Printer too noisy: what to do

Рет қаралды 116,363

Күн бұрын

What to do if you printer works fine, no error messages but it’s too noisy when it’s printing.
Grinding, squealing, squeaking, buzzing are the most common noises.
How to make it less noisy.
For any question or suggestion leave a comment
-----------------------------------------------------------------
email: link.accessori@libero.it
other links:
www.emmegiricambi.it/
-----------------------------------------------------------------

Пікірлер: 63

@pegknight4714 2 жыл бұрын

THANK YOU! Your video is so helpful. When you said if it continues making noise AFTER the pages have printed that it was likely the fuser unit, that was the key! So my husband and I ordered a replacement fuser unit and installed it. It fixed my HP LaserJet Pro 200 MFP M276nw. No noise now!

@eiclkun 2 жыл бұрын

Thanks, i just greased the white plastic gears on the toner and the one inside the printer that contacts the toner gears. It's much much better now.

@robertcampos4722 10 ай бұрын

Excellent video and will implement this in servicing a LaserJet CP4525

@Pannonnique 4 жыл бұрын

this was a real help, thanks (it was the tonner)

@syedimtiazali9933 3 жыл бұрын

Informative video

@_ancientvoice1 11 ай бұрын

Thank you

@AaronHyster 2 жыл бұрын

This is what I have been looking for. thank you for the well explained video. how about if its too slow when printing. what do I do solve it?

@viandant5 2 жыл бұрын

Try this: kzfaq.info/get/bejne/fr1zmdx3vtbPiIU.html

@tanmoy2227 2 жыл бұрын

Remember, less is the best

@raviravariya5252 5 жыл бұрын

Is there any special chemical spread on doctor blade and which rubber can be used for manufacturing it?

@viandant5 5 жыл бұрын

in my opinion there is not a chemical spread that works. doctor blade are mostly made with silicon rubber

@neilramnauth7190 3 жыл бұрын

My laser printer seems to find a very usual problem I cannot seem to find anywhere on the internet, it's a HP CP2025 and the 3 colors (YCK) prints great but the Magenta (M) does not print no matter what I do, i even replaced the cartridge twice with brand new genuine toner and the magenta still will not print. Help please

@viandant5 3 жыл бұрын

Never hear that. Does the test print is correctly printed?

@martinikeya6799 3 жыл бұрын

my hp officejet pro x451dw printer making grinding noise when am printing, how do i fix it?

@viandant5 3 жыл бұрын

It could have lot of causes, probably a tooth of a gear somewhere

@younasmanzoor3422 4 ай бұрын

Please make a video on hp m102 toner cartridge alignment cam gear noice problem many people facing that problem

@viandant5 4 ай бұрын

thank you for the advice, when i have a printer in office I'll do it

@MrSyedabuthahir 5 жыл бұрын

When I switch on my Samsung ml1640 printer it gets continues grainding noise when I check, it comes from gear wheel connected with motor in that location motor spins continuously but gear wheel does not move due to that it gets sound, how to repair that please inform me after seeing this message

@viandant5 5 жыл бұрын

Sorry I haven't video on how to disassemble ML1640. you have to start the disassembling from side panel

@MrSyedabuthahir 5 жыл бұрын

@@viandant5 I have disassemble entire printer parts. No need video also, if possible please tell me which part I should check and which part I need to replace. Even when I remove the toner also, fuser light starts glow when I switch on the printer and motor gets run then grinding noise occurs gear wheel does not rotates.

@viandant5 5 жыл бұрын

@@MrSyedabuthahir the feed gear has the code JC66-00809A, the clutch gear JC66-00322A , without watching the printer I can't be sure which is the gear you need

@SLNSYADADRI 2 жыл бұрын

Sir please clear my problem my printer printing is very dark cartridge was new but print very dark...

@viandant5 2 жыл бұрын

Which printer?

@hathakker802 2 жыл бұрын

Can we use hy-510 as conductive grease in printer?

@viandant5 2 жыл бұрын

I don't know hy-510 but if it's a conductive grease yes

@hathakker802 2 жыл бұрын

@@viandant5 it's actually, thermal conductive grease used in CPU. Can you confirm me that whether or not it can be used?

@viandant5 2 жыл бұрын

No it's not a grease, it's a compound

@hathakker802 2 жыл бұрын

Hi. It is to ask you that I have an hp colorlaserjet pro mfp m182n and have refilled all the four cartridges. The problem is with the black cartridge that it squeaks, despite that I have already lubricated the wiper blade with toner. Is there any other solution?

