Polycrylic for Sublimation
Рет қаралды 3,963
2 жыл бұрынOne coat of polycrylic on each item: ceramic tile, wooden ornament, and canvas. Let it set over night or for at least 3-4 hours to completely dry. Then start creating some beautiful items.
LIKE , SHARE , AND SUBSCRIBE
/ craftycreationsbynms
@Desertphile 7 ай бұрын
Thank you.
@nicolescraftycreations 7 ай бұрын
You're welcome!
@oliverwjones Жыл бұрын
When heat pressing ceramics and glass, it takes a LOT longer than usual. Conde recommends 3 minutes at 400° for 2"x2" ceramic tiles. 12"x12" tiles they recommend be pressed for 7 minutes!
@nicolescraftycreations Жыл бұрын
Thank you 😊
@rebajackson1077 11 ай бұрын
Maybe you need to wait for it to cool a bit before peeling it off
@jalalquadirnayan2990 2 жыл бұрын
Hi Nicole, you think this would work on rubber flip flops ??
@nicolescraftycreations 2 жыл бұрын
I am not sure but it wouldn’t hurt to try. I might have an pair I can try it on and let you know.
@nicolescraftycreations 2 жыл бұрын
Hi Jalal, I did try it in a pair of rubber flip flops and guess what?? Yes, you can. I will post the video in the next few days so you can see the full results. It’s a little tricky.
@gszeluga Жыл бұрын
Don't use teflon with sublimation. It's holds moisture. Just butcher paper
@brankalipar6146 Жыл бұрын
And what is the temperature and time for canvas?
@nicolescraftycreations Жыл бұрын
Temp 380 for 60 seconds
@jessicae7229 2 жыл бұрын
I think u didn't give the poly enough time to cure n thts y it looks melted.
@nicolescraftycreations 2 жыл бұрын
Hey Jessica, I let it cure for over 8 hours. What would you recommend for the curing time?
@johntrevy1 Жыл бұрын
@@nicolescraftycreations Overnight to be on the safe side.
@mariewoods6798 17 күн бұрын
Stop with the music please
Southpaw's Studio
Рет қаралды 36 М.
Simply Sallie
Рет қаралды 125 М.
Southpaw's Studio
Рет қаралды 180 М.
All things Styles
Рет қаралды 6 М.
TheMakersHQ
Рет қаралды 1,6 М.
Makers Gonna Learn
Рет қаралды 368 М.
RFC Fighting Championship
Рет қаралды 501 М.