No video

Ported box build for 4-15" Sundown E Series subs.

  Рет қаралды 86,835

210 / Designs

210 / Designs

Күн бұрын

Customer did not want the box wrapped in fabric. Fits a 1999 Tahoe.

Пікірлер: 270
@ungeniusnba3565
@ungeniusnba3565 Жыл бұрын
Just did this build 9 years later man! Only I doubled everywhere. Thx I appreciated a video as a guide
@210Designs
@210Designs Жыл бұрын
Hell yea 🙌🏽🙌🏽🙌🏽🙌🏽 Glad to hear that man. And doubling everything, I know it’s solid as a safe!
@ungeniusnba3565
@ungeniusnba3565 Жыл бұрын
@@210Designs it's heavyyyyy tho😂
@210Designs
@210Designs Жыл бұрын
@@ungeniusnba3565 I know that’s right 🤣🤣🤣
@jamestinsley149
@jamestinsley149 3 жыл бұрын
I just completed this build using four Qpower super deluxe 15 and a 4k audiopipe and when I tell you that it punches 👊 the clock and goes to work MAN IT'S POUNDING 💪thank you for sharing your video and cut sheet info for the box
@210Designs
@210Designs 3 жыл бұрын
You are more than welcome bro! So glad to hear everything worked out for ya, on your build. I am a big Q power fan myself. Great subs and the super deluxe have the orange stitching, right? I'm subscribed, so I'll be on the lookout, if you post any vids bro!
@jamestinsley149
@jamestinsley149 3 жыл бұрын
@@210Designs yes they are the orange ones is there anyway I can add vid to your thread
@210Designs
@210Designs 3 жыл бұрын
James Tinsley - Cool, my cousin had a pair of 10” in a box a built for him, a while back. Very impressive. Not real sure on the link thing man. Give it a try 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽
@brotharobmusic
@brotharobmusic 5 жыл бұрын
You're a very clean and neat builder!!! Love how your screws line up!!! I'm so old fashion when I used to build, I would used liquid nails and I didn't used speaker terminals lol, I drilled a hole and ran my wire thru, then used liquid nails to clog it. Dope video glad I subscribed to your channel!!!
@210Designs
@210Designs 5 жыл бұрын
BrothaRobMusic - That’s what’s up man, thank you for the comment and the subscribe. I’m old school as well. We use to do the same thing. Liquid nail on everything. Believe it or not customer still has this box playing. Be sure and check out some of my newer builds. I’ve gotten a little better with time 😎 IG @210.designs
@GodIsGood1991
@GodIsGood1991 3 жыл бұрын
BROOOOO THANKS FOR THE SPECS! I WON 2 COMPETITIONS ALREADY WITH THIS BOX! THANK YOU BRO! 💯💪🏼🔊 I'm hitting 152+ db only clamping 4303 watts! Everyone ask me about the box & I send them to your channel lol 😆! Thank you bro seriously! God bless big homie!
@210Designs
@210Designs 3 жыл бұрын
WHAT?!?!? No way homie....congrats 🤝👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽 That is so awesome your out there putting it down bro. Glad to see you growing as well as your building. You stay after it and if you ever need anything, hit me up 💯 And thank you for letting me know how it’s going as well as all the support!
@betomorales5351
@betomorales5351 Жыл бұрын
does anyone still have the specs for this box i want one for my yukon xl
@kingfinesse9326
@kingfinesse9326 10 ай бұрын
Is this a 4th or 6th order build??
@robertdockery1681
@robertdockery1681 3 ай бұрын
Can someone point me in the right direction for a 4 15' box for my truck!?!
@jamestinsley149
@jamestinsley149 2 жыл бұрын
I build this box a year ago and it's the truth but I will recommend using Birch wood instead of MDF
@210Designs
@210Designs 2 жыл бұрын
That’s what’s up man 🤙🏽 glad it tuned out nice for ya. Yea, some folks do like using birch in the builds. To each is on material preference, but definitely 3/4” no matter what they choose 👌🏽I’m an old schooler, so I will always be a mdf guy. Besides, 99% of my builds get wrapped in fabric.
@glennmyers1769
@glennmyers1769 11 ай бұрын
Can you add any sundown 15s in this box I have this box with some skar ddx and wanting to do sundowns
@210Designs
@210Designs 9 ай бұрын
⁠@@glennmyers1769This enclosure was designed for the E series sundowns. I’d compare specs to the other models to make sure they are pretty close 🤙🏽
@tiffanychanceyboyd4734
@tiffanychanceyboyd4734 9 жыл бұрын
Glad my box was the kick off to more business bro...lol and good looking out bro for real you did your thang on the box foreal. Finally bout to drop all the sub's in. Can't wait to feel the air....
@210Designs
@210Designs 9 жыл бұрын
That's wats up bro!!! When you get all of them in, you gotta let me hear it. Glad your enjoying it!
@210Designs
@210Designs 10 жыл бұрын
Thanks bro. It's a beast! This was the first time building one of this size and it turned out great. The song "Coughee Brothaz-On tha Road". Thanks for watching.
