Porsche 997 bumper removal and radiator cleaning DIY
Рет қаралды 20,288
4 жыл бұрынOne if the most over looked maintenance to dos on 911s is cleaning the radiators. Because of the way the radiators function on 911s they tend to pull in dirt and debris that can reduce their effectiveness. If you haven’t checked yours, you should. You might be surprised what you find in there!
Tool used:
19mm - amzn.to/2VnYV8L
Impact wrench - amzn.to/2Z7wo8w
T25 and T27 - amzn.to/3gevhuP
8mm socket - amzn.to/2YB4X7P
Shop vac - amzn.to/2NvkdwQ
Multi bit screwdriver - amzn.to/3i8Wvo2
If you have any questions just leave a comment below and we will do our best to answer!
Hit SUBSCRIBE and BELL button to make sure you don’t miss out on any of our new videos!
Please LIKE and SHARE.
Much love, KRT LYFE!
Thank you!
Our Minimalist Vlogging set up.
The best Tripod we have ever used.
amzn.to/3uOmVBK
You need this to make framing shots a breeze!
amzn.to/3yfk2vC
This Phone mount is LEGIT!
amzn.to/2QkuLUx
Great affordable lighting!
amzn.to/3ePtYEM
Our go to travel tripod!
amzn.to/2RQlt34
Convenient cold shoe mount.
amzn.to/3eM8loI
1072 W Peachtree St #78291, Atlanta, GA, 30357
Email: krtlyfe@gmail.com
Instagram: / krtlyfe
#996 #997 #KRTLYFE
@cjsnylons 3 жыл бұрын
That zip tie idea is brilliant.
@KRTLyfe 3 жыл бұрын
Thank you!
@y2ksierra 3 жыл бұрын
Zip tie is brilliant to get those clips out, thanks for the tip as I’ll be doing this soon!
@KRTLyfe 3 жыл бұрын
Glad it helped!
@TINDAL1000 3 жыл бұрын
Any idea how to put those fixing clips back in when reassembling the bumper? Do you simply slide them in?
@tokesa2753 4 ай бұрын
I really appreciate all of your DIY videos. Brought my car to a shop to install Eibach lowering springs and got charged $1700
@oibal60 10 ай бұрын
I've changed both ballast resistors (HVAC & oil cooler) on my 993. Moses smell the roses. Good job I've a lot of patience and small hands.
@ArturGrigio Жыл бұрын
Oh man, it’s so sweet watching this video, cause you know that this car was his dream, not hers. No woman would go for a 997 NA 911 😅 But, she got the camera, and is ready to go. That’s a “ride or die” you got there bro!
@tamagocheesesandwich5955 Жыл бұрын
Great video thank you for capturing it in such a straightforward way. You’ve given me confidence that I try it myself!I do wonder what’s up in my radiators!
@vintagewoodshop2978 3 жыл бұрын
Thanks for the vid! Just pulled my front bumper to clean the radiators and install grill mesh ($3 from HD and some time with tin snips and a hammer). I’m really digging the car - it’s new to me and my first Porsche. 2005 997 2CS. Really enjoy your vids! 👍
@KRTLyfe 3 жыл бұрын
Glad I could help, hopefully you have some awesome adventures with your new ride!
@tuck1760 Жыл бұрын
appreciate you taking the time to make that video! very helpful for me!
@KRTLyfe Жыл бұрын
Glad it was helpful! Thanks for watching commenting and subscribing!
@richardcedrone6968 4 жыл бұрын
Nice job, thanks for sharing!!!
@KRTLyfe 4 жыл бұрын
Thanks for watching!
@michaelbuglerstudio 3 жыл бұрын
Nice job! Getting ready to tackle this job soon!
@KRTLyfe 3 жыл бұрын
You can do it! Good luck!
@tond2006 4 жыл бұрын
Nice job, nice video, thanks! Keep it up.
@KRTLyfe 4 жыл бұрын
Thanks, will do!
@robertjay1179 3 жыл бұрын
That is still a lot of crap behind the radiator. Once a year sounds good. Thank you, KRT!
@KRTLyfe 3 жыл бұрын
No problem glad you found this information helpful!
@bbltd.3154 3 жыл бұрын
I was like no way dey dey got a car channel. I say that with all the love in the world. Good video as well! Keep them coming.
@KRTLyfe 3 жыл бұрын
Thank you! Will do!
