Make Easy Skinner (Teardrop) Blends with no Pasta Machine

Рет қаралды 178,307

10 жыл бұрын

Video #487: It takes a bit longer if you only have an acrylic roller, but the end result is the same. More Info: www.beadsandbeading.com/blog/?... Polymer Clay Tutor.
Topics Covered In This Video:
* Making beautiful and easy color blends.
* No pasta machine? No problem. All you need is a roller of some sort.
* Teardrop Blends or Skinner Blends are color gradients using more than one color of polymer clay, where the colors gradually shift from one to the next.
* My Teardrop Blend is an easier and faster version of the Skinner Blend.
* Choose 2 or more colors to that you want to work with.
* Softer clay is definitely easier to blend when you are not using a pasta machine.
* Shape balls of clay into pointy teardrop shapes.
* Lay teardrops next to each other in alternating directions.
* Flatten the teardrops into a thin sheet with your rolling tool.
* Fold or roll the sheet, keeping colors aligned in one direction.
* Pushing in the ends of the rolled up blend will keep it from getting too wide.
* Flatten the folded/rolled piece again, until it becomes a flat thin sheet.
* Repeat process until colors are fully blended.
* Related Video: Lietz Teardrop Blend - Color Gradients Made Easy... www.beadsandbeading.com/blog/?...
* Related Video: Polymer Clay Skinner Blend Instructions... www.beadsandbeading.com/blog/?...
* Related Video: Stepped Graduated Color Blend - Old School Gradients... www.beadsandbeading.com/blog/?...
* Q&A... www.beadsandbeading.com/blog/?...
* Polymer Clay Tutor... "Make what you love... Love what you make."

Пікірлер: 238

@StudyGlassHealer 9 жыл бұрын

I just discovered today that if I steam the clay over a pot of boiling water it softens quickly and I just dry the moisture off of the clay piece. It works really well to soften a large piece of clay.

@frankieallison2119 6 ай бұрын

You can also put it in the microwave for a couple seconds! 😊

@erinalex1033 8 жыл бұрын

Goodness gracious. I thought i had to buy a pasta machine. I was saying to mysef "there has to be another way!!!!" Thank you so much!!!!

@renlish 10 жыл бұрын

Don't know why I didn't think of that - I was fretting over not having a pasta machine. A friend sent me one but this was just too obvious. :) Great tip.

@PolymerClayTutor 10 жыл бұрын

Hi Brianna Dacosta, you can use blends like these for tons of polymer clay projects, including making canes. If you look through my tutorial playlist, you will see several examples of tutorials where I use a Teardrop Blend in them. kzfaq.infovideos?shelf_id=6&sort=dd&tag_id=UCHnfmkZSQzXUcy71-VPtMlQ.3.polymer-clay-tutorials&view=46

@PolymerClayTutor 10 жыл бұрын

Thank you Little Fat Dragons

@angelamullins8574 7 жыл бұрын

Love watching these polymer clay and wire jewellery videos. Also appreciate that you all do full explanation videos and this one is brilliant because you take into consideration those without a pasta machine. Thank you for the video tutorial.

@daystardanes 10 жыл бұрын

Thank you Cindy. I have been tutorializing my learning over a couple months and I love your videos. I have gotten frustrated with blends and when you showed how you tuck in the ends, that made a lot of sense. Thanks for helping us all learn...You are so delightful to watch and I love your bubbly personality. Keep up the great work... those of us that watch you really appreciate you.

@PolymerClayTutor 10 жыл бұрын

Thank you very much daystardanes for the kind comments! I really appreciate you saying that! :)

@daystardanes 10 жыл бұрын

No problem, Cindy... its the truth. Sometimes, we never know when a "sweet answer" turns a heart. Your joy comes through in the way you talk to us. You never know what people are going through and a happy cheerful voice can make all the difference.. :0)

@PolymerClayTutor 10 жыл бұрын

daystardanes :)

@Iceytiger181 10 жыл бұрын

SUCH A SPLENDID TUTORIAL! I NEVER THOUGHT OF THIS! I am really happy that I learned how to blend colors in such a easy way! Thank you so much Cindy!

