pro xp cab enclosure and heater review

Рет қаралды 34,527

Ok Out

2 жыл бұрын

I've had the upper doors and inner panels on since this summer. I've only had the heater in for about 200km.

Пікірлер: 42

@Axethrash 2 жыл бұрын

I enjoy these styles of videos, real people and real issues. Ordered my 22 Xp Pro in august still waiting....fuck!

@okout 2 жыл бұрын

So far they seem to be great machines, no regrets on my purchase.

@jerrodkulzer6299 7 ай бұрын

I am in the middle of installing same enclosure on my '23 4-seater. At the bottom of window, is the stitching of the new window in or out of the outer door skin? It's weird both ways. I am able to get a few screws in on lower inside door. I like the drill hole idea for the rest, thanks. What did you use to plug the 3/4" holes after install? 1. Don't forget the spacers on the 3 mount bolts of window to door where the rust is, each side on top...I did! Taking it apart as I write. 2. Leave everything loose on the cage to fit it until your happy with the fit. 3. Need to cut out for mirrors also. Dremel saw works amazing. It isn't the best instructions provide for sure!!! Thanks for posting yours. I installed a sound enclosure curtain (used for industrial compressors, dust collection) behind back seats...25-30% percent noise reduction guessing & can remove easily. Helps with some heat but most is coming from front and tunnel.

@scroob72 2 жыл бұрын

You got me at "only -2"! If it's 40 out in CA camping, I'm freezing my nuts off out in the desert.

@okout 2 жыл бұрын

Haha thats -2 Celsius, more like 28 Fahrenheit.

@dunavungoeckner6495 2 жыл бұрын

Has anyone had a turbo XP with the Polaris enclosure and the pro XP enclosure ? I've got a 21 turbo and although the doors (upper and lower) are better then nothing they still kinda suck. Nothing like a vehicle, they all let in a lot of air. Pluss you have to strap the tops on or they will come open when going down the road. I am curious to know if the pro cab enclosure is better and if so by how much ? Thanks to anyone who can led some information!

@austinkarmire4643 2 жыл бұрын

I just installed mine on my 4 seater. The 1/4" holes you drilled on your inner doors needs to actually be drilled to 3/4" so you can bolt it on.

@okout 2 жыл бұрын

Ah yeah must have missed that thanks!

@DuramaxMatt Жыл бұрын

Is this for the bar hold?

@lilhotdog7011 11 ай бұрын

Yeah its essentially to let the bolt head pass through to the metal frame in the middle and the outer shell. Took me a bit to realize. I had to remove it and reinstall it once I did.

@pmclaughlin1339 2 жыл бұрын

Would you recommend the fender extension ,im waiting for a 2022

@okout 2 жыл бұрын

Yes

@mikemonak 2 жыл бұрын

new tender springs will make your ride 10 times better you will not be disappointed

@okout 2 жыл бұрын

They probably would. Might get some one day.

@tyrelthibault5264 2 жыл бұрын

Which company?

@pmclaughlin1339 2 жыл бұрын

New tender springs make it ride better at any speed or just slow speed

@pmclaughlin1339 2 жыл бұрын

Is it a Polaris heater? Did you have to take the whole interior out to dynamat the back wall ?

@okout 2 жыл бұрын

It is a polaris heater, and you have to take the center console out to put the dynamat. But you'll pull it apart anyways to install the heater.

@kwmiked 2 жыл бұрын

Do the inferno heater. Mounts in glove box, much better spot, and half the money

@X1j5 2 жыл бұрын

What part is it that closes off the front lower part of the door? Right behind front fenders.

@okout 2 жыл бұрын

Polaris inner door, it works well.

@X1j5 2 жыл бұрын

@@okout thanks!

@speedbanditch1465 Жыл бұрын

So I have a turbo R 2022 full cab and inferno heater and dealership installed everything rock sliders fender extensions all the other stuff is great but the heater is like air conditioning, leaks antifreeze no heat so what brand is that heater

@okout Жыл бұрын

Mine is polaris

@Chillymosquito Жыл бұрын

Do you have a windshield wiper with your windshield…? If not is it a problem?

@okout Жыл бұрын

Yes I do have a wiper. I do have a quick video explaining that, if you feel like checking it out. I do recommend installing a wiper, expecially if you're going to run tracks or somewhere that gets snow.

@345HEMI1 2 жыл бұрын

Where did you get the bottom of the door s

@okout 2 жыл бұрын

Polaris inner door panel

@kennysleeth171 5 ай бұрын

What brand are your lower door inserts

@okout 5 ай бұрын

Polaris

@joe-zc1wj Жыл бұрын

How hard is it to take these off for summer months?

@okout Жыл бұрын

It's a pain, ideally you'd have a second set of doors. If the machine wasn't so warm in the summer I'd just leave them on.

@markcoleman2960 2 жыл бұрын

What brand enclosure is this sir?

@okout 2 жыл бұрын

It's all polaris, but the back window is superatv

@pmclaughlin1339 2 жыл бұрын

I just got my upper doors install and the front part that goes against the machine ilhas a 1 inch gap all around dealer install i think they didn't do it right

@pmclaughlin1339 2 жыл бұрын

How's yours could you send me a pic i don't see in your video from inside but outside looks better than mine