No video
SSR 125cc Dirt Bike Restoration! Complete rebuild!
Рет қаралды 433,783
Күн бұрынOn this Episode of Praska Boy's Garage I completely take apart every single nut and bolt of this SSR 125cc dirt bike and restore it! What a challenge it was but in the end I wouldn't have it any other way. This is my favorite project I've done so far! Thank you for watching, and like always, I will see you on the next one!
Thank you to VMC Chinese Parts! Truly an amazing company that is my go to for parts when working on my projects! Please check their website first when ordering parts for your next project!!!
www.vmcchinese...
Thank you to Dan Fitzpatrick and his shop Rim Right by D & D Designs! He and the Rim Right team did an outstanding job with the power coating for this project!!! Here is the link to their website and KZfaq Channel:
www.rimrightio...
/ @rightnowpowdercoating
Parts and Cost Breakdown:
$56.95 - Pirelli Scorpion MX Tire 80/100-12
www.vmcchinese...
$43.95 - Rim Wheel Rear - 12" x 1.85" - 32 Spoke
www.vmcchinese...
$42.00 - Rim Wheel 14" x 1.4" - 32 Spokes
www.vmcchinese...
$28.95 - Duro Off Road Tire 60/100-14
www.vmcchinese...
$28.00 - Front Disc Brake Caliper
www.vmcchinese...
$22.95 - Mini Dirk Bike Body Fender - 7 Piece
www.vmcchinese...
$22.00 - Brake Caliper Rear Disc
www.vmcchinese...
$21.90 - Gas Tank - Pit Bike
www.vmcchinese...
$20.95 - Air Filter - 38mm Two Stage UNI
www.vmcchinese...
$19.95 - Rear 10" Adjustable Shock
www.vmcchinese...
$19.00 - Brake Rotor Disc 190mm
www.vmcchinese...
$19.00 - Seat 18.25" Motorcycle
www.vmcchinese...
$12.95 - Twist Throttle Kit
www.vmcchinese...
$10.50 - 36" Brake Hose
www.vmcchinese...
$9.95 - Brake Master Cylinder
www.vmcchinese...
$9.95 - Engine Cover Mounting Bolt Kit
www.vmcchinese...
$8.80 - 20" Brake Line Hose
www.vmcchinese...
$7.95 - 12 x 3.00 Tire Inner Tube
www.vmcchinese...
$6.60 - 39" Clutch Cable
www.vmcchinese...
$5.95 - Body Fender Bolt & Nuts
www.vmcchinese...
$5.60 - Kick Start Lever Kickstarter
www.vmcchinese...
$4.95 - 14x2.25/2.25 Inner Tube
www.vmcchinese...
$200.00 - Core
$35.00 - Miscellaneous Hardware
$26.60 - Foot Peg & Kick Stand - eBay Item#362574953784
$23.93 - Wiring Harness - amzn.to/39eFfef
$16.95 - 220mm Brake Disk - eBay Item#162701189992
$14.95 - Wheel bearings - eBay Item#182747086786
$13.95 - Handle bar grips - eBay Item#292981792076
$12.00 - Brake Lever - eBay Item#254271921375
$12.00 - Shift Lever eBay Item#171939820943
$10.59 - Fork Oil - eBay Item#372683377589
$10.50 - Fork Seals - eBay Item#161867430471
$7.99 - Chain Slider Guard - eBau Item#183229740880
$6.78 - Clutch Handle - eBay Item#253810607241
$5.10 - Dip Stick - eBay Item#372733527247
$825.14 - Total Cost (not including powder coating)
Thanks for watching!!!
Copyright Free Music used:
Adventures by A Himitsu www.youtube.co....
There It Is by ZAYFALL / zayfallmusic
All Night by Ikson / ikson
Bay Breeze by FortyThr33 / fortythr33-43
JPB - High [NCS Release] • JPB - High | Trap | NC...
