After moving to Sig, I have never looked back. They just keep killing it.

I’ve been rocking with my xcompact for a little over 2 years and I’ve gotta say I’ve been loving shooting it at the range also what I was looking for in size and feel for a carry pistol great gun out of the box

One of nicest 320's I've seen. Nice work!

If you want flush, you can get a Mischief Machine commander grip module that’s made for the PMM barrel and comp, or you can just cut down a full size grip and bevel it to look just like the factory one. Or you can go with the Fdez P320 compact com’p slide and 3.6” barrel. It would look great both ways. The Mischief Machine grip module is full aluminum with a steel locking lug and more of a 1911 grip angle. Check em out 👍🏻 you could also rock the TLR-7 sub with the Antimatter Industries 1913 micro wing if you want a really nice gas pedal/ thumb throttle that’ll fit in regular holsters.

Great Video, thank you for making it. I am a huge P320 fan and have been since they first came out, which means that my first two P320s had to go back for the “voluntary upgrade.” I currently have five of them. My last one I build from spare parts. I had enough parts from all the upgrades that I did to the other four guns that with the purchase of an FCU I was able to assemble another complete gun. As someone who worked for the Army for over 43 years (21 Active Duty) and has some knowledge of the military procurement system, I can tell you that Sig won the contract for three reasons. First was reliability. When the testing was over [only] Sig and Glock were left standing. FN was a close third followed by Beretta. The second reason, and most important reason, Sig was the [only] manufacturer that provided a gun that met the specifications in the bid announcement for a “modular” and configurable handgun. Lastly, was price. Sig’s price was almost 40% less than Glock. If the Army had not been so insistent on a manual safety [or] Glock had been willing to absorb the cost for retooling to make a manual safety gun, Glock would have gotten the contract. For the record, the U.S. military has a contract with Glock, as due DHS, DOJ, and several cabinet departments. Glock is the primary sidearm for most special operation units across all services. The Army really wanted the Glock and would have compromised on the “modularity” requirements, but they wouldn’t compromise on the manual safety, thus, they couldn’t justify the cost difference. While it is not known for sure, it is rumored that FN actually had a lower price, but the guns didn’t perform well enough in the end.

I have a similar build but I used a full size frame that i cut down with a scroll saw and polished with dremel. That’s the only other option I think, if you want a flush look.

I just checked out the Legion x-5 today. now i see this video and am impressed by the quality and story telling. sub well deserved

Glad to see more content from you my dude! I know you want that flushed compensator and slide, but I like what you have as it gives it a nicer silhouette.

The X-Compact 3.6 Slide will give you the flush look you want.

Great video, I built an Icarus Precision P365 xl, with a Norosso P365 X slide and a Parker Mountain Machine Micro comp. WIth the comp, it took about 750-1000 rounds to get it broken in where it shot reliably. Now Ive been running it for about 2.5 years and it is a tack driver. Breaking them in is the key. Nice build.

I've been thinking about putting a gas pedal on my FN 509c Tactical. Your Sig is AMAZING 🔥🔥🔥🔥🔥

Btw. Your Glock Modifications video is hands down the best pew vid on YT… just sayin…

Dude good to see you again. Been a while. Just wanna say you video with the Glock 45 modes is what got me to get my permit to carry and even bought the Glock 45 as my first gun ever. I almost have it similar to yours. Just need that short fire light and that undercut.

J-Body, need to put the Radian Ramjet Afterburner on that G45. Great video. Glad to see you back at it.

Had a Glock for years. Picked up the XMACRO and holy shit. Perfect ergonomics and perfect grip and I can shoot it so easily. My wife jsut got one, and she hasn’t shot since pre Covid. She was tagging bulls eye. With the Glock all over the place. This is the new status quo

For a flush look get the full-size frame with full size dust cover and chop it to the size of your slide and comp. There are vids on how to do it.

I bet this gun is over $1000. Definitely out of my budget range, still looks like a nice gun.

Honestly I just couldn't be happier with all three of my x carry pistols. I do like the spectre grip the best though.

Great to see a new video from you

This edit was sick, although I’m a Glock guy I’ve been thinking of building a P320. PMM comps for the win also!

