PolyGloss Tile vs Sublimation Coated Ceramic Tile| Comparison

Рет қаралды 11,625

Күн бұрын

In this video, I will be comparing polygloss tile vs sublimation coated ceramic tile.
In this video, I will be going through the various steps and doing a comparison between sublimating a Polygloss Ceramic Tile vs a Sublimation Coated Ceramic Tile.
In the video, PolyGloss was coated on the 6x6 standard Ceramic Tile which was bought from a tile. Once it's coated, allow the tile to dry on its own for 1-2 hours. After, bake it in an oven for 300F @ 22 minutes.
Sublimate PolyGloss ceramic tile for 400F @ 10 minutes with a Light Pressure.
Sublimate coated sublimation ceramic tile for 400F @ 6 minutes with a Light Pressure.
If you would love to Contribution and help support the channel send it to:
Paypal: www.paypal.me/pianoboy21
Get your Polygloss here 👉bit.ly/3CYZqu1
Get your Sublimation Ceramic Tile here 👉 shrsl.com/41qso
Get your Clear Spray Paint here 👉amzn.to/3Hejaey
A-Sub 105 G Sublimation 8.5 x 11 paper 👉amzn.to/3GhrDhg
A-Sub 125 G Sublimation 11 x 17 paper 👉amzn.to/2WYGdZa
Swing Design Cameo, HTV & much more 👉 shrsl.com/2upkf
Get your sublimation blanks 👉 makerflocrafts.com/atprintssu...
Get your HeatGun 👉 amzn.to/3jxJqqG
Get your Sublimation Blanks, HTV, Equipments, Printables, Clothing, Rhinestones, and Custom Transfers 👉 www.heattransferwarehouse.com...
Amazon Links:
Use my Amazon affiliate links below for shopping.
Amazon Heat Press 👉amzn.to/32zdT2m
Silhouette White Cameo 4 👉 amzn.to/3rO3Uxx
A-Sub Sublimation Paper 👉amzn.to/2OWARJW
Printers Jack Sublimation Ink 👉amzn.to/3cp1OOk
Sublimation Keychains Blanks 👉 amzn.to/3thJ6ij
Transfer Tape for Vinyl 👉 amzn.to/2ONvFI6
Joyinland Heat Transfer Vinyl 12'' x 20 feet 👉amzn.to/2OsPLYc
Round Sublimation Rubber Coasters 👉 amzn.to/3wp5d8c
Hiipoo Sublimation Ink 👉amzn.to/3syHsco
Round Sublimation Coaster👉amzn.to/35Es9oI
Heat Resistant Tape👉 amzn.to/3xuctQw
Blank sublimation metal name card 👉amzn.to/3gIYIXD
Other videos you may be interested in
How to sublimate on 17oz water bottles 👉 www.youtube.com/watch?v=09bhZ...
How to coat on stainless steel with polygloss👉 www.youtube.com/watch?v=3QGCU...
Watch how I coat on Ceramic Items 👉www.youtube.com/watch?v=U-ymH...
Sublimation on 100& polyester 👉 • Sublimation Printing o...
Sublimating on Ceramic Plate 👉 • Sublimation Printing o...
Sublimating onto a tile 👉 • Sublimating on Ceramic...
🔴 Subscribe for more free KZfaq videos: kzfaq.info/love/hQT...
🔴 If this content brought any value or impacted you please like and share this video.
🔴 Leave your comments below if you have tips, questions, or would love me to do another video.
============================================================
Social Media:
▶️ Instagram: / allan21thom. .
▶️ Facebook Business Page: / allan21thompson
▶️ Email: atprints47@gmail.com
If you would love to Contribution and help support the channel send to:
Paypal: www.paypal.me/pianoboy21
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links. This will not cost you extra to use my links/codes. This is another way to support me and my channel.
Thanks.

