I Put The Biggest Intake Manifold I Could Buy In My 6.0L Powerstroke
Рет қаралды 27,850
Күн бұрынI just opened my own automotive shop in Bryan, Texas if you would like to bring your truck by for work! The details are below
Phone: (210)385-8153
Address: 9043 SH-6 Bryan, Texas 77807
Website: pscrepair.com/
Email: contact@pscrepair.com Odawg intake Manifold: kcturbos.com/130e3
Powerstroke central merch: powerstrokecentralstore.com/
Today in this Powerstroke Central youtube video We Installed a huge Odawg s2r intake manifold to increase the airflow in my engine by 46% And lower my egts. This will help in the long run when we re dyno this truck next week. I hope you guys enjoyed this Powerstroke Central youtube video make sure to give this video a thumbs up and subscribe down below if you enjoyed.
Powerstroke central Honking kill switch: powerstrokecentralstore.com/p...
ASHER AUTOMOTIVE is A Fass Dealer and can also supply the fass pump for you. If you need help installing it they can do that as well.
If you need truck help or want to build out your truck please visit Asher Automotive in Bryan, Texas:
Asher Automotive asherautorepair.com/
Asher Automotive KZfaq channel:
/ @asherautomotive
0-60 App/dragy: amzn.to/3TdYvis
Buy my 6.0 Powerstroke mods:
Odawg intake Manifold: kcturbos.com/130e3
Diesel power products fass fuel pump: www.dieselpowerproducts.com/s...
KC turbos jet fire s3r turbo: kcturbos.com/50e14
The Diesel Dudes 6.0L Powerstroke tuning and turbo back: (at the bottom of description) thedieseldudes.com/products/f...
Bullet antenna: www.dirtydieselcustom.ca/prod...
Coolant cap: www.dirtydieselcustom.ca/prod...
upgraded Water pump: kcturbos.com/9e605
Spe Lab Intercooler pipes for 6.0L powerstroke: bit.ly/Spelab-Powerstroke-Int...
spe lab cold air intake: www.spelabautoparts.com/produ...\
Warren Diesel Injectors: kcturbos.com/43d48
Get the front bumper here: bumpersthatdeliver.com/new-bl...
SPE Lab coolant reservoir: bit.ly/Coolant-Expansion-Tank
Buy the BG lubricity here: powerstrokecentralstore.com/p...
Want my exact mods on my 6.7L Powerstroke? Buy here:
Diesel dudes delete thedieseldudes.com/products/f...
Leveling kit: amzn.to/3RWUAHQ
Want My Exact Mods on my 7.3L powerstroke ? Buy Here:
Ford emblem: amzn.to/42f1Pwy
front grill : amzn.to/3nnJJcL
headlights: amzn.to/40GDsqD
sinister diesel intercooler tubes : amzn.to/3K9Aoho
Buy the turtle wax tire shine here: amzn.to/3Zb74vi
Truck bed spray liner: amzn.to/3iJEkKN (EXACT PRODUCT USED)
7.3 L powerstroke badge: amzn.to/3NmFIhk (EXACT PRODUCT USED)
Edge cts 3 monitor: amzn.to/41iPeb2
Buy My Exhaust Tip Here- amzn.to/3Alp6Se (EXACT PRODUCT USED)
Bullet Antenna: amzn.to/3TPhKOi (EXACT PRODUCT USED)
Truck Mirrors: amzn.to/3FsFXpo (EXACT PRODUCT USED)
Cold Air Intake: amzn.to/3Dr8lFO
Powerstroke Central merch: powerstrokecentralstore.com/
FOLLOW ME ON SOCIAL MEDIA!!
INSTAGRAM: @powerstroke.central
TIKTOK: @powerstrokecentral
FACEBOOK (POWERSTROKE CENTRAL): profile.php?...
For any sponsors please email me at bnbmediaagency@gmail.com
#powerstrokecentral #60powerstroke #67powerstroke
The Diesel Dudes 6.0L Powerstroke tuning and turbo back: thedieseldudes.com/products/f... Diesel dudes delete for 6.7 thedieseldudes.com/products/f...
@dieselsam 4 ай бұрын
The 6.0 has come a long way congrats brother.
@powerstrokecentral 4 ай бұрын
Thanks bro
@Gladiatorguy1998 4 ай бұрын
Put a built trans in it, it’ll be a different truck.
@powerstrokecentral 4 ай бұрын
Im working on that
@mitchellgertner7942 4 ай бұрын
I’d recommend a warren diesel transmission got the full billet 4r100 on my 7.3 and love it but they are known for their 5r100.
