Powder Coating Pro Tip
Рет қаралды 22,735
Жыл бұрынPowder Hopper 2.0: www.royalcoatspowdercoating.c...
RC-1 Powder Cup: www.royalcoatspowdercoating.c...
Corona Ring: www.royalcoatspowdercoating.c...
Hopper Holder: www.royalcoatspowdercoating.c...
www.royalcoatspowdercoating.com
RC-1 Light Attachment - www.royalcoatspowdercoating.c...
RC-1 Powder Coat System - www.royalcoatspowdercoating.c...
RC-1 Fan Tips - www.royalcoatspowdercoating.c...
___________________________________________
AMAZON LINKS:
Caliper Piston Removal Tool: amzn.to/3Ju0l9n
Blast Nozzle: amzn.to/3LAUYXn
50 Amp Oven Control Box
Diy Kit: amzn.to/3QAY6ny
Pre Wired Kit: amzn.to/3CjvvPj
_________________________________________
Eastwood upgrades including hoppers, attachments, etc can now be purchased at www.royalcoatspowdercoating.com
Eastwood Hopper Upgrade Kit: www.royalcoatspowdercoating.c...
Eastwood Attachment Kit: www.royalcoatspowdercoating.c...
___________________________________________
Royal Coats Powder Coating located in Spring, Tx.
281-985-1442 call/text
royalpowdercoats@gmail.com
Want me to powder coat your parts? Reach out and we can make arrangements!
I started this channel to show my process and help others. When I started coating there was limited content accessible for powder coating so feel free to reach out to my email with any questions concerning powder coat or equipment. For more personal 1 on 1 training/advice we can set up a time and date for calls or video calls from 30 minutes to 2 hours. Click this link for more info.
www.royalcoatspowdercoating.c...
@greatwhitenorth9159 Жыл бұрын
100% looks and feels better and keeps your plugs clean. Little side tip you obviously use but didn't mention the screws in the plugs, if your plug sits low or you need to shove it in hard as the hole isn't perfect etc screw makes them much easier to remove. Keep up the good content
@IronRainbow 6 ай бұрын
This practice is Iron Rainbow approved, all our certified facilities operate this way, thank you for spreading the word!
@helomaniacapex6170 8 күн бұрын
Also use a deburring tool after clear coat
@FlippinCustomized Жыл бұрын
Great tip
@Jursaw Жыл бұрын
Good tip! Thanks
@cobycrisp326 6 ай бұрын
It only takes that one employee to say man that was easy putting it together this time ..... who painted that .... o we had to use a new powder coater.... o let's use them from now on .... they cost twice as much ... its worth it cause it cost us 2 man hrs less......!!!! BET !!!!!!!
@stayspooled 10 ай бұрын
So important!
@zakaroonetwork777 Ай бұрын
Would you mind, Show us the Results? Effects of both procedures..
@royalcoatspowdercoating Ай бұрын
Good idea! I’ll have to do that one day
@stevenmitchell6347 Жыл бұрын
They have to be removed eventually so doing it early and getting better finish makes sense.
@rorodesignspowdercoating 8 ай бұрын
I can’t believe people don’t do this still!
@royalcoatspowdercoating 8 ай бұрын
See it way too often! Drives me crazy
@hardcore4476 5 күн бұрын
So the powder won’t flow into the areas I take it.
@royalcoatspowdercoating Күн бұрын
Correct, but you should pull the plugs before curing for cleaner edges.
@hardcore4476 Күн бұрын
@@royalcoatspowdercoating Good to know thanks!
@myopiniondoesntmatter505 8 ай бұрын
Where do you buy the plugs sir?
@royalcoatspowdercoating 8 ай бұрын
hightempmasking.com
Concrete Floor Solutions Inc.
Рет қаралды 1,7 МЛН
Goobertown Hobbies
Рет қаралды 199 М.
Right Now Powder Coating
Рет қаралды 14 М.
Biya Channel
Рет қаралды 7 МЛН