We Are One by Vexento / vexento
@adamtadlock3335 3 ай бұрын
I really appreciate how you know how to talk dirtbike....
@fullthrottletae9937 5 жыл бұрын
The tubes happen to the best of us...also my hat goes off to you pb you have a lot patients I really enjoy how you really take these bikes and quads apart down to the bare bone and build them back better than factory 😎🖒✊
@PraskaBoysGarage 5 жыл бұрын
Thanks brother! I appreciate your continued support! SMH on those tubes man, they about killed me!
@mbgames6778 4 жыл бұрын
deaunte love I agree
@PTucker0864 2 жыл бұрын
I don't have any patience for tube tire changing....I hated it with bicycles as a kid...lol. The most valuable thing I learned from your channel is the simplicity of those little engines, and how cheap they are to repair. Nice work. 👍
@PraskaBoysGarage 2 жыл бұрын
Thanks! Glad to hear you like the content and yeah 100% they are cheap and an easy way to pick up small engine repair skills.
@NastyMoto 4 жыл бұрын
Yo that’s legit, I need to restore my $50 pit bike!
@PraskaBoysGarage 4 жыл бұрын
Nasty Moto Do it man! It’s a blast!
@NastyMoto 4 жыл бұрын
Praska Boy's Garage I’m planning on it, just gotta get the funds lol
@jeremiakendrick9165 4 жыл бұрын
@anonymous whys that?
@hackgod9797 3 жыл бұрын
The builds just get better each time
@PraskaBoysGarage 3 жыл бұрын
Thank You!
@valium4016 4 жыл бұрын
Dude, that pit bike looked great before you restored it, though when it was done. It looked absolutely amazing. Keep it up my dude!
@PraskaBoysGarage 4 жыл бұрын
Valium YT Thanks man, will do!
@maximus759 5 жыл бұрын
Omg PB it's about time!! (respectfully said) I have been having massive withdrawal from not seeing anything new from you in ages!
@PraskaBoysGarage 5 жыл бұрын
Lol! Man this one the struggle was real, but we made it!!! I promise you won't wait as long for the next one :)
@burnie773 5 жыл бұрын
She's a little beauty , great job !
@PraskaBoysGarage 5 жыл бұрын
Thank You!!!
@Tye3014 2 жыл бұрын
Great build, love the fact you kept it real and showed us the difficulties you ran into and the solutions! inspiring….
@private1712 4 жыл бұрын
Restoring bikes is so fun and can earn u money I was raised in the garage and I saved money till I was 12 then I bought a mess of a ttr125 and I myself went thru it and fixed it up and on December 28th I ended up trading it for a fully built kx125 which is worth way more and fits me better seeing how I’m 16 now
@PraskaBoysGarage 4 жыл бұрын
Love it man! I got started with a box of parts from a 49cc pocket rocket. Put it together together and never looked back. Good luck on your future projects brother!
@soos8649 3 жыл бұрын
I commend your level of patience
@PraskaBoysGarage 3 жыл бұрын
Lol, thank you!
@Andrew-sj6ox Жыл бұрын
I like the quote that the video ended with. Don’t get me wrong the video is cool. I have 3 ssr’s i am rebuilding. We’ll one almost done, one kinda finished as we got plastics today and then one down to a frame. We got a tao Tao also 110cc. Some goof ball put wrong spark plug in it locked it up. That one is a complete rebuild . I have to get a back swing arm, tank and odds and ends for the 3rd ssr. The video was cool glad i took the time to watch start to finished. Great content. Bike came out looking sweet!
@maximus759 5 жыл бұрын
Thank you thank you PB. Finally got back home and had time to watch it. Very informative as always. Can't think of a better way to relax after a long day. :)
@PraskaBoysGarage 5 жыл бұрын
Love it! Thank you for the support, I appreciate it!