@jaime13huerta
@jaime13huerta 4 жыл бұрын
What router did you use in this video??
@anthonycarter8685
@anthonycarter8685 3 жыл бұрын
Yo brah. You got a contact? Or email
@210Designs
@210Designs 3 жыл бұрын
@@jaime13huerta Porter cable router
@210Designs
@210Designs 3 жыл бұрын
@@anthonycarter8685 bj.hammon@yahoo.com
@robertdockery1681
@robertdockery1681 3 ай бұрын
Need one of these for a 2011 Tahoe plus my third row been removed.
@210Designs
@210Designs 3 ай бұрын
It was a great sounding build. Customer had it for years, before he finally sold it.
@210Designs
@210Designs 9 жыл бұрын
@Jimmi Brown-picked it up on Amazon. Jasper 200J Model 200 Circle Cutting Jig for Plunge Router
@basslover8073
@basslover8073 3 жыл бұрын
I swear bro this is the best video and song ever bro 😂
@210Designs
@210Designs 3 жыл бұрын
😆 thanks man! That’s still my jam. Customer had this box over five years, before letting it go. Got rid of his Tahoe. Kept the subs and still running them. Three in his his wife’s 2 door caprice.
@suchalif
@suchalif 3 жыл бұрын
@@210Designs Did he ever meter it?I'm curious...
@210Designs
@210Designs 3 жыл бұрын
@@suchalif Unfortunately not. Most of my customers aren’t into that side of it. Over here we meter by “hot boxing”. Doors closed, windows rolled up and music playing. Then see how long you can sit inside, before you have to open the door 😆 because you can breathe. Here’s a link to a vid of it playing. At this time, he only had 3 subs in it and a using a temporary amp. kzfaq.info/get/bejne/f7iZdNKntb7Ucmw.html
@MrBodean2010
@MrBodean2010 9 жыл бұрын
Man nice box. Love that port. Big port area = loud
@210Designs
@210Designs 9 жыл бұрын
Thanks man! This was my first build of this size. Never got a chance to hear it, but I hear about it from people who have. Business has picked up!
@MrBodean2010
@MrBodean2010 9 жыл бұрын
Bj Hammon that's good bro. If u want to get loud and move alot of air. Big port means alot. I learned that from some old school box builders
@mitzinaku834
@mitzinaku834 3 жыл бұрын
Is that the Dude☺
@210Designs
@210Designs 3 жыл бұрын
Yessir! Coughee Brothaz : On The Road
@jerryrivera7704
@jerryrivera7704 3 жыл бұрын
This is what I'ma do but I'ma use two rug boxes and just connect them together..they should bump good using u're same setup port in the middle.
@210Designs
@210Designs 3 жыл бұрын
Let me know it turns out 👌🏽
@jesusfavela3434
@jesusfavela3434 5 жыл бұрын
Your bracing shoulda been on the corners in 45 degrees to help air flow smooth.
@210Designs
@210Designs 5 жыл бұрын
Jesus Favela - Yea, that woulda helped out. This was an old build for me, I’m doing that now on my current boxes 👌🏾 Customer still has this one tho and still beating out of control.
@robertchristopher8898
@robertchristopher8898 4 жыл бұрын
I need on built 43"L 44"W 22"H tuned to 32hz vxf skar 15"d4
@robertchristopher8898
@robertchristopher8898 4 жыл бұрын
@@210Designs wht would tht cost me I want birch wood.with round port rear
@210Designs
@210Designs 4 жыл бұрын
Robert Christopher - With me, when you talk birch, my prices triple 😆😆 Unfortunately, I only build in my area bro. I do this on the side right now.
@robertchristopher8898
@robertchristopher8898 4 жыл бұрын
@@210Designs ohok
@chrisrelite5205
@chrisrelite5205 8 жыл бұрын
ok cool I hope they are or pretty close
@210Designs
@210Designs 9 жыл бұрын
Short vid of this box playing, in the customers ride. Currently running 3 of the 4 subs, being pushed by a Planet Audio BB2500.1 kzfaq.info/get/bejne/f7iZdNKntb7Ucmw.html
@mpulford311
@mpulford311 7 жыл бұрын
Bj Hammon If you have email can I contact you with help on this type of sub box for a Chevy trailblazer.
@frankmackii904
@frankmackii904 6 жыл бұрын
Nice Box
@210Designs
@210Designs 6 жыл бұрын
Frank Mack II - Thanks man. He’s still bumping the same box with the same sundown e series subs today 💯
@frankmackii904
@frankmackii904 6 жыл бұрын
210 / Designs u welcome. Wow that's amazing
@210Designs
@210Designs 6 жыл бұрын
Frank Mack II - Here’s a link to video he posted a while back. He only had three in at the time. Running off a single Planet Audio 2500.1 kzfaq.info/get/bejne/f7iZdNKntb7Ucmw.html
@jackiedenton650
@jackiedenton650 4 жыл бұрын
Awesome build is that u.g.k playing?
