Poor Thing | '75 Fender Champ Pt 1
Рет қаралды 8,331
27 күн бұрынSomeone was very unkind to this little fella.
- - - - - - - - - - - - - - - - -
These are things I get asked about a lot :
Amp Tech Gear Used :
Hakko FX-951 soldering station
Weller SPG 80L soldering iron (chassis work)
Rigol DS1054Z digital oscilloscope
Thsinde 18B+ digital multimeters
Kester 60/40 solder
Techspray #4 No-Clean Desoldering Braid
Below are things that make this channel possible that people don’t usually think about. If any of these companies want to send me new and wonderful toys, I’m open to that. I can’t take free stuff when it comes to the amps I review, etc, but for the stuff below, bribe away!
Microphones/Audio Equipment :
Guitar Amps : Royer R-10 Hot Rod and/or Shure SM57 (noted in videos)
Voiceover Bench : sE Audio sE8 (small diaphragm condenser)
Voiceover Streaming : Shure SM57 with shockmount and windscreen
Voiceover Mic Arms : Elgato Wave Mic arms
Guitar Mic Stand : Gator Frameworks short weighted base stand with boom
Mic Cables and Guitar Cables : Mogami/Neutrik
Mic pre : MOTU M2
DAW : Logic Pro II on MacBook Pro 16 running Sonoma 14.5
Plugins : No effects other than level matching/normalization unless a recording
specifically has reverb etc added in post (rare, various Waves plugins)
Monitors : Yamaha HS7s
Monitor Stands : Gator Frameworks Desktop Clamp-On Stands
Monitor Isolation Mounts : IsoAcoustics Iso-Puck Minis
Headphones : Beyerdynamic DT 770 Pro (main)
Headphones : Sony MDR-7506 (alternate)
Video Equipment :
Camera : Sony ZVE-10 with SmallRig Cage (main)
Lens : Sigma f2.8 18-50mm (main)
Lens : Sony ZVE10 kit lens (rarely used)
B Camera : Apple iPhone 13 Pro (rarely used)
Tripod : SmallRig 71” with SmallRig Fluid Video Head
Streaming Mount : Elgato Master Mount S with SmallRig Ballhead
Bench Light : SmallRig RC 120D
Bench Light Diffusor : SmallRig Lantern Softbox
Bench C-Stands (light and overhead camera) : Neewer Pro SS Heavy Duty
Streaming Light : SmallRig RC 120B
Streaming Diffusor : SmallRig Parabolic Softbox
Streaming Light Mount : SmallRig 148CM Wall Mount Boom with Triangle Base
Various Other Lights : Neewer LED Panels with Neewer Softboxes
Video Software :
Davinci Resolve 19
Phantom LUTs
Paul Leeming LUTs
Adobe Illustrator 28
Adobe Photoshop 25
Ecamm Live (streaming software)
@PsionicAudio 25 күн бұрын
Sorry, said they fused the neutral but they are switching the neutral (the other no-no).
@tjminasi1442 25 күн бұрын
Sadly, That’s how it was done back in the day
@mikewithers299 25 күн бұрын
That means all kinda parts are energized whenever that amp is plugged in, even when it's off. Not good.
@FuriousMess 25 күн бұрын
I have a similar vintage Champ that was refreshed about 6 years ago. You're right that little amp is a poor thing in comparison. Picked mine up about 35 years ago for $75.00, second best deal I ever got
@volesrock 25 күн бұрын
As far as those particle board inset baffles go I did have a totally thrashed SF Twin that I rebuilt. The cabinet was a mess (dropped down stairs most likely). I steamed the tolex seams back with a wet rag and a clothes iron exposing the non finger-jointed corner, and gave it one good smack with a hammer to separate the joint and remove the top. I then removed the particle board baffle with almost no effort as it was somewhat crumbly, and had almost no glue. I fit a decent piece of plywood into the dado that I'd cut for one 12 inch speaker. Used copious Tite Bond, and screwed and glued the top panel back on, and glued the tolex back down. I don't think a Vibro Champ would be worth doing all this to, but I'd built a single channel AB763 Reverb non trem, w a master volume and a bunch of other mods and it sounds killer. I'd like to think that getting rid of that crumbly, weakly bonded to the cabinet so-called baffle was part of it. Also put a custom 100 Watt Weber Silver Bell in it. Top marks, I'm a Weber believer now.