@braydenmartel7301 4 жыл бұрын
On the video that you got the Chinese 125cc and restored it! That helps me so much cause I’ve had one but it’s been sitting and I had no clue where to start but now I feel confident I can get it running again no problem and if I have issues I know where to come back too! Love the vids man keep it up!
@PraskaBoysGarage 4 жыл бұрын
Brayden Martel Thanks brother! Good luck on your project and if you run into any issues don’t be afraid to ask! Here to help any way I can 😉
@spyropyro3159 4 жыл бұрын
That bike is sick!
@PraskaBoysGarage 4 жыл бұрын
SpyroPyro Thanks!
@nicktopo8380 Жыл бұрын
pro life tip, when using tubes put a tiny amount of air in them first, will keep from twisting and causing hot spots to pop
@Mudmowerdiesel 4 жыл бұрын
Amazing video
@PraskaBoysGarage 4 жыл бұрын
Thank You!
@kevinkev1530 3 жыл бұрын
Nice i love how u show the ups an downs, nothing always goes as planned, I like how ur creative an go with the flow, nice work
@PraskaBoysGarage 3 жыл бұрын
Thanks dude! I appreciate your feedback!
@dawsongiardino2802 4 жыл бұрын
Just a quick tip if you ever do tires on a bike again use dish soap on the bead. It’s night and day so much easier with the soap.
@PraskaBoysGarage 4 жыл бұрын
Great tip! Thank you!
@ronniewilliz153 4 жыл бұрын
Im currently doing one rn well slowly i am while doing my sons 4 wheeler an alsp while messing with my eletric an nitro rc i love anything with a motor man
@PraskaBoysGarage 4 жыл бұрын
I am right there with you man! Anything small engines is what I'm into!
@Youngangslime 3 жыл бұрын
What a legend for replying to every comment after a year
@PraskaBoysGarage 3 жыл бұрын
Thanks dude! I don't have other forms of social media so I want to make sure I connect with everyone on KZfaq. Eventually I hope to have so many comments I can't keep up, but until then I'll be here!
@brucebasil4164 4 жыл бұрын
Enjoying your channel. I like your shop setup. I appreciate that you complete your projects on one video.
@PraskaBoysGarage 4 жыл бұрын
I'm glad you like it! I built the shop almost 3 years ago with the intent to work on power sports. Has been good to me so far!
@jonathanroberts6159 5 жыл бұрын
I find that if you put the tube in the tire first and fill it with just enough air to keep it round but not full I pop way less tires. Also the counter mount tire changer from harbor freight is fantastic!!!!!!
@jonathanroberts6159 5 жыл бұрын
Also you do an AMAZING job on these Chinese bikes! They are my favorite. Cheap and easy(most of the time) to work on!
@PraskaBoysGarage 4 жыл бұрын
Jonathan Roberts Thanks man! Usually I’ll edit the video of me getting it done the first time, but with the tubes I felt like sharing my pain might show some viewers these projects aren’t so easy and even guys that have been at it for years still struggle sometimes!
@chrismilligan9696 3 жыл бұрын
I live about 20 minutes from rim right and didn't even know it was there.. I have been looking for a powder coater.. Thanks for the video..
@PraskaBoysGarage 3 жыл бұрын
That's awesome! Dan and the team do great work, and I have been using them for years now. He has rebranded and the shop is called Right Now Power Coating. He also has a KZfaq channel, so if you into powder coating videos you should check him out.
@chrismilligan9696 3 жыл бұрын
@@PraskaBoysGarage I will do that.. I'm working on a chinese atv now for my nephew. I'm putting a 212 predator motor in it.. I enjoy watching your channel..
@sebastiansneesby5935 4 жыл бұрын
You’ve done a really great job on this build
@PraskaBoysGarage 4 жыл бұрын
Thank you so much!
@obs.vanness1604 4 жыл бұрын
Bout time I find a good pit bike video. Nice bike
@PraskaBoysGarage 4 жыл бұрын
Thank you!!! Glad you liked it!