@210Designs
@210Designs 4 жыл бұрын
Jackie Denton - Thanks bro! It’s actually Coughee Brothaz feat. Devin the Dude - On the Road
@AyeYoStony321
@AyeYoStony321 2 жыл бұрын
What's the cutting specs
@southsidemikevlogs
@southsidemikevlogs 6 жыл бұрын
I need a box for 4 12s for a 2005 gmc envoy SLT but needs to be a ported box for 4 12 skar audio evl 2500 watt max 1250 rms watt
@robfalkner4303
@robfalkner4303 10 ай бұрын
If you had rounded the port edges it wouldn’t rolled out smoother
@210Designs
@210Designs 10 ай бұрын
Okay…🤷🏽‍♂️
@thebull5886
@thebull5886 7 жыл бұрын
I need a box just like this one to in my 01 Tahoe . how much would you change me..... I have for skar 15 inch sub
@GodIsGood1991
@GodIsGood1991 3 жыл бұрын
Bro I really built this box! I did it just like how you did. Even spayed it on the inside like you did lol. But how did it sound? I haven't tested mines yet and do you think I should face the port Foward or towards the trunk of my Ford Expedition?
@GodIsGood1991
@GodIsGood1991 3 жыл бұрын
THANKS FOR THE DIMENSIONS TOO I REALLY APPRECIATE YOUR WISDOM HAHA
@210Designs
@210Designs 3 жыл бұрын
That’s awesome man 🙌🏽🙌🏽🙌🏽 Glad to hear that. I’ve had several people build this enclosure and was very happy with the performance. Customer faced his port to the rear of the suv (towards the back hatch). Using it as a loading wall 👌🏾
@GodIsGood1991
@GodIsGood1991 3 жыл бұрын
@@210Designs ok cool Im getting ready to put it in today. Thank you bro I really do appreciate you bro! God bless! 💪👍💯
@210Designs
@210Designs 3 жыл бұрын
@@GodIsGood1991 - Like wise bro 🙏🏽 Hope you have fun with it. And post vids/pics of you can 💯
@GodIsGood1991
@GodIsGood1991 3 жыл бұрын
@@210Designs Okay cool I'll post em and let you know so you can see it. It super slap bro. I got 4 15s wired to 2ohms with a Taramps hd3000. I'll let you know when its posted bro. Thanks again.
@mikebaker9313
@mikebaker9313 6 жыл бұрын
Bj I got a question when you glued and clamped it together did you go ahead and drill the holes then srewed them in and do I leave clamps on while I drill and screw the holes
@210Designs
@210Designs 6 жыл бұрын
mike baker - Yessir 👍🏽 You nailed it bro. Apply glue to one piece, 100% coverage using my finger to spread it evenly. Attach the pieces using the clamps. Tap the edges even using a small hammer. Pre-drill all holes then add screws. After the screws are all in, I remove the clamps immediately. The screws will hold the two pieces together, while the glue sets up, not the clamps. That way you don’t have any down time waiting to re-use your clamps. Some people are against using screws, but I’ve always done it this way and have never had one of my boxes come loose 💪🏽
@mikebaker9313
@mikebaker9313 6 жыл бұрын
Bj Hammon thank you sir greatly appreciated
@210Designs
@210Designs 6 жыл бұрын
mike bake- FYI: if ur using 3/4” material, use 1-5/8” coarse wood screws. Make sure the screws are in flush or sink a bit, of your filling in holes. Insured the pieces are as tight as tight as possible. Run a thin bead of clear silicone in all interior edges.
@210Designs
@210Designs 6 жыл бұрын
mike baker - Anytime bro 👌🏾
@forrestminor306
@forrestminor306 6 жыл бұрын
Could I use this same box design for 4 15s going in the back of a Yukon xl behind 3rd row seats? I know I have to use different measurements but can I use same design with same port?
@210Designs
@210Designs 6 жыл бұрын
FORREST MINOR - With 2-15” plus box room for mounting, you looking at a minimum 34”. My ‘05 Denali does not have s the that much room behind the the 3rd row. You’ll have to measure and see. If so, your good. You want a minimum of 2”-3” clearance off the back hatch.
@GodIsGood1991
@GodIsGood1991 3 жыл бұрын
Sorry but whats the name of the machine you used to cut the sub holes?
@210Designs
@210Designs 3 жыл бұрын
I use a plunge router, with a jasper jig attached and 1/4” straight shank bit www.homedepot.com/p/Porter-Cable-11-Amp-Corded-1-3-4-Horsepower-Fixed-Base-Router-Kit-9690LR/100035094 jaspertools.com/collections/homepage/products/model-200-the-original
@adonissalgado7443
@adonissalgado7443 Жыл бұрын
Hey what kind of material did u use?
@210Designs
@210Designs Жыл бұрын
3/4” mdf 🤙🏽
@dewayneshaver5461
@dewayneshaver5461 4 жыл бұрын
Love the video!! What is the name of the song playing??
@210Designs
@210Designs 4 жыл бұрын
Dewayne Shaver - Thanks man! Song is Coughee Brothaz-On the Road
@dewayneshaver5461
@dewayneshaver5461 4 жыл бұрын
210 / Designs awesome thanks my man!!
