This is a classroom demonstration of how to lash the valves on a 212cc 4 stroke engine, for more information about Panola Colleges' School of Energy Program use the link provided. www.panola.edu/energy
Пікірлер: 14
@Spacecruizer203 Жыл бұрын
thanks for doing the hemi version cuz i hav thee Ducar Solid info right here people
@ward261029 ай бұрын
This right here. I watched a couple of these videos. Others didn't explain how to make sure you're at the correct TDC. Or they tried to but it didn't communicate well. Now I get it. The TDC with no pressure on the valves. This is why y'all are great instructors. 🙂
@philliphall5198 Жыл бұрын
Good job Mr Hall
@greasyxxrick91324 ай бұрын
Bro thank you for the info!!
@plesadian3 Жыл бұрын
This is funny” let me show you” .. look Thru my arm .. lol oh geez ..
@ward261029 ай бұрын
Right? The camera needed a bit more elevation, for those of us that can't see through arms.
@philliphall5198 Жыл бұрын
I work on small engines all the time since I retired diesel mechanic but don’t know where or who has parts for them, can you help me with information ??? Thanks Mr.Hall
@frankgarcia4177 Жыл бұрын
I am having an issue with the 212 hemi not wanting to run with the choke off. I have cleaned the carb and replaced the idle jet. It runs and idles fine with the choke on. Any Ideas as to what could cause this?
@danielhall8907 Жыл бұрын
Fuel starvation, there is a fuel filter screen that screws into your gas tank where the hose clamps on. First run some Seafoam or Marvels Mystery Oil through the tank and see if that clears it.
@collinherrmann-yt8yh9 ай бұрын
still havin issues
@bradyanderson35874 ай бұрын
I had the same problem and I looked up a bunck of videos and found that I had a vacuum leak. Basically the carb wasn’t lined up with the engine right because I put an upgraded carb on the engine so I did it all myself. I took the carb off lined up the extension and it worked. You may also be running too large of main a jet
@MoHunnidzGunCollections3 ай бұрын
@@bradyanderson3587same shit for me but what carb were you using ? I’m using a pwk
@kylesyx84329 ай бұрын
Non hemi - can take a lil bigger valves ! (4mm I believe Non-hemi - has longer stroke ! (5mm)