Precious Plastic - How to finish objects from recycled plastic (part 5.2)

Рет қаралды 501,938

6 жыл бұрын

In this video we will show you the best ways how to finish your objects made from recycled plastic.
Support us: support.preciousplastic.com/
💬 Join our Discord chat for questions
/ discord
📓 Visit our academy for all information and downloads
community.preciousplastic.com...
Or watch all videos below 👇
1.0 Introduction
cutt.ly/AfsZjEf
2.0 The basics of plastic
cutt.ly/6fsZkeg
2.1 Safety and plastic fumes
cutt.ly/yfsZknr
2.2 Going nerdy on plastic
cutt.ly/efsZkPm
3.0 Building machines
cutt.ly/ofsZkCk
3.1 Build the shredder
cutt.ly/0fsZlqU
3.2 Build the extrusion
cutt.ly/kfsZlks
3.3 Build the injection
cutt.ly/pfsZlJo
3.4 Build the compression
cutt.ly/ffsZzfa
3.5 Build the PRO plastic shredder
cutt.ly/0fsZzA5
3.6 Build a PRO plastic extrusion
cutt.ly/qfsZz4o
3.7 Build a PRO sheetpress machine and make sheets
cutt.ly/BfsZxfN
4.0 The worldwide problem with plastic recycling
cutt.ly/XfsZxTf
5.0 Create things from plastic
cutt.ly/CfsZxVl
5.1 Good design with recycled plastic
cutt.ly/gfsZckW
5.2 How to finish objects from recycled plastic
cutt.ly/EfsZcPg
6.0 How to start a business with plastic recycling
cutt.ly/wfsZc3h
6.1 Here is our tool to calculate your profit
cutt.ly/9fsZvur
6.2 How to make a businessplan on plastic recycling
cutt.ly/IfsZvm1
7.1 Setup a shredder workspace and shred flakes
cutt.ly/RfsZvXg
7.2 Setup an extrusion workspace and make plastic bricks
cutt.ly/nfsZbQ1
7.3 Setup an injection workspace and inject plastic
cutt.ly/ffsZbLw
7.4 Setup a plastic sheetpress workspace
cutt.ly/OfsZb7E
7.5 Setup a mix plastic workspace
cutt.ly/yfsZngp
7.6 Setup a local collection point
cutt.ly/HfsZnUk
8.1 Build a Bio Press #beyondplastic
cutt.ly/YfsZnCl
8.2 Make an edible bowl #beyondplastic
cutt.ly/MfsZmWM

Пікірлер: 285

@Alex-xh1zi 6 жыл бұрын

Would love to see how you made the tusk or rock in the background. They look amazing.

@stefanhertweck 6 жыл бұрын

In case that it is not suggested yet. I recommend to add a shaft to the coin so that it can be attached to the soldering stick. That makes the process more robust, easier to handle, and it will improve the heat transfer.

@RobMacKendrick 6 жыл бұрын

With the shaft you suggest, you could also heat several coins together on a hotplate, allowing you to stamp several pieces quickly rather than waiting for a single coin to heat up after stamping each one.

@dr.nug7103 5 жыл бұрын

He wants it to be a thing anyone can do.. not everyone has a soldering iron.

@TheRebelmanone 2 жыл бұрын

@@dr.nug7103 Not a big deal, if they are knowledgeable enough to build or buy, and operate precious plastics machines making products out of recycled plastic then they can certainly figure out how to buy and operate a soldering iron. It only cost like $40.00 for high wattage iron. Any one of those precious plastics machines will cost into the $1000 and higher, $40.00 more is nothing in comparison. He even used a soldering iron what else do you want, that is why he said he likes to use the solder iron, it is cheap way to heat it that anyone can do and have access to. They sell them everywhere. lol I wouldn't recommend using a torch to the people because it is an open flame, that is why he suggested the solder iron i suspect. But the first thing the common man would grab in this instance is the torch. You can heat it in 3 seconds.

@TheRebelmanone 2 жыл бұрын

Exactly what i was thinking, he had to use pliers to grab it. lmao

@dr.nug7103 2 жыл бұрын

@@TheRebelmanone very true

@redapproves1330 5 жыл бұрын

I've collected many used plastic containers intending to make something out of them. This video is a great inspiration to get started!

