Excellent review! I've been wanting someone to review this project for some time . Thank you!

I like the view of the polish through the microscope. Nice touch!

About Gyeon, I just buffed my boat gel coat and coated it with Gyeon Pure. The shine is outstanding. I know Gyeon has a gel coat coating but I had plenty of Pure after my MDX was coated and I had to try it. It does work well but I found a few places I scuffed afterwards. I wished there was a product that made gel coat more scuff resistant. I will see how it buffs out when I can get to it. Thanks Brian for all your vids. I always learn something. Thumbs up.....

I feel like you made this video just for me. Thanks for do what you do.

Excellent video as always 💎✊Always appreciate your dedication and effort you put into the channel 👍🏻

Great video, been waiting for this one for sometime.

Have to finish watching your video, before I go back to work on my Ram. Good video. Just what am doing. Did the wife's bright blue Ford escape titanium. Turned out great. Lvr403, Gyeon can coat, topped xtreme solutions poly sealant. WOW.

Another GREAT video!👍

Thanks Brian for all your reviews. maybe do a video on your top ten "get it now" products?

Gorgeous Vette! Gyeon has some good products.👍

Great review, appriciated it!

great video again buddy thanks. love the geek stuff.b well

I have some now. Used it today very nice.

Now I'm intrigued with this..after a mild cutting compound and before a coating.. skip the polish🤔..I like that😃👍🏼

I am going to try this one. Thanks B.

It could also cause blue staining on some paints, in my case it did on a solid white paint.. So just be mindful and check your section pass closely.. The staining wouldn't go away with gyeon prep and required fine polish (or a strong cleanser like DP prep) to get rid of it (lucky i had done half hood only).

You mentioned jeweling a few times in the video...would you be able to make a video on that, and possibly use a couple different companies products? Just a thought, if you have a chance. Keep up the great work and stay safe!

I'm like a kid in a candy store when I see what you do on these cars.

Great product!

I was told it's actually better to work the primer relatively hard. Due to the heat it will help the primer to cute better.

How’s the old red vette coming Brian? Thanx for the great vlog & information👍🤓🇺🇸

Nice thanks Brian

Beautiful C7!

Gonna use my flex polisher and lake country white pads. And LVR403, TO START.😎👍👍

That is one very lucky Corvette having you doing its detailing

Thanks for explaining about how stacking your coating on these base layer type polishes actually gives you the most out of your main coating. By the way I don't think they make that 1000ML size any more, only the 120ML. Getting my wife a new VW Atlas, any guess where that clear is going to fall on the hard, medium, soft scale? I know you said it's always evolving but just trying to save my self testing every Lake Country foam, eurofiber and megs MF pads I have.

Is there any video where you can show how to or what to use for IPA solution or exfoliation the pain before apply the product ..?

Can you share a photo after you coated the yellow corvette? I use Essence for similar but might try GYEON next reorder.

That's just what I am getting ready to do on my Ram. Lvr403, GYEON CAN COAT, AND MAYBE A CHERRY. STILL LOOKING FOR GYEON CAN COAT, BY ITSELF. nice to visit with you Bryan. Had to send a email to carzillia, as my phone plan won't let me call out of the country. Who knew.

Brian , kind of in a spot. Have a client with a brand new x6. The vehicle has 2 miles on it. And hands down one of the best paint jobs I've seen. There mite be 3 spots that need very mild fixing. So my goal was to use a low country yellow with gyeon primer and see if that gets the spots out. If not then use sonix. But I really want to use gyeon primer for the enhancement. However, I'm coating with ngc v3 . And everyone saying it won't stick due to the s1o2. I saw you use yours on it and had amazing results. Any advice I appreciate

Brian love your vids and detail page. What speed are you running your polisher at when applying the primer? And are you using an IPA after polishing? It says you don't need to if you wait 24 hours . I'm just wondering if usi g the IPA will affect the gloss.