@SpecialInterestShow 7 жыл бұрын

These are relaxing to watch

@writteninstone7677 8 жыл бұрын

Great tutorial! You make an EXCELLENT teacher! Love your channel.

@kaylaiosefa4391 10 жыл бұрын

I just love the different techniques u use in your videos

@mmmmnda 8 жыл бұрын

Wow. This is so useful. I am not "new" to polymer clay, but I dont expand my techniques. So, I needed a video explaining how to do it. Thank you so much! :)

@rocket7770 3 жыл бұрын

thank you so much, I've only just started experimenting with polymer clay, and so far I've only made handles for my crochet hooks. but I've really been envious of all the amazing skinner blends I've seen (there's no way I can afford a pasta roller in the near future) and now I can give it a go by hand :)

@babolescreation8609 9 жыл бұрын

u are like mu polymer clay mother , u are really helpful

@SheRockz 3 жыл бұрын

Thank you so much for this! 😊 I don't have a pasta maker and decided to try a skinner blend for the first time. It came out so great! I did 3 colors as well.

@angelinaboni1223 8 жыл бұрын

That's so helpful, I usually end up with brown sludge but I will give this method a try and maybe I will master the technique at last! Beautifully demonstrated, thank you.

@sandrahenry3050 9 жыл бұрын

Thank You Cindy teaching my Granddaughters 9 & 7 how to blend clay. great video. thanks for sharing. Sandy

@theladyamalthea 7 жыл бұрын

Thank you so much for this tutorial! Now I can finally do a small batch skinner blend by hand!

@LoveLandforChrist 10 жыл бұрын

Thanks Cindy I do not have a pasta machine So I have fav'd this video....I know I will look at it again. Much love!!!

@pilycebrian 7 жыл бұрын

Muchísimas gracias, su consejo me ha sido de gran ayuda. Muchos éxitos!!!

@CPegRun 2 жыл бұрын

I love this video!! Quick and very helpful!! Thank you!!

@Dani-tz6jz 8 жыл бұрын

Thanks for sharing, I don't have a pasta machine and am new to PC but your tut has helped me understand easily how to obtain the results for the skinner blend!!

@yelloworangered 4 жыл бұрын

Very clever. Thank you for this video.

@nessapainter 2 жыл бұрын

Great tutorial. I've a friend who is just starting to work with polymer and doesn't have a pasta machine. This will be a great help! Thanks.

@kailaniorner1818 9 жыл бұрын

Thanks so much I have been wanting to make a skinner blend for so long. Now I can.

@jacquieparryfabulousjaxx 7 жыл бұрын

I love your tutorials, I dont want to use a pasta machine, and I found your blend so easy to do, I hated the strict rules of a skinner end, your method is fantastic

@natashamadden1074 8 жыл бұрын

Yay!!!!! Been wondering if this was possible! Thank you! LOVE your videos!

@Sopisacat 6 жыл бұрын

Thanks for this video. I am just getting into polymer clay & don't want to get a pasta machine just yet. But I do love the look of the skinner blends. So, pretty. Thanks again.

@jounnerstall6209 10 жыл бұрын

Thank you for this easy demo!!!

@MyselfMasked 9 жыл бұрын

thank you so much for these videos! they are extremely helpful! I am a beginner in terms of polymer clay (any clay actually o.O) and your videos are by far the best - easy to understand and follow and loads of good tips! thank you!

@PolymerClayTutor 9 жыл бұрын

Thank you G Bat ... glad you are enjoying the videos :-)

@marisadavis8140 9 жыл бұрын

Thankyou so much PolymerClayTutor I have not yet got a pasta machine since I am so new to polymer clay. But tgis has helped me so much with some of your designs and other youtubers designs. Once again THANKYOU !!!!!¡¡¡¡¡¡¡¡¡¡¡!!!!!