@Kendrickendrickc
@Kendrickendrickc 2 жыл бұрын
Nice box how can I make it drop to 28-30 hz
@210Designs
@210Designs 2 жыл бұрын
Thanks 👍🏽 you would need to lengthen the port by maybe 6”- 8”. Not sure if there’s enough room on the backside of the box to do so….without choking down the airflow.
@adonissalgado7443
@adonissalgado7443 Жыл бұрын
Hey i have 4 15 jl audio w03-4…. U think this work out with this box n hit good?
@210Designs
@210Designs Жыл бұрын
I believe this enclosure would be too big for that model subwoofer. JL specs show that model requires 2.75/nt per sub. This box was built based on 3.0-4.0/net per sub.
@adonissalgado7443
@adonissalgado7443 Жыл бұрын
@@210Designs ohhh i see…dont kno much about that but would u have the specs of thats kind of box ur just mentioned?
@210Designs
@210Designs Жыл бұрын
@@adonissalgado7443 Unfortunately I don’t bro. Hit my guy up about a design, he’s the best around 🙌🏽 Be sure and tell him I sent ya 🤙🏽 facebook.com/customaudiobyjd?mibextid=LQQJ4d
@SteveDavisCarGuy
@SteveDavisCarGuy 7 жыл бұрын
This song is hilarious lol
@210Designs
@210Designs 7 жыл бұрын
Stephen Davis - That's my man Devin the Dude. He's my go to guy for bass, slow lyrics and funny ass stories. Got him on over half of my mixed cds.
@MrShineDRK
@MrShineDRK 2 жыл бұрын
I want to build this but add an extra 3 inches to the sides of the box for legs so the box can be turned upside down and the speakers are hidden, Essentially making it a downfireing box I guess, any thoughts on this being good or bad??
@MrShineDRK
@MrShineDRK 2 жыл бұрын
Do you think this would work?
@MrShineDRK
@MrShineDRK 2 жыл бұрын
Also..how long is the port?
@210Designs
@210Designs 2 жыл бұрын
That’s a very creative idea man 🤝 I’ve never seen or built a down fire enclosure of that size or using multiple subs. All the more reason to try it 🙌🏽 That’s how we learn bro, instead of listening to someone telling you it can’t be done. I like finding out for myself personally. Example: people told me not face a port forward in an suv, because it’s louder facing the rear…….so I built it facing forward anyway and absolutely loved it 💯 It’s all about trying new ideas and having fun with it ✌🏽 Thanks for watching and the great question.
@MrShineDRK
@MrShineDRK 2 жыл бұрын
Thank you for replying, I subscribed to your channel for future info😁 can you please tell me the length of the port? I will let you know how my build goes👍
@MrShineDRK
@MrShineDRK 2 жыл бұрын
@@210Designs lol...I sure feel stupid the depth of the port is in the video🤦lol
@isaacbarham5929
@isaacbarham5929 6 жыл бұрын
Hi do you have any idea what’s the absolute deepest (front-to-back) box that will fit into a Tahoe with 2 rows?
@210Designs
@210Designs 6 жыл бұрын
Isaac Barham - No I sure don’t man. This box was for a late 90’s Tahoe. Had less than a foot clearance, from the back doors.
@isaacbarham5929
@isaacbarham5929 6 жыл бұрын
210 / Designs Cool thanks man, awesome box and video!
@210Designs
@210Designs 6 жыл бұрын
Isaac Barham - Thank you, I appreciate that!
@AyeYoStony321
@AyeYoStony321 2 жыл бұрын
What size sheet worked for you
@210Designs
@210Designs 2 жыл бұрын
D Taylor, I believe it took (2) sheets of 3/4” MDF
@deonlevell8519
@deonlevell8519 8 жыл бұрын
how much for a ported 4 12 box for a 84 caprice ?
@bigmike4720
@bigmike4720 5 жыл бұрын
Will this box work for four 12s
@210Designs
@210Designs 5 жыл бұрын
mike levern - Not unless they are space hungry 12s. This was a pretty big box, even for 15s.
@michaelbaker326
@michaelbaker326 8 жыл бұрын
what's is the measurements of this box
@carlosvalencia3388
@carlosvalencia3388 8 жыл бұрын
how did the box sound? i plan on making a similar one for 4 sundowns
@210Designs
@210Designs 8 жыл бұрын
Very good! A lot of pressure. Here's a link of it playing, with only 3 subs. I got a chance to hear it one day and it was brutal! kzfaq.info/get/bejne/f7iZdNKntb7Ucmw.html
@flakobasshead8159
@flakobasshead8159 4 жыл бұрын
What box would u recomend for 3 15" sundown zv4??
@210Designs
@210Designs 4 жыл бұрын
Carlos Ventura - If I had them in my suv. I’d face them up, slot port along the bottom facing back. Tuned around 31-33hz.
@flakobasshead8159
@flakobasshead8159 4 жыл бұрын
So subs up . Bottom port ?