@TySmith01 4 ай бұрын
I just hauled 11k 200 miles 1 way with my stock turbo stock injector 6.0 and we didn’t go under 70 with my competition 5r110 I absolutely love this thing I had to put her in cause I blew my stock 5r110 in Tennessee 500 miles from home lmao 6.0 lyfe
@TySmith01 4 ай бұрын
Didn’t clarify “Warren diesel trans” Is the one to go to🤟🏻🇺🇸
@anthonyc993 4 ай бұрын
@@mitchellgertner7942I have heard great things about Warren diesel trans. I am looking at having one put in my 2018 f350 at some point.
@andrewdebuck 4 ай бұрын
jeez this truck just keeps getting better and better that 4x4 launch is insane
@powerstrokecentral 4 ай бұрын
Yeah dude its nuts just wait for the hpop
@Derek-C 4 ай бұрын
If you ever get to head studs or something you might want to think about power driven diesels ported heads they make for them, more power and I think helps with drive pressure to
@Cole_H 4 ай бұрын
Traction bars will help with some of the axle wrap, getting more power to the ground as well. However a built trans will help out those numbers the most. Careful if you’re bagging on it right after a tune. The trans takes a bit to learn. Easiest way to smoke it is after it’s been tuned without relearning
@FRG-OG 4 ай бұрын
6.0 hands down the best sounding diesel
@powerstrokecentral 4 ай бұрын
I agree with ya on that one
@Cherokee93 4 ай бұрын
Best sounding pickup diesel* 6.7 cummins sound pretty nice too But the old 2 stroke detroits sound amazing
@alexderycker5280 4 ай бұрын
Happy to see you bought a dragy! Nice build!
@BenKlassen1 4 ай бұрын
I'm loving this series! Your 6.0 looks fun to drive. That massive torque really throws you back in your seat.
@GabrielCruz-gq7fz 4 ай бұрын
Great 6.0 Videos, great editing, great everything!
@powerstrokecentral 4 ай бұрын
Thanks brotha
@4x4nutzo 4 ай бұрын
Awesome dude keep it up. Your videos are the reason I haven’t thought about selling mine. They have a lot of potential.
@powerstrokecentral 4 ай бұрын
Thanks bro this video took me over 50 hours to make
@CoastalWheels 4 ай бұрын
Great videos man, when it comes time and if the budget allows I say go with the KDD aluminum ported heads. I plan on running them when I do my truck but in the meantime I’d love to see some content/data on how they perform
@nathanpiaget7098 4 ай бұрын
Thing is a ripper, glad to see you got the dragy too
@CaliFloSince Ай бұрын
Great video! Just wanted to clarify ODawg intake isn’t made by KC turbo. You purchased it from KC turbo….
@thomashixson3916 4 ай бұрын
That thing sounds wicked dude.
@mikemiklavic1930 4 ай бұрын
Great video man!
@powerstrokecentral 4 ай бұрын
Thanks bro
@812racing 4 ай бұрын
To put in perspective you did a 1.85 60ft on a bare street in my street/strip 5.3 ls camaro best I have done is a 1.83 on the street for 60ft and I have done a 7.89 on no prep in the 1/8 and a 4.05 all on the street on a no prep track a little quicker. I wanna see you run that truck to the 1/8 mile out of curiosity. Definitely needs a built trans you’ll pick up a lotttt there prolly go from a 5.05 to a 4.7ish and look into a little bit bigger converter to help spool and launch harder loving the 6.0 videos!
@PowerHungryPerformance 4 ай бұрын
5.04 second 0-60 is pretty quick! I think a built transmission is in your future! If you don't already have a tune on the FICM, that would help as well!
@powerstrokecentral 4 ай бұрын
do yall do ficm tuning?
@PowerHungryPerformance 4 ай бұрын
@@powerstrokecentral oh yea.
@jo-qp7mz 3 ай бұрын
I thought that was a no no? Or is the no no the higher voltage?
@PowerHungryPerformance 3 ай бұрын
@@jo-qp7mz Every 6L should have a FICM tune. It's what gives you the throttle response most people are asking for. The higher-voltage FICMs are fine, but typically if they fail they fail on the logic side more often than not, so you can't just replace the power supply side.
@rcwildman9255 4 ай бұрын
The trans is like “help meeeeeee” haha good stuff though
@2003-2fitty 4 ай бұрын
Great vid brotha! 👍🏻
@powerstrokecentral 4 ай бұрын
Thanks bro
@2003-2fitty 4 ай бұрын
@@powerstrokecentral you gonna drop this truck to stock height or even lower?
