Thank you!

Thanks! It was good to meet you. 72!

Thanks Carlos!

Thanks!

Hello AA3K! I also have one of these kits to build. I bought this one assembled 😉. 73 - AA4K

Thanks Kevin. I’m honored that you watched. I’ve learned a lot from you in your videos. You can contact Adam K6ARK for info on the paddles and the efhw kit at www.k6ark.com/

You’re welcome Dave. Thanks for watching!

Thank you! It’s fun to play with and build kits.

Have you gotten your license yet? It is a fascinating hobby. The radio isn’t custom though. The battery pack is just stuck on with double sided tape. Nothing fancy.

@@thekhakihat3233 I'll get my license eventually. Yes, it's a fun and fascinating hobby, and can also be useful in emergencies.

Thanks!

Have you gotten one yet? They are handy to have in the bag for an EDC radio.

The pouch is one I purchased from a friend several years ago, and I don’t see the exact same one on the maxpedition website. The M1 waistepack appears to be the most similar. www.maxpedition.com/collections/pouches/products/m-1-waistpack

I think that particular one was the anemone. As shown, it's perfect for this neat kit, and of course it's discontinued like all the good stuff. They make one similar called the pup that's very similar, but has Velcro instead of the buckle. There's plenty of similar models by other manufacturers. Blue falcon makes one really close.

Thanks!

Thanks!

Great video! I'm going with an 8 cell "AA" battery holder, and into an LDG QRP autotuner... Of course, it won't fit into that small a case! 73 DE W8LV BILL

Thanks! It was just an impromptu video. I hadn’t planned what to say, so I said nothing. 🤫

Just fwiw… I just did my first cw pota activation with this rig. It was working fine when I ended. When I got the radio out the next morning it will not transmit. Not sure what’s going on yet.

@@thekhakihat3233 Oh no! I hope you get your radio back on the air soon.

Update... its working fine now. I think I may have had it in usb mode or something stupid like that.

I was thinking if the combined 14,8v might be a bit high for the finals of this trx? Could you share some more experience if the radio is holding up fine when running it with the 4xbattery pack? tnx es vy 73 de Leo DL2COM

@@leobismarck My final decision was to buy a TR-25, and I use a TalentCell 12V 3Ah battery.

The antenna is an end fed half wave. No coax. The matching unit attaches directly to the radio. I just spread the wire out on the ground first, then tied one end to a branch. Then I draped the wire over some low branches back to the radio. It was certainly nvis.

Hello Anton. That is a prototype paddle developed by Adam K6ARK. They are similar to the pico palm design. I think he has finished his design and sold some to friends, but I haven’t seen them for sale on his website. Perhaps you can email him directly to see if he has any available. Thanks for watching.

You can contact Adam directly for more info on the paddles via www.k6ark.com/

I don’t. This is the K6ARK antenna kit… he has a video where he shows how to build it. Thanks for watching.

Thanks for the reply. Did you get the QRP or 20w Kit?

@@SMB_SpeedTwin it was the 10w/qrp kit

What power supply are you using? Is that the DL1DN designed option? I fitted the DL2MAN one yesterday and it’s just too bulky takes away from the ease of pack up and transport.

The battery holder shown here is a 4 x 14500 cell stuck to the end of the trusdx with double sided foam mounting tape. It covers up the PA and USB ports, which I never use. It provides about 16v to the radio which makes some people uncomfortable. Now I mostly use 3 x 18650 cell holders secured to the back of the radio with heavy duty Velcro. I detach the battery to pack up the radio.

Thanks. I’ll try to make some more videos sometime.

Hello soul candy. I believe I have been able to contact France from a SOTA summit in Virginia on 20m cw. It is a very capable rig. I usually pursue more regional contacts on 40m though. I have done multiple POTA and SOTA activations with this rig on voice and cw. It’s not fancy, but it works. 73 - AA4K

Thanks Stephane. At the time of recording this video my impression was that the antenna was fairly reliable so I didn’t always checked swr before transmitting. I have had a few problems with it lately, so I do check it routinely now. I usually get swr less than 1.5:1 depending on how I set up the antenna. Usually just varying the height of the matching unit above the ground has a significant effect on swr.