@210Designs
@210Designs 4 жыл бұрын
flako basshead - Thats what I would do, it they were mine.
@flakobasshead8159
@flakobasshead8159 4 жыл бұрын
@@210Designs ok thanks bro
@thefirst12lickit
@thefirst12lickit 3 жыл бұрын
What are the dimensions for the box?
@210Designs
@210Designs 3 жыл бұрын
I don’t have the measurements for this one in my notebooks anymore. But I’m sure I’ve listed them down in the comments a couple times before 👌🏾 Thanks for watching!
@scottgoveiareptiles
@scottgoveiareptiles 3 жыл бұрын
What's the dimensions of the box and port if you don't mind
@210Designs
@210Designs 3 жыл бұрын
I’d have to check and see. Built this box several years ago 👌🏽 Just email me.
@kingcartagena4247
@kingcartagena4247 4 жыл бұрын
Can i use this box for 4 15s kicker cvx?
@210Designs
@210Designs 4 жыл бұрын
king cartagena - Yesssir, but would definitely make sure it’s braced accordingly 👌🏾
@kingcartagena4247
@kingcartagena4247 4 жыл бұрын
@@210Designs thanks man i appreciate your help i will brace it and the cut sheet is the one in the other comments correct ?
@210Designs
@210Designs 4 жыл бұрын
king cartagena - Good deal and yes I believe so. If you ya e questions, just let me know 👌🏾
@kingcartagena4247
@kingcartagena4247 4 жыл бұрын
@@210Designs thanks 👍
@iAmMikey816
@iAmMikey816 8 жыл бұрын
Yo BJ what if I build this same box but put 4 12s in it how would they sound or should I make the box smaller??
@210Designs
@210Designs 8 жыл бұрын
Depends on a few things. What kinda 12s you running? Series and model?
@iAmMikey816
@iAmMikey816 8 жыл бұрын
+Bj Hammon I was leaning towards the kicker l7s or just some alpines
@210Designs
@210Designs 8 жыл бұрын
+Michael Hyman - Say man, I ran some numbers and this box is way to big for 4-12" Kicker or Alpine subs. It's actually on the big side for these 15s. 4-12" L7 Kickers would take 7- 8cf/net and Alpine Type R's would take 4-6cf/net. So I would definitely recommend a smaller box. If you'd like to keep the width the same, I'd make your box shorter or not as deep.
@iAmMikey816
@iAmMikey816 8 жыл бұрын
+Bj Hammon damn thanks man. Imma keep looking keep doing your thing man. Imma fan
@210Designs
@210Designs 8 жыл бұрын
Thanks fam 👍🏽 If I can help out in any way, just let me know.
@jasonkennedy2161
@jasonkennedy2161 3 жыл бұрын
What's the measurement of the cuts?
@210Designs
@210Designs 3 жыл бұрын
Should be listed somewhere in the comments bro 👌🏽 I do not ha e the cut sheet for this one anymore, done too many years back 👌🏽
@rerethomas9339
@rerethomas9339 4 жыл бұрын
What r the specs for the box
@210Designs
@210Designs 4 жыл бұрын
It’s been to long and I can’t remember off the top of my head bro. But I do remember several people asking and I posted them down in the comments.
@black6944
@black6944 10 жыл бұрын
Could I get the cut sheet. Any very nice OUTSTANDING quality
@black6944
@black6944 10 жыл бұрын
Thank you
@210Designs
@210Designs 9 жыл бұрын
Thanks bro. Here's the cut sheet: Bottom: 48" x 36" Top: 48" x 36" Left: 35.25" x 20.5" Right: 34.5" x 20.5" Back: 48" x 20.5" Front Left: 16.75" x 20.5" Front Right: 16.75" x 20.5" Port: 21.5 x 20.5 Tuned around 32hz/12.48cf.
@michaelbaker326
@michaelbaker326 7 жыл бұрын
Bj Hammon
@chillwill3109
@chillwill3109 7 жыл бұрын
+Bj Hammon hey bro I was wondering about the left and right sides of the box , you got the left side measured at 35.25 and the right at 34.50 . wondering if its supposed to be like that ? I'm thinking about building this box for my 02 tahoe , nice box btw !
@210Designs
@210Designs 7 жыл бұрын
Can you send a pic of what I sent you and I'll try and figure out, what I did 👍🏽 Thank you, Bj Sent from Bj's iPhone
@user-ei8iw8so4o
@user-ei8iw8so4o 11 ай бұрын
How deep is your port
@210Designs
@210Designs 11 ай бұрын
I’ll have to see if I still have my notes on this build bro. It’s been a while since we built this one 👍🏽
@futuremotoringdetailcaraud7193
@futuremotoringdetailcaraud7193 2 жыл бұрын
Anyone have spec sheet /dimensions for this box build ?
