Thank you Ian for coming down and checking the place out! I love what PM did with the video! Thanks to the team as well
@iansandusky417Ай бұрын
Thanks again for having us, it was an absolute blast and I'm already fired up for 2025!
@KreminIncManufacturingАй бұрын
Donnie, next time you are in Michigan, stop by and see us. We even got Chuck in front of the camera finally!
@iansandusky417Ай бұрын
Thank you very much to the whole TITANS OF CNC team for hosting us, it was a wild place to check out and an incredible amount of expertise under one roof!!
@HoucncАй бұрын
5:51 he was wearing boots thats why he was taller than me just saying 😂 , jokes aside it was nice meeting you man i watch and listened to loads of your videos keep doing your thing man
@iansandusky417Ай бұрын
@@Houcnc thank you very much sir! Pleasure meeting you!
@mikeygoertzy4524Ай бұрын
BOOM!
@donniehinskeАй бұрын
Thanks for coming out man! See ya next year!
@mikeygoertzy4524Ай бұрын
@@donniehinske love you Donnie
@StuartsShedАй бұрын
Titan is doing more than most to make people aware of manufacturing and make it exciting and attractive to newcomers. It takes real talent to be a machinist, welder or fabricator. For years society has made manufacturing sound like a dead end job to youngsters - and Titan is changing that. I applaud him and his team, and the folks at Practical Machinist for showcasing them. 👍👍👍👍
@iansandusky417Ай бұрын
Big time! Not included in the video (for runtime, or I didn't catch it on camera) were a LOT of guests / attendees who looked to be university / high school age - we should all be glad they're getting interested and excited about the trade!
@cliffwedgman7975Ай бұрын
I wish Titan was around for the 30 + years that I owned a machine shop. Maybe I would still own. Was frustrated with the work force out there the training, the stigma of just being a dirty machinist. Which we weren't, Titan is bringing that pride back and i am grateful for it.
@jeremiaha4002Ай бұрын
I bought a SYIL X7 and it will be delivered this month. I’m putting it in my garage. I still work a full time job programming aerospace parts. It was at the right price point for me to get started. I met two people who have the same machine in their garage and they’re making money.
@iansandusky417Ай бұрын
This is the same story I keep hearing. If it gets more people starting shops and growing North American manufacturing, it's nothing but a good thing.
@michaelpawluk6791Ай бұрын
I took the job I'm at now because of Titan. I asked him his opinion in a comment 2 years ago. I'm always thankful. Since then I've learned so much
@ROB-pv6nn26 күн бұрын
That's what it's all about! Give it to Titan, affecting lives in a positive way!!
@DEGENEBABA22 күн бұрын
I didn't know much about CNC machining until I found Titans of CNC.
@BigBananaVTАй бұрын
I've recently found both Titans and your channels within the last month and gotta say they've both taught me an absurd amount of things I never knew! The fact channels like these exist and inspire or teach is amazing and the engagement yall get is proof that even if you think it's fake, it's real enough to many out there while making us better machinists, and that's a win for our industry!
@iansandusky417Ай бұрын
Thank you very much for checking it out - and couldn’t agree more!
@mikeygoertzy4524Ай бұрын
I was running two Chinese lathes at the place I work at two years ago. During that summer, I looked up cnc on youtube and found his channel. I never went back to college, instead i went to school for mills and mastercam the first week we were doing intro stuff learning to plot points in 3 axis well I just opened mastercam and started drawing and watching the Titans of cnc videos and the teacher said it was cool if i did that cause I already had a job...(was working 7-12 then school 1-6) Now at 22 yrs old im running a turret lathe and programming it which I did not learn at school but I learned from titan. Love this trade so much
@nbrowserАй бұрын
Titan is the real deal, his passion for CNC and sharing the information is next to none. The man and his team are pushing the boundaries and learning along the way. He is inspiring others to do better, that can't be missed.
@Alex-rf1mdАй бұрын
as a CNC programmer, I do, some times, disagree with his machinig aproach (like fixturing, tooling and toolpaths) but he really does great work for gathering peoples and showing a good part of the machining world to everyone.
