POWDER COAT PAINT LASER ENGRAVING w/ Monport 40W CO2 Laser

Рет қаралды 17,445

Күн бұрын

In today’s video, we’ll be using white and black powder coat paint to create color after engraving wood. We’ll use our Monport 40W CO2 Laser to engrave, powder coat paints to add color, a heat gun in one of the techniques to melt the powder coating, and LightBurn to create a design/create designs. Hope you enjoy the video!
Use our CODE “Anonymous10” for 10% OFF MACHINES on Monport’s website (machines we use are linked below).
⏱TIMESTAMPS⏱
0:00 Intro
0:57 Design/Settings
1:32 Plan
2:41 Using Masking Tape
2:58 Engraving
4:22 Engraving Powder Coat Paint
6:41 Engraving
7:23 Using Heat Gun for Powder Coat
8:54 Results
10:42 Outro
💻SOFTWARE💻
Lightburn: monportlaser.com/collections/...
🎬 PRODUCT LINKS🎬
Monport Desktop Laser: bit.ly/3MGfvv6
Monport Air Purifier: bit.ly/41nRgs1
Monport 9L CW-3000 Water Cooling System: bit.ly/4a76ENm
Transfer/masking tape: amzn.to/3OTOQMG
(We may earn from qualifying purchases when you use the code/links.)
🎬VIDEO LINKS🎬
Laser Engraving Playlist: • Assembling our Eleksma...
#monportlaser #laserengraving
The information provided is for general information and entertainment purposes only. Your use of the site is solely at your own risk.
© Project Anonymous 2024 - All Rights Reserved
🎶MUSIC🎶
Josef Suk, Serenade, Op 6 - A Far Cry
Violin Huasteco - Jimena Contreras
Treat Yourself - Dyalla
Ratatouille’s Kitchen - Carmen María and Edu Espinal
We Cruisin’ - Otis McDonald
Drop - Anno Domini Beats

Пікірлер: 33

@ProjectAnonymous_Duo 3 ай бұрын

Check out our results using powder coat paint on acrylic: kzfaq.info/get/bejne/jLRhnMte07rImX0.html

@letypreciado6272 3 ай бұрын

It nice to see that father and. daughter share the same interest. Thank you for showing me a new product for my laser machine

@ProjectAnonymous_Duo 3 ай бұрын

Thanks for your comment and support!

@Fancylooks 3 ай бұрын

Perfect results with the heat gun and the masking tape, lovely! That powder looks just like the embossing powder scrapbookers use to decorate stamped glicerine, so you will be able to find it in a lot of colours and finishes, including glitter.

@ProjectAnonymous_Duo 3 ай бұрын

Thanks for sharing and watching!

@jp.alaba.official6307 2 ай бұрын

Thank you very much! This helps me a lot.

@ProjectAnonymous_Duo 2 ай бұрын

Glad it helped! Thanks for watching!

@Jonnay0808 3 ай бұрын

Magnets work great to keep thin sheet stock down to the honeycomb bed!

@ProjectAnonymous_Duo 3 ай бұрын

Our honeycomb bed is mad of aluminum so unfortunately, magnets won't work for us. Great tip for those with steel honeycomb beds. Thanks for watching!

@aware2action 3 ай бұрын

Nice to see an unique application.👍 Actually, the laser could be made to mimic the heatgun, by defocusing a bit(intentionally lowering the bed down by a few mm), increasing the power and doing a flood fill(rastering a rectangle(adjusting speed not to burn,but just enough to melt), that contains the artwork). It should be pretty close to heatgun method(may have to do second pass/filling similar to heatgun). The masking is a good idea, without which, this may not work. Just some suggestions....

@ProjectAnonymous_Duo 3 ай бұрын

That is a great suggestion of defocusing the laser. We didn't think of that. A problem that we would have with doing that is are z height needs to be manually adjusted (change shims beneath our honeycomb bed) which would obviously move where our engraving is for the second pass. However if we had a more high end laser, with the z bed adjustment, this would be great! Thanks for watching!

