Professional Quality Signs on My SHARK HD520

Рет қаралды 10,536

2 жыл бұрын

I wanted to make new site location signs for our RV Park, so after doing some research on exterior signs I decided to make them from PVC trim boards.

Пікірлер: 23

@ianrepollet6016 6 ай бұрын

Thanks Ron

@ccfox-wecanmakeit9523 8 ай бұрын

very impressive

@robertmizek3315 Жыл бұрын

Excellent video, Ron!

@ronshapland7990 Жыл бұрын

Thank you Robert, I see people struggling to get started and just want to help them understand it is easy once you take the plunge.

@christophermalli9983 Жыл бұрын

very nice

@ronshapland7990 Жыл бұрын

Thanks Christopher, right now I am making some trail signs in the pattern of National forest signs, and some goodies to sell in our retail shop

@maxgarcia9512 5 ай бұрын

Thank you, Ron. Those signs were absolutely beautiful. But what type of bit did you use on that project? Thanks again!

@ronshapland7990 4 ай бұрын

Standard 1/4" spiral upcut spiral straight bit for clearing, and 60 degree vbit for the details and lettering

@mike8171 Жыл бұрын

Ron, this is a very good video! I can't find the kind of PVC you purchased at Home Depot. You purchased 11in Wide by 1in thick. Can you provide a brand name or SKU? Also, after you completed all the CNC work. Did you get a surface that did not need any further machining work? Did you coat the finished sign with any kind of finish? Thank you very much for your comments! Mike from Denver

@ronshapland7990 Жыл бұрын

Hi Mike - it's called Veranda - usually only available on line in these widths. I have purchased narrower material in the molding sections of my local store. Model 827000204 Internet# 316293572 Store SKU# 1006203520

@user-pt4xj3uz9w 2 ай бұрын

Ron, I am brand new to the CNC world and looking at the HD520. The video was great! What spindle were u using with the machine. Was is Bosch 1617? Also do you have any experience with the water cooled spindle from Next wave? Thank you! John

@ronshapland7990 2 ай бұрын

Hi Jerry, yes it is a Bosch 1617 EVS - I've just always liked the simplicity of using a Router and it's ability to use 1/2" shanked bits as needed. You would need to step up to their 3HP to do that and I can buy quite a few Bosch for that $$ :-)

@TimHallboxlearning Жыл бұрын

Great video!!! Could you do that with a 510?

@jamesbardinelli8435 Жыл бұрын

Do you own a 510 also? I just bought one and I'm trying to create a plan for a simple and sturdy bench

@ronshapland7990 Жыл бұрын

Sure, sorry I didn't even think about there would be comments on the video - darn rookie youtuber right? - you can easily do this on a 510 or HD500

@markmoulin41 Жыл бұрын

Does Shark make any models that are 36 or 48 by 48 in size, or just 24?

@codyfawcett7287 Жыл бұрын

Are you able to x,y touch plate zero on the hd520? If so, how? I would love to be able to do thatl on mine.

@ronshapland7990 Жыл бұрын

only the Z - everything else is by sight, I usually use a v-bit

@jamesbardinelli8435 Жыл бұрын

Hey Ron, did you purchase your pendant holder or make it? Do you have any pictures of CNC benches people use? I just bought an HD510!

@ronshapland7990 Жыл бұрын

Hi James, I purchased it on Amazon, any standard camera mount will work. Sorry I don't have any pics, but I know a lot of people use the shop stands from Rockler - www.rockler.com/rockler-customizable-shop-stand

@jamesbardinelli8435 Жыл бұрын

@@ronshapland7990 appreciate the info. I ended up making one and securing it with 3/8 black pipe and flange. It will swivel, but I have to loosen the bottom bolt. That sucker won't break off anytime soon!

@markmoulin41 Жыл бұрын

No spoil Board?

@ronshapland7990 Жыл бұрын

Hi Mark, I have a spoil board but they are removeable slats - didn't need it for this instance as I wasn't cutting through which is when I generally use them.