@matthewreardon5694 4 жыл бұрын
Hot tip soo u don't punched tubes when installing them again use hot soapy water it makes the tyre alot easier to get on and off the it makes the tire a bit softer and the soap lubricates the tire. The tube put about 10psi in it it stops u from pinching your tube and using hot soapy water makes the tire soft and lubricates the tire for easy installing no screw drives needed to put the tire over the bead
@matthewreardon5694 4 жыл бұрын
Just push down hard on the tire and just be careful the tube doesn't get stuck under the tire
@PraskaBoysGarage 4 жыл бұрын
Thanks for the advise!
@esteslandscaping6947 3 жыл бұрын
You have the perfect sized shop!
@PraskaBoysGarage 3 жыл бұрын
Thanks, I actually think I'm starting to outgrow it. I really want to buy metal working tools but just have no place for them. Maybe someday, but for now I am very happy with what I have! Thanks for watching!
@royaltydavis6765 5 жыл бұрын
Nice I’m looking myself for one to build up and ride with my son and his 125 ssr good work
@PraskaBoysGarage 5 жыл бұрын
Do it man! This one was a blast!
@triniboybobb2332 4 жыл бұрын
I just found your channel and although you dont have alot of subscribers dont let that discourage you we all love the content man thank you
@PraskaBoysGarage 4 жыл бұрын
Thank you so much!!
@alsouthern7190 5 жыл бұрын
Awesome fricking job!! Looks great and thanks for posting and can't wait for another quad vid! ; )
@PraskaBoysGarage 5 жыл бұрын
Al Southern Thank you! I’ve got 1 more project coming and then it’s back to the atvs!
@likes6919 4 жыл бұрын
Yo you are a AMAZING Mechanic!! Keep up the good WORK AND YOU WILL BE ON TOP! BTW YOUR VIDS ARE AMAZING!!
@PraskaBoysGarage 4 жыл бұрын
Twitter Thank you so much! I appreciate your support!
@petrusmaatta2050 4 жыл бұрын
Awesome Job right there
@PraskaBoysGarage 4 жыл бұрын
Petrus Määttä Thank you!
@Gladiatorguy1998 3 жыл бұрын
Awesome job.
@PraskaBoysGarage 3 жыл бұрын
Thanks!
@stephaniekane7276 Жыл бұрын
I’m doing this with a 2007 Baja dirt runner 90 right now, sending the frame off to be sandblasted and powdercoated in the meantime I’m going to rebuild the top end , previous owner suspected blown rings
@georgemixalakis3724 Жыл бұрын
You got my interest from the moment the engine is looking straight not up
@kizza4208 4 жыл бұрын
When you found out the inner was punctured I felt that. I hate when that happens
@PraskaBoysGarage 4 жыл бұрын
I almost let it defeat me that day in the shop! Im glad I pushed threw it!
@kieranmurphy7659 Жыл бұрын
Great video really enjoyed watching 👀 I've learnt alot from watching this thanks ever so much for sharing 👍I'll be watching more of your channels to learn even more on projects thanks alot pal 😉👍👌
@thailandmopedadventures611 3 жыл бұрын
Great Job
@PraskaBoysGarage 3 жыл бұрын
Thank you!
@RealSuburbanCowboy 4 жыл бұрын
Next time, use some soap and water while mounting your tires, plus add a bit of air to the tubes. Excellent video!!!
@PraskaBoysGarage 4 жыл бұрын
I know time laps hides a lot of the details but I'll tell you, if I put any more soap and water on that thing I would have started a pond! I was using everything I had. The tires were pretty hard so I'm assuming they had some shelf time to them!
@RealSuburbanCowboy 4 жыл бұрын
@@PraskaBoysGarage LOL, nice!! Maybe you were just unlucky. It has been years since I pinched one. A couple of nice spoons and a bead buddy help too. Anyway, loved the video, and thank God for Amazon.
@bigbrotherfrank2960 4 жыл бұрын
great video! I ended up watching the whole thing.