@iansandusky417Ай бұрын
For sure - I mean, I disagree with fixturing / toolpaths / tooling with a lot of the things I see out there - but at least their team is out there showing a way it can be done, and what's possible!
@LoneWolfPrecisionLLCАй бұрын
Because of titans my life changed. The academy helped me get to the point from button pusher to shop owner
@markdavis304Ай бұрын
Awesome! Love it!👏
@Nunak91Ай бұрын
Fantastic!
@raguramspaceАй бұрын
The entire community of manufacturing is one big family❤🚀 Loved the video!
@BillyCardanoАй бұрын
Titan is such an inspirational dude and has a great team of guys. And to give such valuable information freely, makes them a real blessing to have them as fellow Americans.
@comatoze9669Ай бұрын
35 years after i got educated as a manuel machinist i do enjoy titans videos even though i changed proffesion never did cnc when i got got educated we only had punch card nc machines but it was fun best part was making a difference by making testparts to developing companys for disa novo and offshore drilling rigs.... best time of my life
@SleepDeprived255Ай бұрын
i started machining back in freshman year of highschool, getting my feet under me and learning the basics, sophomore year i was one of the few top members of my class and was encouraged to get into programing and the world of CNC using Fusion360. And because of titans increasable academy and constant message of push, go forward and expand your horizon, try new things and processes, i got to where i am today. im now the only machinist for an RND military wearables company and i couldnt be happier.
@christopherleubner663310 күн бұрын
Gonna say his channel is extremely informative, and the details given are seldom shared for free. ❤
@spdcrzyАй бұрын
FREE CNC education for all. A hundred, a THOUSAND years from now, that will be Titan's legacy. No matter what you think of him personally, that has always been his genuine goal.
@iansandusky417Ай бұрын
You're not wrong - there's no platform like it for free out there, and I've genuinely had one of my own apprentices run the lathe program - it's good stuff.
@thedevilsadvocate371028 күн бұрын
Titan has done nothing but give to the manufacturing community. He's the GOAT!!!
@AlejandroPerez-pu5zcАй бұрын
I can't lie I am one of the ones that wonder why the random videos at times. But when I got serious about machining I learned a lot from the older videos and am appreciative for them. Since then I have taught at a local community college and use these videos as reference for lots of applications. They're very heavy on the aerospace and we here in the south we have a lot of tight tolerance oil and gas application. Would be nice if they had something like that has has many machine setups
@travisjarrett2355Ай бұрын
That was great Ian! It was super cool getting to meet and chat with you. Glad you made it down my friend.
@iansandusky417Ай бұрын
Thank you very much for all your hospitality sir - it was a pleasure!
@brandons9138Ай бұрын
My biggest criticism of the Titans of CNC channel is it set unrealistic expectations of how machine shops run. They are regularly getting new machines/technology. Most shops don't work that way. This idea that any shop will be putting millions of dollar worth of equipment onto the floor every year is a bit misleading. People see this and think that's a normal thing. It's not. People get into the trade and are all full of this expectation. They are let down when the shop they are working at has equipment that has been around for 7-10 years or more. Working in job shops, access to the latest tooling and work holding is often not the case. In many cases there can be so little turn around time for jobs that getting tooling from the local too house is about the best you can expect. If they don't have that new end mill on the shelf waiting the day or two that it takes to get in in house is not an option. Those expectations needs to be tempered with a dose of reality.
@iansandusky417Ай бұрын
It's definitely a bit of a shock for some, I'm sure - but I think where it's useful is seeing what's out there and what can be done. For example, we've been running short lots of this one assembly for a customer, and we've just been running it in the 3-axis mill out of barstock. Well, that customer now asked for a quote on a blanket order with thousands per year. Now, it makes sense to look at some of the workholding / machinery / automation / tooling that's been shown, as with work like that - running lights out and getting every second out of a cycle has a way more immediate return on investment with work like that, so it's handy to see what's out there.
