Porter Cable C2002 Air Compressor Repair - Fixing a Broken Regulator (002)

Рет қаралды 18,195

2 жыл бұрын

Here's a few links to find this repair kit:
www.amazon.com/DeWalt-D55155-...
www.ebay.com/itm/265623149454...
www.amazon.com/N008792-Air-Co...
#portercable #c2002 #repair

Пікірлер: 35

@patrickpeterman8736 4 ай бұрын

I certainly appreciated your efforts to produce this tutorial !! Patrick.P

@TheSickestNick 4 ай бұрын

I hope it was helpful!

@easonadventures 10 ай бұрын

Thanks I'll be doing this as soon as the part comes in from Amazon. Was trying to figure out if the whole manifold needed to be replaced or not and this seems like it should fix me up!

@TheSickestNick 10 ай бұрын

Awesome! Good luck, and many more years of good service

@envieddesigns Жыл бұрын

Great video, that brass valve piece I had been trying to pull it out from the front with no luck and I didn’t want to damage it so I left it until I came across your video. I got the parts removed and received my new parts today. Will be putting it all back together later today. Thanks!

@TheSickestNick Жыл бұрын

Absolutely; I’m glad it helped! They’re good compressors even with this Achilles’ heel; good that you’re able to get some more life out of yours.

@RPHPros Жыл бұрын

Thanks for posting this video. Exactly what I needed.

@TheSickestNick Жыл бұрын

Good; I’m glad it helped

@tonytrotta9322 Жыл бұрын

Nice Video - The large O-ring shown at the 4:31 sec. mark is the same place where I put mine but, there is another Y-tube that shows it goes in before the place piston part. That O-ring is too big for there so I believe you have the right location. My compressor does not leak anymore. Take care!

@TheSickestNick Жыл бұрын

I’m glad it helped! Thanks for the feedback!

@vint7054 2 ай бұрын

My old PC 6 gallon 150 psi pancake compressor was purchased in 2008, can't find the model or type # anywhere and was almost ready to replace the manifold assembly. Mine leaks air constantly now around the pressure knob and only stops when I turn it all the up, after watching this I will take it apart and inspect the valve assembly and order the repair kit. Thanks

@dastardlydervish Жыл бұрын

Dude, thank you!

@TheSickestNick Жыл бұрын

Absolutely; glad it helped!

@phiz6263 6 ай бұрын

Hi. Thank you very much for the video. Can you tell me which kit works on the C2002 type 3 please? Ive been researching but i wasnt able to find one that states that model number

@TheSickestNick 4 ай бұрын

I’m sorry but I do not know. I’m willing to bet the part numbers have changed, though; so maybe try with that?

@hubertrobinson8825 5 ай бұрын

I've found several porta cable pancake air compressors with a do not use after certain date what the recommended life span of these compressors

@TheSickestNick 4 ай бұрын

I don’t know what it is. And if I was going to speculate on what that expiration date is all about out, I’d guess it’s about the tank’s ability to stay sealed. I think about refillable propane tanks for barbecuing; they have an expiration date, beyond which you can’t get them refilled. All speculation though

@NOE0808 10 ай бұрын

Thanks

@TheSickestNick 10 ай бұрын

Right on!!

@sanzquerol 6 ай бұрын

The problem with mine is the little motor, I think, it makes a weird noise like it does not has the power need it to operate. Any thoughts on that?

@TheSickestNick 4 ай бұрын

That’s possible. Maybe the compressor piston is starting to wear out…? I don’t know what the lifespan on these compressors is, but they’re all getting pretty old at this point

@suspicioustikis 2 жыл бұрын

Will this work on a c2005 compressor too?

@TheSickestNick 2 жыл бұрын

I don't know. The two compressors are very similar, but the regulators are different. They might be similar on the inside but that's a gamble you'll have to take your self

@sptrader6316 2 жыл бұрын

We need someone to design a 3D print file for that plastic piece.

@TheSickestNick 2 жыл бұрын

No kidding! If you design it I’ll print off a bunch and we can split the profits lol

@zerimaryar 3 ай бұрын

@@TheSickestNick Seriously, you can figure out a 3d print at the library (mine you can do for $2), and if that is right, there are companies where they will 3D print in what ever material you want. I'd buy one. :-) I did that for those center pull paper towel dispenser when they put the old out of date and wanted me to switch all mine out, even though they all worked fine, but no key. :-/

@davidkeyser793 9 ай бұрын

What are the symptoms of this type of break that requires this repair?

@TheSickestNick 4 ай бұрын

Full tank of air, pressure on the gauge, but nothing coming out the hose

@yendrygonzales6687 6 ай бұрын

Friends, where can I get all that piece?

@TheSickestNick 4 ай бұрын

eBay, or perhaps amazon

@yendrygonzales6687 4 ай бұрын

@@TheSickestNick okay

@marlonsubingsubing7451 4 ай бұрын

It's normal for that compressor get warm?

@TheSickestNick 4 ай бұрын

Absolutely. If it’s been running for a while, mine is too hot to touch

@Here-2-Learn Жыл бұрын

Mine won’t shut off how do you fix that?

@TheSickestNick Жыл бұрын

Is one of your valves leaking? Like does it have trouble getting up to pressure because of an air leak somewhere? Or does it go way over pressure bc it doesn’t stop running?