Пікірлер: 108

@atprints 2 жыл бұрын

Make sure to watch the full playlist on PolyGloss and Sublimation here 👉 kzfaq.info/sun/PLWFr5junSpJ10qFYpBDROw6FCcyDlGebp

@RVincents 2 жыл бұрын

I am so watching anything you put out.. The absolute best explanations... I will be recommending you in groups

@atprints 2 жыл бұрын

@@RVincents thanks so much for your comment and I am happy I can give and help. Yes, any groups would be great so persons can benefit.

@SlickDiecast 4 ай бұрын

This is exactly what I was looking for. Thank you very much.

@atprints 3 ай бұрын

You are most welcome and thanks for the support.

@caroljandreau7748 2 жыл бұрын

Absolutely gorgeous! Thank you so very much

@atprints 2 жыл бұрын

You are welcome.

@TechHobbyTH 7 ай бұрын

Just awesome. Simple and clear.

@atprints 7 ай бұрын

Thanks very much for your comment and support. I truly appreciate it.

@manny3350 Жыл бұрын

You are the best. You go through each step very well. Your video is simply the best.

@atprints Жыл бұрын

Thanks so much for your support.

@phil7791 11 ай бұрын

That's incredible! I'm amazed how smooth the Polygloss goes on. Theres no brush strokes at all in it. Im really interested in apply this process to slate as Ive got loads of it.

@atprints 11 ай бұрын

Awesome. I’m happy you got value. Yes, the Polygloss is truly amazing.

@RVincents 2 жыл бұрын

What an excellent video.. You are a marvelous teacher! So thorough and so generous to help us... Everyone should watch this... You sir are an excellent teacher.. It's a gift!

@atprints 2 жыл бұрын

Thanks very much. I appreciate your support I really do.

@celestemunoz826 2 жыл бұрын

Excellent! Thanks

@atprints 2 жыл бұрын

You are welcome

@ACB2K Жыл бұрын

Damnnn, amazing!!

@MrJj2001 7 ай бұрын

Beautiful! Good job

@atprints 6 ай бұрын

Thank you! 😊 very much for your support

@humassoap2654 Жыл бұрын

Thank you so much 💖 Very informative videos Congratulations

@atprints Жыл бұрын

I want to thank you for watching and also commenting. I appreciate it.

@247KW 5 ай бұрын

Love your videos

@atprints 5 ай бұрын

Thanks very much. I will continue to try to do my best in them to give greater understanding.

@bridgebeautystudiollc Жыл бұрын

Thanks for sharing

@atprints Жыл бұрын

You are most welcome.

@samsonmaina4147 2 жыл бұрын

am 100% sure the poly gloss coated tile looks perfect...i love the creativity .

@atprints 2 жыл бұрын

Thanks very much for your comment. I agree with you. The polygloss looks really good.

@midgetsmommy 2 жыл бұрын

But, you did leave the big one in the press longer. Another minute or so on the small one might have made the difference.

@paulinewatson6042 2 жыл бұрын

Excellent job 👏

@atprints 2 жыл бұрын

Thanks for your comment 👍🏾

@DhanSinghmedaMeda-we3br Жыл бұрын

Right bro

@vikki92411 Жыл бұрын

They both look nice

@atprints Жыл бұрын

Thanks very much.

@247KW 5 ай бұрын

The big one is gorgeous

@atprints 5 ай бұрын

Thanks very much for your support and comment.

@melissacann2058 6 ай бұрын

Nice comparison. Question: It is obvious that polygloss is heat resistant and is cured by being baked in the oven. For practical purposes, you said the tile needs to be sealed to ensure added long lasting protection. If you were to intend to use the 6x6 polygloss treated tile as a trivet, what product would you use that is high heat, cold and water resistant?

@atprints 5 ай бұрын

Thanks for your question and sorry for the late response. In this case, even if the tile is treated and you want to sublimate onto it, you would have to use the polygloss. I would still recommend using the clear coating after. There isn't really a time when you will have tiles exposed to extreme heat. Yes, you may use them in the bathroom where hot water will run on them or outside on the porch where sunlight would be but it can handle it. The most that can happen is fading after a time. I hope I answered the question and if I didn't please let me know.

