Power Tool Storage On A Budget - Cheap And Easy DIY

Рет қаралды 323,575

Жыл бұрын

Getting the workshop organized with 10 scrap wood power tool organizers.
Organization is key to maximizing your space in a small woodworking workshop.
I designed these 10 power tool storage units on the fly to be cheap, easy, and quick to make but are still compact with easy access.
SHOUTOUT TO MY SUPER SUPPORTERS!!!
Moondog
Bjarne Willumsen
Steve Cimorelli
Patric Maher
Heino Colyn
Bullwinkle69
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Other videos you might enjoy:
DIY French Cleat Wall:
• Super Easy 13ft/4m Fre...
Gravity Clamp:
• Automatic Vertical Edg...
Fold Away Miter Saw:
• No clash! MITER SAW IN...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

Пікірлер: 284

@24revealer 5 ай бұрын

These are some of the nicest tool holders I've seen on a french cleat wall!

@danielholt4543 12 күн бұрын

Very ingenious solutions across the board. Well done.

@peterlisyak5396 Жыл бұрын

John, the fact is that a workshop continually evolves, what works now may not in the future, it doesn't matter what others think, it's all about what works for you now.

@orionmec 5 ай бұрын

I like how you do your videos.... I don't need to see a person cut a piece of wood! Great Job, thanks for the entertainment and ideas!

@Flippingdrawers Жыл бұрын

Just what I needed today👌

@bradleytuckwell4881 Жыл бұрын

For shooting from the hip I think you’ve done a great job. They function so well. It’s hard to beat the French cleat system

@gregsweval7670 Жыл бұрын

Great video: creative use of scraps for high need purpose , no BS talk, entertaining to watch because of good ideas, steady flow , only show what is needed to demonstrate concept and methods. You videos are among the very few that I don’t find myself scrolling through to get to the useful information in need.

@kelvingstrachan Жыл бұрын

Awesome. There goes my weekend 😅

@PJaySnowden 7 ай бұрын

I have watched a lot of french clear tool holder videos. Yours are by far the best ideas.

@TheBrianhj 6 ай бұрын

A man after my own heart. 10/10

@JevVan Жыл бұрын

I like how your large speed square ended up with the tape. Thats real life right there.

@whomadethatsaltysoup 3 ай бұрын

Thanks for sharing. An excellent use of space, and very clever, simple holders, put together with scraps, pins and glue. I'm in the middle of re-organising my own garage workshop, which is why I had the good fortune to stumble upon your channel.

@bat21mh Жыл бұрын

I enjoy watching your videos as they are full of ideas best suited for me as I retire very, very soon and intend on turning my single garage into a woodworking shop. So I will be going through all your videos again to reproduce a lot of your ideas before I can attempt any of my own. Keep up the great work.😎

@joelcopeland3018 Жыл бұрын

Great job...

@tommyvukovic8940 Жыл бұрын

Nicely done sir!

@dougggiereid Жыл бұрын

Your ideas are always good. Nothing amiss with any if your tool holders. Simple and practical and so easy to make. Wish I had wall space for a French cleat wall.

@paulmichal Жыл бұрын

Good stuff, thanks for some great ideas.

@kshra2961 Жыл бұрын

U r awesome. I struggled for words of appreciation.

@jdstewart7802 Жыл бұрын

Outstanding! As you said, you could have built something more integrated and "pretty", but your various docks achieved your goals perfectly, and they fit spot on into the French cleat rails you already have. You have a great imagination and a rare eye for simple innovation, my friend. Keep up the great work!

@choiceblade 5 ай бұрын

Your whole delivery has greatly improved, and helped me to connect with you. I knew we'd be mates first video, dude but I'm just saying your confidence and even clarity (which was always there) have visibly increased. Small shop stuff is my jam, so right on, man. Thanks.

@randytellez2451 Жыл бұрын

Some great stuff and a great no nonsense video at that. Subscribed.

@user-sb1wc6gy2w 11 ай бұрын

Wow, that's just what the doctor ordered, I'm going to use your idea 💡 Thank you....

@mornewucherpfennig1336 Жыл бұрын

Love it

@toddhudson4965 2 ай бұрын

Very satisfying. Thanks!

@CodyBrandt580 Жыл бұрын

The videos where you go in without a plan, to my viewpoint, end up being your best videos. Huge fan! Keep up the good work 👏 🙌 👍 👌 💪

@OVHabitats Жыл бұрын

As always it seems like your reading my mind as I build my small work shop. Your simple yet effective remedies are pure genius. Thanks as always!

@INSIDEHARDWARE Жыл бұрын

I like the jigsaw holder!

@WilberWiley 5 ай бұрын

Pretty smart! Nice ideas well crafted too. Thanks

@calaveraXIII 8 ай бұрын

No needed to make it fancy, you did it functional and cheap, congratulations

@markjust86 Жыл бұрын

I've always loved your vids but this one is probably my favourite. Power tool storage has always been my most frustrating thing in the workshop, i will be using some of these ideas for sure!!