@larrychung3190 25 күн бұрын
Good soldering skills and experience are essential. You have to be 100% satisfied with each and every solder connection and know what that means, too. Thanks for sharing this initial inspection with us, looking forward to your restoration of a classic vintage Fender amp.
@chrisfit 25 күн бұрын
I really liked the sound through the shop cab.
@Satchmoeddie 25 күн бұрын
My new to me chassis soldering iron came from a thrift store. The brand name is "Sound Design Products". It was still in the taped up original box, the tip was kept very clean and it was very nicely & seemingly freshly tinned. With a name like "Sound Design Products" is had to be have been made for working on audio amplifiers, and someone really took exceptionally good care of it.
@sgt.grinch3299 25 күн бұрын
I give the person credit for thanking the customer for allowing him to learn on his behalf.
@mikewithers299 25 күн бұрын
I would have let that tech "experiment" on a less vintage amp. 🤣🤣
@richardlynch5632 25 күн бұрын
Hoping the owner is ALL IN...🤞🤞👍
@qua7771 25 күн бұрын
Shame to lose the vintage cabinet despite that it has a less than ideal build quality. Partical board cuts easily, and you could probably cut the baffle out with a router bit. I'd replace it with birch plywood mounted with cleats. I think that having a10" speaker is a good thing if the baffle can suport it.
@ElCentralScrutinizer 23 күн бұрын
Love the Norm Abrams reference (-2 for my poor spelling)
@tjminasi1442 25 күн бұрын
Great vid. Got a ‘69 champ all original that got a couple of tone caps, full ‘65 style rewiring, and plays great but for a bit of noise probably from eyelet power leakage to signal nodes. But your champ is definitely worth a bit of work to restore.
@goodun2974 25 күн бұрын
Lyle, if you do decide to reinforce the weakened particle board, don't use ordinary superglue, it's too thick; Titebond "waterthin" CA glue, formulated for woodworking, is a better choice. You might not find it at an ordinary hardware store but a woodworking supply company such as Woodcraft will usually stock it, or you can buy it online. Alternatively, "Hot Stuff", made by Satellite City, is another good waterthin CA glue, but it doesnt last as long in storage as the Titebond CA glues. Titebond makes a medium viscosity CA as well, but if you really want it to soak into the particle board then you should use the thin formulation.
@alanmcdonald6551 25 күн бұрын
Try weldbond. My favorite white glue. Even over titebond
@goodun2974 25 күн бұрын
@@alanmcdonald6551 , white and yellow wood glues are too thick to soak deeply into the particle board; if you dilute them with water the additional liquid will likely make the particle board fibers swell and expand. CA glue seems the most logical choice, but most ordinary superglue is too thick, which is why I suggest using a waterthin variety. CA cures very quickly in the presence of cellulose and so it won't make the particle board swell like a water-based glue would.
@alanmcdonald6551 24 күн бұрын
Been a million guitars with cracks etc fixed with diluted titebond
@captainfineweather5610 25 күн бұрын
Hi Lyle, I wish you a beautiful Pentecost!
@mickizzo 25 күн бұрын
The speaker bolts look like regular home cheapo machine screws. If so, you could replace them with the correct ones that have reverse wood threads near the head. Stew Mac has them in stock.
@Elraurko 24 күн бұрын
The eminence legend should have plenty of bottom end. They are great speakers, i have two of them in my blackface super.
@aorippedbandaid3711 25 күн бұрын
That hiss 🐍 in the voice
@MichaelSmith-rn1qw 24 күн бұрын
Weren't the upper and lower rear panels reversed? My 1979 VC came with 2 rectangular rear panels. Also mine had the rca speaker jack from the factory, until I recently installed a 1/4 inch. I know you are not set up for woodworking, but a new speaker baffle could be made with a perfectly round cut out using a router with a trammel attachment. My go-to for cutting speaker holes.
@ourlifeinwyoming4654 25 күн бұрын
Very fixable. Staying tuned for this one.
@BradsGuitarGarage 25 күн бұрын
...When a legend is not in fact a champion.
