@dougharlow6037 Жыл бұрын
I love the Grabber 8567. I have this in 12, 20, 28 & 410. I’ve put 1000s of rounds through each one. I also have the size master in 12 & 20, and the Jr. in 12 & 20. I also use their Mec Jig Fixture, so I can swap out reloaders fast and simple. Can’t say enough about Mec. They are awesome. Thanks
@robbierabby1848 2 ай бұрын
I have a pre owned 28 gauge jr. Works well for me loading 100 at a sitting.
@KD4BAW 5 жыл бұрын
Great VIDEO SHAWN!! MEC is the BEST Shotshell Reloader on the market, I should know, I have 4 of them!! Looking to get me a GRABBER next!! I am an NRA Shotshell Reloading Instructor and I teach and recommend all MEC Presses for their price, ease of use and durability to all my students!!!! CAN'T BEAT THEM!!!!!
@young_of_the_mill9560 4 жыл бұрын
Mike Landis which do you recommend for a new reloader?
@kurt5490 4 жыл бұрын
I think this is the 1 I should buy. I dont trust myself to manually push the shot bar back and forth in time with the progression of stages. Yes its 2x the $ of sizemaster, but I will enjoy the flatter learning curve and enjoy reloading. The frustration factor is worth the $300 difference.
@jimplosay8352 5 жыл бұрын
Love my 761R Grabber!
@dimplesambyal4548 9 ай бұрын
Very nice
@Sprachlos 5 жыл бұрын
👏👍starkes Teil.
@tonygotts199 Жыл бұрын
And how are the crimps with new shells that are at different lengths
@johnbailey9682 4 жыл бұрын
I like the mec but still have a lot of problems with the primer feeder and now the part the pushes the primer into the shell keeps falling apart because it only held by a spring and there is no fasting device on the bottom of the rod to keep it in place ?
@MECOutdoors 4 жыл бұрын
Hi John, The bottom post #525A may have worn slightly shorter and is not holding the assembly in tight. I recommend replacing the primer seating assembly with the current style #525CA12. The current assembly is slightly longer and will fit into the base tighter. Please call 1-800-797-4632 or email us at reloadersales@mecoutdoors to place your order or if you have any further questions.
@bradesteve2077 3 жыл бұрын
@@MECOutdoors I got the grabber as well a little black c shape Part fell off i don't know where it goes
@MECOutdoors 3 жыл бұрын
@@bradesteve2077 Thanks for commenting. Please take a picture of it and include the model you have in an email to our customer service. The email is: reloadersales@mecoutdoors.com
@SgtCpt 3 жыл бұрын
I had the same problem with the primer post not staying in place. I got a washer for the post to fit into and JB welded it into place. Works like a champ. I’ll probably do the same with my 650.
@jaimebedolla989 3 жыл бұрын
I recently purchased from a private seller, is it normal for the powder and shot load to release if no shells are in those stations , like when doing one shot at a time like video, or when completing last shells from stations 4 thru 6 and out of primers in feed tray ?
@MECOutdoors 3 жыл бұрын
Hi Jaime, Thanks for commenting and asking the question. When no shells are in the 2nd and 3rd stations , the charge bar should lock up which prevents the powder and shot from dispensing. If the charge bar does not lock up properly when the shells clear the first two stations, follow the following instructions; -Make sure that the charge bar is completely traveling to the left. The small screw in the front of the bar should contact the left side of the chrome measure assembly when the press hits bottom. -The top side of the trip rod #670F should be flush with the top side of the drop tube bracket #670C when the press is in the down position with no shells in the reloader. If the trip rod is above the bracket, bend down on the trip rod bracket #670E slightly until the top of the trip rod is flush with the drop tube bracket. The trip rod bracket is half way down the trip rod. The bar lock spring #670B should also be checked to ensure that it is not weak. If you have any further questions, please reach out directly to our Reloader Technicians at reloadersales@mecoutdoors.com or 1-800-797-4632 Thank you!
@oscarurbinamolina8128 3 жыл бұрын
Donde consigo esta máquina?
@MECOutdoors 3 жыл бұрын
Thank you for commenting. You can find this reloader on our website here: www.mecoutdoors.com/8567n-grabber or by finding your local reloader dealer here: www.mecoutdoors.com/where-to-buy-sr Please let us know if you have any further questions. You may call us at 1-800-797-4632 or email: reloadersales@mecoutdoors.com
@salvatoreanastasi8108 Жыл бұрын
Come si può acquistare io italia costo
@drewt.4353 3 жыл бұрын
I always mount my press on shaky tables...