How To Grind Glaze Off Pottery - Removing A Kiln Cookie From A Bowl

Рет қаралды 18,187

4 жыл бұрын

Grinding Glaze off Pottery is not as scary as it sounds. Follow along as I separate a Berry Bowl from a Kiln Cookie. 🎯 Click the Link For the complete list of supplies potterycrafters.com/glaze-gri... 👇 SHOW MORE SECTION 👇
-------------------------------------------------------------------------------------------------------------------------------------------------------
❓ Question
Have any Questions, Comments, or even suggestions for Future Videos
Feel Free to Post them in the Comments Section.
Don't forget to 👍 and Subscribe! Turn on Notifications (🔔)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Click the Link For the complete list of supplies potterycrafters.com/glaze-gri... 🎯
-------------------------------------------------------------------------------------------------------------------------------------------------------
Tools Used
Cordless Rotary Tool
geni.us/W6TtzSy
Diamond Grinding Burr Bit Set
geni.us/rEEdpbA
🔷 Tools In My Studio 🔷
Hand Tools
potterycrafters.com/recommend...
Glazes
potterycrafters.com/recommend...
Brushes
potterycrafters.com/recommend...
Favorite Clays
potterycrafters.com/pottery-c...
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Disclosure:
Some of these links go to my website potterycrafters.com and some are
affiliate links where I'll earn a small commission if you make a purchase
at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
All Music potterycrafters.com/MUSIC is used in strict compliance with the appropriate permissions and licenses required All Music is Licensed through artlist.io/ and in accordance with the KZfaq Partner Program, Community guidelines & KZfaq terms of service.
Sponsored videos and brand-sponsored content on this channel will be clearly disclosed within the videos and/or descriptions.
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Click the Link For the complete list of supplies potterycrafters.com/glaze-gri... 🎯
-------------------------------------------------------------------------------------------------------------------------------------------------------

Пікірлер: 51

@user-iz6uk1qs4o 9 ай бұрын

Thx for your quick reply!

@vickivanriel3082 4 жыл бұрын

Hate having to do this! 😊 Love your videos.

@PotteryCrafters 4 жыл бұрын

Me too! Glad we can save some good pieces this way 😀

@briannaroberts6675 Жыл бұрын

I bought a ceramic gnome at target in the 5 dollar section a while back and it has a glazed hat and gloves. I’m on a adventure to try to remove the glaze so I can repaint the gnome for a friend. Wish me luck!

@PotteryCrafters Жыл бұрын

Sounds like fun. Are you going to paint it with acrylic paint or glaze?

@jubi0622 Жыл бұрын

Might be too late for this but you can also try using an acid etching cream like Armour Etch on the glaze and then paint on top of that. Probably would want to use a good primer in between. The etching cream basically eats away at the glaze/glass and leaves you with a slightly textured, matte surface that would likely grip paint better. Easier than trying to get all the glaze off

@PotteryCrafters Жыл бұрын

Thank you for the suggestion Julia 😊

@samiday6486 Жыл бұрын

I'm looking for a way to remove glaze from a decorative section of tile in my bathroom so that I can repaint it to something more in line with my aesthetics (not the previous home-owners). Loving both of these ideas 😍

@PotteryCrafters Жыл бұрын

The only way I can think of for ceramic tiles that are attached to the wall is to first use very coarse sandpaper then fine sand paper to smooth the tiles. If you need to remove a large area I would suggest a using a sander. Hope this helps.

@PotteryCrafters 4 жыл бұрын

👉 Question Of The Day - What Glazing Accidents Have You Had? Are there any other Glazing Questions you need Answered? Leave a comment below😊 potterycrafters.com/glaze-grinding-supplies-needed/

@TDaily-vl7kw 3 жыл бұрын

I had this exact same problem. My mug is still sitting down stairs waiting for me to get a dremel tool and try this. It’s the most beautiful mug that was for a friend so I hope I can salvage it! I wish I could show you all a picture.

@PotteryCrafters 3 жыл бұрын

The diamond tips work the best. I have saved several pieces this way. I hope it works for you also😊

@triciac1019 2 жыл бұрын

I have teeny sharpish specks on the rim of a few mugs that are for Christmas presents. Could I use a diamond nail file on it to take down the sharpness without damaging the look and use of the glaze?

@PotteryCrafters 2 жыл бұрын

That's a very good question. If you are gentle and just remove the sharp edge you will still have glaze left on your mug. The sad part is it leaves a white sanded mark. You have to weigh the pros and cons. If don't do anything you can't use the mug anyway so you may be better off grinding the sharp edge a bit and see if you can still give them as a gift. 😊

@triciac1019 2 жыл бұрын

@@PotteryCrafters wow, thank you for getting back to me so fast. I sure appreciate your advice!

@PotteryCrafters 2 жыл бұрын

You are most welcome Tricia. Good luck. 😊 I hope you will be able you use them. We put so much work into making our pottery. I would love it if all the pieces turned out.

@joanhelenak Жыл бұрын

I have this EXACT problem, thank you!!

@PotteryCrafters Жыл бұрын

Glad it helped! Yes, I still do because I love working with flowing glazes. Sometimes it doesn't flow enough, sometimes too much, and sometimes you hit that sweet spot, and the glaze flows perfectly down your pottery. 👍😊

@theblackholevertigo 2 жыл бұрын

Hi what kinda sander do you recommend for removing glazed off pieces? Thank you!