@ewetoobie 25 күн бұрын
Did they upgrade the speaker to a 10" size? new baffle board or just cut a bigger hole? ok, see that, rough cut a bigger hole & broke the bb in the process. Nice. =) I put a Jensen Alnico 8-Inch (P8R4) in my '76 Vibro Champ and it rocks!! Great tone, no need to butcher the cabinet.
@Blueguitar007 25 күн бұрын
My 8" weber vintage alnico has lots of bass too
@nate_vz 25 күн бұрын
Yes lots of good choices in the 8" size that punch above their weight class. Also recommend the Warehouse 8GC which I have in my 73 champ.
@tonyjohnson5735 25 күн бұрын
hecks yea, shout out to the legend Norm Abrams!
@shckltnebay 25 күн бұрын
I wanted a good quality plywood baffle for my 73 PR which needed the grill frame replaced anyway so I used the stock baffle as my cleats for a new baffle that bolts in where the grill frame originally sat by cutting down the baffle to 1" on each side. A lot of work with replacing the grill and mounting a new 12" speaker, which also allowed me to use a adaptor ring so i have a choice of a 10 or 12 and after paint a layman cant tell anything has been done.
@qua7771 25 күн бұрын
That's an excellent idea. Good thinking.
@shckltnebay 25 күн бұрын
@@qua7771 thanks after using similar hardware that a black face with use bolt wires and painting it flat black inside the baffle and using the correct real cloth I'm very happy with the results and I don't think I've taken away anything from the collectibility
@masonianbund 23 күн бұрын
And at 0:22 my knees shook and my heart quailed within me
@JuanLuna-ew3zo 25 күн бұрын
Off topic but Hello sir, I’m a new fan of yours. Love your videos on KZfaq. Your insight and knowledge is very helpful. I thank you. I know this is a long shot and I’m not sure if you will reply but I need help with deciding which amp. I have the option of buying one of 2 TopHat Royale Amps but I’m not sure which one to purchase. One of them has an effects loop and one doesn’t which leads me to believe the one that has the effects loop had it installed afterwords. The one with said effects loop is being sold out of a store and the one that doesn’t is being sold by a studio. The one with effects loop has a green Celestion g12-m and a Weber blue dog. The one without it has 2 g12c-30 speakers. I’m putting the link to the one selling out of the store and I attached photos of the one being sold out of the studio. Do you think it would be wise to the one that’s been at a studio since most likely it hasn’t been tinkered with? Any guidance would be very helpful.
@PsionicAudio 25 күн бұрын
Thanks! Get the one without the effects loop. Brian didn’t install it and you won’t know what you get.
@ToddRichmond 25 күн бұрын
I hate it when my baffle bulges. Belay the bituminous byproducts!
@wckoek 25 күн бұрын
I am thinking of buying an Ampex MX10 tube mixer adding direct out for the preamp. I wondered if you do this kind of mod or you deal exclusively with amps only?
@gremlinmachineshop 25 күн бұрын
They took that thang to the butcher shop for mods, gyat dang!
@victorbeebe8372 24 күн бұрын
Aloha Lyle! Did the tech really learned how to work on amps?
@almoreno8852 25 күн бұрын
If I wanted to change the can capacitor to three F&T caps which ones would you use? I’ve lost faith in the CE cans.
@PsionicAudio 25 күн бұрын
I’d use 30 30 22 F&Ts or 20 40 20 MODs for axials or 32 32 22 Nichicon radials (easy to attach to a terminal strip).
@will5150 25 күн бұрын
since you mentioned Norm, you'd be great on This Old House. The electronics expert.
@PsionicAudio 25 күн бұрын
I don’t look good in plaid.
@olddogguitars23 25 күн бұрын
New PBS show: This old amp
@mikewithers299 25 күн бұрын
@@PsionicAudio🤣🤣🤣
@mikewithers299 25 күн бұрын
@@olddogguitars23🤣🤣🤣
@mattjohnson6916 25 күн бұрын
"I enjoyed learning how to work on amps with this.... "😬 Would you want someone to say that before working on your vintage car? ..... Or your surgeon?
@Rico_G 25 күн бұрын
I believe that speaker is a 1028K. Good speaker when operating correctly.
@PsionicAudio 25 күн бұрын
Yeah, it’s weird. The only 1028K I can find with that sticker is at New Sensor and it’s out of stock. The 1028Ks everywhere else say Legend 1028k 35W and have the impedance listed. Was this a previous model? A cheaper version built in a different factory? Just a dud? Because I’ve used 1028Ks in Super Reverbs and this one doesn’t sound at all right.
