PPF Pro Tips - Pro's/Con's Of Bulking Mirrors

Рет қаралды 10,770

Жыл бұрын

In this video, Eric goes over the pro's/con's of installing bulk PPF mirrors. Bulk is the preferred method, as you can provide more coverage, and usually go with less relief cuts and seams.
PPF Pro Tips - Pro's/Con's Of Pre-Cut Mirrors: • PPF Pro Tips - Pro's/C...
If you have any questions, comments or concerns regarding installing PPF, please feel free to email Eric at eric@driveprotected.shop
To save 20% on our Car Care line use code "PROTECTED" at checkout
Find our Car Care Line here: driveprotected.shop
Follow Eric on Instagram: @eric_sawatzky
Follow us on Twitter: @Drive_Protected
Follow us on Instagram: @driveprotected.shop
Follow us on Facebook: @ Drive Protected Shop

Пікірлер: 32

@bees_autodetailing 17 күн бұрын

Thanks for the pointers, we’re just starting to mess around with ppf

@user-gm9to6iw7o Жыл бұрын

I always struggle with doing black mirrors, seem to get silvering in some spots. I prefer doing bulk as well. The only thing with doing a big stretch is the outside edges tend to lift up a tiny bit in some spots after it totally dries. I give you props for doing a black mirror. Most videos on PPF use lighter colors on difficult wraps. Thanks for putting out your videos, well done and much appreciated.

@DriveProtected Жыл бұрын

Black mirrors can definitely be a pain for sure. Silvering can be very easily done if you stretch too much.

@Shaunstonard Жыл бұрын

I used to hate fitting pre cut film to mirrors, this looks so much better as bulk

@hekx1 Жыл бұрын

Thanks so much for the videos. Was gonna have someone do mine, but everyone is booked out for the summer and I need it too soon. Prob gonna fk it up but yolo

@231mariano 7 ай бұрын

Thank you, very useful !

@vindexeon3562 Жыл бұрын

Saw one of your video using hot water on it, maybe should help on this as well. Thanks for the sharing !

@dziadziadziadzia3920 Жыл бұрын

Thanks for sharing knowledge thumb up

@gauravdhiman5950 Ай бұрын

You did not cut the ppf… please make a video with cutting the ppf as well.Will help a lot, thanks for the video 👍🏻

@Average_Cam Жыл бұрын

How do we get our hands on bulk Defense+ film? Keep up the good work and information. Always look forward to learning from you!

@DriveProtected Жыл бұрын

Shoot me an email @ eric@driveprotected.shop and I can get you a price.

@Bezpokraski Жыл бұрын

hello bro tell me what kind of film do you work with? interesting about the materials to see how you glue install what kind of film?

@yongkhmer1331 Жыл бұрын

I like job

@dhoopz1 Жыл бұрын

What do you use and How do you clean crevices on bumpers ?

@DriveProtected Жыл бұрын

Isopropyl alcohol, and a microfibre towel works best.

@blacksam042379 Жыл бұрын

Do you only sell pre-cut kits for tesla on your website? I ordered a pre-cut kits a few years ago for my infiniti, but now I'm not seeing that option.

@DriveProtected Жыл бұрын

Right now we only offer for Tesla, but if you want to order something else, feel free to reach out to me @ eric@driveprotected.shop and I can help you out!

@jeffpoirier1184 29 күн бұрын

Can I use just water as slip solution? I have a small piece to install on a plastic fender flare on my 4Runner.

@DriveProtected 29 күн бұрын

You need soap as well. Water will cause it to stick too fast.

@jeffpoirier1184 29 күн бұрын

@@DriveProtected Thank you for the quick reply. :)

@siddiqkhan4793 Жыл бұрын

Dear while fixing xpel like this in black color coming stretch mark and if not realese the material it will come back and open edges ariya after using squeeze there is coming line in ppf

@DriveProtected Жыл бұрын

What?

@siddiqkhan4793 Жыл бұрын

Yes sir what kind of material using you ?

@DriveProtected Жыл бұрын

Defense+