@smallengines1018 4 ай бұрын
I hope not lol @@2003-2fitty
@powerstrokecentral 4 ай бұрын
@@2003-2fitty yessir that will drop my 0-60 by .5sec easy
@2003-2fitty 4 ай бұрын
@@smallengines1018 stock height would be best I think with some nice wheels
@cotynietling2567 4 ай бұрын
Built trans and may want to change your diff fluids soon and do they have a compund turbo on these id love to see that
@patrickmcnuttify 4 ай бұрын
Idk if you’ve got the sensor but I’m curious how much the EGTs were effected by it. This is a fun build to watch.
@powerstrokecentral 4 ай бұрын
I will be monitoring the egts in the next couple videos
@Fackler91 4 ай бұрын
Love how it sounds
@powerstrokecentral 4 ай бұрын
Me too lol
@shutdowngoogle 3 ай бұрын
Did you guys have clearance issues with cooler cover?
@tunaboost4801 4 ай бұрын
I have a 19 cummins but damn I love how 6.0s sound haha
@palandro 4 ай бұрын
Have you tried different tuners?
@user-nk9yj8gg6p 4 ай бұрын
Funny how no one talking shit on it 😂 there good trucks take care of emmm
@trevnico 4 ай бұрын
are you still on the stock head bolts?
@flashyfernando3819 4 ай бұрын
Tht new intake woke it up😂😂😂
@sugmaball5383 4 ай бұрын
That rig actually moves. With my luck, my truck would blow up with the biggest studs available. I’m suprised it’s lasted this long
@drewvalentine9455 4 ай бұрын
Cummins guy but the content is super fun 👏
@hunterrossi4584 4 ай бұрын
I remember in the early videos of the 6.0 you were worried about head gasket and head bolts... arent you still running stock?
@powerstrokecentral 4 ай бұрын
Yes sir they are still stock
@CameronFeltz 17 күн бұрын
Did egts go down much??
@stevenbrooks1243 4 ай бұрын
Be blowing this thing up in no time lol
@Andrew-ju4be 4 ай бұрын
What are your thoughts about the 60 now and the potentially they have.
@powerstrokecentral 4 ай бұрын
I think there is a lot of myths around these trucks being unreliable but as of right now i have yet to see that happen to me.
@Andrew-ju4be 4 ай бұрын
I've owned a 6.0 for a year and it's been pretty good. I'm the third owner. The original owner owned it for 19 years but the guy that I bought it off his mechanic messed up all kinds stuff. I've been fixing it. Mechanic just throwing money at caused a lot of issues. An skip on cheap parts cause issues. I bought it for $4,000 fix it for 300 bucks. But I'm slowly going through it going everything putting it back to OEM. Most of the problems with trucks are shit mechanics taking advantage of owners. I am not a mechanic by any means I just work on my own vehicles.
@devinortiz777 4 ай бұрын
One day for a vid do a 1/4 mile run!
@powerstrokecentral 4 ай бұрын
WHen i fix the death wobble and speedo i will
@xDieselv 4 ай бұрын
I’m surprised you didn’t stretch your head bolts
@TreyMulder 4 ай бұрын
You should reverse level it make it a race truck
@kevingay2730 4 ай бұрын
when you're done with the 6.0 you should do a 7.3 next and doc tf out of it.
@powerstrokecentral 4 ай бұрын
Yessir I’m working on that
@kevingay2730 4 ай бұрын
@@powerstrokecentral Awesome man keep up the good work. you inspire me to totally fck up my obs 7.3 XD
@sbfnation2535 4 ай бұрын
Sounds like the trans is flaring up shifting into 3rd she’s definitely gonna need a trans and with a 1.85 60ft that’s better than some people’s streetcars
@b1gbeast86 4 ай бұрын
ahhhhhh the old flare shift haha
@whitlcj1 2 ай бұрын
The clutch????
@hydrodude2948 4 ай бұрын
Damn that old girl rips hard!
@user-td3ev3ri8w 4 ай бұрын
I would have chosen a smaller turbo. Thing is barely spinning it off the line.
@terry-ut4wi 4 ай бұрын
Where you get your delete from please
@powerstrokecentral 4 ай бұрын
Dm me on Instagram @powerstroke.central
@jonkillian9434 4 ай бұрын
Nice 6.0. A 5.9 would be 900 to 1200 in torque I estimate
@pigdestroyz 4 ай бұрын
Smaller wheels and tires and a built trans you’ll definitely be in the 4s
@carminevalente 4 ай бұрын
Is there something like this for a 7.3L?