@PotteryCrafters 2 жыл бұрын

Hi Tiffany. I use this rotary tool with diamond bits. They have changed to design a bit since I bought mine. Here are the links for you to check them out. Rotary tool geni.us/W6TtzSy diamond bits geni.us/rEEdpbA 😊

@storeyblackwell291 5 ай бұрын

I used a diamond bit to remove excess glaze from a few bowls, but then the glaze at the bottom where the grinding was done is now dull. Is there a way to re-shine the glaze? Should I try the Dremel polish kit?

@PotteryCrafters 5 ай бұрын

Yes, my glaze gets dull also. Other than reglazing I don't know if that would work. If you try it can you please let me know if it works?

@oxfordmud7268 Жыл бұрын

What is the name of the actual tip you used. I have a dremel 8220 which look about the same as yours , it also comes with a tool kit but I don’t see a tip that’s long and metallic …is it diamond tip? I think you might have to order them specially?

@PotteryCrafters Жыл бұрын

Yes you are right. It is a Dimond bit. They work the best for me. Here is the link for you to check out. geni.us/rEEdpbA

@wendydoran4129 Жыл бұрын

I would like to try this on a bowl I have. The glaze was not completely wiped off the waxed area on the lower part of the bowl before it was fired. After grinding will it leave a mark where the glaze was? Thank you!!

@PotteryCrafters Жыл бұрын

That is a very good question. Yes, it will leave a dull mark on your glaze. Keep in mind it is on the bottom. I have saved a few of my favorite pieces, and I didn't notice too much of a difference. Make sure you use a diamond bit. Here is a link for you to check out if you don't have the bit. geni.us/rEEdpbA 😊

@wendydoran4129 Жыл бұрын

@@PotteryCrafters Thank you so much!!!

@cyndiclark9657 2 жыл бұрын

I need to remove glaze from a pot so it is porous so I can use it for trailing succulent pot. would it be feasible to do the entire pot? Or would it compromise the structure of the pot? I feel like it would work it would be very tedious but if it’s a plant pot I’m gonna have for five years it will be worth it.

@PotteryCrafters 2 жыл бұрын

Good question. You would only need to remove the glaze on the inside of the planter for it to be porous for your plant. If you feel it would be worth it, then I would do it. If you have any other questions feel free to ask.😊

@cyndiclark9657 Жыл бұрын

@@PotteryCrafters thanks you so much!

@user-iz6uk1qs4o 9 ай бұрын

What drill bit did you use in the video and if it did not come in the original kit, where can I buy one?

@PotteryCrafters 9 ай бұрын

Very good question. It is a Dimond bit they work great on ceramics. Yes you are right it did come with the kit. Here is the link for you. geni.us/rEEdpbA

@xythenjones4263 Жыл бұрын

Hi there! Would you still feel comfortable selling a piece that you had to grind off glaze drips? Would this be something that was reduced price? Thanks! (New to pottery, and not sure of the ethics)

@PotteryCrafters Жыл бұрын

When I get a drip that has to be ground down. I assess the mark the grinder made to determine how much I will sell it for. Most of the time, I will give it as a gift. 😊 Keep in mind that hand-made pottery is not meant to be perfect pottery. 😊

@Sarahtonin252 8 ай бұрын

So whenever I try to do this, I always pool pieces of my piece of pottery like the actual clay off with the glaze. What am I doing wrong?

@PotteryCrafters 8 ай бұрын

Yes that can be tricky. Are you using Dimond bits? And you can apply too much pressure. Hope this helps 😊

@JoyShillingford 3 ай бұрын

Is there not a product that can remove glaze - my pot is large and a lot of the glaze has started to fall off revealing terracotta.

@PotteryCrafters 3 ай бұрын

Hi Joy. Glaze is very similar to glass and is as hard to remove as glass would be. You could try sanding it off with a sander and reglazing it.

@WhaleTank 3 жыл бұрын

What kind of bit are you using?

@PotteryCrafters 3 жыл бұрын

Good question. It's a Rotary Accessory Diamond Wheel Cylinder Point 😊 I found the diamond bits work the best.

@luvanime4life Ай бұрын

What tool is that?

@PotteryCrafters Ай бұрын

It is a Cordless Rotary Tool here is the link for you geni.us/W6TtzSy with a Diamond Grinding Burr Bit Set and the link also geni.us/rEEdpbA 😊

@prairietn1 2 жыл бұрын

What bit are you using

@PotteryCrafters 2 жыл бұрын

Very good question Angie. Diamond bit. Here is the link for you to check out geni.us/rEEdpbA 😊

@ArtHallberg 4 жыл бұрын

Miss hearing your voice as you go through the steps.

@PotteryCrafters 4 жыл бұрын

Thank you.

@clairehilditch72 2 жыл бұрын

This should always be done wet!!!!! Less dust and diamond bits should always be used wet to prolong their use 😳🤔

@PotteryCrafters 2 жыл бұрын

Good tip thank you. 😊 I always grind out side with a Respirator mask. I'll try grinding wet next time.

@clairehilditch72 2 жыл бұрын

@@PotteryCrafters the grinder bits will last a lot longer wet xxx

@lindagoldberg2325 2 жыл бұрын

What type of bit did you use?

@PotteryCrafters 2 жыл бұрын

I use Diamond Burr Bits. Here is the link for you geni.us/rEEdpbA They work great!😊👍