Porsche Cayenne 958 Power Rear Door Window Shade gear failure and fix

Рет қаралды 9,461

3 жыл бұрын

Porsche Cayenne 958 Power Rear Door Window Shade gear failure and fix
More details at the DIY+ below
www.revogarage.com/porsche-ca...

Пікірлер: 17

@mattharvey1397 2 жыл бұрын

Thank you for this video and link for more details. It was incredibly helpful to me and getting my rear door back in action. Thanks Again!!!

@revolvinggarage380 2 жыл бұрын

Thanks Matt! Congrats on completing the project, it is a true PITA.

@EatLotsOfCurry 2 жыл бұрын

Almost missed there was a write up in the description. Wish the video provided a walk though.

@revolvinggarage380 2 жыл бұрын

The DIY linked from my article has a pretty good walk through. The article I created was meant to by sort of an overlay - the little things that the DIY missed that I found helpful when tackling the second window shade. Good luck!

@mikeburden1575 8 ай бұрын

Do you just have to remove one panel or both how long it take you

@EatLotsOfCurry 2 жыл бұрын

I got the dealer to disable the sunshades via programming.

@revolvinggarage380 2 жыл бұрын

That's amazing. I checked the Rennlist "ultimate coding" thread on the 958s to see if anyone had done it yet, but couldn't find a great answer. As these cars age, I would much prefer the window shades couldn't be activated.

@EatLotsOfCurry 2 жыл бұрын

@@revolvinggarage380 I was preparing to repair it but my SA mentioned they had the ability to do so. The programming is for the pair, you cannot disable individually which didn’t matter to me.

@revolvinggarage380 2 жыл бұрын

@@EatLotsOfCurry That makes total sense as most Cayennes didn’t have this feature. Well done!

@JSROOKS 2 жыл бұрын

Well, I have no idea what you just did. Explaining would be helpful I think...

@revolvinggarage380 2 жыл бұрын

Did you read the linked article? What are you having trouble with on the project?

@rizzler892 3 жыл бұрын

How do you calibrate the shade after you replace the gear?

@revolvinggarage380 3 жыл бұрын

The DIY referenced in the article covers this. Simply, if the shade needs calibration, hold the switch up. Once the shade is at the target height click the window switch down to stop it.

@sassanhenryakhondi2816 2 жыл бұрын

I still cannot figure out what the piece you are referring to that you removed with the needle noise pliers to release the metal rod. Please help. Thank you

@revolvinggarage380 2 жыл бұрын

There is a small plastic tube that acts as a guide for the rod that lowers and raises the screen.