@210Designs
@210Designs 2 жыл бұрын
This one was built almost 8yrs ago…🫢 not sure if I still have them in my notes. I’ll check and see. Hit me up at bj.hammon@yahoo.com 🤙🏽
@REDMONKEYJUNKY12
@REDMONKEYJUNKY12 Жыл бұрын
Sooo how do I get the specs 👀👀👀
@210Designs
@210Designs Жыл бұрын
@ultimate warrior - Lol, thanks for watching! I built this one 8yrs ago bro and do not have the cut sheet anymore 🤷🏽‍♂️ I might be able to go back and re-watch it to get measurements, to work the numbers backwards. Can’t guarantee if they will be accurate, but should be close. Just hit me up: bj.hammon@yahoo.com
@9one8customs
@9one8customs 10 жыл бұрын
song ?? .. box looks great bro how does it sound ?
@210Designs
@210Designs 9 жыл бұрын
On the Road- Coughee Brothaz
@NoWipeWeekends
@NoWipeWeekends 5 жыл бұрын
What the dimensions please
@210Designs
@210Designs 5 жыл бұрын
Riki Rosa - I believe they are in the vid. If not, it should be in one of the comments below. I don’t have the measurements written down any ore for this build bro, sorry. But thanks for watching.
@black6944
@black6944 9 жыл бұрын
Hey Bj what is the cut for the two right and left front pieces. Your cut list is off on those two pieces
@210Designs
@210Designs 9 жыл бұрын
Good looking out bro. Forgot to make the adjustment when I moved the port to the middle. I re-adjusted the cut sheet in the above comment. Thanks again.
@boober2012
@boober2012 9 жыл бұрын
What is the cut for the two right and left front pieces??
@210Designs
@210Designs 9 жыл бұрын
2ea: 16-3/4" x 20-1/2"
@boober2012
@boober2012 9 жыл бұрын
Thanks I'm going to try to make it this weekend
@210Designs
@210Designs 9 жыл бұрын
Awesome! Hit me up if you have anymore questions. Let me know how it turns out 👍🏽
@dhatbwoy696
@dhatbwoy696 5 жыл бұрын
Great build but terrible music
@210Designs
@210Designs 5 жыл бұрын
Dhat Bwoy - Lol Thanks, next time hit the mute button 👌🏾
@dhatbwoy696
@dhatbwoy696 5 жыл бұрын
@@210Designs lol I can't watch a video without music 😂 but yea I'm hoping to build a box like this too and upgrade to 4 15's .... I got two bd4's 15s at the moment but I need more bass!
@210Designs
@210Designs 5 жыл бұрын
Dhat Bwoy - That’s what’s up. Those will definitely do the job. A lot of people sleep on them for some reason.
@dhatbwoy696
@dhatbwoy696 5 жыл бұрын
@@210Designs yea dude I got it in my pathfinder, I just keep forgetting to make videos to upload. But you can check me out on ig @dhatbwoy to see
@210Designs
@210Designs 5 жыл бұрын
Dhat Bwoy- Bet, headed that way
@kinggg313
@kinggg313 5 жыл бұрын
Can u build me a 4 15 box for yukon xl
@210Designs
@210Designs 5 жыл бұрын
Johnny Riley - At this time, I’m only setup to build locally. But I really appreciate the opportunity and you watching my vids 🤙🏾
@Bigbodysquid250x
@Bigbodysquid250x 8 жыл бұрын
Can you make me one how much were r you located 3 15s e 32 hz box ported thanx
@210Designs
@210Designs 7 жыл бұрын
I build locally and I live in a small town in Oklahoma. 👌🏾
@georgenettlesjr1466
@georgenettlesjr1466 8 жыл бұрын
how to center the 15 inch speakers in this box
@210Designs
@210Designs 8 жыл бұрын
You trace a 3/4" outline around the entire top piece. Then locate your port wall and do the same thing, on both sides of the top piece. Now you measure and draw a line dividing the box into (2) equal halves. Then, draw a line from each corner, making X's. That's it 👍🏽 Drill a hole in the center of each X and use a router with the Jasper Perfect Circle to cut out the holes. I'll post a vid, showing this step by step, this weekend. Thanks for the comment George 👌🏾
@chrisrelite5205
@chrisrelite5205 8 жыл бұрын
I have 4 15s orion xtr154d would this same Dimension box would work for my Subs it's going into a 99 Tahoe
@210Designs
@210Designs 8 жыл бұрын
I believe so, but I've never messed with that model. I'd research and make sure the sub specs are similar to sundown e model.
@chrisrelite5205
@chrisrelite5205 8 жыл бұрын
+Bj Hammon ok thanks let me know what info u get
@chrisrelite5205
@chrisrelite5205 7 жыл бұрын
how much would you charge me to get the dimensions to build a box for 4 15s orion xtr 3000watts at 750rms ported
@210Designs
@210Designs 7 жыл бұрын
Nothing. Just give me the measurements of the area it will be going and I can run some numbers for ya. Port location, tuning and sub location.