@PraskaBoysGarage 4 жыл бұрын
BigBrotherFrank That’s awesome, thanks brother!
@ragingpatriot772 4 жыл бұрын
Seriously boss paint scheme.
@TJMADVENTURES 4 жыл бұрын
So amazing just bought a chine atv road legal needed some work and learning while I watch! Loving all of the videos! Keep it up!!
@PraskaBoysGarage 4 жыл бұрын
Thank you! Good luck on your project!
@shawahmed9849 4 жыл бұрын
Can’t Believe you popped so many tubes I mean it’s still a great video
@PraskaBoysGarage 4 жыл бұрын
Neither can I... I thought about editing it out and making it a smooth transition but it's a good lesson that sometimes even the simple things can be a struggle! Thanks for watching!
@sash328 8 ай бұрын
Once you put the new tube in, inflate it a little so it spreads outwards nicely away from the rim. And use a lot of lubrication. WD or similar.
@gamergirls9392 3 жыл бұрын
Little tip if you pinch your tube when installing it, instead of buying a new one get a bicycle tire patch and it will work great
@PraskaBoysGarage 3 жыл бұрын
Thanks, I think frustration got the better of me that day! I will remember that for next time!
@TheGreatBigShow 4 жыл бұрын
That’s a nice little shop you got there
@PraskaBoysGarage 4 жыл бұрын
Appreciate that! My flashback on snapchat has videos of me building it 3 years ago already!
@Dirty.3hirty 3 жыл бұрын
Just found your channel and i love it. i could feel the frustration when you found out that tube was popped. been through that process with my dad back in the day! i also have a pitster pro 140 with an oil cooler, you inspired me to go get it out of the storage unit!
@PraskaBoysGarage 3 жыл бұрын
Glad you found it and have enjoyed the content so far! Absolutely you need to get that 140 out! The perfect riding weather is right around the corner!
@santiagoelias6172 4 жыл бұрын
Dude..i'm so glad i subbed your channel..freekng learning while i'm entertained..digging how you knock out every obsticale that blocks your goal to complete this build...color scheme is awsome...
@PraskaBoysGarage 4 жыл бұрын
Santiago Elias Thank you so much! I appreciate the feedback! Glad you like the channel!
@chrisvillarreal2752 Жыл бұрын
awesome job I would highly recommend tucking that brake cable away to a safer routing location.
@thewildside7536 3 жыл бұрын
Omg dude, I love ur channel. I’m buying a Chinese dirtbike and wanting to do a rebuild. I’m only 14 so I’m hoping to do a lot more than just this one build. I’m inspired by u. Keep up the good work!!!
@PraskaBoysGarage 3 жыл бұрын
Thanks man! Good luck on your project and let me know if you have any questions!
@thewildside7536 3 жыл бұрын
Thank u so much for taking the time to respond. The bike is a Baja dr 70. I plan to completely redo everything on it, I don’t have any questions right now but I prob will. Again thanks so much for responding. Stay healthy and keep up the good work!!👌
@speedyboi349 4 жыл бұрын
This takes a lot of time and effort This work is art man👍
@PraskaBoysGarage 4 жыл бұрын
I appreciate that! Thank You!
@speedyboi349 4 жыл бұрын
@@PraskaBoysGarage 👍
@ancientofdays9737 2 жыл бұрын
Thank you 🙏
@AlexHD 5 жыл бұрын
Amazing Work!!
@PraskaBoysGarage 5 жыл бұрын
Alex HD Thanks brother!
@ragingpatriot772 4 жыл бұрын
This is more my speed. “Made in China, MODIFIED in the USA!”
@orlondootero5350 4 жыл бұрын
SSRs are made in the USA
@r.i.parthurmorgan5168 3 жыл бұрын
@@orlondootero5350 nope
@billlatimer3655 Жыл бұрын
Try less air in the tube when installing and use dawn dish soap as a lubricant between the tire and rim
@smk_adlay9222 4 жыл бұрын
I barely comment on videos but this video is well put together and i really enjoyed it, well-done man keep up the good work 👍.