@aware2action 3 ай бұрын

@ProjectAnonymous_Duo Yes, you are correct, that you cannot trace the artwork, when you defocus, since it will shift a bit. But, it should work fine, if you are just scanning a bunch of closely spaced lines covering the artwork and a little more(in the melting pass). Nothing different to applying hot air to melt the powder. Except, it is a hands off process once dialed in, with no worries of blowing out the powder. You could setup the scanlines in a different layer(just overlap artwork and have additional margin to allow for defocus shift), enable it during melting pass(es). I understand, you don't have powered z-lift. But, if you use pegs(or magnets) on honeycomb, and align the artwork, lowering the honeycomb will not be an issue(as simple as removing the raisers). Again melting pass does not need accurate repositioning, since it is a rectangular area slightly larger than artwork.

@MadeInMichigan 3 ай бұрын

I always wondered if powder coat would work or not, but never got around to trying it out. Thanks for doing the legwork on that one.

@ProjectAnonymous_Duo 3 ай бұрын

Thanks for watching!

@terryevans1976 3 ай бұрын

It would be interesting to try some multi color engravings. You would have to remask after each attempt. Just build a jig (I use magnets) to be able to remove and replace the work each time.

@ProjectAnonymous_Duo 3 ай бұрын

We look forward to testing out the use of powder coat paint in various ways. Thanks for commenting!

@weaf27 3 ай бұрын

Great info, thank you and sub'd

@ProjectAnonymous_Duo 3 ай бұрын

We're happy you think so! Thank you for commenting and subscribing!

@znawcatematu5732 3 ай бұрын

łapka w górę 👍 pozdrawiam!

@HoundDogHats 3 ай бұрын

Very interesting. I wonder how well it will hold up over time?

@ProjectAnonymous_Duo 3 ай бұрын

We are curious about that too, if it holds up well this is a cool application and opens up lots of possibilities for plaques, awards, etc.. Thanks for watching!

@maryvanleeuwen1806 3 ай бұрын

I love using powder coat on my laser engraving. For me I could never get a good application using masking, I end up prefinishing my board first with a clearcoat so that the powder doesn’t stain the wood. I do a very deep engrave and fill twice with powder coat to ensure proper melt and adhesion. If it’s not fully cured through there could be powder under the top layer of cured paint and any flex in the wood will pop it right out ( ask me how I know.. LOL)

@ProjectAnonymous_Duo 3 ай бұрын

Thanks for the tip! We have tried pre-sealing the wood in other projects, but can never seam to get rid of the excess powder coating after spreading it into the engraving. Masking makes it so we don't have to be perfect in our application. Also, great point of the powder coating not being cured under a thin top layer. Thanks for watching!

@terryclair2914 3 ай бұрын

Have you tried a IR heat source on the powercoat to avoind forced air?

@ProjectAnonymous_Duo 3 ай бұрын

We haven't, but only because we don't have an IR heat source. Great tip, thanks for sharing!

@randycrisp78 2 ай бұрын

Can you pot a link to the masking tape that you use?

@ProjectAnonymous_Duo 2 ай бұрын

Transfer/masking tape we used: amzn.to/3OTOQMG

@cotiew 3 ай бұрын

How long did it take with the heat gun?

@ProjectAnonymous_Duo 3 ай бұрын

It took about 7-10 seconds on the low setting. You can tell it is set when the texture looks wet. Thanks for watching!

@sgtserginsky 3 ай бұрын

How long did you apply the heat gun to the logo?

@ProjectAnonymous_Duo 3 ай бұрын

It took about 7-10 seconds on the low setting. You can tell it is set when the texture looks wet. Thanks for watching!

@pintokitkat 3 ай бұрын

Why not try to melt the powder coating in the oven, just like everything else that is powder coated?

@ProjectAnonymous_Duo 3 ай бұрын

We have read: “Any oven used for powder coating should never again be used for food.” Unfortunately, we don't have a dedicated oven to do this. Thanks for watching.