Beautiful pistol 🔫

Yessirr more great content😎💯

Great Vid, Thanks for showing Gas Pedal brand thumb assist. Many other holsters fit as well and easy mod as well

Finally bringing more content.. LOVE THIS for you man. Great video editing too.

3.6 barrel is flush not the 3.9

Nice presentation my man! I’ll wait for another before a sub but I’m digging your stuff!

Rolled through the comments and didn’t see anything, you have to buy a X full length grip module and cut it down. No one makes a 4.1” grip module since 3.9 is carry and 4.7 is full.

Yes! More content dude! Sidenote... I'm just gonna have you build my firearms for me from now on. Sound good? Cool. 😂

How much did that build set you back ? I have a factory X carry and love it . Was very skeptical with all the accidental discharge rumors . I recently dropped it by accident in a holster about waist high . It hit a hard concrete surface and passed the accidental discharge test in my book . I was scared shitless when it fell and hit the ground . I usually am very careful with handeling firearms all humans make mistakes at some point . Needless to say no misfire happend .

Glad to see you back! Great video as always. Looking forward for you to review P320 AXG PRO or AXG LEGION.

Really underestimated them and make great edc's too. Thanks again for the vid.😎

Fantastic review.

was going to turn my p320 carry into a "custom" full size, was like 900 in parts...a x5 legion is 1050....pretty sure having 2 guns is better than one

That’s a sweet looking piece!

Great content as always. Hard work and love put into the editing and presentation

Sigs are awesome.

Great video, great presentation. 👍

Just from where you were shooting I thought that was Pleasant Valley or similar South Idaho desert. Stockpile is my go-to as well. Garand Thumb shops there 🥲

Great shout out to Boise Idaho! I also shop at stockpile.

Best bet for a pmm flush comp. Run a sub compact slide and get the jttc mushi compensator. Icarus precision has a 365 xmacro for a full sized option with a pmm comp already installed

Great video, inspired me to start my own build!

sig makes a full size length x series grip module that should give you that flush look your lookin for great video and nice lookin build my man!

3.6” sub-compact with a PMM micro is a flush fit in a carry size frame

I have an Xcompact Zev P320 build with a WC grip plus Gas Pedal. LOVE IT. I plan on getting a Zev slide for my G19 but that shit is always sold out.

The last thing i want to see at the end of my barrel is the front sight. Not an additional length of any compensator.

Unfortunately, I don’t believe there is a compensator made that would sit flush but if you’re willing to get the work done on a frame, I would get a full size frame and cut it down so that it sits flush with that compensator on there but in my opinion I think it looks awesome just like that

i still carry my rxp xcompact and its a beauty

It looks like you put a compact slide on a Xcarry grip. My Xcarry grip is flush with my Xcarry slide. Now as far as running a flush comp I think you'll have to get a full size grip module and put a bigger comp on like a dual port one. Agency arms makes one that is a little longer on the single port but it would look kind of funny where the recoil spring comes out sitting on the grip.

greetings! good video! Have you had a problem with the slide cover TYRANT Designs I bought one and while practicing the extractor nail system flew away I wrote to them and they sent me another one but after several practices I saw it very marked and I dismantled it. what is your experience?

My build is damn near the same, except I have the Icarus precision x carry frame, an apex trigger, a 508t and tlr1 hl! Shoots like a dream!!

Great video, nice looking pistol. Glad to see content from you.

you could get the full-size frame and cut it slightly longer than the x-carry size

The only flush pmm builds are a Carry size 3.9 with the gen 2 jttc or the sub compact 3.6 with the ultra jttc.

He’s back!

I too wanted that flush look, and after a lot a research the only that I found to make that happen is to get a fill size frame and cut it down to size. I would rather not have to do all that work but i havent come up with anything else

Better watch out bro I hear them shits like to retaliate against their owners and spontaneously combust 🤣 just playin, nice build!

How does the SRO work with the x carry? Does the case hit the body of the SRO?

Great build ! Im actually in the process of a similar build. Im kinda new to the game…Question, did you get the sub compact or compact combo from pmm ?

Cool content and subscribed

If I am not mistaken, the standard p320 grip module and the regular size pmm comp will have a flush look.

