Thank you so much!

Thank you so much!!! 🌈🐾

Thank you!🐾🌈

Thank you!! She’s much missed 😕🐈‍⬛

Enjoy! Working with resin is a lot of fun!!!

Thank you!!🙂

Thank you 😊 it’s part of loving a pet, but so heartbreaking 💔

Thanks! I give most of the credit to the KS resin - I didn't do anything but spritz the very top with alcohol, and it worked out great! If I'd been a bit more attentive while pouring, I might have gotten even fewer bubbles.

I just lost my fur baby of 12 years a few weeks ago. My heart aches for you!

@@shansharris Oh, I'm so sorry!!! It's absolutely heartbreaking 🐾🌈💔

Thank you!!! There are some bubbles in this skull piece but they're very unobtrusive. I've had great luck using the KS Casting Resin in pours like this one -- it really seems to shed bubbles well as it sits.

Thank you!! Just love them lots while you can 💔🐾

Thank you!!

Thanks! She saw me through a LOT (divorce, loss of a parent, 5 house moves, 2 broken feet, 3 dogs, 3 other cats). Hopefully my last pup is showing her the ropes right now. 🐾🌈

@@LuxindasOtherObsessions wow, you went through a LOT together

Thank you! Oh, that must've been so hard... 🌈🐾💔

Thank you!😊😊

Thank you so much 🐾🌈💔

Thank you so much - I really appreciate it!! 🥰

Thank you so much!!

Thank you!!! 🌈🐾

Thanks very much!!

Thank you - losing a beloved furkid is such a heart-shredding loss. 🐾🌈😢

Thank you very much!!

Thank you! I lost my very first dog to congestive heart failure, so when I got the diagnosis on my kitty, I thought we'd have a little more time because the meds can really help. But... didn't work out that way for her.

Oooh, that should be awesome!!

@@LuxindasOtherObsessions Thank you. I will demold it tomorrow 🙂

@@LuxindasOtherObsessions Are you still making resin projects?

@@ParanormalGirl5 I still work with resin, but I stopped making KZfaq videos about a year ago.

@@LuxindasOtherObsessions Aww no. I have my channel here on the paranormal but I mostly make resin things these days.

Thank you so much! And welcome to the channel 🥰 I’ve made a small, flat silicone mold before, but nothing more elaborate. I can recommend a KZfaq channel about silicone mold making if that would be any help.

Thanks very much!! 🌈🐾

Thank you!! 🌈🐾

Thank you

Oh, I'm so sorry for your loss! I lost my BF-dog in June of 2020, and I still haven't recovered at all... Loss of a pet is just gutting. I would get a good casting deep-depth resin for something like that so you don't have to do layers (which can end up showing the layer lines). Personally, I love KS Resin's Liquid Cast (www.ksresin.com/products/liquid-cast-deep-pour 5% discount with code "LuxSwirl"). It seems relatively thick as you mix it because it's a 1:1 ratio, but it gives up its bubbles so beautifully! There is also this Deep Pour Casting Resin from Amazon: amzn.to/3efen3z that takes much longer to set up, but is also mostly bubble free.

@@LuxindasOtherObsessions thank you so much!! I'll try it. 🙂

Thank you very much!! I think I last poured that feather tray mold quite awhile ago now. Here it is: kzfaq.info/get/bejne/jadphNh119ipl5c.html

Thank you!! I’ve heard of cats living to 21 and beyond, but no amount of time is ever enough. 😢🌈🐾 I will check out that video and see if I can identify the mold she used. I’m always searching for different skull molds 💀

Oh, I’m so sorry about your dog. 🌈🐾💔 I lost my best friend dog two years ago, and my heart is still shredded… Anyway, the resin I’ve been using for this skull mold and various similar sized sphere molds is KS Resin’s Liquid Cast Deep Pour. It’s rated for 2” but behaves perfectly in molds 5” deep. It is a 1:1 and it’s not super thin, but it amazingly gives up its bubbles better than any other casting resin I’ve tried. KS is having a sale for the rest of today, and the resin is always free shipping.

Thank you!! I don't think you have to use mold release, but my understanding is that not only does it help the cast piece come out more easily, but it also helps prolong the life of the mold. Once I've demolded something, I wash out the mold with warm water and a little dish soap, then when it's dry, I spray the mold release into it again and put it away till further use. This is infinitely more important with handmade molds like you might buy on Etsy, because they wear out quite quickly. The newest commercial molds (like what Let's Resin sells) that are white and extremely durable last a lot longer without any care at all, but still I try to keep them in good shape 😊 And, yes, someone who watched a much earlier video of mine suggested demolding in soapy water to make the process easier. I've also seen other folks use a spray bottle of soapy water and just spray it down the insides of the molds after first starting to pull back an edge, and that helps also.

@Luxinda's Other Obsessions Awesome thanks for the reply. Can you give me a link for the mould release?

@@FTWarr I'm sorry, I thought I'd left this reply already, but I don't see it now... so here's the affiliate link to what I use. It might seem a bit pricey but the cans will last a long, long time since just a little puff of spray is needed for each use. amzn.to/3WE74Dx

@Luxinda's Other Obsessions Okay thanks for the link. I saw a post on a river table site that said they used WD-40 silicone spray but I have been unable to find the post again and there are several different ones from wd-40.

I poured it all at once using a deep casting resin - I have no patience for multiple pours 😁

This is the resin I used: KS Resin Liquid Cast: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)

I got 2 part epoxy for now.. I use it to coat my airbrushed lures but decided to get the skull mold and put one of my lures in his head. Kind of a showpiece for my lures.. was just curious..ty

@@erichadden77 oh, will look amazing 🤩

I usually spray my molds with a mold release before pouring any resin. This is the one I use: amzn.to/47b49rT