Without a doubt the most thoughtful manual hay baler design I've come across. No lifting hay and trying to get on top. No repeated compression motions. Tight enough bale that is a useful size. Thanks for sharing this.

Классно! Молодцы ребята! Мне очень понравилось! Спасибо большое Вам за видео! 🙋‍♀👍👍👍

Таким прессом наши казаки ещё в 1800 каком-то году сено прессовали. Прогресс!!!

Прессовальня в покосе, а пиво- в посадке.Последний настраивает на работу.Во-он , гляди, тюки шеренгами стоят.Зимовка обеспечена!👍🍗🍖

длинна короба 2 метра ширина внутри короба 40 см высота 50 см размер поршня аналогичен 40 на 50. длинна рычага который присоединяется к поршню и на который мы давим советую сделать 3 метра на видио он 2.5 м. длинна двух стоек 110см каждой.

пиво в посадке..молодцы ребята а главное как все просто

класс как говорица голь на выдумки легка. но это сказал тот кто сам в жизни ни чего путного не сделал малайцы ребята пиво точно заработали и не только его.

все элементарно и просто сделаю себе такой

Молодцы! продуктивность нормальная,я себе по такому типу обязательно сделаю,в этом же сезоне! и выезд на поле классно придумали! А если с хорошим пивком! так это вообще в радость, и работа с пользой и отдых после работы! (мне кажется можно приспособить двойной рычаг) легче давить!

Молодцы

чем проще- тем гениальней....

Молодцы хорошо придумали

Неплохо!

Может и долго но можно погрузить за раз больше объем и места меньше занимает при склад

ребята супер!!! 5+

около 4 минут один тюк. трудоёмко, зато даром))))

Ковбои в деле

Looks like a great idea, BUT I would use a dump rake rather than a side delivery rake to rake up the hay. That way, you could go from pile to pile with the bailer, rather than walking up and scooping up the windrow, and having to move the bailer along with the windrow.

Самое главное, это пиво в посадке !!!!! меня дед бы матом крыл, тюковать люцерку по солнцу, весь лист на земле остался. мы в 4 утра выходили и до 8 заканчивали

Чудеса!!! 5+

четко!!!

Супер

Ive got here, a 8ft horse disc, a 1 16in plow and a 2 14in plow, 2 section peg tooth harrow, 2 row horse cultivator, a JD side delivery rake, steel wheeled, a tumblebug, which looks like a barrel cut long ways in 1/2 with a Y like hitch with the upper legs of the Y pinned to the like top and bottom of a barrel. Its used with a tractor to haul dirt, Pull a rope, and the barrel rolls over and dumps the dirt. A sprayer, that I busted the 300 gal barrel of when it fell off the trailer in hauling. A corn binder, a square bale loader, a round bail hauler, a small portable aluminum 12ft elevator that I have put a pair of old Case side delivery steel wheels on, and a husker shredder.I also have walk behind horse machinery here. a 5 schovel, cultivator, a schovel plow that I use to dig rows to plant potatoes, a expanding harrow, and a lister, which is a plow that throws dirt both ways. it used to have a corn planter attachment with it, but most people took them off when lister planted corn fell out of faiver. When I was a kid, people used them to lift potatoes.

а вот пиво это клаасс в жару !!!!!

I still got to get around 1/2 of my machinery from my sisters where I had it stored while looking to buy a place. shes 72 miles away, ONE WAY. I got yet a tractor disc, 16ft, a hammermill, a grain drill, a spring tooth harrow, a square hay bailer, a loose hay loader, a 30ft grain elevator, a elevator that goes onto my corn binder, 2 sections of my 4 section rotary hoe, and a 48 Farmall H and my granddads Case CC 34 tractors. The Case has a 2 row cultivator on it. The H has a front mounted blade on it.

Почему у пресса подборщика цена полтрактора,. Там нет двигателя дизельного, даже по металлу меньше расходов.

😱два вояки из стройбата заменяют екскаватор.

Well, that's more understandable. I didn't understand what you ment when you said, (I postroll pressed hay with his hands).

Трудная, зато нужная работа.