@philpique3187 4 жыл бұрын

I am so impressed by this! Thank you so much for posting - I hope to try this myself.

@robertbarr8001 4 жыл бұрын

All new to me - another new world revealed by KZfaq. Extremely interesting and some fantastic products from recycled material. Thanks!

@zestygurl 5 жыл бұрын

Really love those rocks. Nice work on your techniques.♡ Thanks for sharing.

@viefgi 6 жыл бұрын

I didnt know there where so many types of plastic and the particular characteristics of them. Great info.

@nikkivieler3761 6 жыл бұрын

Using/ pressing warm glass makes it very smooth too ;)

@Diego-uq5yy 6 жыл бұрын

Awesome dude. Thanks for all your efforts! Pura Vida!

@gsambolin 3 жыл бұрын

This is some of the best video making I have seen. Straight to the point no nonsense. Thank you, you have a new sub.

@ScrapwoodCity 6 жыл бұрын

Really cool info

@petergregory5286 6 жыл бұрын

Thank you again Dave. I really enjoy watching you going through all your processes and the way you explain them to us. I was thinking about the whole idea of winning this battle you have with the plastic manufacturers and the consumers especially those who don’t have access to your videos. The point is that a manufacturer is probably producing more plastic in one batch than you and your associates can possibly reuse in a year. This really disturbs and disappoints me on behalf of my grandchildren and great grandchildren. Regards.

@quickie3 6 жыл бұрын

dave you are an inspirational person and rapidly becoming a legend ., I'm an Artist mainly sculpture and love the rocks that you are created will you be so kind to show us how you build them., keep up your wonderful work., cheers from New Zealand.

@ronisilva4477 2 жыл бұрын

Cool,great job!

@clement583 6 жыл бұрын

I find that a handplane works really well for edges

@crdiyrepair 4 жыл бұрын

Nice work. Inspired me to do it at my workshop. Thanks

@blueyali4218 6 жыл бұрын

thanks a lot you really helped me in every video you make

@JoseGToyos 6 жыл бұрын

Awesome projects....I really love plastic products

@marko176schneider5 3 жыл бұрын

Super Video.Danke!

@jommeissner 6 жыл бұрын

You must be the Superhero of plastic recycling, everything is super😉

@vankumarsingh6133 3 жыл бұрын

Thanks for giving us so useful information n tricks about to finish plastic products

@clayscreations9300 4 жыл бұрын

I do the same technique with the razor blade on gun stock refinishing it works on the wood really well

@hebrewhammer1000 6 жыл бұрын

Thank you for sharing!

@YuriFurry 6 жыл бұрын

Hey I just started learning machine construction for plastic extrusion last year. Im still pretty young and don't know much but I think the precious plastic stuff is really cool. :D

@capnskustomworks 6 жыл бұрын

That's beautiful, brethren. I'm glad I saw it.

@xsbiggy6349 6 жыл бұрын

You can also flame polish the surfaces of he softer materials to get a nice shine. Takes a little practice but it works

@user-se1bt6iq3m 4 жыл бұрын

Gooood man!

@Lobzik67 6 жыл бұрын

Great guys! Thanks.

@Wyrmwood66 2 жыл бұрын

I would love to have a go at making a piece. I used to work in a factory that made car parts, shower head parts and numerous things from plastic but nothing you would really want to take home. I seen a coaster made of the recycled plastic that would work nicely as tiles on the wall or floor. I just think it is cool that you could make anything.

@craigtate5930 5 жыл бұрын

Love your work

@GermoV 2 жыл бұрын

I like the marking coins. If you add a little shaft to it you can handle it better, or even assemble it on the soldering iron for easier handling

@goofyvids2978 6 жыл бұрын

I love this channel.

@zinc438 6 жыл бұрын

Hi Dave, thanks for your info: one very basic question about the "homemade moulds" / which metal are you using for making them?

@stanislav0803 5 жыл бұрын

Вы делаете очень большое дело! Благодарю!

@jonathanrodas6557 5 жыл бұрын

Me encanta..que bueno es tu trabajo.

@kercchan3307 5 жыл бұрын

ABS also reacts to acetone, I have used this method to smooth out ABS 3d prints/projects. A warning if you use acetone on ABS make sure you have a safe surface or hanger system on a non exposed surface.