@witchycop13 2 жыл бұрын

The tile you used poly gloss on definitely came out better. You are the first person I go to when I'm looking to do something new with sublimation. Thank you so much for sharing your knowledge

@atprints 2 жыл бұрын

Thanks so much for this comment. This comment truly warm my heart. Thanks so much I appreciate your support.

@elainesdoodles6684 Жыл бұрын

Brilliant video. I thought you explained everything really clearly. Thanks so much and by the way I li,Ed the polygloss tile best although they were both spectacular.

@atprints Жыл бұрын

Thanks so much for your comment, support and stopping by to view this video. I am happy to know that the information was clear for you to understand. I also agree with you about the polygloss tile. I like it best also.

@elainesdoodles6684 Жыл бұрын

I’m thinking of sublimating some of my art work onto tiles (wildlife , mandalas etc ) so this video was particularly helpful. I also watched your plates one as well and my only problem is I need a plate press now as well 🤣

@atprints Жыл бұрын

@@elainesdoodles6684 awesome, I am really interested to see some of your artwork. If you aren’t planning to go heavy into it you can try to get one from Amazon but if you are looking to really push the plates etc in your business I would advise getting a professional heat press with all the attachments so it could give you the finish you want and also it would last longer. If you are interested in that professional heat press let me know and I’ll send a link.

@margaretmongerie2383 2 жыл бұрын

Polygloss is giving more colour. Good!!

@atprints 2 жыл бұрын

Thanks for your support and comment

@ACB2K Жыл бұрын

Polygloss, is the clear winner!!!!!🥰🥰🥰🥰

@atprints Жыл бұрын

Thanks very much for your comment and support.

@carriesmith9893 Жыл бұрын

Great job! I love love this image. I’m in the process of getting everything together try to this! I have a regular toaster oven not convention I never use. If I can use it what would be the temperature and time to cure the tile. Most of all where can I find that image? Thank you!

@atprints Жыл бұрын

Thanks for your question and your comment. You can use the normal bake settings on your toaster just make sure that you keep a close eye on the tile so it would not turn brown. Bake in the oven for 300F for 10 minutes. You can send me an email atprints47@gmail.com and I could send you the picture. I hope this reply helps you while you are on your journey.

@kwandaslawson558 Ай бұрын

Thank you so much for doing this demonstration, have you or do you know if the tile will fade if left in outside in summer weather temperatures?

@atprints Ай бұрын

Thanks for your question. With the polygloss tile I would recommend keeping it out of the sun. I do believe after a long time of exposure sun it will fade. As you would know the sun is even hotter now than before. In terms of the original sublimation tile I am not 100% sure.

@scottmichielli5670 Жыл бұрын

Hi Allan. Thank you for doing this video. I've been using subli glaze to coat tiles and am now considering giving dyepress a try. I'm concerned about getting streaks. In your experience, how much of a problem is that?

@atprints Жыл бұрын

Sounds great! In relation to streaks, I would advise when brushing on the solution to gently pass the brush onto the item. If you apply a lot of pressure then you will definitely get streaks and also bubbles. In addition when you cure the item, in most cases the streaks disappear. I look forward to seeing you finish work with the polygloss.

@nubienespokenword9722 Жыл бұрын

Wow saved by a brother….. The only thing I have no outside space so it would be difficult

@atprints Жыл бұрын

Thanks for your comment, when you refer to space are you meaning in terms of using an area to apply the Polygloss because of the smell?

@leonaflugstad700 Жыл бұрын

Mine is super streaky! And recommendations

@atprints Жыл бұрын

Sorry for the late response. If you are using the brush method with Polygloss try to reduce the amount of pressure you put on the brush when applying the Polygloss.

