it was awesome to meet you finally, i can't believe it took us this long to realize we live 15 minutes apart lmao. People are not ready for the stuff we're gonna make.

the guy who crashed into your 300zx on the supra as a sticker is the coolest funniest thing

I had such a dumb smile throughout the whole video. 😆 Thanks for doing what you do, Mike!

god I love soarers, shoutout marty for printing that whole ass rear wideybody

"Why you need a chain for your tractor" Brother, because we love our tractors hehe, went to highschool on a tractor when I was 16, that's just the life man!

The sticker on the Supra had me rolling 🤣

20:48 some of you may recognize this guy 😂

Nice rockauto stickers bro , my whole fridge door is covered. The clean kickflip over stairs with the nollie flip after 🔥

So glad to know things like this are happening. Regardless of your make and model, too many classic cars are slowly disappearing into oblivion. Keep these legends alive!

That's so cool! I've know about 3D Scanning and 3D Printing for a while, but using it for preserving the car culture is SICK. Cool video as always Mike!

I model steel buildings, design connections, and engi-nerdy stuff like that. I also do a little hobby 3D printing, so this episode was pretty awesome for me. I need to get one of those handheld scanners. Techno Toy Tuning used to buy parts there for my 86 SR5 Corolla before I sold it back in time.

I wasn't expecting an upload today but made my day better! Love the videos man keep it up!

Those 3D printed floors are hard af 🔥🔥🔥

This has been one of my favourite videos of yours. There is always time to learn something new! Thank you for collaborating with Ding Dong, I found his insta because of you, his soarer is so cool. Also how am I only just finding out you have multiple levels of KZfaq membership. I want to give backto you as thanks for how much you give to the community.

Love watching your videos, it brings me right to the 2000s era i didnt get to experience due to being in kindergarten haha all the skating and 90s car sruff and all that punk rock, amazing

Developer spray is used in the final step of an LPI (Liquid Penetrant Inspection). It soaks up the penetrant dye in the weld and highlights cracks and other defects in a weld. I actually try to avoid using LPI on aluminium weldments because the dye is such a low viscosity and aluminium is so porous that it makes the repair less than ideal.

You could get the wheels powder coated chrome, it looks very close to real chrome

Preservation and documentation is key! Props to doing it right

those sc doors will save ur life in a wreck, honestly whole car in general, mine took tree at 70 and we're both still around to tell the story.

Sick stuff. I'm really interested in the 3d scanning and printing. Sounds like if you have a model you can test different paint and decals for your car. I got other things I got to do first, but that's going to be on my mind for sure

My dude 🤟🏾I can't wait to see you slide that beautiful z32 one day

nothin better than watching a new PrizzaMike video at the end of a long day. i cant thank you enough for what you do. keep being awesome!

Bro you two need to link up for sure so i can buy stuff from both of you. I would love to rock some Prizza Parts made by Ding Ding Drift. Cant wait to meet you brother Mike!

I'm so hyped for the Gloria video❤️👌

Wheel soulutions in California does rechromes. The chemicals used in the stripping and plating process is illegal in most places except California, turn around times are slow but they come out nice!

just made my day, 25 minutes of good entertainment, thanks dude!

The developer spray is for penetrate testing. I do this for work. You use it to find cracks in welds. Youd clean the surface, speay red dye on, let it sit and soak in for 10 minutes, then you clean that off with a dry rag and sprat on the developer. Let that sit for 10 minutes and if there are cracks youll see the dye bleed out. I do this for work at the oil refineries

Love the outro video and song, caught myself playing Used to you while working on my 240. Thanks Mike for giving me the motivation to keep working on my project whenever I feel like giving up.

Ding dong is the man!!

So sick to see you hanging out with Marty, need to see more sc content

its awsome that your preserving a piece of bomex history

Perfect timing! Just sat down 😌🤙

As always. Great fun and interesting ! Thank you !

Always love the mike skating clips, he's dope with it need some more.

Omg its soo cool!! I cant wait the next video✨🤟❤️

If you had a 3D printer, essentially you could make multi size wide arch sets for any vehicle ! All you need is a few different arch size measurements and panel fit measurements, you'd make a absolute fortune with international availability for any style arch kit, like GTR arches, M3 Hartge arches etc

Hell yeah Mike! Great progress during winter.

WOOOOO big fan mike ready for the video my guy!!!!!

Ooh snap, being able to 3d scan and print stuff is gonna open up so many new possibilities!

This is such a cool thing. Absolutely loved this video. The 3D printing stuff is sweet!

Perfect timing for a upload

I really enjoy your videos. Your z32 build is very inspiring. Im pretty jealous with all the projects and fun you have throughout your videos

absolutely amazing man! Love all of your uploads

Was so happy to open youtube to see that you uploaded…on a WEDNESDAY!!

Ain’t gon lie I love putting your vids on before I go to bed

Ive been watching for awhile and all i gotta say it please keep going,you came way to far.

It's awesome that you're 3d scanning the parts to preserve them! I've been trying to save parts like that using photogrammetry since those 3d scanners are very unaffordable for most people, and photogrammetry can be a good alternative tho more difficult to do ofc. 3d printed car parts are definitely the future

You for sure need to do the scan on the fresh in the box from Nissan rear quarter for the s13. Big fan of th3 240zx. Hope to meet you someday Mike

Wow that’s enjoyable to watch good work

The parts/designs 3d printing is going to give us over the next few years is going to be awesome.