Ive got 65 rabbit hutches, and I found a place close by in the woods to place them if I want to do that again. I once had 150 rabbits. The largest rabbit processor in the Midwest is around 75 miles away, and they have routes in a circle from that location and will buy New Zealand rabbits only, if you meet their conditions.I don't suppose you get American TV shows over there do you?

Im glad you can read mine. Sorry im to dumb too read yours.

Good looking corn. Did you know that you can feed the corn stalk to your cows, Type in (Husker Shredder) to see how they used to do it here. I saw on U Tubes where a guy had taken a lawn mower, raised it up so that he could get a bucket underneath it, cut a 6in hole in the deck, started it up and fed stalks down through the hole to be chopped up. A husker shredder can only do this if the stalks are bone dry. BUT this guy was cutting them up green with no problem. A husker shredder shucks off the corn and puts it in a wagon and blows the shredded stalks into a pile. Mine is like the orange New Idea that is shown on U Tubes.If you said anything to me in your last post, I didn't get it.Do you grow hybred or Open pollinated corn.I grow open pollinated now that I have the husker shredder because the corn and stalk have more protein in it and the cows like the stalk and will eat it better than with hybred corn.

Самый дешёвый вариант-кризисный на случай войны.

Раб сила

Дааааа, ребят у вас видать очень много свободного времени....)))

Этот процесс надо механизировать. Например, гидроцилиндр и мотоблок с НШ...

Слегка модернизирую роликовыми блоками и будет хорошо

Клас

ah, A wheel rake. Most here have them now. I have an OLD John Deere Steel wheel side rake that makes windrows. You can see it by typing in (Steel wheel side delivery rakes)I am retired at 68. I live on 10 acres, which is 660ft on each side, which is 220 meters Im guessing. Here, I can put in 2 crops on the same ground a year. I plant corn, then when it is off I plant Sudan grass for one cutting, then plow it under by frost, as animals cannot eat it after it being frosted. What kind of hay were you making?

Каменный век.

Пиво в посадке я положила? Мне не послышалось в конце?

I guess you had as much trouble reading my post as I had reading yours.Ive got a pair of horse corn planter wheels and axle I could use, which would raise the upper end around 8in to a foot.

You said you fed your hay to your cows. How many do you have? I havnt had any cows in over 30yrs. I was born on a dairy. We hand milked around 10 or 12 cows up til 1960 when they told everybody they had to start using milkers or they wouldn't take our milk. Dad tried to find cheap milkers but finally just sold the milk cows and bought beef cows.

U Work on the railroad. Here that's a high paying job. Usually dads get their kids jobs, and outsiders cant hardly get on. Me and my boy tried to get on.

I bought this place from a bank who foreclosed on it when the people couldn't pay for it due to drugs. There taken care of now by the prison system and don't have to pay rent lol. The girls dad gave them 10 acres to put the house on, and they lost it also, so I bought it all for $55.000, which is a steal here. The house is 28 X 72, 12 rooms. Im like a pea in a 5 gallon bucket.

Все супер! В нижней щели рейка добавленна я так понимаю по ней скользит Т-образный поршенек чтоб выдавить тюк??? Или как там?

mrGOTSKA, уже писал вам самодельный пресс для сена (2) HD, решил для уверенности еще под этот ролик написать) Скажите какой вес блока получается? И габариты? И если солому тюковать также сколько блок будет в среднем весить?

сделал ,но хотел бы увидеть, как сделан поршень спасибо

Hard reading yours also. More like impossible. Where are you from? Im in Oklahoma USAI was thinking, IF you made 2 of those bailers, and had 4 people to help, AND you dump raked the field rather than side raking it, as in your video, 2 each could take a bailer to a pile of hay. 2 would always fill the bailer, 2 would always tie. While the 2 filling filled the first bailer the other 2 would take the other bailer to the next stack, then come back and tie the first bailer while the 2 filling the bailers moved on up to the second bailer. When the tyers finished the first bailer, and pulled the bale out, they would move the bailer to the next stack in front of the 2nd bailer, and just keep doing that though out the field.IF you don't know what I mean by a dump rake, type in (Dump rake in hay field) on U Tubes to see people using them. Good luck in all you doo. Bill Christopher

Are all those vids yours?? Id like to make a few, but theres only me, and I don't have a camera. How many acres a year do you plow and plant??