@Nowherenotime 3 жыл бұрын
Good Job Next time you might go to a HVAC shop and get some condenser coil cleaner and soak your rads with it . Let it sit and flush with water in the reverse direction of air flow . Thant will clear the mud and road slop that has built up furring time.
@KRTLyfe 3 жыл бұрын
Thanks for the tip!
@JuanCarlosChinoLoco 4 жыл бұрын
Good work man! I’m also in Atlanta so I’ll be looking out for you guys on the street. Also proud owner of a GX470.
@KRTLyfe 4 жыл бұрын
Sounds good! Thank you for watching!
@jimsego172 3 жыл бұрын
Great video with clear instructions.I'm researching this job because my Cayman washer fluid lines are leaking.
@KRTLyfe 3 жыл бұрын
Thank you, hopefully this video helps you out!
@aboyandhisdog 2 жыл бұрын
Outstanding! I'm launching in to this job very soon and really appreciate your video. I'd be clueless without YT!
@KRTLyfe Жыл бұрын
Glad it was helpful! take your time and you can knock this out!
@aboyandhisdog Жыл бұрын
@@KRTLyfe I had a time lining up the screws in the bottom (underneath) the bumper after I had made the attachments up top with the spring clips. In hindsight, I should not have put in the spring clips before getting all of the screws in.
@pjay3028 3 жыл бұрын
Excellent video, thanks.
@KRTLyfe 3 жыл бұрын
Thank you.
@pjay3028 3 жыл бұрын
@@KRTLyfe could you remove the bumper without taking the side marker lights out once you have disconnected the lighting wiring loom or do the side markers connect to a different loom? Thanks
@MaskOFF90 4 жыл бұрын
KEEP iT Up bro Good Work (Y)
@KRTLyfe 4 жыл бұрын
Thanks ✌and thank you for watching!
@chiodeguate1 2 жыл бұрын
Great video. I've also used condensed canned air from the back to clear out the clogged fins.
@KRTLyfe 2 жыл бұрын
That's a great idea!
@sutherlacd27 Жыл бұрын
I've done the same but after removing the front bumper I found that I can only get so much cleaned out with the bumper on.
@stevelee9707 3 жыл бұрын
I used the leaf blower
@KRTLyfe 3 жыл бұрын
Nice!
@johncastle4404 4 жыл бұрын
I have watched many other DiY videos but I like your style and attention to detail...good job
@KRTLyfe 4 жыл бұрын
Thanks so much 😊. We appreciate it!
@mirekmtl 4 жыл бұрын
Mike PECHOUSEK......thank you sooooo much man…how weird, was working on side light, wire disappeared underneath and behind panel, wasn’t same as other side…and your removal of plastic wheel quard helped me find/fix wire/light in an instant. And we actually had a torx lying around (1 of like 5 or six by total chance) and it fit....go figure. You made my day👍👍. Like your style👍
@mirekmtl 4 жыл бұрын
Just saw the style mentioned above…and hadn’t before I wrote my comment, Hollywood!!
@KRTLyfe 4 жыл бұрын
mirekmtl thank you we make these videos to do our part to help people solve problems and save time! I used to get all my information from the online forums back in the day. They are great resources but when you can see what I’m doing I feel like it helps people like my self a little better! Thank you for the kind words, watching and commenting
@paulbartolini6363 2 жыл бұрын
Great video you saved my ass.
@KRTLyfe 2 жыл бұрын
No problem glad you found the video helpful!
@timd567 3 жыл бұрын
Thanx bruh
@KRTLyfe 3 жыл бұрын
No problem Thanks for watching and commenting!
@timd567 3 жыл бұрын
And the zip tie was very intuitive
@KRTLyfe 3 жыл бұрын
Thank you again !
@MrCleanPhoto 7 күн бұрын
The headlight harness - no one shows how to undo that 😂. Still fighting mine
@user-qn6yt3zx3w 4 жыл бұрын
Nice music!
@KRTLyfe 4 жыл бұрын
Glad you like it!
@sutherlacd27 Жыл бұрын
Replace those orange side indicators with clear ones from Suncoast. They are dirt cheap.
@Edgy01 2 жыл бұрын
Thanks for the tips! I have never dug into mine on my 06 S but it’s time to do some horn work and this is a step toward that as well. Considering also putting in grills to reduce the leaf entry. Ever thought about adding those?
@KRTLyfe 2 жыл бұрын
I actually thought about adding grills, I have seen a few people do it. I never got around to it myself. While you have that bumper off that would be the perfect time tho! Thank you for watching commenting and subscribing.
