one piece of cut away can work depending how many stitches the design is. We also add tender touch in the back, it helps keep the design in place also.
@nananjdz Жыл бұрын
@@RomeroThreads thank you!
@terrivining7019 Жыл бұрын
Do you increase size of logos for polos that are larger? For instance I'm working on polo shirts from xs to 6xl. Do you have a video on this? Thank you
@RomeroThreads Жыл бұрын
I would maybe start increasing the logos once I hit 3XL. Nothing too big, just a small subtle change. Also making sure it doesn't affect the digitizing.
@terrivining7019 Жыл бұрын
@@RomeroThreads ok thank you
@rosalindabotellojuarez4839 3 жыл бұрын
Is your stabilizer for this polo no show mesh?
@RomeroThreads 3 жыл бұрын
Hello, on the description of the cut away its not labeled as no show. But these have been my favorite for very thin golf shirts and normal polo shirts. They are a thin mesh material also.
@sotosbrother9389 3 жыл бұрын
What polo shirts do you like working with ? I want to place an order but dont want to get cheap ones ?? Thanks ! Enjoying the videos !
@RomeroThreads 3 жыл бұрын
Hello, I like to work with Port Authority PA Rapid Dry Polo K455. Anything priced above that is good also. And the best are Adidas, Nike and all the name brand, they just have a higher price.
@matthewoscar1276 3 жыл бұрын
if you want to place your order then we are here for you even you can visit our website also dynamicdezign.com/blog/
@Theofficialheartgallery Жыл бұрын
What size did you choose for the hoop because i can not get anything to line up with this hoop on the EM1010
@RomeroThreads Жыл бұрын
I use the 5.5 hoop and make sure my center point is in between.
@sugare71 3 жыл бұрын
I have a Ricoma and just received my mighty hoop. Can you tell me what hoop size preset to use for the 5.5? Thank you.
@RomeroThreads 3 жыл бұрын
I use hoop C for the 5.5 mighty hoops. Always trace to be sure you're good.
@sugare71 3 жыл бұрын
@@RomeroThreads Thank you!
@normoutandabout 2 жыл бұрын
When it snapped shut, why did it look like it was at least 1cm above the horizontal marking?
@RomeroThreads 2 жыл бұрын
Yea it goes above the line. Im showing the straight line before its shut. After a couple shirts of practice you don't need the lines anymore. When its shut, I am following the top to bottom line.
@normoutandabout 2 жыл бұрын
@@RomeroThreads cheers
@kcjd8659 Жыл бұрын
Do you mark each shirt or do you just mark the first one to get it set up for the order?
@RomeroThreads Жыл бұрын
Yes I do.
@RunRaceSki 3 жыл бұрын
What is the name of the stabilizer you are using?
@RomeroThreads 3 жыл бұрын
Hello, the cut away backing details is in the description.its a performance cut away from All Stitch.
@roller9158 Жыл бұрын
Sir, You have cross hairs on the shirt, how do you get the center of you logo to finish there. Thanks in advance
@RomeroThreads Жыл бұрын
I center it on the machine using the arrows. Once the needle is set in the center, I push start.
@roller9158 Жыл бұрын
@@RomeroThreads I tried that but it moves about 1” at starting
@roller9158 Жыл бұрын
@@RomeroThreads Just wanted to mention to others. Yes, that’s correct to center foot and press start but make sure your logo is center on the Y & X axis in your digitizing, for your method to work.
@normarangel2879 Жыл бұрын
What is that style of the Polo shirts? I was trying the hoop station with 5.5 hoop and it pop out of that station. Where did I do wrong?
@RomeroThreads Жыл бұрын
It shouldn’t pop off. The magnets clamps on quick. I think its probably getting caught with something, maybe the blue tab on top of the station.
@RomeroThreads Жыл бұрын
I use Port Authority 60/40 blend.
@allencann7229 2 жыл бұрын
Hello, what model polo shirts are you using?
@RomeroThreads 2 жыл бұрын
Port Authority K455
@Eventdesignbyfola 6 ай бұрын
What is the stabilizer called?
@RomeroThreads 6 ай бұрын
Performance 200 cutaway allstitch.com/products/prostitch-200-performance-shirt-cut-away-embroidery-backing-precut-sheets-white
@Eventdesignbyfola 6 ай бұрын
@@RomeroThreads thanks
@marlondewsidewskustomz9193 Жыл бұрын
Was your 65/9 needle a sharp or ball point?
@RomeroThreads Жыл бұрын
Ball point
@amoungus3792 3 жыл бұрын
I need to kno how wat number do I put the board on different size shirts??????👕
@RomeroThreads 3 жыл бұрын
For polos, I use 28 for XL, 23 for L and 19 for S/M. Try those out.
@amoungus3792 3 жыл бұрын
@@RomeroThreads thanks ima try those
@normarangel2879 Жыл бұрын
F19 for s/m?
@AndreMercado 2 жыл бұрын
theres no place on their website to put your referral code
@RomeroThreads 2 жыл бұрын
For Mighty Hoop orders, you have to call them directly. I put the number and info in the description. They'll take care of you when you call. Thanks.
@RudeDude563 6 ай бұрын
What needles do you use for these polos?
@RomeroThreads 6 ай бұрын
75/11 ball point
@RudeDude563 6 ай бұрын
@RomeroThreads thank you for your response is it FFG/SES?
@RomeroThreads 6 ай бұрын
@RudeDude563 yes FFG
@acedeleon5798 2 ай бұрын
Hi! Can you tell me your logo size? 😬
@RomeroThreads 2 ай бұрын
2.5 inches high
@RomeroThreads 2 ай бұрын
2.5 inches in diameter
GSG Graphic Solutions Group
Рет қаралды 18 М.
TheSoul Music Jam
Рет қаралды 23 МЛН