@vequihellin 6 жыл бұрын

As someone who can't afford all the fancy machines and only likes to dip into polymer clay occasionally, these tutorials are great. You present really well and your instructions are clear and concise. Thank you

@PolymerClayTutor 6 жыл бұрын

Thank you so much for saying that! I appreciate your kind words and am happy that the information is so helpful for you! 💖

@bonniefaltz9505 6 жыл бұрын

You are one of my go to tutors for techniques and I love this teardrop idea. Works well for me. thanks for sharing. BTW, hope you will be making more videos soon.

@PolymerClayTutor 6 жыл бұрын

Yes more videos will be coming :)

@dawsie 9 жыл бұрын

Thank you for sharing at least I know what I was doing was on the ball. :-) I have the pasta machine and I love using it for doing my skinner blends but I have been cheating by rolling my blends and flattening them before putting into the machine back at number one and working my way down the numbers to 9 and then I roll it backup and start all over again I have found that it gives me as you say a faster mix but also I don't end up wasting some of the clay due to it stretching all out of shape in places. I found rolling it backup into a roll and tucking in the ends brings it all back square and I have ended up with a far better blend doing this :-) I love watching your little videos and when I finally can afford it I will be signing up so I can do some of your lessons special the one on the sweet peas :-) as I wanted to,learn this one so,I can adapt it to the Australian Sturt Desert Pea :-) which I know will make a stunning pair of earrings :-) Thank you for all of you time that you do share for free :-) it really does help those of use who are really short on pennies :-) Have a great day :-)

@doraalvarado9558 7 жыл бұрын

I enjoy your videos a lot. Thanks for sharing!!!

@jbmothweaver 10 жыл бұрын

Thanks for the great tut! Love all your videos!!

@katconley3359 6 жыл бұрын

Thanks for all of your great advice!

@donutlover1012 8 жыл бұрын

Wow your so good at this!! You deserve 100,200,300,400,500 subs😄👌🏼

@KaarnaNyx 7 жыл бұрын

Omg! Thank you for this video! I was really beginning to lose hope that I wouldn't be able to do these blends without a pasta machine!

@MondoinunditoCreations 10 жыл бұрын

This is awesome, thank you so much for being on youtube!

@Gradkitten10 10 жыл бұрын

Thank you so much for doing this video! It helped alot!

@laurenmathews7426 3 жыл бұрын

Such good tips! Thank you so much for sharing 😊

@carolinas6614 3 жыл бұрын

Thank you for sharing this!!

@elovien 8 жыл бұрын

THANK YOU i loved the video its was very informative, i am a newb at polymere clay and you showed me how to do a blend in a simple and understandable way.. and i really like your personality and voice.. you have a new subscriber right here. Cheers :)

@Jglabb 10 жыл бұрын

OMG ! THANK YOU SO MUCH! i can now make my avocado (:

@locke8847 3 жыл бұрын

🤣

@stellagirl7625 6 жыл бұрын

Wow! I'm glad I found you. Nicely done tutorial!! Thank you, I'll be back!!!

@moniqaf 3 жыл бұрын

Thank you. Just what I needed

@jcofortco 8 жыл бұрын

Have read your emails for MANY years now, but NEVER caught a video until tonite. THANK YOU soooo very much for this! I don't have a p.m. but DO have a rod so will now be practicing making these. I'm just THRILLED to finally be able to make this look! Cheers, and thanks for the many lessons over the years. :) ~JO

@PolymerClayTutor 8 жыл бұрын

I don't understand, if you have been getting my emails for years, why have you not watched the videos? There has been hundreds of videos over the years. There is way more value in the videos than what is written in the newsletters. I feel bad that you have missed out all these years. Hopefully you will start watching the free videos now. There is a new one every week!

@jcofortco 8 жыл бұрын

Oh Cindy,...MY BAD, I'm so sorry, you must think I'm simply Batty! :-/ I was in a hurry (as I write my notes 1st in Word then copy/paste to YT comments), ... & I apparently c/p'd the wrong edited paragraph without catching it! My comment SHOULD have read: "I've never caught a video ABOUT SKINNER BLENDS until tonite." (Why? It's something I've always Meant to go back and watch because it interests me, but frankly I felt Very Intimidated because those pieces in that style always look sooo complicated, so I'd tell myself to go back later & watch,... life would get busy, blah blah blah...) Now that I've seen this one though I understand it's not Nearly as complex as I'd imagined so I will go back and track those ones down! :)

@PolymerClayTutor 8 жыл бұрын

Ohhh... that makes more sense! :) I am glad you have gotten over your fear of techniques that you thought were too hard. Everything I teach is doable. Some may need more practice than others, but you should never be intimidated by polymer clay... it is just a hunk of plastic after all!