@PraskaBoysGarage 4 жыл бұрын
SMK_ADLAY Thank you very much! I appreciate the support!!!
@MrRushvd10 4 жыл бұрын
This was a great video just like the rest of yours. Glad I found your Channel. You have inspired me to find a project bike and do the same. Thanks man and keep up the awesome content
@PraskaBoysGarage 4 жыл бұрын
scott smith Thanks brother! I appreciate the support!
@Sparkle_2002 5 жыл бұрын
yay i was waiting for this one !
@PraskaBoysGarage 5 жыл бұрын
Most shop hours on a project to date! Worth it!
@gunsandhorsepower 3 жыл бұрын
I'm soo excited I made a purchase today i bought a 05 Honda trx 450r and my o my I should have done it sooner
@PraskaBoysGarage 3 жыл бұрын
Those are nice quads man! We had a TRX 250X before and we ripped that thing a lot!
@kanogomez5063 4 жыл бұрын
I use bicycle tube from Walmart the one with the lime inside...just into new ones comed in the mail...and they work good
@PraskaBoysGarage 4 жыл бұрын
Good deal! Glad it worked out
@eoindarcy4374 3 жыл бұрын
Such a talented guy I wish I can I do my bike like that
@PraskaBoysGarage 3 жыл бұрын
Thank you!
@TheRoadhammer379 3 жыл бұрын
You can, time, patience, paint and accessories and your own creativity.
@ahmadsalim4463 5 жыл бұрын
Keep it up brother
@PraskaBoysGarage 5 жыл бұрын
Thanks man!
@madjax777 4 жыл бұрын
Dude I just wanna tell you your videos are really good. Really informative really smooth transitions just all around quality video style. And your rebuilds of the bikes are just great. I just found your videos yesterday and subscribed immediately you were at 1.6k and now you’re at 2.2ish and growing. Keep up the quality videos and have fun on the grow spurt you’re about to go through lol.
@PraskaBoysGarage 4 жыл бұрын
Thanks man! This video has blown my expectations already, I appreciate your support! Thanks for the sub!
@spymaine89 4 жыл бұрын
thank you
@jameswisecarver 3 жыл бұрын
Good looking bike I dig the graphics
@PraskaBoysGarage 3 жыл бұрын
Turned out pretty good! They haven't held up over time but that just gives me an excuse to do them again.
@jameswisecarver 3 жыл бұрын
Right on did they fade out or peel off?
@itsbroster21channel Жыл бұрын
Need to see u ride these projects
@claytonharapela1460 3 жыл бұрын
I love this
@PraskaBoysGarage 3 жыл бұрын
Thank you!
@ragingpatriot772 4 жыл бұрын
This was a great build.
@TBoltUSA 3 жыл бұрын
Good video !!
@PraskaBoysGarage 3 жыл бұрын
Glad you enjoyed it!
@daverabe229 4 жыл бұрын
Great vid
@PraskaBoysGarage 4 жыл бұрын
Thank you! Glad you liked it!
@michaelblackler4676 4 жыл бұрын
really great video. keep up the good work
@PraskaBoysGarage 4 жыл бұрын
Michael Blackler Thank you brother! 🙏
@jamestuckwell4621 4 жыл бұрын
also when you put inner tubes and tires on rims use fairy liquid in hot water it makes it so the tire and tube go in easier
@PraskaBoysGarage 4 жыл бұрын
Thanks for the advise! I've never used that method before so I will have to give it a try!
@chuckscustoms674 2 жыл бұрын
Liked your video, I’m well aware this an older video and I’m sure it’s been said already but I think the spacer is a round aluminum/steel tube roughly an inch long or smaller that goes to the left of the brake caliper, thus putting the caliper up against the frame when you tighten the rear nut. Hope this helps next time.