@unitauni 4 жыл бұрын

Great!! Thanks a lot!!

@svzigzag5898 6 жыл бұрын

Great ingenuity

@happybushawaii3704 6 жыл бұрын

you are a genius

@pIacehoIders 6 жыл бұрын

They. Are. So. Pretty.

@newdogatplay 5 жыл бұрын

good work my dude

@Martin71209 6 жыл бұрын

You could also acetone vapour bath things made from ABS as it gives a very smooth surface

@malaswarnkar9593 5 жыл бұрын

It is nice method for finish the plastic and nice method for use.

@adamkwiatkowski4107 6 жыл бұрын

can you show some products made from used plastic water/soda/juice bottles. Thx

@adamleehowarth 5 жыл бұрын

I have always wanted to make life size lego blocks for building real houses. This would be perfect.

@DolezalPetr 6 жыл бұрын

now this is art

@TheTurboman2 3 жыл бұрын

I might suggest that your thermal stamping be done by silver soldering each coin onto an inexpensive soldering iron and now you have an easy to use handheld tool for each stamping you require. The silver solder has a much higher melting point but would make it a lot safer, faster and easier to stamp your products.

@anthonycampos9125 5 жыл бұрын

Good job .

@hijeans1103 4 жыл бұрын

I used to be in plastic recycling. This guy has done well in a lot of respects. However he would really benefit from apply certain techniques from injection molding.

@eddiehall282 5 жыл бұрын

Quero fazer esse projeto aqui no Rio de janeiro !!!! Muito bom tenho várias idéias com essas máquinas!!!!!!

@nestorgarcia5337 3 жыл бұрын

Excelente video, muy bueno

@maridepaula4980 2 жыл бұрын

Olá!!! Maravilhada com os projetos apresntado por vocês, transformando resíduos em excelentes produtos resistentes 👏🏿👏🏿parabéns a todos os envolvidos...

@thiagomariano3838 Жыл бұрын

Eles são incríveis. Comecei a reciclar plástico recentemente por conta deles.

@oetken007 6 жыл бұрын

Great Projects! The rock in the background looks interesting. My first thought was that it looks something like "Tiberium" :-) Why not welding the coins on a tip and mount it in the iron. So it will get up to temperature much quicker and the handling will be nicer too.

@asimbangash1986 4 жыл бұрын

Superb video

@Crits-Crafts 6 жыл бұрын

wow, how long did that "rock" take to make? I'd love a set of them for garden decorations :D lol

@nathancawet7459 5 жыл бұрын

Incredible

@rockein 2 жыл бұрын

those are so beautiful they even look expensive

@HLCraftIdeas 2 жыл бұрын

Your video is good idea, I love your Idea

@iyanasimpson821 4 жыл бұрын

Beautiful

@honestinsincerity2270 5 жыл бұрын

I guess you could say with those coins you're really gonna CHANGE the plastic community!! Change!! Get it?!? GET IT!!?!?!

@kendarr 5 жыл бұрын

Mineral oil is great as mold release, i use car mineral oil just because it's what I have in hand

@Thonss 6 жыл бұрын

Goed bezig!

@arnauddavid7221 6 жыл бұрын

Hello, I'm French and I'm in love into your way of recycling plastic! I'm thinking you can gain some time if you put your coin stamp on a iron solder?

@hosenzwen2258 6 жыл бұрын

THANK YOU

@catmechanic1261 6 жыл бұрын

Go Dave..! If you had a CNC Mill you could make molds very fast, thus quicker to market. Keep thinking up good everyday ideas that everyone uses...Plastic can be remade many times. 3D Printing Filament is another...you build things with a 3D printer also. Bravo for your efforts. If I lived closer, I'd come work for you. ;-)

@Koenzie83 6 жыл бұрын

You can make a soldering irron tip on the underside of the coin to make it fit a soldering iron to make it easier to handle

@jimgreene4923 5 жыл бұрын

To add your product, add removable dye cast lettering & it could imprint into the side of the product.

@Jesse__H 6 жыл бұрын

"Welcome to a new preshplastic video!" XD

@TeamMayku 6 жыл бұрын

🙌🙌🙌 NIIIIICE 🙌🙌🙌

@conmigotodosalebien6203 5 жыл бұрын

cool explicacion

@jaredmay4620 5 жыл бұрын

Perfect to make a floor similar to a marmol, with a litle layer of epoxy, shiny and fancy .