OK, Ten tell me how many acres you till up each year. im assuming your doing it with the front mounted tiller I saw in one of your vids.Also, How many acres of hay do you cut a year, and do you bale them all with the bailer you made?I wrote you a LONG letter this morning. Then when I pushed it to send, it wouldn't. My fingers are still smoking, lol. Got too many things to spend money on right now, and I have no one to hold the camera if I did have one. Got this house to get squared away. Some small styuff, but it all costs money

Спасибо! ширина внутри короба 40 см высота 50 см, а длина тюка какая выходит при полном сжатии? в видео говорите 60, но кажется больше вроде на выходе. И вес если давить одному 10 кг, а вдвоем 20 кг, правильно я понял?

You mean to tell me that you turn over 50acres with your riding/walk behind tractor, and that you bale how many acres with the bailer you show using???

я нанял трактор с пресподборщиком и со скоростью 3грн тюк он мне загрузил тюки сразу в прицеп

I also got to get buildings built here as there is none. my daughter has a 10 square shed shes letting me move here from her place, and ill load up a pickup load of hand tools which are stored in another shed to put in the one I haul when I get it here. I want to build a brooder house for chickens, and 2 chicken house. One to raise chickens to sell, which will be kept in a pen, and another for eggs to sell. I expect to have at least 100 in each. I live 6 miles from the most famous hiway in America, Route 66. I figure if I can set up a stand by the hiway on Fri afternoons when people are heading home from work, I can sell eggs well there. There is a large sale that is held the first Sat of the month. it covers around 4 acres, and they sell everything and anything, including any kind of gbird and rabbits. Ive seen chickens go for $18.00 each there. .

Ну что же для начала не плохо.А наследующий год буржуй научат нас сено жрать и не надо будет молока и мяса выращивать.

You would go hungry here a month on that nearly. You surely wouldn't have a house to live in.

Молодцы,а дом не прибывали из них строить?

ЗРОБЛЮ ТАКИЙ ДО ТРАКТОРА )) З ОПІЛКІВ

Имеете ли вы чертеж или размеры этого пресса?

схему можно... зарания спасибо!

здравствуйте интересует вопрос по пресу... как продвигаются ваши модернизации? а какая производительность? у меня 2 гектара я за день смогу натюкавать? спасибо за ранее...

You wroteWilliam Christopher I have a chipper shredder for corn it two years work happy.I can understand the, (I have a chipper shredder for corn). I don't understand the (it two years work happy)??

может оно вам так нужнее, нро помое му морока это, в копны проще и быстрее

размер пресса?

Вот сделали пресс kzfaq.info/get/bejne/m6xgaNhpuZPHdGw.html и еще такой попробовали kzfaq.info/get/bejne/p5mIhbKr2rrPdaM.html

Быстрее и лутше на воз и в пуню назер этот гемор еще и на шпагат затраты

Sorry, I didn't get any of your last message.

Hello

а можно подробно размеры скинуть!!???

ПОЧОМ ОДИН ТЮК ПРИСУЕТЕ ???

ocen mnogo raboti

Довели народ до нещеты 21век люди делают деревяные тюкопреси а эти упыри денги сибе пресуют

I make $1,350 a month on Social Security as im retired, and I can just make it. Ive put in applications at places to go back to work. I can work and make up to around 10,400 a year, and still get SS. I was a fork lift operator. Who are yo at war with?? Hows it going for you?? how close to you is it?? Take care. Bill

нужно как то автоматизировать все это, иначе обсолютно никакой эффективности

Friend, you have sent me 4 or so messages that I cant read. Sorry.

кукрозниможнактознает

ребята вы с какого века дниши таким производством корова сдохнет очнитесь на улице 21 нубы придумайте что нибудь современное ужас минусссссссс

да это очень долго.бред какой то

Имеете ли вы чертеж или размеры этого пресса?