@sayerharhar963 3 жыл бұрын
I have a taotao 125 db17 that I'm rebuilding and it is a beast cool bike I subscribed to your channel, your videos give me some sick ideas for my bike keep up this sick work
@PraskaBoysGarage 3 жыл бұрын
Right on! Make sure to vote on the poll I posted yesterday! Thanks!
@katonhellenthal576 4 жыл бұрын
Anyone who dislikes is jelous 🤷🏻♂️😂 I mean they have no dirt bike and they want one or they have that 50cc 😂
@PraskaBoysGarage 4 жыл бұрын
Thank you for the support! I'm not everyone viewers cup up tea, and I have accepted that the thumbs down comes for tons of reasons. My plan is to keep doing what I enjoy and share it with you guys that want to see it!
@lkoz5800 3 жыл бұрын
Good job buddy! But i noticed you had a couple Japanese atvs in the back round lol. Thanks for the content 🙏
@PraskaBoysGarage 3 жыл бұрын
Hey thanks Leonard! Yes, we have a little bit of everything. The boys daily ride their Raptor80 and a RZR170. Basically if it's motorized and made for Youth riders I work on it!
@vedderman123 4 жыл бұрын
I wish you were my next door neighbor! I would invite you over for bbq's and try to trick you into helping me with my chinese quads. Lol Thanks for the videos!
@PraskaBoysGarage 4 жыл бұрын
Man, I tell you I'm a sucker for some good bbq! I'd probably start breaking your stuff on purpose so I'd have an excuse to come over!
@vedderman123 4 жыл бұрын
@@PraskaBoysGarage 🤣🤣🤣
@heathdoesbeca 3 жыл бұрын
Wow you’re good, my idea of a restoration involves air in tires along with a hose down 😳
@PraskaBoysGarage 2 жыл бұрын
Lol, thank you!
@afkgang5076 4 жыл бұрын
Braaa thts raw asf
@PraskaBoysGarage 4 жыл бұрын
OGxB Aim Thanks brother!
@casonbaumgartner8189 4 жыл бұрын
Dude you're insane I revive old hondas from the dead but their cake compared to what you go through👍
@PraskaBoysGarage 4 жыл бұрын
Ever a Honda Trail50? Those things are awesome!
@casonbaumgartner8189 4 жыл бұрын
No mainly ATCs I love my 1983 atc70 its fast as is and I'm debating on putting my Lifan 125 crate engine in it.
@PraskaBoysGarage 4 жыл бұрын
@@casonbaumgartner8189 I had an ATC 110 in my storage shed for years and never touched it. Eventually sold it to make room but I hope to restore one someday!
@robinfugate7876 4 жыл бұрын
Nice work
@PraskaBoysGarage 4 жыл бұрын
Thank you!
@myass5964 3 жыл бұрын
@praskaboygarage heat up the tire in the oven and it slips on, only telling you that because I really like your channel and hope that helps
@PraskaBoysGarage 3 жыл бұрын
Thanks! I don't think my wife will approve, however if I get an oven for powder coating I could use that.
@masafn816 5 жыл бұрын
I haven't watched this video yet but I know allready that its really good ! :)
@PraskaBoysGarage 5 жыл бұрын
It's my favorite so far! Was a lot of fun, I hope its worth the wait!
@masafn816 5 жыл бұрын
@@PraskaBoysGarage yeah, this was amazing!
@christiandegraw2066 4 жыл бұрын
Good frame work but I wish you would of done an engine rebuild, that's what I'm doing on my bike. But good job man
@PraskaBoysGarage 4 жыл бұрын
Thanks! I'm currently looking for a motor that is in need of a rebuild for the channel! Are you doing a top end or bottom end rebuild?
@thegarage5919 4 жыл бұрын
Shouldda polished the crankcase . Would have looked badass.
@PraskaBoysGarage 4 жыл бұрын
I just ordered a mikuni carburetor for it last week! That would look nice!