@RealNotallGamingАй бұрын
You dont have the right mentality Banks want peoples with clear plans 500.000 euros CNC is nothin if the bank is sure you have jobs for millions Of course is not about your money but workshop money You are not Rich, the workshop will be a rich Place, your pocket will not levitate full of bucks 😂
@MG-sg2ciАй бұрын
I totally agree. Also most shops don't pay a fair wage and aren't nice places to work in.
@brandons9138Ай бұрын
@@MG-sg2ci Yeah. That's something else that isn't really portrayed very well. Even when they do shop tours they tend to be super high end shops, or OEMs. Not every shop is like that. I've been in plenty that are like working in a small closet.
@_droidАй бұрын
Exactly. The shop is unrealistic as hell. They can do it because it's all sponsored (ie. advertisements). A real shop doesn't get free stuff. If they were real and honest about teaching they would be showing how to use equipment that you're going to see in real life at a real job. Not rare stuff only a handful of people will ever see in their life. But you won't see that but you can't advertise a 20 year old mill.
@adi326Ай бұрын
1 year in the CNC trade programing and operating and i learned something new every day not even kidding
@NichtzukennenАй бұрын
Titans of CNC academy is helping me a lot!
@rebeccas3243Ай бұрын
This video is HUGE I’ve been waiting for this since I First learned about titans of CNC
@BestKiteboardingOfficialАй бұрын
Who cares who's paying for it, people are getting skilled, making money and bringing manufacture back on shore.
@SpeedDoctorMachineWorksАй бұрын
Love these guys a ton. They are a big motivator for myself to get my new building setup and machines in house.
@iansandusky417Ай бұрын
Super inspiring, I agree! It definitely makes me want to do more as well!
@markdavis304Ай бұрын
Nice to meet you Ian and team! Great video. Love what you guys and Titan are doing for the industry!
@iansandusky417Ай бұрын
Thank you very much for having us - it was great to meet you and get a glimpse into your incredible organization!
@billmontgomery8900Ай бұрын
I wish I had the chance to become a member of a team that is truly like this. Most shops promise you the world then never deliver on their promises. Or they let a couple bad seeds ruin the shop and create a toxic atmosphere!
@cuttingedgefilm8823Ай бұрын
Great video Ian and the PM #team - I would love to visit next year from over the pond ✈TITANS OF CNC
@iansandusky417Ай бұрын
Thank you very much for checking it out!
@leonschumann2361Ай бұрын
knowing how big titan is in real life. seing how big Ian is is crazy
@russellofcncАй бұрын
Awesome meeting you, @iansandusky417! Your passion for manufacturing is an inspiration and it was great to learn about your background. 🙏
@iansandusky417Ай бұрын
It was a pleasure to meet you sir, thank you very much for all the hospitality and opening your doors to us!
@stevensmart8868Ай бұрын
Good to here all the titans guys back stories.
@iansandusky417Ай бұрын
It was for me as well - I had no idea the amount of experience these guys have, but I suppose it should be apparent!
@ArthurFieldАй бұрын
Great Video Ian! Ive been following Titans journey since 2015, like you said so aptly in the video. You cant argue with all he's done for manufacturing. 🎉
@iansandusky417Ай бұрын
Thank you very much sir!
@senorimotorАй бұрын
Incredible man, with an incredible team with an incredible facility…but more than anything else, it’s his free academy that’s most impressive
@robertjeffery610017 күн бұрын
At the very minimum he makes the trade fun and real.
@blabla-kk8bl3 күн бұрын
Titan is not a just machinist he is also a showman and he getting paid for it somehow.Who works for him in the videos are classic CNC machinists which you can find every where.
@InsideRidersАй бұрын
Love it! Can't wait for my new Heller to arrive so I can...BOOM!
@user-vn6hi2bi3gАй бұрын
GO TITANS!