I have the gas pedal on mine and no issues and nothing extra done to my holsters. All my holsters are appendix carry by teir1 concealed. Currently I'm using the msp by teir 1 and I can swap between my p320s and glock 45 and others just using a flashlight.. msp holster uses the flashlight to lock in so I'm running the tlr1hl streamlight. Check em out I have several holsters by teir 1 and I'll never use another company for holsters

I’ve seen someone use a full size frame and cut it to flush fit the 3.6 slide with PMM comp. Just an idea.

Exactly what I want to build, but I also want that flush fit. I will just get a full-size frame and trim it. My 320 X Compact slide and Harrington Arms comp are 100% flush on a full frame. Specifically, I have the Icarus Precision Socom Full module, and it's very impressive.

It's like collecting Jordans

Question.. so I just built a compact size with 3.9 threaded barrel I put a DPM also. I tried all 3 but every other round it jams or doesn’t go back to battery… is that some of the issues you also had? Just wondering since you didn’t touch on what they were. Also would you recommend to just keep shooting till I break it in?

I’m doing this EXACT build just a different slide. What side holster do I need. IWB KYDEX. Would it be. X CARRY size???

@principle caliber ….. so I pretty much got everything you did to do my build but for whatever reason when I got the jttc micro comp it does not fit properly. There is a gap, did you order a compact barrel or the sub compact barrel for your build? I just do t know where I went wrong. Any advice?

Nice do you have it your edc rotation?

3.6" slide will give ya flush fit

I'm Afraid to carry mine in fear of sending one into my junk

Just a question, how come the frame is longer than the slide? I really like the looks of it. If i want this set up which frame do i need to get? Looking to upgrade my ca320

Nice setup What size is the slide, is it a 3.9 or 3.6 thanks

Hi Principle Caliber, I appreciate your content! I was wondering, what would you recommend for an EDC (concealed) for a right handed guy with an almost blind left eye (lazy eye) but good right eye vision that conceals well, doesn't have too much recoil, and I can actually aim well (and quickly). I currently have a Springfield XD Mod2 4" 9mm, OEM. I love the grip on it, it's like it was built for my hands. However, the iron sights I've trained on I do "well" on for my eye sight condition but I know I could do better; it's very difficult for me and takes way too much time to aim for an accurate shot; also the size was very hard for me to conceal and was not comfortable. I've been thinking a Glock 43X MOS, with some kind of modifications to fit my needs/condition. Thoughts? Much appreciated! Keep up the great posts!

Pretty sweet till you find out the thread pitch is different then most red dot screws, don’t know why they decided this dumb ass decision but oh well. Ordered new screws just hoping they work

Yeah and as soon as they stop firing in holsters they'll be good

Does this one fire on its own too?

Arc reactor just came out p320 slide with build-in comp

What size slide is this though? I like the none flush look for some reason

Just get an X5 grip module. Or the 3.6in barrel/slide.

You need to get a full-size frame and cut it to fit flush. kzfaq.info/get/bejne/hZtda8141prJj6M.html

Nice 👍 setup What size is the slide 🛝 is it a 3.9 or 3.6 thanks 🙏

That gun is so sexy

Hey have you been experiencing problems with the over hang of the sro?

What gun cabinet is that behind you? I'm in the market for one and could use the direction.

I’ll take that off your hands . I don’t have ocd lol

No one gets how I portent a good guide rod is i myself went with the 1911 style solid guide rod wirh a 14 pound spring and its worked amazing from 115 to 147 it runs it and loves it only thing left is cutt slide and she really be moving

My only comment so you find the Tricon better than the sig Sauer Romeo??

Any update for this build?any issue? plan to build same as yours.

What is the barrel length you picked?

Want to sell it? I am an FFL in Denver, and it would be an easy sale! You can keep the SRO as I run the 5MOA, the 2.5 is too small for me.

Sweet…where can I get that “gas pedal” mod for mine?

😍

You from Boston?

what barrel size did you use?

How much did this build cost?

How long is the barrel?

Are these still not drop safe?

you shoulda bought a staccato c2 ©

got that dad bod

You’re not going to be wearing ear pro if you have to actually use it. But you’ll have a souvenir for your trouble…permanent hearing loss.