Thanks a lot for your quick answer. Best 73 from France.😀

The batteries are 14500 Li ion. They’re the same size as AA, but 3.7v each cell. m.aliexpress.com/item/2255800381480360.html?browser_id=270a8a5249944e31841435696d8e6d0f&pvid=85d255bd-1fb2-4bef-b039-2e0a9c6df801&_t=gps-id%3ApcStoreJustForYou%2Cscm-url%3A1007.23125.271119.0%2Cpvid%3A85d255bd-1fb2-4bef-b039-2e0a9c6df801&aff_platform=msite&pdp_ext_f=%7B%22sku_id%22%3A%2210000003067230957%22%2C%22ship_from%22%3A%22%22%7D&aff_trace_key=f9265d644ad549a39b5e600a35e5d453-1650825942709-04402-UneMJZVf&gps-id=pcStoreJustForYou&scm=1007.23125.271119.0&scm-url=1007.23125.271119.0&scm_id=1007.23125.271119.0&is_c=N&spm=a2g0n.store_m_home.smartJustForYou_832483681.0&gatewayAdapt=Pc2Msite4itemAdapt

Lately this has been my go-to radio because of its simplicity and the fact that I can/do carry it when I wouldn’t carry other radios. It’s not a Ferrari… more of a yugo… but it still gets you across town.

And what is the battery cage for 14500? How it attaches to the transceiver?

Gracias!

Yes, this is a 4s li ion battery. The radio will work with this voltage as long as the antenna has a low swr. I have since changed to a 3s battery to give me more wiggle room. Thanks for watching.

Funny! Thanks for watching. 73!

This particular bag is obsolete, but maxpedition still makes some similar ones. One viewer said it looks like the anemone. I thought it looks like the current M1 waistpack. Thanks for watching! 72 AA4K

I got mine from Aliexpress. You can purchase a kit and build it yourself, or already assembled like I did. US $80.99 9％ Off | (tr)uSDX usdx transceiver 5-band Multimode QRP Kits and assembled with case by PE1NNZ and DL2MAN a.aliexpress.com/_mKkn6ti

@@thekhakihat3233 I need to purchase Tecsun PL-365 first

@@thekhakihat3233 I wanted Sony ICS-80PRO but that vintage item costs 1000$+

A shortwave radio for listening is not terribly expensive… but you get what you pay for. There are several online resources for learning Morse code (CW). I am using LCWO.net. There are also phone apps. A local radio club may also help.

@@thekhakihat3233 thanks for the information I'll look into phone apps

I will have to defer that question to the designer, Adam K6ARK. I will forward him the question. It is a nice little key. Thanks for watching.

Adam said you can contact him directly via www.k6ark.com/

Not from K6ARK, but CW Morse has a tiny straight key that I also have and I like it. cwmorse.us/products/red-nano-qrp-morse-code-key

K6ARK has developed several miniaturized components for qrp radios, including the paddles and antennas shown in this video. He has also developed a tiny microphone kit that he sells on amazon. It is a fantastic little mic. K6ARK Mini Microphone Kit a.co/d/04txAy7

@@thekhakihat3233 Hello! Thanks for the info. Please tell me gyalyaltn microphone from Baofeng Uv5r ?

@@traveladventure427 I’m not familiar with the term “gyalyaltn”…. Manuel DL2MAN does have a build video using a baofeng microphone for the trusdx.

@@thekhakihat3233

@@thekhakihat3233 ok thank you

Exactly!

I bought a pre-built unit (not the kit) from aliexpress and I think it was about $140. This included the case. The K6ARK antenna kit was $20 on Amazon.

K6ARK retractable paddle. Similar to the Palm Pico. But I don’t see them on his site now or in his printables collection. Perhaps you can contact him to see if he has any available. He’s a very nice guy. He also made these: www.printables.com/model/332611-morse-code-paddle-cw-key

You are the 2nd person to say the exact same person provided it lol.

Just email K6ARK. He will probably send you one. Adam is a nice guy.

It is roughly 65 feet or 20 meters. It is an end fed half wave antenna cut for the 40m band.

Yes, it has a built in mic. Or you can plug in an external mic. Thanks for watching.

Thanks!

She must have loved you very much 😂

You are right about the unpleasant background noise of the freeway. Unfortunately that is my backyard.

.--- .- -. -.- . .-.