@ShirleyJackson-sf6wp Ай бұрын

Thanks so much, great video; thanks for step by step details. Question: I'm getting some haze on my finished product (using the polygloss) after heat pressing on 400f for 600 secsonds. Can you give me some advise please. TY!

@atprints Ай бұрын

Thanks for your question and sorry for the late respond. You can try reducing the temperature to 385F. Make sure that you tape down your design onto the tile so it wouldn’t move when you are pressing it and when it’s finish. You can send me a picture of it on my instagram or Facebook so I can see and I would be glad to assist more.

@ShirleyJackson-sf6wp Ай бұрын

@@atprints Thanks so mjuch, I will try! I am using ceramic tiles.

@danielpuscasu6683 28 күн бұрын

❤❤❤

@atprints 27 күн бұрын

Thanks for your support.

@osedura1 Жыл бұрын

always with you are great . where am I going to buy the silicone sheet?

@atprints Жыл бұрын

Thanks so much for your comment and support. You can ge tthe silicone sheets here 👉 amzn.to/3QRGbZU

@cindyhamel4007 Жыл бұрын

Definitely the one with Poly applied was better

@lisag2185 Жыл бұрын

Thank you for sharing this info. Do you still need a sublimation printer?

@atprints Жыл бұрын

You are most welcome and I hope you did got valuable information. If you are asking if I need a sublimation printer the answer is yes and I am honestly trying to save for it. The printer I currently use at this moment is a converted printer which causes issues at times but it works. If you were asking if you do need a sublimation printer for this process then the answer is yes.

@robertosatta7536 Жыл бұрын

complimenti sei stato chiaro... perche non fai lo stesso esperimento su una lastra in allumino? magari con una foto in bianconero. Grazie e ciao.

@atprints Жыл бұрын

Grazie mille per il tuo commento e per l'idea. Ho un pezzo di alluminio seduto lì da molto tempo. Lo userò sicuramente in un video.

@robertosatta7536 Жыл бұрын

@@atprints thanks it would be interesting, I tried with an aluminum printing plate, I covered it with a sheet for lamination, but the result was good but with a ble toning, it would be nice to try with the products you use.

@brencarr3629 Жыл бұрын

Did you have to let the 6x6 cool for a while before removing the sublimation paper? If so, how long did you wait?

@atprints Жыл бұрын

Thanks for your question. You can allow it to cool for 1-2 minutes and then take a damp cloth and slowly pass over the tile so the paper can get wet. With Polygloss sometimes the paper sticks to the item so give it 1-2 minutes to cool, use a damp cloth or get a spray bottle and spray the paper to soak it, then peel it off immediately. I hope this helps.

@robertporter4331 Жыл бұрын

The PolyGloss is more saturated but is the detail as sharp? I can't tell from the screen but it looks somewhat less sharp to me. Q: how clear is the PolyGloss coating? Is it crystal clear or slightly cloudy?

@atprints Жыл бұрын

Thanks for your comment. The Polygloss is crystal clear.

@sondaysanguinetti506 Жыл бұрын

Is baking the tile necessary? I have not done this process and do not have a convection oven.

@atprints Жыл бұрын

Thanks for your question. Once you are using the polygloss process you should bake the tile. By baking the tile it’s actually curing it. You don’t need a convention oven. If you have a standard oven that can also work just make sure the temperature is correct and monitor it.

@tashikerogers8585 Жыл бұрын

My pictures will be in the sun. What coating can I put on top UV resistant to stop picture from fading?

@atprints Жыл бұрын

Thanks for your question. This is a very good question and I am not 100% sure. The UV resistant or Clear Coat stop any damage from getting on top of it but i am not sure if you will be able to stop the sun from impacting it. This question I am honest no 100% sure.

@erimeljc5013 9 ай бұрын

🥱🥱🥱🥱🥱🥱🥱🥱👎👎, 29:49 min pour çà ??

@johnmarcel2322 2 жыл бұрын

Is sublimation on ceramic plate waterproof...or does it fade with time.