@thomascarhart928 Жыл бұрын

Great content Space is at a premium so sometimes you use what you have to make it work! Look forward to each video 👍 Hello from Massachusetts USA

@thomascarhart928 Жыл бұрын

Tanks for the response to my comment.. Having lived in Johannessburg for 5 years as a teenage, your accent just brings back many great memories of the country. Please keep up the grear work be postive and stay healthy

@prestonangstrom2999 Ай бұрын

Only recently started watching your videos. I've been practicing my woodworking skills for a few years, but don't have my shop space organized. I really like your videos; the simplicity of your builds, the Great Video shots, & the fact that you try to keep a low budget, while still building quality storage! Thank you! Keep up the good work. And Cheers!

@danweaver3581 9 ай бұрын

Great video - wonderful ideas & designs. Good place for beginners to start

@MCsCreations Жыл бұрын

Brilliant work, Jean! 😃 Thanks a lot for sharing all the ideas! Stay safe there with your family! 🖖😊

@glenschumannGlensWorkshop Жыл бұрын

Thanks. I am always interested in French cleat storage ideas.

@MrLeram12 5 ай бұрын

Great tips. Thanks for video. For just what I've been searching.

@MrPatdeeee Жыл бұрын

As always AWESOME! Thank you kind Sir.

@FinnJenkins Жыл бұрын

Fantastic ideas. Super creative!

@MrBrianDuga Ай бұрын

Wow, I admire how your brain works. What a great organized workspace.

@vmoutsop Жыл бұрын

Hey, keeping it simple is good. It's efficient, it costs less and does the job just fine. I will probably "leverage" your design for my garage!

@Otisthelesser Жыл бұрын

Great video. Only suggestion may be for the corded trim router. A slot cutout in the base allowing it to be stored with the bit in it and at depth. Not for long term storage obviously, but would allow you to set the tool aside securely with out having to readjust the bit. I know you have gone over to the cordless so the corded just sits most of the time. However, having two trim routers, you may find that you can use them both to add to productivity. For instance one with a flush cut and one with a round over. By having both ready and adjusted you don’t need to change bits keeping bit changes and adjustments to a minimum.

@Anthany0916 Жыл бұрын

I agree. I've put up a few cleats on a wall and started making some basic holders from some plywood, and I'm gonna cut a hole in the center for my trim router so I can keep it at the depth of had it set at like your saying. I'll prolly drill it out like ¾ so it'll fit all without a problem no matter what I got in it. But that's a great idea!

@chriskildun8810 Жыл бұрын

Excellent advice, thank you.

@ericrickert3045 Жыл бұрын

Great designs as usual!!!!

@lemmony0fresh Жыл бұрын

great stuff. I will use these as inspiration for my shop storage.

@31acruz 2 ай бұрын

Nice job, well done!

@ericrickert3045 Жыл бұрын

ok, this is like the 5th time I watched this video as I prepare my new French cleat wall. This was really helpful!

@garrystevenson6632 Жыл бұрын

Definitely not over fancy, just perfect and easy to make.

@larryh7760 Жыл бұрын

Very functional. I love it. I may finally ditch the old pegboard and go with this.

@satwatchers 2 ай бұрын

Fantastic video and sets of plans! Thanks!,,

@allnicksweretaken Жыл бұрын

“Better looking”? I think they look great. Also, there is beauty in their “simplicity”. Designs that are really clean and simple looking, can sometimes be the ones that took the most cleverness to create. It’s easy to over complicate things (I know, I’m an expert at that). These look clean, clever and practical. I like em!

@rogerazevedo4094 4 ай бұрын

Thanks boet, great ideas as i have a small shop

@garybarchas4984 Жыл бұрын

Another project I am going to "borrow"! Lol This allows for so many changes should it become necessary. Thanks and keep 'em coming.

@timjohnson1578 11 ай бұрын

looks great and I will be coping some of these.

@JustinH72 Жыл бұрын

The man has more in his scrap pile then I do in total! another great video

@millsgene Жыл бұрын

I always look forward to your videos they are always something interesting and are great ideas.

@XtraKargo Жыл бұрын

Just needed a holder for the videos MVP. The pin nailer! Awesome video and love the tips. Thanks for sharing.

@Billster1955 Жыл бұрын

Very impressive.

@erroldawdy3637 10 ай бұрын

One of the absolute BEST instructional videos on KZfaq. THANK YOU SO MUCH.

@jerrybeard8622 Жыл бұрын

I think you have the best idea for tools I have ever seen.

@kerry1554 10 ай бұрын

Really, now I have to re arrange my workshop. Thanks. But still excellent ideas

@jennyblair331 Жыл бұрын

Thank you for your inspiration

@waynemiller6070 10 ай бұрын

So many good ideas here. Thanks!

@joeandrewespinosa1041 3 ай бұрын

i really liked the way did it and so smiple

@1bigslug 5 ай бұрын

Great ideas. Thanks for the video!

@chrisjames3127 5 ай бұрын

Great designs. Love the simplicity and especially the way they save wall space by pulling the tools away from the walls rather than up and down. We'll done and thank you for sharing

@lexluthier8290 Жыл бұрын

Simple. Cheap. Practical. What's not to like? Great job sir.

