POV Pivot Firebird Team Build

Рет қаралды 14,871

Күн бұрын

Join me onboard as I build up my brand new 2024 limited Edition Pivot Factory Racing Firebird.
Specification as follows:
Pivot Firebird Pivot Factory Racing limited Edition Small
Fox Factory 38 170mm
Fox Factory DHX 450lbs
Fox Factory Transfer 175mm
CrankBrothers Synthesis DH 29"
Industry Nine Hydra
Continental Kryptotal Super Soft DH
Shimano XTR M9020 Brakes
Shimano XTR M9020 Drivetrain
Shimano XTR SM-CD800 front chain device
Renthal Apex 45mm
Renthal Fatbar 30mm rise 770mm
WTB Volt
Deathgrip White
Gtechniq Bike ceramic coating helping to keep this puppy clean and protected in the winter slop!
Im set up in Sterlands Cycles using my World Cup Toolbox and filming on a GoPro Hero 7
#dreambuild #dreambike #bike #bikebuild #biking #cycling #edmasters #bernardkerr #toolboxwars
Music:
Bake A Pie, Storybook, Home, Onion, Wine, Affogato, Butter, Night, Teapot, Ballon, Marshmallow, Picnic, Highball by Lukrembo
Source: freetouse.com/...
• 🎧 LoFi Background Music to Relax/Stud...

Пікірлер: 62

@DarkKnight0183 10 ай бұрын

Mate, that's exactly what I want to see more on youtube. Do more of these please

@BIGGBAGA 4 ай бұрын

beautiful frame finish , really would love a firebird frame .

@michaelmckinley9190 10 ай бұрын

Yes!! Thanks for sharing this. +1 to the folks who'd love to see more of Barny's tip for perfect bike set up, tools, mechanics corner, etc. And Pivot should def release the Barney SetUp and charge $10k more per bike! Model variation could be called BS for short

@dkone1746 9 ай бұрын

That is one dialed tool box!! Great video. Thanks for sharing. 🍻

@Thematty635 9 ай бұрын

Would actually love a tool box breakdown and recommendations video , that would be sooo sick. Like a must have list and what and how the box is organised ect ect.

@andrewdunham8380 10 ай бұрын

Pivot should sell a line of bikes that were built by Barney and charge $1000 more - which would go straight to Barney. Really appreciate how detail oriented and clean this work is!

@Bedw4rdss 10 ай бұрын

😂😂

@dropkick127 3 ай бұрын

Well done

@MTBS.D. Ай бұрын

0:51 voll der Profi!!!! 🥴🤪🥴🤪🥴

@blakeallen3982 9 ай бұрын

Love watching you work on Bk’s channel, you dream build firebird on top of the mountain was spectacular.

@OmnieStar 9 ай бұрын

This was nice to watch. Thanks

@raulespinoza5819 10 ай бұрын

Quality tools Wera,Knipex and PB Swiss 👍🏻

@kimwilliams2557 10 ай бұрын

So awesome to watch

@santiagosalcedo7653 5 ай бұрын

Beautiful workshop and thats my dream bike!

@michaeledwards5241 9 ай бұрын

About time Barney, should have done ages ago👍👍

@stevenkilleen8149 9 ай бұрын

Excellent build as a former navy f 18 and still mechanic a tech great tool control and only thing I still do is torque everything but I literally do everything else same

@bikeaholic7651 10 ай бұрын

Beautiful machine 😍

@Grisseman82 10 ай бұрын

Great video and even better bike 😍

@troycote432 10 ай бұрын

Love the video, we need a break down video of your tool kit!

@Bedw4rdss 10 ай бұрын

Noted!

@sindremathisen3396 7 ай бұрын

Bumping this! Can the black tool box thang be bought somewhere @Bedw4rdss?

@LUCKYSOB 9 ай бұрын

Man, I've seen a lot of nice bicycle paint jobs. But this Pivot looks sick sick sick AF 👀

@Bedw4rdss 9 ай бұрын

I think so too!

@rupertbarker8826 9 ай бұрын

Super chilled video to watch....... there's a lot more swearing, dropped tools and skinned knuckles when I try and tinker with my bikes!!!