Would love to try out gyeons stuff. Specifically their wax

Cant wait to try it , my car was coated and i need to apply a new coating always was garage kept i dont really feel with bare hand contamination do you think iron and tar decon would be enough? Best regards

Thanks Brian. This product looks like it is safe to use twice a year without fear of removing clearcoat. True?

Hi Brian, I’m still using angel wax perfect polish ( 5 ltr purchased ) do you think this is an optional alternative.....? I never tire of your calming voice. Love from the uk 🇬🇧

Would you recommend a "3 step" of cutting compound (Sonax cutmax) then finishing (perfect finish) then primer?

Great Video Brian and THANK YOU for posting! Can you help me understand how to obtain better “Clarity” in my finish? I have a 2018 Toyota Tundra magnetic gray color with no swirl marks what so ever, I invested in a panel light and I try to find swirls and there just aren’t any. But I wanted to take the paint to another level of gloss. I washed, clayed, and then used McKee’s 37 360 all-in-one with orange CCS Lake Country foam pads, set at speed 4 on my Maxshine M15 pro series ll polisher, using moderate arm speed with two passes using the cross hatch pattern. This was my very first time ever polishing, and it was a great experience, had a ton of fun doing it. The gloss is very nice, I can see my reflection pretty well, but it still seems some what of a “blurry” like glossy image, not real crisp, like it could have more “clarity” to it. For my next go around, what could I change in my arsenal to get better clarity in the finish? Thx again!

Hello, to make the most of the gloss you say not to pass more than twice, do you intend to apply the product on the pad, pass then reapply and go over again or two maximum passes on the same surface without reapplying the product?

Was going to buy carpro essence but since it's sold out here in Australia I'll get this instead.

Brian I was wondering have you tested Gtechniq CSL topped with EXO? What coating will be going on this car ? Don't like blue staining on the pad which is a con. Thanks

Thank you for the video, something that no one really talks about, how many pads did you use? It would be great to know in future too. How many pads for a particular stage. Thanks!

so can you use primer as a 1 step polish on its own? to get rid of some light water spotting, swirling and scratches?

How much of this product would you get through on a medium sized family car? I'm looking at the smaller product and it's going to be a yearly polish on my daily driven car. At least I'm hoping for 1 year with the combination of Primer, CanCoat and WetCoat topups.

I am thinking about using this product before I apply the luxury microfiber shield pro. I have a fairly new Hyundai Veloster, I want to have your opinion on what pad I should use. Microfiber polish pad from maguire? Or a black foam?

Brian please link that google doc here!!👍👍

Brian, Can you tell me how to deal with matte finishes. I have a car that has green gloss paint and a black matte hood decal. If I coat it (or use a sealant), won’t the black decal turn glossy? How do i protect this?

Helpfull ✅

Love your videos, I watch every single one. You said at first to wait 12-24 hours before coating then later you said you could do it in 15 minutes. Which would you recommend if coating with say Cquartz UK or Crystal Serum Light? I would assume 24 hours would be best but would 15 minutes be ok?

can you use this product to remove marring caused by clay bar

So are you saying that this could be used as a one step correction? Or just a finish after a correction? Or both?

Can you use DPC products on top of this?

Sorry for the late question but would you take this over Carpro Essence?

So Gyeon Primer can be used as a base layer for most ceramic coatings. Can that be said of most ceramic polishes? I have technicians choice ceramic polish which I used as a primer for their ceramic coating. Is it safe to assume that I could use that polish as a primer space for any ceramic coating?

Cant wait this vs rupes uno prime and protect

Can this be finished up with spray on Bead Maker?

IHi Brian! s it better than carpro essence? Which do you prefer?

Can graphene products top a ceramic primer?

Will this work with graphene coatings?

Would you recommended it on a Mazda 3 BP 2019? I want to do it with hand. And then coating with Gyeon can coating. I am n newbie never polish a car. But i am scare to destroy the clear coat😐

Hey Brian, any major differences between this and CarPro Essence?

when doing paint correction would 3d one with the euro fiber pad. work well with gm paint without marring the paint

What pad did you use, cutting or finishing pad?