@genevievesuzi1549 3 жыл бұрын

I love this! I have a pasta machine for my clay but when my husband is sleeping I can't get it out so through the day I just use your technique! Thank you ☺️✌️ much love from Tennessee

@PolymerClayTutor 10 жыл бұрын

Don't have a pasta machine yet and still want to make Skinner Blends? This video shows you how to make a Teardrop Blend with No Pasta Machine... #polymerclaytutorials #teardropblend

@abhmjtheoneeyedbeader9717 10 жыл бұрын

I am pretty new to Polymer Clay and have just ordered a load of Premo, you need a lot of equipment to go with, so for now I will buy a roller and invest in a pasta machine soon! These tutorials are so helpful to novices like myself, thank you!!

@lauraburston4222 10 жыл бұрын

I love your designs but your face at 5:34

@leetau8429 7 жыл бұрын

im new to polymer clay also and the only things i have brought are some blades and varnish, any kind works you dont need sculpy brands. i use skewers,stamps, spoon and cutlery handles with patterns anything with texture. i have a bottle as my rolling pin and pulled apert pens for small circles. just look round your house with clay in mind and im sure u will find some useful things. o also soda cans make cuff templates and bend and u can make cutters easy by cutting the cans into strips,fold/bend to the shapes u want and cellotape them down the join but take care when using them as sometimes they can cut. hope this helps and good luck with your clay journey.

@leetau8429 7 жыл бұрын

i 4got to say that eyeshadow with a shimmer look contains mica and works well

@MrsLynxx 7 жыл бұрын

Are you talking about used eye shadow or the stuff you get at dollar store?

@jaesenadam 4 жыл бұрын

Wow. Very helpful! I think I can use it for fondant too. Thanks so much!!

@PolymerClayTutor 4 жыл бұрын

Yes you can definitely use it for fondant too! I also make cakes and have used my teardrop method to make cool blends in my fondant. Try it and let me know how it goes!

@samantham5237 5 жыл бұрын

I've been so obsessed with clay lately. First I made the homemade clay. I made a bowl changing the colour with acrylic paint before it dried. Turned out so so but you could tell it was cheap clay. I appreciated the DIY I watched to make it but that just got me more addicted. So I bought white DAS air dry clay. I made a witch mushroom house that has turned out more beautiful then I could of ever hoped. Again I appreciated the DIY. I wanted to try polymer clay. All these beautiful canes. I just want to play and create! But I was very worried not having a pasta machine. I've been trying to find one that doesn't cost a fortune but the cheapest one I can find is around $100. I can't justify that right now 😞 but I have a bunch of colours of the polymer clay and some necessary tools to start. I'm so grateful that someone like you has taken the time to teach us how to DIY without a pasta machine. You are a gem. Thank you SO much. Very much appreciated. I have subscribed and liked and turn the bell on. Create away girl. You have lots that love and appreciate you!

@PolymerClayTutor 5 жыл бұрын

💖💖💖 Wow thank you for the kind words! I can totally understand the addiction! Loved it so much that I dragged my husband in, and we have a full-time business with it! 💖💖💖

@TheLPSTeensies 9 жыл бұрын

OMG Thank you for this video!!! It was so helpful and useful! :D Thank you!!!!!

@pjshat 10 ай бұрын

Great video! Thank you!

@shamardaniel4819 6 жыл бұрын

Amazing as always, thx sooo much!!!