@viandant5 2 жыл бұрын

Try with some grease in the gears, or conductive grease in the contact of the toner roller

@hathakker802 2 жыл бұрын

@@viandant5 can we use hairoil / wd40 as conductive grease? Also do you what do you mean by lubricating toner roller? Rollers ends or what the full surface?

@hathakker802 2 жыл бұрын

@@viandant5 I have also changed the opc drum and pcr, but the problem still exist. Where can the problem lie then?once I overfilled the cartridge with excess toner? Does it has anything to do with that

@hathakker802 2 жыл бұрын

@@viandant5 kindly have a look at this video. My black cartridge squeaks exactly the same way as shown in video. Kindly follow link below. kzfaq.info/get/bejne/erKRjNWEx7Kah40.html

@viandant5 2 жыл бұрын

@@hathakker802 The squeak could not be related to the toner cartridge but to other components of the printer, as in that video. I ment to lubricate the contact of the toner roller you can find at the end of the roller. I think the noise has nothing to do with the overfilling of the cartridge

@karambirsingh5114 2 жыл бұрын

Which lubricant is required plz specify about the name

@viandant5 2 жыл бұрын

A normal grease for mechanical parts will work

@patriciovillarsimon2414 4 жыл бұрын

Hello, I have an HP Laserjet 6P. It picks up the paper, it prints but it gets stuck before coming out. A noise is heard, sort of grinding plastic noise and then paper won't come out and it gets jammed. When I turn on the printer I can hear the grinding noise of the gears but won't trigger an error until printing. It seems like the noise is coming from the fuser gears but not sure. Any ideas or tips?? Thank you! (I have a video of the sound if needed)

@viandant5 4 жыл бұрын

Check if there are foreing object inside the fusers, try to print a cardboard

@jocelynginter5162 Жыл бұрын

Our printer makes this exact noise, what was the issue with the one in the video? Maybe that will help us know where to start. Thanks!

@viandant5 Жыл бұрын

In this case it was the toner cartridge

@PinoyinKSA 2 жыл бұрын

What lubricant better used?

@viandant5 2 жыл бұрын

normal grease for mechanical parts

@goldenfami 5 ай бұрын

@@viandant5oil? Can you tell us examples

@viandant5 4 ай бұрын

@@goldenfami something so it.aliexpress.com/item/1005003726196793.html?src=google&src=google&albch=shopping&acnt=494-037-6276&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=19207365798&albag=&trgt=&crea=it1005003726196793&netw=x&device=c&albpg=&albpd=it1005003726196793&gad_source=1&gclid=CjwKCAiA3JCvBhA8EiwA4kujZgeBAVMeu6ayScyoZO5i1xMcbAdXSkApYfLK4ctbmw8sqRwIfPH9hhoCRQMQAvD_BwE&gclsrc=aw.ds&aff_fcid=2214a9dbb47c405db4f6bd2a32cf8683-1709501095669-01962-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=2214a9dbb47c405db4f6bd2a32cf8683-1709501095669-01962-UneMJZVf&terminal_id=83227a19c644415d9d2a08234cb323ba&afSmartRedirect=y

@niyonkuruclaver8857 3 жыл бұрын

Very

@leonardnkuna8849 Ай бұрын

My HP 11311 is having a grinding noise, what mayb the problem

@viandant5 Ай бұрын

what is a HP 11311? however if the machine is working I suggest you to continue to use it

@leonardnkuna8849 Ай бұрын

It says paper germ always i try to print with the grinding noise. I checked there's no piece of paper within

@viandant5 Ай бұрын

@@leonardnkuna8849 Here there are suggestions kzfaq.info/get/bejne/r76Hmttp0pPLiWQ.html

@ADNANKHAN-ts8gh 2 жыл бұрын

This cause in my 319

@JeanieMerz Жыл бұрын

My Brother Printer is making "Notification" noise every few minutes! it drove me crazy all night & is still doing it! How do I STOP it ?? PLEASE help!!! TYIA

@viandant5 Жыл бұрын

But which printer?

@JeanieMerz Жыл бұрын

@@viandant5 "Brother" it is new, but it makes "notification" noise every few minutes???

@viandant5 Жыл бұрын

Saying "brother" is like answering "Ford" when a mechanic ask you which car do you have