Poulan Pro Chainsaw Sitting Up No Start PP4218 Easy Repair also Mail Call at the End

Рет қаралды 38,599

2 жыл бұрын

Poulan Pro Chainsaw Sitting Up No Start PP4218 Easy Repair also Mail Call at the End
If you would like one of our stickers email us at
Raleytrans@gmail.com and we will mail you one at no cost to you.
Check out Steve's Channel for many many Great videos
‪@StevesSmallEngineSaloon‬

Пікірлер: 71

@Pete379Xra 11 ай бұрын

I bought a new Poulan pro in 2008. After each use I pour the gas out, start it and run it out of gas, clean it and store it. It has never failed to start by second pull. Great saw.

@mikeburrill779 7 ай бұрын

Great video. Called my brother in Michigan he said get an electric. I got this one for free. Great video. Hope I can get mine going. 👍👍👍👍🇺🇲🇺🇲🇺🇲🇺🇲👍👍👍

@RaleysSmallEngines 7 ай бұрын

Awesome!!

@user-mn1dw3dz1y 7 ай бұрын

I just put a new carburetor on this evening. Had the saw since 2008 never had a problem with it. I keep fresh gas in it, I use 50/1 fuel. Piston looks like it is new. Was just going to change the fuel line's but the carb kit was so cheap I just replaced it to. Not bad for a 15yr old 100 dollar saw.

@StevesSmallEngineSaloon 2 жыл бұрын

Right on guys! Happy to see y'all got my delivery.... 👍

@RaleysSmallEngines 2 жыл бұрын

Thanks so much Steve we really appreciate it. Hope you got our Sticker also.

@StevesSmallEngineSaloon 2 жыл бұрын

@@RaleysSmallEngines I sure did. You will see it it my background on the next video...

@RaleysSmallEngines 2 жыл бұрын

Awesome, thanks so much brother. You were an inspiration for our channel, and I have learned so much from you.

@markrichardson3728 2 жыл бұрын

34 3

@philliphall5198 8 ай бұрын

Just got 5 from TSC returns Seems they all have the common problem and easy fix They will be sold in a heartbeat 😊 Love fixing chain saws and these are so simple and easy

@RaleysSmallEngines 8 ай бұрын

Nice 👍

@hhamdar 6 ай бұрын

Was it the carb? I bought a return from TSC it ran for a few minutes and stopped

@bassmatters1012 Жыл бұрын

Thanks, I have the exact chainsaw and exact problem. It ran so good for years so I would have never guessed it would have been a simple adjustment. I ordered a new carb/tune up kit. So wish me luck.

@georgerunnels8099 Жыл бұрын

Papapaaa

@ronaldbiggs7643 Жыл бұрын

Love all of your videos, Thanks again. Never to old to learn something.

@bowhunter10167 4 ай бұрын

Great video , thanks for sharing, you make it look so easy , excellent explanation of adjustment screws on carburetor.

@gravelyman 2 жыл бұрын

I think it's a good idea to take the carb apart and clean it like you did. Another good video. Nice stickers!

@RaleysSmallEngines 2 жыл бұрын

Thank you. Yes especially since we knew it had been sitting up a while.

@robcole8218 2 жыл бұрын

Love an honest tech. Great job

@RaleysSmallEngines 2 жыл бұрын

Thank you sir. I called the customer today and told them the news. They were so happy, it was her father's saw.

@berthalloway8182 9 ай бұрын

Great information

@bowhunter10167 6 ай бұрын

Thanks for the tips , great video

@jathens7974 Жыл бұрын

Great informative videos. - Thanks for the decal - 🙂

@ismaelherrera8744 Жыл бұрын

thanks brother

@JakeMaynard-yt2qy 6 ай бұрын

I need one of those stickers my man

@RaleysSmallEngines 6 ай бұрын

Email me your address and I will get one heading your way. Raleytrans@gmail.com

@alaindouge5499 Жыл бұрын

Thank you for doing this, even if it does not work on my Poulan POS at least you are trying to help

@philliphall5198 8 ай бұрын

It will run

@mikeburrill779 7 ай бұрын

Yeah I got it going. Sometime you need a little help. Thanks again 👍

@Stahodad Жыл бұрын

Nice work and nice job on the video too. Good lighting, sound and editing. 👍

@kbssmallenginerepair2615 2 жыл бұрын

Nice one brother, and great looking stickers!

@RaleysSmallEngines 2 жыл бұрын

Thanks brother!!

@craigwolfe2221 Жыл бұрын

God Bless You

@francislang5075 2 жыл бұрын

i enjoy your videos

@RaleysSmallEngines 2 жыл бұрын

Thank you, that makes me smile. We really appreciate you watching and commenting.