@wonder246 9 жыл бұрын

Well thank you very much! I almost lost hope of making blends since I have no pasta machine :)

@conniemorrisroe9318 10 жыл бұрын

Thank you SO much for your videos, they are very clear and helpful! Also, you are the first person/tutorial I've seen that actually uses small amounts of clay rather than monster amounts. As a beginner, I appreciate this since I am not trying to mass produce humongous canes (especially when I'm not good enough to guarantee success yet, lol) and potentially waste a lot of clay making a bad item. I did a reasonable job on my first attempt making a teardrop rainbow blend :D

@PolymerClayTutor 10 жыл бұрын

Thank you Connie Morrisroe for saying that! It has always been my thought that unless you are a professional selling your canes, it doesn't make sense to make large canes. If you do a poor job of making or reducing your cane and you have used a lot of clay making it, you may not feel confident enough to make another one. But if it is small, it doesn't matter if you make a mistake. Then when you are good at it, you may not want miles of the same design in the same color. Either way, smaller canes make a lot more sense for the average clayer!

@lesliegulyas148 6 ай бұрын

Thank you. I don't have a pasta machine so this was very helpful.

@joynd 8 жыл бұрын

Great video! Thanks!

@jodysennott3043 4 жыл бұрын

Thank goodness I saw your video! Im making a present for my Sister. Im trying to learn flower canes so I can put some her picture frames. I didnt know you could roll, instead of folding. Thank you so much.

@PolymerClayTutor 4 жыл бұрын

You are very welcome! 💖

@WhiteFoxStopmotion 9 жыл бұрын

Wow! I literally can't believe how easy that was! Thank you for another fantastic tutorial. I am new to your channel, but I'm definitely subscribing! :)

@Artoveli 8 жыл бұрын

Great video, thank you for making it!

@tressinar 7 жыл бұрын

Thank you!!! so helpful.

@dragicazupancic6293 5 жыл бұрын

Thank you for sharing ☺

@monaabdelfatah4936 5 жыл бұрын

Amazing, thank you so much ❤

@dhyanadesai6622 3 жыл бұрын

So helpful!

@justinajohnson9723 9 жыл бұрын

Good tutorial, thanks!

@zaileyfernandez3009 7 жыл бұрын

oh I tried it amazing

@chilkakanika1456 3 жыл бұрын

Thank you so much for this

@donnar9864 Жыл бұрын

I just made my very first skinner blend with this teardrop method, I've put it off for a very long time but I finally did it and it turned out PERFECT ❤️

@PolymerClayTutor Жыл бұрын

YAY!! That's excellent to hear!

@donnar9864 Жыл бұрын

@@PolymerClayTutor You are an amazing teacher 😀

@kwokchuyuk4551 8 жыл бұрын

I love this

@ItsMissRii 9 жыл бұрын

Interested on how you blend colors and turn them into shapes such as round beads as I don't want my colors to become all one colour. Could you do a tutorial on this?? Love your videos! Hugely helpful for a beginner like myself!

@PolymerClayTutor 9 жыл бұрын

Riana Bell Thank you... I'll add your suggestion to the box!

@MelWatchesYT 9 жыл бұрын

Thanks so much! I was about to drop some money on a pasta machine but, now that I know I don't absolutely have to, I'm going to try this today!

@PolymerClayTutor 9 жыл бұрын

Melsy84 You may still want to get a pasta machine... once you have one, you'll wonder why you didn't get one sooner. I delayed for a long time and was kicking myself for waiting so long.

@Nemi-cp5nq 9 жыл бұрын

^ Same! Get one!

@jendragonfly 10 жыл бұрын

Super! Thanks again. I would love to see a tutorial with craft foil and polymer clay. :D

@briannamatthews6047 10 жыл бұрын

so cool👍

@Ikimification 10 жыл бұрын

Thanks for this tutorial on how to do it by hand. I had a hard time in visioning it until you actually showed us in your demonstration that is easier than we think, just a bit more time work, but not much. Love your channel Cindy, and love you as our hostess and teacher. I'd love to pop over a bout 15000kms east and have you teach me something in person someday, it is my dream. Hugs

@Ikimification 10 жыл бұрын

That should have said 1500 kms NOT 15000 kms!! We are NOT that far apart LOL that would take SOME driving! Lol

@PolymerClayTutor 10 жыл бұрын

Kimberly G I'd love to meet you too Kimberly! Maybe on a PcT Roadtrip sometime? Are you in Alberta? We might be going to Calgary this summer. Don't know yet though...

