Powerstroke 6.0L: Installing Rear Cover and Rear Crankshaft Seal

No video

Powerstroke 6.0L: Installing Rear Cover and Rear Crankshaft Seal

Рет қаралды 15,562

TooManyToys

Күн бұрын

Installing the rear cover and the rear crankshaft seal on a 6.0L engine.

Пікірлер: 44

@andrewcrawford9532 4 ай бұрын

Just an awesome straight to the point video. Great Job. Your a life saver

@toomanytoys 4 ай бұрын

Thanks - Glad it helped.

@brocklarson457 10 ай бұрын

Great video. Ive watched your other videos and seen you write on some of the 6.0 groups, youre very helpful. Thanks for your brilliance @TooManyToys

@toomanytoys 10 ай бұрын

I appreciate that!

@ai_university 2 жыл бұрын

Very convenient of you to put this video out today. Getting ready to replace my lifter guides with metal ones and replace the lifters while I'm at it. As I'm sure you know, this means my branch tubes need to be moved, and the rear cover must come off. Thank you for showing us how to do things the right way.

@toomanytoys 2 жыл бұрын

Glad I could help, but being my first 6.0, any of this may be 'my way' rather than the right way. LOL

@ai_university 2 жыл бұрын

@@toomanytoys "the right way" is the one that does the best work, that will last the longest, for the least amount of effort. I have studied a considerable amount of other content on this same subject, many using some similar techniques to yours. Your content is definitely on the high end of quality in comparison to anything else that is out there -- especially including documentation I had to pay for. I think you nailed it this time and you consistently do.

@toomanytoys 2 жыл бұрын

I appreciate your comment. I try to do things (including videos) as best as possible, and the subjects are researched well. My comment goes back to my research career. We think we are on the right path until someone else has a different perspective and shows us what we missed. So I'm always open to other ways, better methods, and that I may be wrong.

@ktate2002 Жыл бұрын

I know I’m not the only watcher standing and applauding your excellent work, narration, and video recording skills. Thank you.

@toomanytoys Жыл бұрын

Wow, thank you! sorry for the late reply.

@kevinoneill41 Жыл бұрын

Great video. Liked the RTV silicone touch and the cross torch stept up by 1/2👍

@toomanytoys Жыл бұрын

Thanks 👍

@parkeranderson5074 2 жыл бұрын

Good deal, thank you for taking the time to make these for us.

@toomanytoys 2 жыл бұрын

My pleasure!

@halporter8637 2 жыл бұрын

That's the best video out there on installing the RMS! Thanks for sharing with the us.

@toomanytoys 2 жыл бұрын

Thanks Hal. I appreciate it.

@Adrenacyde 2 жыл бұрын

What a PERFECT match for my Sunday morning coffee. Hell, might even make a Grilled Cheese or two... ;) Appreciate the upload. I'm drawn to videos that are clearly spoken/explained. Nice clean work, part numbers and a little Theory lesson as well. Yours tick those boxes. See you on the next one! -Adrenacyde

@toomanytoys 2 жыл бұрын

Thanks. Morning - it would be a Jersey Pork Roll, Egg, and Cheese.

@over9000pontiacs 2 жыл бұрын

The 6.0 godfather strikes again! Great info as always, J. I feel the moral of this story is that the manual said to put the seal on dry on the OD. so you should always trust the manual nerds at Navistar.....they never ever screw up :U

@toomanytoys 2 жыл бұрын

Oh, they have screwed up a few times. We did those dry seals many times at work and never had a leak. But if you want to use Loctite, it shouldn't be a problem.

@dirtriderz6881 2 жыл бұрын

Thank you very much for taking the time to make these videos, I’m aware filming something makes assembly take so much longer. I’m about to do the same on my 6.0 as soon as my OEM lifters come in. I will definitely be checking back on the video like many of your other content. Hope to one day see the video of you driving the rig! Eventually…lol.

@toomanytoys 2 жыл бұрын

You're welcome! Way much longer!!! Especially if you think you need a better segment when reviewing and have to take things apart.

@Sancho-he6eb Жыл бұрын

….. one thing I’ll add for the DIYers like myself. He had the engine block completely broken down. Most likely you’ll be doing this with the engine still together. BE VERY CAREFUL WHEN INSTALLING THE BACK PLATE. You can very easily ruin the HPFP seal at the top if you’re not careful. I pinched mine and had to pull the turbos on my 6.4 diesel to fix my mistake. 🤙🏻

@toomanytoys Жыл бұрын

Well, first, this is a 6.0L Second, and maybe due to my lack of 6.4L knowledge, if you are doing a full rebuild, would you not put the HPFP on after the back plate was installed?

@jeremyandholly2011 Жыл бұрын

@@toomanytoys not if he had pulled the transmission just to do a rear main seal and rear cover seal. The 6.4 and 6.0 are the same for those.

@toomanytoys Жыл бұрын

@@jeremyandholly2011 Thanks. My approach was towards a full rebuild.

@gregvw123 2 жыл бұрын

More amazing 6.0L content - thank you!

@toomanytoys 2 жыл бұрын

Glad to provide.

@Itsa_Mea 2 жыл бұрын

Another quality production. 👍🏻

@toomanytoys 2 жыл бұрын

Thanks Pete.

@22howards 2 жыл бұрын

Yet another video extremely well done! Thank you

@toomanytoys 2 жыл бұрын

Thanks Chip.

@juliohernandez3420 2 жыл бұрын

Great Video, you are the best, I like the details.

@toomanytoys 2 жыл бұрын

I appreciate that!

@clintcoody189 Жыл бұрын

no oil on the outer parts of the crank seal?

@toomanytoys Жыл бұрын

No, I did it dry. Some use Loctite on the outer lip. But seals with this style of grooving I've done elsewhere, also made by National (the OE supplier), said to do them dry.

@EricThompsonClimber Жыл бұрын

How did you remove the old rear main seal from the cover please?

@toomanytoys Жыл бұрын

I sort of cheated. I left the seal in the cover, pulled the cover completely off, then punched the seal out of the cover.

@EricThompsonClimber Жыл бұрын

@@toomanytoys Thanks for the reply, I put the whole plate in the freezer for 4 hours and then tapped it out in two whacks with a rubber mallet. Aluminum shrinks slightly when cooled.

@robertorodriguez-uq5xy 2 жыл бұрын

I very much enjoy watching yours videos, also I will like buy the version 6 of the lift bracket. If it's possible I will like to have and email so I can ZELLE the correct amount of money for the bracket.

@toomanytoys 2 жыл бұрын

Thank you. All of the purchasing information is in the video "Powerstroke 6.0L Engine Removal Brackets Including Purchasing Information" within the comment area. Just click "Show More". kzfaq.info/get/bejne/r9F9YKRyz9vQmY0.html

@robertorodriguez-uq5xy 2 жыл бұрын

@@toomanytoys sir, can you email me when you have some version 6 available

@toomanytoys 2 жыл бұрын

@@robertorodriguez-uq5xy They are available, the information is moved into the pinned comment area in the video noted in my last reply.

@toomanytoys 2 жыл бұрын

Roberto, Zelle doesn't give me a shipping address, so could you email me yours @ Toomanytoys53@yahoo.com