Were do you get the applicator pads?

Brian I have meguirers ultimate wax that I put on my 2019 Altima in around August of 2019. I want to know if I can use dawn dish detergent to take off the wax so I can use turtle wax hybrid solutions polish and wax,

Dallas paint correction coating also?

Hey Brian. Just want to let you know there is another product than can be used to remove polish residue without the risk of marring the paint at all...........ONR (blue version without wax in it of course)!!!!

Thanks again Brian for this vidéo. Its similar product to carpro essence ?

I'll be coating my car with C.Quartz soon. Would I use Q2 Primer ou the Carpro Essence as this primer layer before coating? What's your preference Brian? Thanks a lot!

Nice video and review Brian, would you prefer this or something like CarPro Essence?

Will this stain black trim?

really nice. can you apply this with an applicator or will it need a da machine?

Jp in SD. Back to work.

Do you this product on a regular basis?

Hi Brian, how does this product compare to CarPro Essence? Is it a similar foundation?

I thought doing a panel wipe would remove the Primer and the idea was to not have to do a wipe.

I recently purchased a brand new Toyota 4Runner and want to prep the surface for a coating... BUT I only want to remove very little if any clear coat... how much clear will be removed when pairing with an ultra fine rupes foam pad and only 2 passes?

Brian early in the video you said you have to wait 12-24 hours after using these products before applying a coating. 3 minutes later you said you don’t have to wait you can coat 15 minutes after using the polish. Which one is it? confusing

Same companies say you dont need to use a panel prep after a primer polish before coating, others say absolutely have to use panel prep. In your opinion, after using a quality primer polish is a panel prep necessary?

Hey Brian, does this play well with Gtechniq Crystal Serum Light?

If you coat your car with carpro after this and then reload and it does not get wet in the first 24 hours but gets wet with rain after that will this affect the coating? I as as i want to try this but I don't have a garage. Tks

Is it advisable to just go over a car with this and apply a coating when replacing a dead coating?

Ok you say alcohol and water. 25% alcohol and 75% water. Is that all I need to remove the meguirers ultimate wax.

Would this be in the same category as angelwax perfect polish??

alberto is watching the video.today have to wait for dad snik snik.2 days try to clean use carbrite to protect the wheels

Can I pass it twice around, first time for correcting, then for finishing??

Comparison between this, essence, and TAC systems offering?

Wouldn't it be a bad idea to put a ceramic coating over a weaker ceramic product? Folks have always said put the most durable product down first to give it the best possible contact, not that I agree with this but more interested in your thoughts. I've always felt it didn't matter and liked to put on a carnuba based wax first, followed by a good sealant in order to offer more protection and extent the life of the carnuba under it. Apples, and oranges to a degree but the idea is more or less the same. Folks enjoy saying the carnuba will fail faster and as it does it would compromise the sealant on top of it accelerating the failure. I feel the sealant should be able to protect the carnuba based wax under it (since it's goal is to protect the paint and block UV) if it's strong enough to protect the paint from environmental exposure it should should suggest the same for a wax underneath. Which ultimately offers a higher level of protection, and water characteristics on the outside layer, protecting the added gloss from carnuba longer.

This, Essence or Sonax Perfect Finish before a coating (22ple)?

Just to be clear. You’re saying you have to wait 12 hours for the primer to cure before coating correct? I’d really appreciate your answer

Detailing indoors makes a huge difference. The illusion of a shining hood is in all indoor recording. These hoods have been waxed about 1,000 times.

Does Gyeon make ANYTHING that isn't awesome?

Those products like this geyon can be considered as a standalone or like an AIO beside as a.primer for coating ??

I do like gyeon, their products are too pricey for me, thanks brian

Sorry never mind I just watched it again

Waiting for the dogs, to tire out, so I can go back out and do my hand wash. Tough being a a puppy sitter.

Same as carpro essence?