ALWAYS THE BEST VIDEOS. MIKE NEVER CHANGE BRO

When you paint your 240 you should get some decals of the blue tape to do lists on the side cuz they are super iconic now! you could even put patreons on there instead.

That 3d printing and scanning stuff is awesomeeeee! I wish someone would 3d print a replacement set of windshield inner panels for the 240sx convertible because by now there are like none left or they are all cracked (mine included).

you have so nice friends and people around you, love these vibes, hell ya

Your vids have convinced me to try and get a ZX over a 350Z. I know it's heavier and not as good for drifting, but it just looks magical.

I didn't know they have printable polyurethane now. 😮 Can finally say goodbye to fiberglass parts

Dude you make that look so f****** easy man you are awesome you're an awesome skater

Great, as always

Can’t wait to see more progress on the 3D modeling stuff you and ding dong have got going on I think 3D printed body kits are going to be the new wave especially for situations like the bomex kit where you can’t buy them anymore

Holy cow that's awesome a PizzaMike video in the middle of the week ..no way this is so cool . I to have been buying a Z

I just finished your last video! Hell yeah, back to back. Today is a good day 😂

Awesome video bud!!!

Dude his car is like so sick I love it man that thing is cool as s***

I smiled like a idiot 24 min! Best content on youtube!

Loved the skatesesh!

Amazing video!

Hell yeah KA24 + T it’s gonna be sick

dude you’ve gotta live within an hour of me i’ve been to the asylum a few times and you went to rockford speedway which is my hometown track. i’ve been watching for a long time hoping to meet you some day, keep it up man❤

I’ve been watching you videos for a few months, and you got me to love car and watching ppl build cars and got me into rc drifting. I love your videos ❤ ps do a rc vid

3d printing is the future happy 3d printing is getting more light

Man it’d be so cool to have a scan of my car, and a scan of a 1/10 version of my car already scaled to fit a 1/10 rc drift chassis. Being able to print a full bomex kit for the RC body is so awesome

I wasn’t expecting a video today happy surprise

Cool tool box!!

Ka-t gonna go crazy

this is sooooo insane ❤️❤️

great video homie !

cant wait for the next 300zx video

I Love the Korn T Shirt

I have a minature replica of my z that was 3d printed... its a really cool technology. Alot of z owners have taken advantage of it .... theres files to print a cupholder btw!

3D printing for car parts is so sick! I have Advan SA3Rs but I didn’t get the center nuts/disc/coin. My buddy 3d printed the discs and nuts for me. Another friend had a 3d printed Trueno grill for his ae86

i just bought a hardbody and i cannot wait for more ka content. very underrated engine

bro's drinking kvass, was not ever expecting to see something as baltic as that in a prizzamike video xDDD

If you want to preserve body kits you would need someone who is really good at surface and organic modeling, they can easily make anything from thin air. These types of creators generally aren't familiar with turning their organic models into models a slicer (3D print software) or into a CAD model that you can then define its parameters. The moment more people are able to turn organic modeling into models that can be printed will be when there's no such thing as anything being "lost" you could create body kits from just reference pictures regardless of availability of the physical kit. This is finally going into the right direction, remember the purists who didn't even own a car telling you how 'bad' 3d printing JDM parts is? Glad we've finally matured to 'how about they just not existing at all and we need to fix that'. If you're an organic modeler and you want to dabble into this type of stuff but don't own a 3D scanner, you can find video game files of cars that were professionally 3D scanned and use them as a base to work off of. Thanks for the upload Mike! Love your content.

He came through with the skate clips! So sick

Ask @DingDongDrift Marty to make a 3D model of the plastic clip that holds the fuel door cable at the right place to open/close the fuel door for the 240SX!!! I've been using a bolt to hold my fuel door shut for years.

Man.. I know this isn't your usual flavor but I really need to do this for my C3 corvette! I have a set of custom front and rear fiberglass bumper conversions and the guy who made them has either retired and fell off of the face of the earth or passed away. I would love to get them 3d modeled to preserve them before I mount them! By the way, I only found your channel recently but loved watching the Z32 build! Looking forward to more!

mid week video!?! Lets go mike🤌🏼

You can also use athletes foot powder spray on your car to scan it. Washes off super easy.

Go to some motorcycle shops. They may know someone that does chrome 0:42

Oooo imma watch this when i get home, currently at school 😅

thats so awesome! Id love to scan my own car! I could 3D print a body for my RC car!

God this video was such a vibe

Dig the Korn shirt

yoooo that a-bo-moon replica rc car is siiick, i need 1 hahah

The one with techno team sticker drifts so good

Wednesday upload? Yesssss!!

Yoo i saw that sc400 in person before the widebody and it was sickk

Your videos are amazing you have inspired me so much…hopeful to collab someday

I've been waiting for someone to 3D scan the Hood cowl since they're very hard to find and really expensive to buy and I'm pretty good at 3D printing

Love being 25 seconds late to a video