@mjshorty19Ай бұрын
I've been watching Titans videos for a few years, been machining for 10. I am a fan of how he is using his platform to try to get young people interested but too many of his videos are just unrealistic in most applications and aren't actually usable or helpful to the average machinist. I would love it if he would sort of go to a channel that was more about the average type of work a machinist sees in this trade in 2024 rather than "watch me run this endmill at 1000ipm until it breaks"
@user-si2ow2mv9eАй бұрын
Will take that and work to make videos that will help guys like you… Truth is, we post videos every day and have certified almost 18000 certs for free. We also just released our 5 Axis series and have a Swiss Academy coming out that touches on everything from the fundamentals to making real parts. It’s KZfaq and we run fast…. But I have a ton of shops that love it because they are running at 10% the speed and afraid that they are going to break tools… I always say, I run fast to open your mind to show you what is possible… show you that the earth isn’t flat… and that we can venture out to make money… real money.
@swikockiАй бұрын
Great to see things like this. 10:46 made me laugh "Even Barry!!!"
@ronblack7870Ай бұрын
so the question i have which is never answered is does he pay for any of the machines on his floor or are they all fronted to him no charge as a promotion machine that eventually may get sold as a lightly used demo ?
@k53847Ай бұрын
At this point I suspect that the partners are providing them as a promotional tool. I suspect (and I think Titan has said this in a video) that there are more than a few other companies that have offered to provide him machines. And I suspect that Doosan is completely happy with how this has worked out for them.
@PerezAutomatedАй бұрын
Definitely not paying for these machines and definitely not oatijg for the repair either 😅
@andrekemp505917 күн бұрын
Positive Movement super great motivation
@lvxleatherАй бұрын
Pretty rad. I'd like to make it out there sometime, maybe 2025.
@iansandusky417Ай бұрын
BOOMBASTIC 2025 is looking like it’s going to be nuts if you can make the time!
@czeslawpiАй бұрын
That was a great video! Gets me excited too.
@damianfitzpatrick3465Ай бұрын
I would still be cutting in slow motion if it weren't for that guy
@TrPrecisionMachiningАй бұрын
very good video IAN,,thanks for your time
@iansandusky417Ай бұрын
Thank you very much for checking it out!
@joncannon614516 күн бұрын
I got into machining field because I took a random class in high school to fill 3 periods and I would’ve never got Into this field had I not took that class. There’s not enough people pushing these manufacturing trades.
@CATANOVAАй бұрын
A good video, well done. 👏
@wanderer-bhupinder25 күн бұрын
I am following titans of cnc 5years I love all titans of cnc team but jassie smith is my favourite ❤. I am a cnc turning programmer 2 axis 😅
@2SMPerformanceАй бұрын
Killer job Ian!
@iansandusky417Ай бұрын
Thank you very much!
@alexkern9134Ай бұрын
Nice video right here.
@jeffgraffham2981Ай бұрын
good stuff
@ryebisАй бұрын
Haha, Titan is the quintessential brash American personality. Not my cup of tea, but if he gets people interested and increases manufacturing in the country then more power to him and his team.
@rgetsoАй бұрын
Haas missed a huge opportunity to partner with Titan. An opportunity that Doosan, Kennametal, Heller, Tornos, Syil, Haimer, MasterCAM, and others have taken advantage of to their delight. Only a fool would believe Titan's of CNC is a typical job shop or manufacturing facility. Every single video or event is a sponsored spectacle created by bonafide machinists with goal of eyes and clicks. The free training (i.e., Building Blocks series) is legit. Welcome to marketing in the social media age.
@texasblaze1016Ай бұрын
HAAS might be trying to stay as a small company. If they make too much money then the company could end up out of their control. Not everyone wants to be successful in life
@texasblaze1016Ай бұрын
HAAS also stayed in California so you know they dont mind making less money and paying almost 50% taxes. It might not seem like a big deal but hanging out in cali is a big indicator that they dont mind scraping by as a company
@tavish2696Ай бұрын
I guess I wouldn't say I dislike Titan because of his attitude or the way he goes about machining but more along the lines of the fact that every single video he releases feels less like a machining video and more of a marketing video. Very, very rarely does he put out an educational and practical video nowadays.
@ODGColornChromeАй бұрын
Wow, I had no idea Titan came up like that and did what he does for those needing a legitimate 2nd chance! Boom!
@iansandusky417Ай бұрын
Pretty crazy eh! Cool stuff!