@MSNERVANA 6 жыл бұрын

Heel Heel geod ........... Ik vind het prachtig .......... ga maar door

@sneeking2487 6 жыл бұрын

do you have a video of making that very large awesome sculpture in the background?

@christophertolhurst4918 4 жыл бұрын

I love you. Nice video, thank you. Peace

@mychannel4285 4 жыл бұрын

Hi Dave, I'd like to see an overview of the plastic recycling mechanism.And if it is possible to dissolve plastic I'd like to know in what solution. Thank you.

@mindblah 6 жыл бұрын

I'm curious, would freezing the softer plastic make it any stiffer and easier to get smoother using the techniques you used for the harder plastics?

@thombaz 6 жыл бұрын

As I know, yes. But as you start sanding it It's heats up in some seconds.

@anastaciazara1787 5 жыл бұрын

Some types of plastics become very brittle when frozen. Idk which ones.

@SiMoNe-td1cm 4 жыл бұрын

How is that vase in the background made!? it looks amazing! is it molded in 'freehand' or is it molded over something else?

@lukedominicodonnell2347 6 жыл бұрын

Dave you need to do something about your site! I went to add a pin, joined / loged in and went somewhere all together different to the map to pin.

@aavalos310 6 жыл бұрын

What production methods would you suggest for creating thin plastic sheets for vacuum forming applications? Cheers!

@ramdaniboyarmytv Жыл бұрын

Terima kasih infonya brother, sangat berguna semoga diberi kesehatan & terus memberi inspirasi 🤓

@mariapaulagarces7174 4 жыл бұрын

Hi Dave!! I'm looking to set up an operation in my city. I would love to get in touch with you to learn more about how to set this up. I look forward to hearing from you :)

@casna7569 5 жыл бұрын

"it's very labor intensive but this is what we do with recycled plastic." I think this is one of the major issues we got solve to bring the cost down. Although I don't have a answer for the issue now, I disagree with "this is what we do with recycled products. We need more innovation to bring the cost down.

@fenrisnihilus3675 4 жыл бұрын

What if you want to recycle one of the made objects like the yellow bowl you showed. Can the shredder you show elsewhere shred that thickness?

@SurfenSpace 5 жыл бұрын

How do you figure out and then sort the specific type of plastic from your collected waste, PP, PE, ABS or Polystyreen?

@rice_man1M 5 жыл бұрын

Did you mixed any substance while melting the pastic

@kamrankhanfashion 6 жыл бұрын

Its time needed, how I can start plasticrecycling with or without you in rural India. Thanks

@theflamethrower867 6 жыл бұрын

To save time you could make it so the stamps are properly attached to the soldering iron and you just press the object on top of it

@jimgreene4923 5 жыл бұрын

As I've suggested add a line of flat ground markers to your line. You have an endless line of product.

@sebas2571 6 жыл бұрын

awesome vid! the scraping sound killed me though, headphone wearers beware! :D

@kendarr 6 жыл бұрын

On the flexible plastics you can use a heat gun to get it smooth and shiny

@LarissaTheBrave 2 жыл бұрын

i have a question, i am working on a design for an outside sculpture and i wonder if it is possible to use recycled plastic like hdpe on a large scale for a custom sculpture? it would probably have to be done in seperate molds, but i would love to hear your opinion!

@lucianofedericoacunasalaza644 5 жыл бұрын

Nice work do you make lineal plastic?

@nyaudio4216 6 жыл бұрын

Can we make a board (at 9mm minimum tightness) from plastic? In these case any tipes of plastic

@jesuseduardomoya8564 4 жыл бұрын

genio. sin palabras

@rustyfox2794 6 жыл бұрын

Love the 'coins' for marking the plastic, but couldn't find them in the bazaar. What category are they in? If you can include a link here it would be great!

@aloharay 5 жыл бұрын

you may have already considered this, but can the marking "coins" be made into soldering iron tips to allow direct stamping

@sfetterly6200 6 жыл бұрын

I want to make large panels of 3/4 inch thick plastic that would screw together to form a dome ... what's the best material and methods for doing large projects like this???