@Mick_B1964 Жыл бұрын

Not only a great vid for tool storage but a shopping list for all commonly used power tools too ! Brilliant !

@araceliadams34 8 ай бұрын

Brilliant job

@jc-crafford Жыл бұрын

Het nou al 2 van jou vifeos gekyk...baie geleer. Dankie. Videoproduksie ook puik.

@timpgod 9 ай бұрын

Your videos have convinced me I need to put in a cleat wall into my small shop! I love these designs.

@randymartin2396 6 ай бұрын

Look very god love it

@barrettdent405 9 ай бұрын

I like this showcase of a number of variations and concepts that can be reused. You’ve not only solved problems in your shop. You’ve demonstrated ways others can solve problems for their own unique tools.

@gettinintonature3350 Жыл бұрын

I got lots of cordless tools and these ideas are going to come in handy once I get motivated to get some plans going for them all and start building. Love the cleats ideas. My storage unit or units will have to be made to be portable for the truck to haul it all. I do house calls for our elderly to do repairs of all sorts for them. Their to-do list turns into to-do pages once i'm done with the job they called for. They ask if I can do another task for them, "Yes I can" is the only answer I want to give them. Hence reason for many power tools to be in my truck , ready to use at a spur of the moment or drop of a dime as they say.

@chip582002 Жыл бұрын

Great Job! I tire of all the people that try to create elaborate things, it makes you wonder lf their whole interest in woodworking is building a shop out so they can make videos and get on youtube. I prefer the craftsman trying to share his skills with the rest of us. Great video and I like your attitude. Keep on keeping on!

@1Tibs1 Жыл бұрын

Amazing work

@evergladesfl 6 ай бұрын

I enjoy the ideas presented here, but I wish you went into further detail about how you went about making the measurements, determing the angles, marking the centerlines...the details that make up the heavy lifting in wood working.

@roush876 Жыл бұрын

This was AWESOME to watch. Should have way more views and subscribers. Everything in its place.

@anthonyespinoza5340 2 ай бұрын

thank you. i really needed this

@oliverkibbel6823 Жыл бұрын

Hi Jean. Greetings from a fan in Tasmania. Been following you for a few years now. Love your videos! Was wondering whether you’d consider making a teeshirt / jumper with “Okay Guys” as a print. I’d definitely buy that.

@WoodshopJunkies Жыл бұрын

I'll have a chat with my brother who designs my shirts.

@mirickarries Жыл бұрын

As an absolute wood working beginner I appreciate your videos. Thank you

@retiefgregorovich810 Жыл бұрын

I've built holders for most of my tools, but I like your designs better so back to the drawing board.

@8000Pavilion 5 ай бұрын

This is great what you made. Don't change it. Perfect and easy to use. Greetings Moekys Woodworking HOLLAND

@peterjdavies7139 9 ай бұрын

Great video and thanks for the idea’s.

@qhadj5387 5 ай бұрын

Really well thought out holders. The jigsaw and belt sander hopders are quite unique.

@sniperneil53 8 ай бұрын

I moved house recently and have a reasonably large workshop. When we moved, all the tools (both corded and battery powered) were put into plastic tubs for transport. Well, now it is time to create storage for these items. I intended to use the French Cleat system and I'm not the inventive type, so your video has certainly helped. You’ve demonstrated ways others can solve problems for their own unique tools and you have given me a number of solutions to the problems I have. I also have to build a charging station for my tools batteries which I plan to keep next to the tool storage. Thank you. You have some great ideas.

@bdownie37 4 ай бұрын

Great video. Thanks.

@jenniferadams8577 7 ай бұрын

Awesome ideas

@pjmosi4686 Жыл бұрын

The drill holder is my favourite, smart.

@murbella7 10 ай бұрын

As usual you take a well-used and well-exposed idea make it better. I am glad I waited so long to change my current storage methods till now (it's called procrastination)

@alangomez7592 4 ай бұрын

That is such a handy wall. I'm making one!

@Micah_A_ Ай бұрын

Great video! My cleat wall space is equally limited so I'm going to take your designs and utilize them for my Ridgid/AEG tools too.

@ChrisGuthrie Жыл бұрын

These are really good ideas. Easy and simple doesnt get much better than that

@joyglass7143 5 ай бұрын

Very cool.

@petermitchell5459 11 ай бұрын

Great video,liked most of the designs. Only one I'd do different was the jigsaw. Thought it was over thought. Maybe a flat "shelf" with a slot for the blade to go?.

@unwired1281 7 ай бұрын

New subscriber love what you are doing!👍👍👍

6 ай бұрын

Love the simplicity

@emileconrad6233 Жыл бұрын

Thankyou so much bud!! I’ve just moved my workshop back to my garage. Starting my French cleat tool bord today!! 🙌💪🇿🇦 Well done with all your videos man, you’re doing super awesome stuff while being so humble! If you’re ever in gardenroute or George area, please pop in for a coffee bud!! 😉