@prodesign8189Ай бұрын
If Titan were just feeding the poor, soup on a corner, there would be nay-sayers. God bless Titan and the gang.
@JoseRodriguez-fy9so17 күн бұрын
im interested in this career path, since i dont have much options here in venezuela as a machinist, what would it take to learn and get a job?
@richardharvey216Ай бұрын
The things that Titan,s make are just incredible. And people who say that he and his team. Are hurting the business are Freaking wackco,s. The Man is Proving what can be done. If you take a chance
@thunderthormxАй бұрын
I really wamted to go but had a hot job i had to get done. Hope they have another open house id like to go
@thenijni3018Ай бұрын
You'll never guess
@Tonnesen9823 күн бұрын
People think he is fake lol?
@cem_kaya17 күн бұрын
Was there any wire EDM there ?
@iansandusky41715 күн бұрын
Yep! GF was there!
@AndreBazenga28 күн бұрын
What the frigg, 15 years in jail and still comes out as a boss?! Man, I gotta lot catching up to do.
@markhorner4982Ай бұрын
i will have to ask Ian, did you think, try everything you say boom about in a job shop, when you pay for everything yourself , it wont happen, he used to be a hass man when they sponsored him, didn't he suddenly have a shop full of DMG MORI, ( I COULD BE WRONG) as always get kicked off his site from a disagree about speed and feed and choice of cutter , and i will say Ian Sandusky is a job shop machinist and not full of bull like Titan, and every machine shop in the world would love the free shit he gets ,
@iansandusky417Ай бұрын
For sure, it's definitely an aspirational shop and aspirational content - but when I talked to Titan and the guys about things like speeds and feeds (I'm not going to blow a spindle trying to get every second out of a cycle I can) - he said that the real point is that if they run it at 1000 IPM full depth, while I probably can't do that - if you're currently running it at 40 IPM, you should feel perfectly safe dialing that up to even 80 IPM and half your cycle time - or even 200 IPM if you've got the right workholding. To me, it's more of a benchmark of what you can do if something calls for it - even if I can't translate a lot of it directly 1 for 1 into my shop due to some of the expenses involved.
@Daniel-vq9zbАй бұрын
Real tv show lol😅😂
@ManuelRamcannyАй бұрын
Let's keep it real. Those who hate Titan is because they envy him or feel like they know everything and don't want to learn new ways to do the trade. He is all about teaching and learning, and making perfect parts on spec. Why would you be against that?
@iansandusky417Ай бұрын
I think this is a BIG factor as well.
@pablov9212Ай бұрын
Tight tolerance GD&T, QA/QC, vibration analysis, stress/deflection of fixtures or workpiece.... all very tedious and boring to most people. I loved his earlier stuff, but would love to see him use his success to get someone knowledgeable on realistic "more boring" topics between the commercialized partnership ads once in a while. I am grateful he is sparking more interest in machining but realistic expectations are okay once in a while, too.
@jaskaasiАй бұрын
the swiss machine specialist says he's not been on camera before but he has done ecaxtly same style videos for other companies btw
@Blobby_HillАй бұрын
trade is severely under paid
@joeschmoe76Ай бұрын
LOL he's a legend in his own mind. They don't do anything dozens of other shops have been doing for years.
@340ironmanАй бұрын
How many clips do we stick together before we can call it a video?
@iansandusky417Ай бұрын
If you prefer the longer-form style, there are plenty of tours here in that format to check out!
@fc3srotory370Ай бұрын
He's detrimental because employers think they can run the same feeds and speeds with a clapped out Haas HL4 and temu end mills.
@iansandusky417Ай бұрын
Whose fault is that though?
@anthonysmith4072Ай бұрын
IS HE REAL THE DEAL?? Powerful question
@chronokoksАй бұрын
What really ticked me off that they tried to market "precision flat stones" that weren't real "precision flat stones". That made my blood boil.
@christophervillalpando5865Ай бұрын
The Stones were ground flat from the factory.