@tommynott8603 10 ай бұрын

sick more of this

@cliffordrichardc 5 ай бұрын

dream bike

@tomdevereux5512 10 ай бұрын

Quite curious, my dad (who was a professionally trained bicycle mechanic in the 90's) has always taught me to oil my cables for my derailleur and dropper before putting them in the outer. Do you not do it out of it creating a mess/it's a hassle and it's easier for you to just change a cable, or do you have no personal perceived difference? Bike looks beautiful too.

@Bedw4rdss 10 ай бұрын

Shimano outer cable comes pre-lubed, so not necessary for anything additional 👍

@jasonlindquistmedia 9 ай бұрын

sick setup, I need the xtr stuff and i9 hubs !

@ericsn6158 3 ай бұрын

Wipes filings off with cloth then uses same cloth on stanchions? 😅 Nice build! 👍

@WannaJumpBikes 9 ай бұрын

Nice, been trying to get a job as a bike tech for years with no success, they all want paper work, instead of experience. Some of these builds on youtube are rough as lol (not yours).

@bubblestv7271 10 ай бұрын

I think I could safely assemble a bike after watching this 🤔

@Bedw4rdss 10 ай бұрын

Had a good teacher 😂

@samuelallan1371 9 ай бұрын

Loving the content! What are those scissor pliers at 7.18 for grabbing the outer need to get my hands on them!!

@jacktennyson 10 ай бұрын

So this is what life is like at your height 😘

@Bedw4rdss 10 ай бұрын

Your welcome for the insight 🤓

@Thematty635 9 ай бұрын

Wait, porn on KZfaq? 😂 love this sort of stuff can't believe I hadn't seen it earlier 🤘

@jaybartlett2561 9 ай бұрын

Sick build man. I love my Firebird and have been thinking about going from the X2 air to a coil. How do you like the fox coil?

@Pier-AlexandreDomaine 9 ай бұрын

Me too

@jeremylownes 9 ай бұрын

I switched over on my Firebird, totally changed the whole bike. I am a light rider at 152lbs and the air shock was chattery and too much feedback. Swapped to the coil with 400# spring, less feedback, still plenty supportive, still pedals good, a bit less playful & poppy but much much more controlled. I’ve run the x2 on other bikes and liked it however the Firebird has a pretty firm rear end. I think a heavier rider may not have the problems I did. Side note, the Firebird is very sensitive to ride height/sag and if set up outside of spec it rides like dog shit. Good luck.

@jaybartlett2561 9 ай бұрын

@@jeremylownes I weigh 145 lbs and also noticed that the rear end is a bit chattery considering it has 165m in travel. so your reply is super helpful. my next dilemma is to go with Fox Coil or something like EXT....what coil did you go with? Any suggestions for the fork adjustments at our weight?

@jeremylownes 9 ай бұрын

⁠@@jaybartlett2561 So I went with the fox factory coil, like I mentioned I am super pleased with it. I ran into a guy in Moab Ut riding a firebird with an EXT, I asked how it was, he said when it was working and not back with the manufacturer it was great. However he had some problems with his. I run my fork at 76-78 psi with the stock two volume spacers. High speed compression is open LSC is 3-5 click from open depending on the situation. High speed rebound is 3 in from open. LSR is 7 in from open. The fork will top out a bit boosting off jumps but feels pretty good on the ground. I run a maxxis 2.5 assy in the front 19psi exo+.2.4exo+ DhrII on the rear 24psi with a Cush core.

@jaybartlett2561 9 ай бұрын

@@jeremylownes thank you!

@user-oh9ef4fx4j 8 ай бұрын

Sick build! Very inspiring, for the fork did you use the E-tuned 68HT or regular 58HT?

@jeremylownes 9 ай бұрын

That’s a pretty slick water bottle setup. You want to share what brand it is? Didn’t see it in the components breakdown.

@Bedw4rdss 9 ай бұрын

Fidlock 🫡

@Eric.V. 2 ай бұрын

Was the bottom bracket already pre installed?

@felixallard419 9 ай бұрын

Hi Barnaby, can see that Conti tire is a Dh casing without inserts. What do you think about the enduro casing on them? Wanted to try conti but I run a Cushcore only rear. Was thinking about going to enduro casing. Currently running DD from maxis front and rear with cushcore only in the rear. Do you think enduro casing compares to DD from maxis?