@chrisrelite5205
@chrisrelite5205 7 жыл бұрын
can you look for me on Facebook and send me a message I'm under Chris Robles from Tucson Arizona the box that you have in this video I'm a one less likely the same it sounds great but I would like to get the right specs for my Subs but if you can't find me on Facebook I will give you the info here but I could send you pictures on messenger other box I did
@210Designs
@210Designs 7 жыл бұрын
I tried, but there's several under that name. Just hit me up on messenger and we'll be good 👌🏾
@lifewithaustin7086
@lifewithaustin7086 8 жыл бұрын
How do u measure out the subwoofer hole
@210Designs
@210Designs 8 жыл бұрын
I use a Porter-Cable Router w/a Jasper Perfect Circle jig. Both off Amazon. Thanks for the comment 👍🏽
@210Designs
@210Designs 8 жыл бұрын
Austin, did some more thinking on your question and I may have miss read it. For this box, I did one side at a time. I measured (front to back) to find center, marked and draw my line (left to right). Then I measured the width. The outside box edge, to the first port wall, find center, mark and draw a line (front to back). Now I have 2 identical boxes marked out in pencil. Now I draw a line from corner to corner on each box, making Xs. Now I have my (2) centers. Drilled holes and used the router to cut them out. Repeat on the other side 👍🏽
@lifewithaustin7086
@lifewithaustin7086 8 жыл бұрын
+Bj Hammon thanks brother
@210Designs
@210Designs 8 жыл бұрын
+austin fields - anytime 👍🏽
@christianharo1377
@christianharo1377 8 жыл бұрын
I have a similar box but for 6-15" Kicker L7, I think my port is not long enough. Any advice?
@210Designs
@210Designs 8 жыл бұрын
What's the box dimensions? What's your port length X width X hight?
@christianharo1377
@christianharo1377 8 жыл бұрын
Box is 49W x 23H x 58D Port is 21.5H x 15W x 10.5D Torres Tuning Calculator shows a Tune of about 34Hz BUT I dont get any lows nor air out port
@210Designs
@210Designs 8 жыл бұрын
+Christian Haro -In ran some numbers, using the12volt and some long hand math. Seems right. What are you pushing them with? Amp crossover settings? 33cf/gross Port displ: -1.4 Subs displ: -1.2? (no specs online, guessed .2per) Bracing disp: ? Net box cf: 30.4 Min/max port area req: 360"/480" (HxW)
@210Designs
@210Designs 8 жыл бұрын
+Bj Hammon Your port area is a little on the small side, for the cf of your box. Should still slap tho 👍🏽
@christianharo1377
@christianharo1377 8 жыл бұрын
Im using a Massive Audio N4 per 3 woofers since i have not gotten the 3rd amp yet. The woofers are 4ohm wired in series/parallel dropped to 2.6ohms at amp. When I get the other, I will drop it to 1ohm.
@romualdonayre6443
@romualdonayre6443 8 жыл бұрын
boss bj what is the cut sheet for this type of box for the 4pcs 12" thank you ,,,,
@210Designs
@210Designs 8 жыл бұрын
What's type of 12" subs? What is the dimensions of the area, the box is going? Example: LxWxH Port/sub locations on the box? Tuning? Here's my email bj.hammon@yahoo.com
@romualdonayre6443
@romualdonayre6443 8 жыл бұрын
Bj Hammon boss yuo have acount un fb i wel tag to u may subwoofer,,, hers my fb romgonz_1974@yahoo.com
@romualdonayre6443
@romualdonayre6443 8 жыл бұрын
Yes boss u have 4pcs 12" subwoofer akai 3,000 wats double magnet Can u help me if what is the dimension for thes type of box
@210Designs
@210Designs 8 жыл бұрын
+Romualdo Nayre-My fb: B.j. Hammon
@210Designs
@210Designs 8 жыл бұрын
+Romualdo Nayre I think I can help ya, but I will need the specs for your subs. Can you send a link or give me website to go to. I will need to this information first. Not sure if this box will work for your subs. This was built for 4-15" subs not 4-12" subs. Air space and tuning will be different.
@mikebaker9313
@mikebaker9313 6 жыл бұрын
Hey bj do you think 4 skar 15s will bust this box
@210Designs
@210Designs 6 жыл бұрын
mike baker - I don’t think so. What model Skar 15s? If you build it like I did this, you should be good. Customer has the E series Sundowns in this box, still to this day. None of the box seams have budged. 3/4” material, 100% wood glue, 1-5/8” coarse wood screws and bracing are critical 💯
@mikebaker9313
@mikebaker9313 6 жыл бұрын
Bj Hammon thanks I built to same spec's as yours I was just wondering
@210Designs
@210Designs 6 жыл бұрын
mike baker - Cool 👍🏽
@mikebaker9313
@mikebaker9313 6 жыл бұрын
Bj Hammon what size do I need to cut my holes for 15s would 14.25 be enough
@210Designs
@210Designs 6 жыл бұрын
mike baker - What model 15s do you have?
@junebugg420x2
@junebugg420x2 7 жыл бұрын
What you know bout that Devin
@210Designs
@210Designs 3 жыл бұрын
😆😆🤙🏾
@nameless8261
@nameless8261 7 жыл бұрын
sweet build man how much for a design?