@chronokoksАй бұрын
@@christophervillalpando5865 they were not!!!!! They were lapped on lapping machines!!! Lapped on cast iron lapping plate with too much of a large grit size slicion carbide!! I know how Tyrolit makes their stones very well because I installed a machine there some years ago!! I know they're process well. You need to grind the stone with a diamond wheel, not lap it with a giant grit silicon carbide powder.
@chronokoksАй бұрын
@@christophervillalpando5865 This is a basic way how many of the stones are normally produced!! Tyrolit never understood what really is a precision flat stone. If their technologist held a proper set of flat stones in his hand he would understood. Tyrolit and Titan didn't do the most basic of market research. What dopes!
@chronokoksАй бұрын
@@christophervillalpando5865 again the stones were lapped on a lapping machine but with a too large of a grit silicon carbide... it's absolutely basic step that almost every grinding stone producer makes
@Jameshenson281Ай бұрын
Why Syil? Because Syil sweetened the pot more than the others Titan was looking to add to the floor. Partners with Titan are the ones who paid the most to be there.
@renetr6771Ай бұрын
The only thing i could see in every single Titans - video is, that the shown machines never produced parts, they all look like new. And most times, the Titans just try to fool their non-specialist viewers (like showing the zero runout after facing a part). Maybe, thats not how the company is in real life, but thats how the Titans are presenting them self on social media.
@chrystoni226925 күн бұрын
Why do all these comments feel like bots?
@iansandusky41725 күн бұрын
Which do you mean?
@chrystoni226913 күн бұрын
@@iansandusky417 kind of like this entire empire is an online gimmick that, to your credit, has worked very well. For the rest of the 99% of machinist on the planet... This is bullshit. One tool has more carbide $ than 5 jobs. Anybody liking this that much has no idea.
@iansandusky41712 күн бұрын
@@chrystoni2269 eh, you're entitled to your opinion for sure
@tjpprojects7192Ай бұрын
Toronto Florida?
@winningwithoutracing7811Ай бұрын
Being a machinist is like being in an abusive relationship and just trying harder.... Sadly you can't fix societal problems with more technology.
@SensibleCreeperАй бұрын
The dudes a goof
@peoplepower1272Ай бұрын
why is my comment being blocked?
@jeremiahwalker4135Ай бұрын
If only yall understood flower mound is part of Fort Worth NOT Dallas. I love practical machinist but boy was this a fumble 😅. Fort Worth hates Dallas
@iansandusky417Ай бұрын
Blame me, the dumb ol' Canadian! Geography ain't my strong suit!
@ipadizeАй бұрын
1:17 Hawk Tuah!
@thinker4life482Ай бұрын
I Lost ALL respect for Titan who has built himself based on rebuilding American Manufacturing when he decided to start using AND SELLING. ""Syil" Chineese made CNC Mills! Total Sellout! Made me Sad, Disappointed amd Hurt....
@iansandusky417Ай бұрын
Which similarly priced, similarly equipped American machines would you have preferred?
@thinker4life482Ай бұрын
@iansandusky417 Go start with a TM-2P and a Phase Perfect! Everyone who is somthing of worth knows. The way sombody starts a shop is generally how they will build it! You just helped the enemy.... Instead of doing the work of assembling the best talent in our country to make an EVEN BETTER more versitile machine. Like a FLEX CNC but even more versatile! This makes me sad!
@thinker4life482Ай бұрын
@@iansandusky417 Yes! Go invent a even better machine... DO NOT parade yourself as the savior of manufacturing only to then support the ones who stole it in the 1st place!!!!!! Remove all usa branding from yours. "OR" Redeem yourself and do the unthinkable! Put out a even better machine that streamlines setups! Anything else is HOLLOW!!!!!!!!! I don't care if it is temporary or just for a 1 time deal... Don't Take The Easy Path! Always Take The Right Path!!!!! Make A Better Machine!!!! Stainless steel way covers... How bout NO WAY COVERS and a bridge mill design! Less parts heavier loads! RFID tool system.... Proprietary built in endmill sharpener for roughers! This is my design! Works like a tool probe...