@Edgy01 2 жыл бұрын
@@KRTLyfe I finally got around to putting things back together. I did end up adding grills. I used a metal material for my grills, which keep their shape and thus need few zip ties to keep it in position (I only had to use 3 on each side). I went ahead and made a template from the piece(s) that are physically pressing onto the bumper cover. I made one template and merely turned it over to use it for the other side. I used tin snips to shape it.
@johnshuff953 3 жыл бұрын
Have you thought about adding the Rennline grill screens? I just bought a 2005 997 and am probably going to add them in the next few months.
@KRTLyfe 3 жыл бұрын
Yes, our possibly fabricating my own.
@rodcoulter997 3 жыл бұрын
Great camera work..too. Excellent. Do you work in a shop? How’d you learn “the little things” with these cars?
@KRTLyfe 3 жыл бұрын
I been wrenching since I was about 12. I started on Go karts and then cars.
@pixgaming6911 3 жыл бұрын
THATS A DAMN IMPACT DRILL
@steveadams548 3 жыл бұрын
Did you notice any temperature difference after cleaning the radiators? Great video.
@KRTLyfe 3 жыл бұрын
Not on my 997 but it made a big difference on my 996. The 996 radiators were almost 70 percent blocked tho.
@theblueeyeddevil7461 2 жыл бұрын
9:00 how do you disconnect it though? 😅
@edthayres9175 3 жыл бұрын
Excellent video, thank you for doing this for all of the 996/997 DIY owners out there. Have you replaced the fans behind the radiators? How difficult is that job to do?
@KRTLyfe 3 жыл бұрын
We are glad you found this video helpful! That means a lot to us. I have changed the fans before on my 996. It is a very similar process in fact I think I made a vlog about it. Let me find it.
@KRTLyfe 3 жыл бұрын
kzfaq.info/get/bejne/iryAjcd4zs_bZGQ.html
@edthayres9175 3 жыл бұрын
@@KRTLyfe Thank you for taking the time. Unfortunately this VLOG doesn't show replacing the fan/s. I pulled my bumper off and cleaned my radiators. When you did replace the fan/s do you remember what brand you replaced it with?
@KRTLyfe 3 жыл бұрын
@@edthayres9175 Hey at 7 minutes I show how to take the Fan off. I didn’t do a deep dive into it but that along with the the rest of the information in that VLOG should give you a good deal /understanding on how its done. When I did my fans I went aftermarket and I had 3 aftermarket fans fail which is why I did the Fan resistor mod. You can skip all this headache more than likely by going with the OEM Porsche fans.
@KRTLyfe 3 жыл бұрын
@@edthayres9175 Actually if you start at 6:55 and watch until around the 10:00 minute mark that is all about taking the fan off.
@aetrole4060 4 жыл бұрын
How difficult was it to put the clips back in? I might try it this weekend.
@KRTLyfe 4 жыл бұрын
Putting them back wasn’t bad getting them out was the hard part.
@CJ.A-C 3 жыл бұрын
well produced movie camera girl no shakes must never drink lol i read it wrong i have a 987 bit different but very well done cj from Wales uk .you must sleep at night now trump as gone lol
@KRTLyfe 3 жыл бұрын
Hahahahaha! Yep 🤣🤣🤣
@koihoshi 3 жыл бұрын
This honestly didn't look too bad to do. Great tutorial man.
@KRTLyfe 3 жыл бұрын
I appreciate it! Thanks for watching.
@lookgoodhealthy 3 жыл бұрын
if i need to replace the fan do i still need to remove the bumper?
@KRTLyfe 3 жыл бұрын
On my 996 I did it with and with out the bumper on. IMHO it’s easier to just take the bumper off.
@lookgoodhealthy 3 жыл бұрын
@@KRTLyfe in yr video u clean the back of the radiator but didnt remove it , for sure i would need to remove the radiator to get to the fan is this the proper way of replacing the fan ? please advise i appreciate your help
Fabiosa Animated
Рет қаралды 8 МЛН
The Automotive Fanatic
Рет қаралды 35 М.
TheThrottleCable
Рет қаралды 10 М.
Roaring Tigers Garage
Рет қаралды 50 М.
Анастасия Адаева
Рет қаралды 12 МЛН
Мотомалышка Алина
Рет қаралды 7 МЛН
Дураки на дороге
Рет қаралды 3,7 МЛН
Cute_rahul915
Рет қаралды 63 МЛН