@powerstrokecentral 4 ай бұрын
Yes
@masterblaster3118 4 ай бұрын
Dude next you need to put a built trans in then paint the truck black put some nice shoes on her and she’ll be bad ass🤘🏼
@powerstrokecentral 4 ай бұрын
Yessir hpop first then tune it different then dyno then trans
@jacksonbesser7825 4 ай бұрын
You should get a race transmission
@powerstrokecentral 4 ай бұрын
Looking into that
@isaacmiller9931 4 ай бұрын
it needs a axle dump and a 8 or 10 inch tip
@tommybragalone7943 4 ай бұрын
No and no
@isaacmiller9931 4 ай бұрын
@@tommybragalone7943 no and no what the axle dump is louder and the 8 or 10 inch tip looks better then out the side
@ConnerJAllen 4 ай бұрын
Yo lmk if you ever need any help! im always in college station, i think i saw you in your 6.7 the other day. i was in my Blue 7.3 hard to miss LMAO
@powerstrokecentral 4 ай бұрын
Awesome bro lol I usually just hire the shop much quicker to do the install and they got all the tools already there I also know it’s done right if I have them do it.
@ConnerJAllen 4 ай бұрын
@@powerstrokecentral yeah that was a huge job, I wouldn’t have wanted to do it myself. I got you tho if you need anything. Love the truck, I may get a 6.0 in the future as a project truck LOL
@powerstrokecentral 4 ай бұрын
@@ConnerJAllen yessir took 8 hours for the tech to do it. Where u at in cstat?
@ConnerJAllen 4 ай бұрын
@@powerstrokecentral good lord, I’ve been there doing a lot of work. I’ve owned 2 7.3s so far and I’ve done a lot of work. I actually live down in Montgomery, but I’m in cstat every weekend to hang with some people and hang out. I was over by the Landing on Holleman Road. I saw you in your 6.7 I drive a big ass blue 7.3 with a 6.0 front clip. Just thought I’d offer my services if you ever need it. I like working on vehicles it’s kinda something I’ve done since my first truck yk. I work at a body shop rn actually leading a lot of stuff. Could make the 6.0 a pretty rig LOL
@powerstrokecentral 4 ай бұрын
@@ConnerJAllen oh yeah I saw u bro lol my girl lives at park west I milk them visitor spots at the landing lol thanks for the offer I will for sure take u up on it someday
@n.kain21 4 ай бұрын
sooo when we gonna lower it and put a cowl hood on it??? Lmao I know money don’t grow on trees, but I do think that would make this truck looks so pretty
@powerstrokecentral 4 ай бұрын
this will be my next mod after the hpop
@jo-qp7mz 3 ай бұрын
The 6.0 is the rx7 of diesel trucks... Since i have two turbo rx7 i stick with my 7.3 diesel slow and reliable
@charleshaizlip9195 4 ай бұрын
Waiting for the day i see a 6.9 pushing over 850 on here😂
@dylandeckard1065 4 ай бұрын
It’s literally the only aftermarket manifold besides custom.
@ryz3367 4 ай бұрын
Odawgs is by odawgs not KC
@alexxrichardson652 4 ай бұрын
You buy a new head gasket yet
@alexxrichardson652 4 ай бұрын
Engine
@adriandelossantos7450 4 ай бұрын
Shorter better tires and you’d be there.
@MontanaMechanicKing 4 ай бұрын
Why didn’t you just do all the upgrades at the same time? You’ve had the turbo out like 3 times now. Not very efficient
@powerstrokecentral 4 ай бұрын
The only way I can afford to do this is to film a video per mod so I have to do it thisxway
@MontanaMechanicKing 4 ай бұрын
Ok just a lot more work
@formula19 4 ай бұрын
It is sort of better because we get to see what each upgrade adds to it at a time, versus doing a bunch at once and not knowing how well “xyz” part affected performance. It also gives him more video content this way. I say he’s doing fine
@Zboys_productions 4 ай бұрын
Odawgs is their own company and kc sells their stuff. Not built by KC turbo
@devinchichester6569 4 ай бұрын
Lower it and I bet your in the 4s lol
@TuckerPucker 4 ай бұрын
Too much money for only 500HP 😂.
@powerstrokecentral 4 ай бұрын
Its got about 650-700 now
@alexxrichardson652 4 ай бұрын
Yes I’m hating it’s a 6.0 power stroke a shit diesel snginer
@HooligansMx 4 ай бұрын
Needs a trans otherwise everything your doing is pointless
@juststopoilisdumb 4 ай бұрын
.
Kirill Multitool
Рет қаралды 74 МЛН
Truck Master
Рет қаралды 103 М.
Power Driven
Рет қаралды 92 М.