@larissaamurov7819 10 жыл бұрын

Thanks for this vídeo!

@chilkakanika1456 5 жыл бұрын

Thank you for this

@giuliageb9169 10 жыл бұрын

Thanks, I commented for this and I'm really happy you did it!! :)

@Yargo73 10 жыл бұрын

thanks for sharing! It could be even a way to make a cane for example when you need to use small quantities of clay or for simple caning by hand when pasta-machine in busy with other projects!

@kellyschmader213 5 жыл бұрын

This was exactly what I was looking for; thanks! :)

@PolymerClayTutor 5 жыл бұрын

You're welcome! 💖

@sheryldelaney4804 5 жыл бұрын

Thank you!

@Angelikasowul 8 жыл бұрын

Love the video :) Thank You

@Garcia9827 9 жыл бұрын

thank you very much.

@puckizzy 8 жыл бұрын

Thank you! I'm going to try a small bit this way for my first skinner blend, before I try putting in my pasta machine.

@PolymerClayTutor 8 жыл бұрын

Don't be too scared to just go for it. It is only clay. The worse than that can happen is that you have a new color to work with!

@puckizzy 8 жыл бұрын

Good point! And it worked! So excited. Door's wide open.....=)

@aurafox5184 7 жыл бұрын

PolymerClayTutor when I don't have a color I mix others

@cynthiajones3294 10 жыл бұрын

Thank you so much for that video..that was something that i needed to know...because i don't have a pasta machine..

@CalicoEyez65 10 жыл бұрын

Cindy, my favorite part of this technique is that you can use smaller amounts of clay! I have a pasta machine (with a motor) but sometimes a smaller quantity of clay is needed for a project. NO WASTE!!! Big giant YAY!! :)

@TheEMC99 10 жыл бұрын

Thanks! I don't have a machine and I don't think I can afford to buy one at the moment. A lot of the reviews for the more affordable one seems to hit both ends of the spectrum so I guess I'll need the more expensive ones at some point. This video was a great help. Thank you!

@jenniferahough4983 9 жыл бұрын

Erin Carter I have a really cheap basic pasta machine for my clay as I upgraded the one in my kitchen. But to be honest I've found they both work pretty much the same. Not found any problem with either of them. Try looking on ebay/amazon etc for a cheap 2nd hand one. Have fun whatever you're doing with clay :-)

@potasticpotato2968 9 жыл бұрын

thank you for this video

@melissalee3645 10 жыл бұрын

Thanks! This was so helpful! Before I was panicking that I didn't have a pasta machine.

@lilli4928 10 жыл бұрын

Think you!

@shiralichtman 8 жыл бұрын

I like your earrings!!

@sissi555706 10 жыл бұрын

Thanks a lot

@COLORPAPERPRINCESS 8 жыл бұрын

PolymerClayTutor so nice video! i will subscribe :)

@polymerclayinspired7248 6 жыл бұрын

Best way to do polymer clay skinner blends

@freshcreation1 2 жыл бұрын

Omg thank you so much !!!!!

@PolymerClayTutor 9 жыл бұрын

Hi +Sleeping Queen my acrylic rod is 25mm dia. And 25cm length.

@alexisbarrera3621 9 жыл бұрын

Thank you so much for this totorial it was really useful when I was 5 I started doing polymer clay and I was never able to figure out how to blend thanks

@bettifelon 7 жыл бұрын

Love the video, thank you so much! Also, what is the mat you're using there to roll them on?

@KraftyHours 10 жыл бұрын

Very useful

@CraftyMints 10 жыл бұрын

Well, YES YES YES, it was helpful!! I love the heart shape polymer clay creations in the back!!! Was it resin?????

@PolymerClayTutor 10 жыл бұрын

Hi Crafty Mints Good eye! The piece you saw was actually a sample heart from my Faux Batik Tutorial with a coating of Magic Glos UV Resin after it was baked. If you want to see more samples from that paid tutorial, watch this teaser: Polymer Clay Batik Technique (Intro)