@hotlaprc1980Ай бұрын
I used to believe in him but now he has gotten away from the education base and not creating anymore education material and only building up a distribution network for the brands that want to play ball. so now he is only in it for me the money and using the money they take in to travel the world with his wife and kids and write it off as travel expenses for "other" company, pure manipulation now, IRS should be looking into this firm
@TITANSofCNCАй бұрын
Sorry, you feel that way. I actually pay huge taxes to the IRS (millions). I also pay my team very well… I am proud that I take care of my guys and can write this to you now with a clear heart knowing that they will read it. Have you seen CNCEXPERT.com? It’s a free platform that I have spent millions on to give free education to the world. Our app comes out in August. We have also certified 18,000 people or more like issued 18,000 certs. Each one has to be uploaded and inspected by my team before we reject it or accept it… all for Free. We have our regular Academy that keeps growing… just posted our 5 Axis Series recently… We also have the Aerospace Academy, Grinding Academy and this summer we come out with our Swiss Machining Academy…. Which is all Free and can be found at titansofcnc.com Yep, Free education is actually super expensive and you can’t just go get grants… So while everyone else talked about doing something and the need to do something… I actually went out and built something. I don’t like asking for money to fund free education… so I / we decided to build up distribution… to fund free education. I have been driving a nice car and taking trips since I was just solving problems for SpaceX and Blue Origin. I solve problems and make great money doing so… I always have. But now, I also teach millions how to do exactly what I do. I meet teachers and shop owners every day and they tell me stories of how they have changed their class or changed their company because of our videos… I love that and it gets me even more excited. Wednesday, I will be at Panerai… guess what, they didn’t pay me. I instead purchased one of their watches and fell in love with the technology. I then simply asked if I could show the world how they make their products… for free. At the end of the day, I started filming and making videos before KZfaq was even a thing… I created our TV Show to bring awareness to our trade and to inspire machinists around the world. Today, you would find it very difficult to find anyone who has done more for the advancement of advanced manufacturing that Titans of CNC. We have literally inspired hundreds of million and currently have 400,000 students registered on our Free Academy.
@Graveyard_666Ай бұрын
Based in Texas yet reeks of Hollywood.
@kisspeteristvanАй бұрын
if this is the real look, than i know everything there is to know about titanscnc , and it is as suspected .
@iansandusky417Ай бұрын
5 comments on this channel, all negative - I hope you’re feeling heard dude
@peoplepower1272Ай бұрын
FYI my 6 attempts to post a comment here have all been blocked. Censorship?
@PracticalMachinistАй бұрын
We haven’t been blocking any of your comments. KZfaq automatically blocks comments that don’t follow their guidelines.
@Hanal503Ай бұрын
We have the most intelligent NC robots....in the company........They Titan just think..they are ...! No way .....! Only stories! And ...marketing!
@Foxtrott_4Ай бұрын
Lol I'm dreming of starting a shop but I'll not touch anything chinese
@markdavis304Ай бұрын
It's Swiss, German, Japanese components assembled in China. There are plans to bring even the assembly here to Texas.
@diytwoincollege7079Ай бұрын
I stopped following them. While it’s good for the community to have a voice, I don’t see how his style is benefiting the industry.
@iansandusky417Ай бұрын
I think one of the main things I see them doing really well is being able to get people outside of the industry interested in manufacturing, and thus helping get more people involved. Very important when we've had a massive age-out of skilled machinists and only a trickle of new blood entering the trade in the western world.
@RadiateGaming-ez4op27 күн бұрын
You like CNC? play satisfactory....you will be busy for days
@kirk56374 күн бұрын
Lots of white supremacist and racist in this field. If you know you know.
@PrincessAnnabellzDad12 күн бұрын
Titan is a clown. Always has been. Always will be.
@tipsypistole405514 күн бұрын
This is “Actually” BS. Selling a dream is more lucrative than being an actual manufacturer.
@iansandusky41712 күн бұрын
How is providing free educational platforms like the CNC Academy BS?
@johanea9 күн бұрын
Ah, so he is a criminal. Bah, not worth my time watching one.