@atprints 2 жыл бұрын

Thanks for your question. Yes, if you sublimated a sublimation plate you can wash it.

@DUCKSJO Жыл бұрын

if I don't have an oven to cure the tile, and only have a heat press, is that doable?

@atprints Жыл бұрын

Yes you can you the Heat Press. However you would have to apply light pressure and monitor it.

@zootasplace7344 6 ай бұрын

@@atprints You don't want to close the press if you use a heat press! You will not get good results. Just slide the tile between the two plates and let the heat do the work. Don't close the press.

@cassiestoppiello8595 2 жыл бұрын

Can you use a heat press to cure the tile?

@atprints 2 жыл бұрын

Thanks for your question. I do believe you can however, you might have to let it sit for 1-2 hours after you apply the quote of polygloss then use the press after.

@zootasplace7344 6 ай бұрын

Yes you can. Just place the tile under the heat press, but don't close the press, the heat will cure the poly coating slowly. About 30 minutes would work, or until the coating isn't wet or sticky.

@seanrussell2020 2 жыл бұрын

are these good for outdoors? or would UV fade them?

@atprints 2 жыл бұрын

If you are referring to the tile which Polygloss was applied onto i would say it’s best to keep it in a nice shaded area so the sun would affect it. If you are referring to the actual ready done sublimation tile then yes it can go outdoors.

@tommcculloch5278 10 ай бұрын

They cannot go outdoors they will start to fade within 3 months, after 6 months they will start returning to the base colour. There are expensive sprays that can be sprayed over, they only delay fading. UV is the enemy of sublimation, Only the enamaling technique used by the stone masons for example grave pictures will remain with no change over years.

@janetjones3076 2 жыл бұрын

Hello. I have been testing this on tiles after watching your video and getting terrible results. Not sure what I'm doing wrong. Product is NGOODIEZ process is the same. I even changed to the sampe paper you are using but still getting poor results? They are coming out streaky and light? Could it be pressure?

@atprints 2 жыл бұрын

Hey thanks for your question. I also saw your email and did response to it. I believe the problem base on seeing your pictures are streaks to the heavy brushing. You may have to be much lighter on the brush.

@TajmahalTuhin 4 ай бұрын

Color is guaranteed by using either

@tommcculloch5278 10 ай бұрын

An equal test should have the tiles of same size and weight, using the same timings heat and pressure. Using a larger tile to compare against a smaller time is not a fair test, unless of course you are promoting the Polygloss on their behalf as an agent . The larger tile will always win. The process to buy tiles, coat them, us an oven to cure them, the preparation is all time consuming, the smell, the space required does not make this a cheaper way of sublimating.

@atprints 10 ай бұрын

Thanks for your comment.

@MsCarolstrong 6 ай бұрын

can you eat off polygloss sublimation

@atprints 5 ай бұрын

Yes, you can eat off the plate as it's noted by the company it is FDA-approved and safe.

@DhanSinghmedaMeda-we3br Жыл бұрын

2*2 photo print kro

@atprints 7 ай бұрын

thanks

@seanpaul5331 5 ай бұрын

You literally heat pressed the small one the wrong way. How dumb. Completely destroyed the scientific process, experiment. Otherwise great video. I dont get it. Polygloss is good stuff though.

@atprints 5 ай бұрын

Thanks very much for your comment.

@MrJj2001 7 ай бұрын

You know you talk to much, and you still talking to much! I’m out it doesn’t take that long just to start doing something 😒

@atprints 7 ай бұрын

Thanks for your comment and feedback. It’s appreciated.

@MrJj2001 7 ай бұрын

@@atprints Good! No disrespect! Your content is good and appreciated, but you take to long laying out the steps in your process, let your video speak for itself! And your followers can ask questions relevant to their interests! Time is money!

@atprints 7 ай бұрын

@@MrJj2001 thanks very much. I will surely work on it.