@Rico_G 25 күн бұрын
@@PsionicAudio Looks like they changed the label at some point in time during production. I've had a couple over the years with that sticker and they were 8 ohm. I don't know if they were ever available in 4 ohm. Just my experience.
@burnsy55 25 күн бұрын
Thanks for the video - are those Nichicon caps really all that bad ? I’ve used them before and would probably tend to leave them in, but now also use the Vishay MAL series.
@PsionicAudio 25 күн бұрын
Those aren’t Nichicons. Poorly soldered generics.
@burnsy55 25 күн бұрын
@@PsionicAudio now I know, thank you
@gremlinmachineshop 25 күн бұрын
Is there proof of that logo being Nichicon? Every cap I've ever seen from them has the full lowercase word logo. I know the ones in this video are sold as Generic by CEdist (tubesandmore/AES). A guy I work with calls them Nichicons, also. I would think sellers wouldn't wanna call real Nichicons "generic"...truth is that I don't know the right answer. Never seen documentation or even google image confirming that logo. I always thought it was a U not an N.
@PsionicAudio 25 күн бұрын
These aren’t Nichicons. Nichicon hasn’t made axials in about 5 years and when they did they tended to be blue. And said Nichicon. I used hundreds of them - they were good caps.
@gremlinmachineshop 25 күн бұрын
@@PsionicAudio ty that's what I thought
@briansilcox5720 25 күн бұрын
New cab.
@fenderlead1 25 күн бұрын
Cutting out and replacing the baffle will be stupidly easy. The grill is on a frame Velcro to the baffle. If you don’t take into account the time for the paint to dry it’s less than an hour work.
@johnbravo7542 25 күн бұрын
@@fenderlead1 Dreamer!
@michaelinglis567 25 күн бұрын
I build my own amps, pedals and guitars when I can afford to so I absolutely understand the original owner wanting to learn a little and do some mods. But jumping into a tube amp for your first project is like a teenager with a learners permit deciding they are ready to race the Indy 500. It kills me that those guys don't even learn to properly solder before they unleash their plumbing soldering iron and acid core solder on these otherwise really nice instruments. It's just so foolish smh. Again, I was a beginner once so I understand the desire but when I was a beginner I started on my own circuits on vero/stripboard not fully functioning quality gear. And even when I did start to do mods with my amps and pedals I always had the rule to never remove functionality. I only add more so that if the amp, pedal or guitar ends up with someone else (or is borrowed etc) they will still have all the original functionality of the instrument with the OPTION for other sounds, configurations etc.
@huddyskiba1 25 күн бұрын
These ones are always kind of troubling to me. How much $$$ do you put into a 1975 Champ before you cry Mercy? From the sound of it the owner would be getting a new amp tho. 🤷🏻♂️
@PsionicAudio 25 күн бұрын
Yeah, easy to get upside down on. The cab/speaker issues are the really painful bits. The inside the chassis stuff is no biggie.
@lionscircle4700 25 күн бұрын
@@PsionicAudio If the owner decides to go with a new cabinet, why get an 8" speaker version? Chris Stapleton's Princeton model has a 12" speaker with more space to accommodate the larger size. Not sure if they sell a 12" modded cabinet for the champ. Maybe they did but its called a Musicman. It might look funny in its elongated form but at least there would be enough space to generate some bass from the champ circuit. I saw your video that proved that the 8" champ speaker is holding back the performance of the champ; lesson learned.
@PsionicAudio 25 күн бұрын
Just got off the phone with the owner. While Mojotone sells a (taller) cab for this that uses a 12” we’re going to go with the standard 1x8 version with a new 8” speaker. Our reasoning is he has a LOT of cabs so can easily run out of the Champ’s 1/4” speaker jack to any of those when needed, but it can still be “a little Champ” the rest of the time.
@huddyskiba1 25 күн бұрын
@@PsionicAudio great solution. Essentially a head with an internal speaker. Get the real /original thing and then a little extra when wanted/needed.
@goodun2974 25 күн бұрын
@@PsionicAudio, I'm curious if you have a favorite choice of 10" speaker for use in a relatively small cabinet that might tend to limit the performance of some 10" speakers.