@nonya1940 6 ай бұрын
Reminds me of the 90s GT Dyno
@troyaldridge9773 4 жыл бұрын
You should try to put a little bit of air into the tube before you put the bead back onto the rim that way the tub isnt just laying down flat and twistred and shit just what i learned one day giving blood to the knuckle gods
@PraskaBoysGarage 4 жыл бұрын
Lol, yeah I think I tired a little bit of everything! It just wasn't my luck that day.
@wyatthale1934 4 жыл бұрын
U gotta let ur boy ride it man
@PraskaBoysGarage 4 жыл бұрын
33gang_hightech Xboxgang My oldest doesn’t now how to use a clutch yet but next spring he will definitely get some practice in!
@jaydindavies9571 4 жыл бұрын
I have this exact pitbike I'm currently restoring
@PraskaBoysGarage 4 жыл бұрын
That's awesome! Good luck on your project!
@paddykelly3095 4 жыл бұрын
Hello I'm from the UK, Currently looking into Buying a stomp 125 pit bike off my friend but it's basically brand new, may start buying cheap projects in the new year to flip
@PraskaBoysGarage 4 жыл бұрын
Do it! The parts are cheap and they are easy to work on!
@PapiAldoDiaz 4 жыл бұрын
i just got into riding and bought a lil 125cc and man ive popped like 10 tubes! hahahaha i feel your frustration
@PraskaBoysGarage 4 жыл бұрын
Tell me about it, the struggle is real! Trust me, if this wasn't a DIY channel I would have paid someone!
@ronaldmajette8154 4 жыл бұрын
Thatz a guud 1 niccee jobb bro
@PraskaBoysGarage 4 жыл бұрын
Thanks!
@jonathonmoore2921 3 жыл бұрын
the spacer for the back wheel goes in between the tire and brake hub. hope that helps
@PraskaBoysGarage 3 жыл бұрын
Thanks!
@karlcook8322 Жыл бұрын
The valve core on tubes. are loose the dust cap has built in tool for it
@setajrvui1152 4 жыл бұрын
Super dope 👌👌👌👌👌👌👌
@PraskaBoysGarage 4 жыл бұрын
Thank You!
@octanemayhem2686 4 жыл бұрын
That's cool but I'd black all the white stuff. Then it would be a 10.
@PraskaBoysGarage 4 жыл бұрын
Octane & Mayhem Black and red is my favorite go to color combo. Looks good on everything!
@tlodm600 4 жыл бұрын
Dang bro, you deserve way way way more subs
@PraskaBoysGarage 4 жыл бұрын
karts and mini bikes Thanks man! I’m about 10 months in and I can’t believe the support I’ve already received! I’m glad I can bring you guys along with me in my shop!
@tlodm600 4 жыл бұрын
Praska Boy's Garage yeah no problem man! I just wish I could do the stuff I’ve seen you do on your channel! You are amazing for how small your YT channel is! Just subbed love the content, reminds me of 500k+ sub channels
@PraskaBoysGarage 4 жыл бұрын
karts and mini bikes This is exactly what keeps me motivated! Thanks brother!
@tlodm600 4 жыл бұрын
Praska Boy's Garage yeah bro keep up the amazing work! Hope to see this thing getting ripped around in the next vid 🤙🤙
@justdigitprospecting.3952 7 ай бұрын
no like button so here is mine . LIKE
@RmFm59 3 жыл бұрын
RESTORATION DE MINI, OBLIGÉ DE CLIQUER 👌👍🏻🏁💨💨
@PraskaBoysGarage 3 жыл бұрын
Thank you
@RmFm59 3 жыл бұрын
@@PraskaBoysGarage Good job👌👍🏻
Кушать Хочу
Рет қаралды 7 МЛН
Praska Boy's Garage
Рет қаралды 281 М.
Кушать Хочу
Рет қаралды 7 МЛН