@210Designs
@210Designs 7 жыл бұрын
DarthStratus 82 - Thanks man! I'm not a professional, so I don't charge for helping to design a box.
@nameless8261
@nameless8261 7 жыл бұрын
Looking professional to me bro keep up the work it's awesome
@livingbass9617
@livingbass9617 7 жыл бұрын
DarthStratus 82 What I would recommend that you do: use WinISD Beta and RE Audio Box Calculator together to get the best design (both are free). You might have to surf KZfaq to figure out how to use them, but they're fairly easy to figure out.
@davidkleinke7349
@davidkleinke7349 3 жыл бұрын
@@210Designs AWESOME JOB ON THE BOX BUILD!! This is exactly what I'm looking for I'm going to be running 4 skar zvx 15s. In a 2017 jeep Compass and I'm having trouble calculating the port size any suggestions would be greatly appreciated. Width is 39" Depth is 40" Height is 23" Tune to around 32 to 33 Hertz
@210Designs
@210Designs 3 жыл бұрын
@@davidkleinke7349 - Thanks for watching and your comment! Based on your box width and subs. Putting the slot port in the middle, won’t give you enough port area needed, for a box this size. It’ll have to go on the bottom of the box. I’ll have to re-figure this, but I’m in the middle of a few builds right now. Check back in with me over the 🦃 break. I’ll be off and should have time to run some numbers for ya 👌🏾
@michaelbaker326
@michaelbaker326 7 жыл бұрын
hey bj do you thank this box will fit in a 2001 tahoe
@210Designs
@210Designs 7 жыл бұрын
Michael Baker - It should. He wasn't using his 3rd row and had plenty of room, for the port to load off the back hatch. Most Tahoes, Suburbans, Yukons cargo widths, are pretty close to the same 48"-49"width. I have a '05 Denali and built a box that is 48" wide and 20" tall, fits perfect. 👍🏽
@michaelbaker326
@michaelbaker326 7 жыл бұрын
thanks bro I like your work it's awesome I'm building a system for my tahoe right now as we speak got my amp rack built putting in door speakers now then start the sub box build
@louisrowe2009
@louisrowe2009 5 жыл бұрын
@@210Designs I just built one identally it fit into my 2007 Tahoe without the 3rd row seat.theh give you measurements 36x48x22 that's all you need.
@levernbaker3672
@levernbaker3672 8 жыл бұрын
What car is it in
@210Designs
@210Designs 8 жыл бұрын
Chevy Tahoe 👍🏽 thanks for stopping by.
@210Designs
@210Designs 8 жыл бұрын
Video of it in his ride. kzfaq.info/get/bejne/f7iZdNKntb7Ucmw.html
@georgenettlesjr1466
@georgenettlesjr1466 8 жыл бұрын
how can I get one?
@210Designs
@210Designs 8 жыл бұрын
Lol, you gotta be local. I live in a small town, in Oklahoma. Be leave it or not, this box is still taking hits, in the customers SUV. In one of the the comments on here, there's a link to him bumping it. Thanks for the comment 👍🏽
@georgenettlesjr1466
@georgenettlesjr1466 8 жыл бұрын
just built it.
@210Designs
@210Designs 8 жыл бұрын
Send me your email and I'll send pictures. Step by step
@georgenettlesjr1466
@georgenettlesjr1466 8 жыл бұрын
Thanks I finished build is really what I meant. I went 2" taller. georgenettlesjr@aol.com. Thanks for great info.
@carlosvalencia3388
@carlosvalencia3388 8 жыл бұрын
how did the box sound? i plan on making a similar one for 4 sundowns
@210Designs
@210Designs 7 жыл бұрын
Sounded amazing!! Here's a vid of it in action. kzfaq.info/get/bejne/f7iZdNKntb7Ucmw.html
2-15" HCCA Orion Ported Box Build
9:47
210 / Designs
Рет қаралды 42 М.
🩷🩵VS👿
00:38
ISSEI / いっせい
Рет қаралды 27 МЛН
Little brothers couldn't stay calm when they noticed a bin lorry #shorts
00:32
Fabiosa Best Lifehacks
Рет қаралды 21 МЛН
Magic? 😨
00:14
Andrey Grechka
Рет қаралды 20 МЛН
Ported box build for 1-15" L7
4:16
210 / Designs
Рет қаралды 65 М.
Skar ZVX 2 15s Box Design
6:02
Isaac Watson
Рет қаралды 9 М.
4 15S CUSTOM SUBWOOFER BOX BUILD *CRAZY FLEX VIDEO*
10:02
JacobViral
Рет қаралды 15 М.
4th Order Box Build for a Single 10”RF
7:14
210 / Designs
Рет қаралды 244 М.
SUBURBAN 4 15" SUBS FLEX HARD!
8:04
JacobViral
Рет қаралды 6 М.
The Truth About Skar Audio Subwoofers and Boxes For Them!!!
6:35
M.B. Enclosures
Рет қаралды 48 М.
How To Make A Custom Ported Box For $75
24:11
SCS
Рет қаралды 66 М.