@TheRustyRooster 2 жыл бұрын

Yey another awesome job... nice looking sticker ya got there fella

@RaleysSmallEngines 2 жыл бұрын

Thanks brother I appreciate it you designed it lol

@mr1pearl 2 жыл бұрын

Sure runs nice now bud Have a good one 👍

@RaleysSmallEngines 2 жыл бұрын

Thanks Bill

@rogermcdonald1607 2 жыл бұрын

Tracy, im not a chainsaw guy but i had a Poulan xxv and that saw when i purchased it didn't even have a chain brake. It ran forever and i finally retired it 2 years ago. I put the next size bar and chain on it and loved that little saw. I did have to put fuel and one pull rope on it. Everyone rags on poulan today so their quality must have went down. Very good video and you are getting closer to 1,000 subscribers my friend. Who gets there first you or the Rooster. Can't wait! 👍😎Roger

@RaleysSmallEngines 2 жыл бұрын

Yes sir, the old Poulan was a much better saw. Not sure, probably the Rooster. Lol

@HughRailey Жыл бұрын

I have had several Poulan saws over the years and just bought a 5020 . The biggest thing is they send the saws with the gap too tight , so you just about have to check all the new ones. .025 is manufacturer specs . I run a brand new saw a little when I get it and pull the spark plug out again and blow out the cylinder by pulling on it with the plug out and check my plug for assembly bits of metal , occasionally I find them , even in a large generator I bought. Check for scoring and if none move on, it seems to be the nature of modern small petrol engines. Mine runs top notch .

@frankarvia634 Жыл бұрын

Your a genius

@RaleysSmallEngines Жыл бұрын

🤣 nope

@BW12149 Жыл бұрын

I got a complete tool kit with all types of small engines from EBay for $15 shipped. If you buy a new carb it comes with the tool. There’s no 3 week wait

@ronwilliams266 Жыл бұрын

That was something how you used two saws .the one you had no the table was a new saw with a old bar and the one you started on the floor was a new saw with a new bar. Dont get me wrong ilove these info shows I have two saws that I love but stop runing..this helps alot now I know more what took for.

@RaleysSmallEngines Жыл бұрын

Same saw, same bar. Look at about 6.23 in the video and you will see the Poulan Pro is upside down just like when it was on the floor. I film honestly and don't try to pull the wool over someones eyes. Thanks for watching and commenting my friend, I like that you are paying attention. We hope our videos help you out my friend.

@kennedydelacruz5473 2 жыл бұрын

You rock

@philliphall5198 4 ай бұрын

If you have a poulan you need a carb tool and take it with you during saw use

@berthalloway8182 9 ай бұрын

Very clean! Was it ever used?

@philliphall5198 8 ай бұрын

I just got 5 from a store and they all are like brand new and fuel lines and diaphragms bad Only one needs a new air filter and fuel filter Dumb the fuel after using and purge out carb and dump again will stop 99% of the problems with them

@CuriousKL Жыл бұрын

If non ethanol fuel, i.e. recreation fuel is available, use it to mix you 2 cycle stuff and also for 4 cycle stuff.

@shaungreenlee2376 2 жыл бұрын

My brother passed away a couple years back from Cancer and he has this exact chain and I was wondering if this specific chain saw takes mixed gas or straight ole plain gas??? Thanks

@RaleysSmallEngines 2 жыл бұрын

Mixed thanks for watching and commenting my friend

@philliphall5198 Жыл бұрын

Those little air boots are high price

@captinbeyond Жыл бұрын

I have this same Poulan saw and almost as new and it's doing the same thing as this one in the video is doing. I don't have the spline tool to change the settings. You shouldn't have to do this much adjustment/pampering on a new saw to keep it running. I could understand if it was heavily used and for a lot of years, but not clean and new. To make it worse they make you get a special tool to adjust the gas.

@RaleysSmallEngines Жыл бұрын

Yep, I understand my friend. My personal saws are a Husqvarna 350 and a Stihl ms180c. The Husqvarna I've had at least 15 years, never fails me. Go get a Husqvarna, Stihl or Echo. In my opinion that's you best one's on the market. Yes, if you have to adjust the carburetor on almost any 2stroke you will need a set of those special tools. Thanks for watching and commenting my friend

@donaldnoble4325 Жыл бұрын

I have a 3516 had it running gave it back to customer then he said he couldn’t get it started then I got it back put new carb in and I can’t get it started never ran into a issue like that it has spark fuel and new carb any advice

@vaejoviscarolinanus 10 ай бұрын

Did tighten or loosen? It looks like you loosen.

@HughRailey Жыл бұрын

My name is Hugh Railey, pronounced the same, lol.

@CuriousKL Жыл бұрын

All this crap is caused to the use of ethanol in the fuel. Also using a qualify 2 cycle oil would go along way to help.

@mikeburrill779 7 ай бұрын

Where should I start with the idle screws. I went all in 2 turns out???????

@RaleysSmallEngines 7 ай бұрын

1 1/4

@mikeburrill779 7 ай бұрын

@@RaleysSmallEngines thanks Brother. Great video. Got it fired up but it's flooding. Thanks again 👍

@RaleysSmallEngines 7 ай бұрын

@@mikeburrill779 most likely bad check valve in carburetor. Replace carburetor

@CuriousKL Жыл бұрын

There is such thing as a spark checker. Costs $5.00

@RaleysSmallEngines Жыл бұрын

LOL yep, i have 7 or 8 of them. We try to show things to help people who don't have those. Thanks for commenting my friend.

@frankarvia634 Жыл бұрын

Let me help everyone watching this video. Smash your Poulan with a sledge hammer and buy another

@RaleysSmallEngines Жыл бұрын

Got that right 😆

@philliphall5198 Жыл бұрын

60 bucks repair

@philliphall5198 11 ай бұрын

Buying stihl is like buying a 90 pickup while it sets in parking lot Foolish thing to do Home owners are not stupid anymore