Beast

he had a vroc key and did not try raid on nvme with another adapter :(

do higher end gpu's such as 6700xt/ 3080/4070ti run on these systems

@@lanezduppy4217 Yes with the 950 watt psu you can run anything that physically fits. the 6900xt is a tight fit but it runs great. An absolute powerhouse

Will the rx 6600 work on this motherboard

They fairly quiet depending on how you use them. For example: we edited and rendered a few videos and the t5820 was almost silent. We then ran some graphic and cpu intensive games, and we could definitely here fan noise trying to keep the system cool. Nothing crazy though. Thanks for commenting!

The T5820 does get pretty warm when running modern games with an RTX 2080 Ti on max settings. A fix to this issue is to purchase a perforated metal side panel. The perforated side panels allow for more heat mitigation as well as the opportunity to add additional fans to the external part of the side panel. We plan on releasing some videos about this in the future. Thanks for commenting!

@@GreenPCGamerscom yessir, definitely interested in seeing this vented panel & fan added......

Any update on this video? I am very interested.

The T5820 only supports an SLI with these cards: RTX 8000, RTX 6000, RTX 5000, GV 100, GP100, P6000, and P5000. www.nvidia.com/en-us/design-visualization/quadro/sli-certified-systems-and-motherboards/

You could probably figure out a way to install 2 x RTX 2080. However, the T5820 won't allow you to configure those cards in an SLI. You'd be better off installing a single RTX 2080 Ti or a Quadro Card depending on what you use the system for.

We haven't found a suitable 3rd party upgrade yet. Mainly because of the unique heatsink configuration on the T5820. We plan to explore some of the Noctua heatsinks in the near future.

The card that was installed has a total power draw of 250 Watts. www.evga.com/products/product.aspx?pn=11G-P4-2282-KR

The Xeon boards don’t normally support the i7/i9 processors. Also, the i7/i9 processors don’t work with registered memory. We hope this info helps.

You'll be limited with the 425W Power Supply. You should try to upgrade to the 950W PSU + Cable harness. This will unlock the door to many more GPU's.

@@GreenPCGamerscom I just bought the 950 w PSU, do I need the cable harness as well? Looking to put in a 2070 super. Also I have the xeon w2102 cpu, should I be looking to upgrade that as well? Thanks!

A 3090 would work in a T5820 with the 950w psu and some mods on the power rails. The big obstacle is would be finding a version that fits in the chassis.

We've only tried installing 1.

Is it possible to install 2?

@@sobhanhemati8810 If you like to run two cards reliably there are higher models like the T7820 or the beast T7920 I believe both also come with 1400 Watt power supplies, which means they can run all the drives you want.

yes, you can.

Are you using UEFI or Legacy? We normally use Legacy.

​@@GreenPCGamerscom I was able to get it up and running. I'm not completely sure what the difference is between UEFI and Legacy. I believe that I'm using UEFI, there are so many options that can be enabled in the bios. I'm not really sure what each of them do. Is there a guide on setting up the bios? I'm sure there are things in there that should be turned off or on to try and get the most out of the computer.

SIFA do you have the 950w psu?

GreenPCGamers.com yes, though i ordered it later on. Originally had the 425

Look at time stamp 4:08. You’ll see the 2 x 8pin power adapters are clipped in to the front plastics of the chassis. (Bottom right corner of the shot on 4:08). They can be split to 6 pin if needed.

You'll have to locate the upgraded cable harness if you had upgrade the psu from the 425W.

@@sifagulkeser9291 I am like you. I upgraded to the 950 from the 425 PS. Which cables did you buy ?

It is. make sure you are using 75w of pclie lan as it has total 4 and 3 of them of 50w

Yes you can.

@@GreenPCGamerscom will I need a GPU bridge? and what about additional power? The pre-installed power 8-in/6-pin chords are being used by the first 2070 super.....will I need to install new chords for power to mainboard?

Yes

The T5820 will support Windows 7. You might have trouble loading Windows 7 on to an NVMe M.2 SSD because the driver support to recognize the SSD in the Windows 7 load manager is really bad.

No, the system boards has 10 Pin Power.

It depends on the mfg. Check the measurements compared to existing card to verify before ordering.

@@GreenPCGamerscomwill the mother board fit into a antec dark lesgue df 600 flux

yes, all intel xeon w line supported. if you have intel x series on this workstation, then go for that line up

Are you using the Dell 5.25" NVME Tray Kit?

Yeah, it hurts. Hopefully the chip shortage ends soon!

Hey Joe, you can pm us on facebook if you want.