No video
Project 095 | Making RC steam boat
Рет қаралды 1,936,609
5 жыл бұрынA remote-controlled, aluminum boat that needs gas and steam to be moved is our new construction with the number 0095!
► Click HERE to subscribe: bit.ly/MakeitEx...
► Second Channel: bit.ly/MakeitEx...
• Get the Plan: bit.ly/MIEplans
• All details: bit.ly/31L6Kag
• Help us on patreon: bit.ly/MIEpatreon
Welding Machine:
• Mig: bit.ly/Rallymig
• Tig: bit.ly/PITIG
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.co....
-----------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitex...
• Instagram: bit.ly/makeitex...
• Special Thanks to our Patrons:
✔TOP Patron: [Devin Bauste]
New Patrons: yehia raef, Jim Kenning, Aidan Kelsen, Mike Gannon, Darc Mavis, Oswaldo Yunga, Sam Derhore, Reg James, Rocky Flavio Quispe Ticona, SLIMJIM, John Mason Grossenbacher, Q
• Playlist for all videos: bit.ly/2gZL4Dg
• Intro Design: vimeo.com/9014...
#makeitextreme #makeitextremeshorts #steamboat
@aitorius 5 жыл бұрын
Wow, the boat had submarine mode! 😂
@ElmarDove 5 жыл бұрын
You right. Had.
@ravensburgpiet 5 жыл бұрын
Ya man alot of work,for a sub with no teturn to home now!
@amatirvideos8493 5 жыл бұрын
😂😂 kapal selam
@_NGUYENMINHTHUAN 5 жыл бұрын
aitorius what the fuck?
@_NGUYENMINHTHUAN 5 жыл бұрын
aitorius unhappy
@georgf9279 5 жыл бұрын
Bigger propellor maybe? The motor seems to have plenty power. Make it go moar faster. ... oh ... and a bigger hull ... less sinky.
@jean-lucpicard3012 5 жыл бұрын
Less sinky.. I'm gonna have to find it how I can use that in conversation now XD
@cicunkuk 5 жыл бұрын
Georg F he should put the machine lower to make it stable
@thatfellafrazer 5 жыл бұрын
Lowered motor for stability but to make it faster still will have to dramatically lower the weight.
@KalLanPIDT 5 жыл бұрын
prop size matters less then the angle of the prop blades, a bigger prop wont make it faster.
@PhantasmPhoton 5 жыл бұрын
big paddles wheels on either side would prolly do really well
@johnkuzma7066 Жыл бұрын
That's a nice little boat, may I suggest putting the burner flue towards the bottom of the boiler instead of the center, it'll give you more runtime as it takes longer for the the flue to get exposed and stop making (as much) steam.
@DontTalkShite 5 жыл бұрын
Not quite as fast as I was expecting, cool build though. I love that you don't stretch your videos out too long.
@exoedge6322 5 жыл бұрын
I think its bc it doesn’t have much torque
@NathanielHatley 5 жыл бұрын
I think it's just because it's really heavy. That propane tank combined with the boiler should be at least 20lbs, if not more.
@ianboddy4368 5 жыл бұрын
@@NathanielHatley Better prop design and flatter hull shape in the front would help it a lot.
@tenlittleindians 5 жыл бұрын
@@NathanielHatley That is part of the problem. Here's one without the propane: kzfaq.info/get/bejne/rsqViMhqr8mmhok.html
@thatfellafrazer 5 жыл бұрын
@@NathanielHatley my thoughts exactly.
@Rudderify 5 жыл бұрын
Great build ... now you need to build a steam powered recovery tugboat. Hehe. Love the ingenuity!
@yodu45 5 жыл бұрын
Next Episode: RESTORING RC steam boat.
@singakertas5462 5 жыл бұрын
Titanic? 😂
@pino1022 5 жыл бұрын
Jajajajajaja siiii
@doubledarefan 5 жыл бұрын
No iceberg, so no.
@urbex-fromitaly5934 5 жыл бұрын
@@doubledarefan river version
@romanr.6018 5 жыл бұрын
Singa Kertas
@XubonchelseaXubon 4 жыл бұрын
Kakakaka 😂😂😂😂😂😂
@brucelouden8405 Жыл бұрын
every story needs a great ending ... you didn't disappoint. lol. thanks for the laugh
@bagusprihastomo7439 5 жыл бұрын
Watching the whole process was so satisfying, thanks for entertain us this way.
@asvarien 5 жыл бұрын
You guys never fail to impress. You even made your own air / steam motor, that's just brilliant!
@viermidebutura 5 жыл бұрын
Not a new thing... You see it in every pneumatic gun. Still impressive though
@superdestructorx 5 жыл бұрын
@@viermidebutura he didn't say it was new he just said he made it themselves, which is impressive :D
@madcrokodile 5 жыл бұрын
They didn't made engine. Its fabric.
@mimemony4810 Жыл бұрын
@@viermidebutura b
@CNC-Guru 5 жыл бұрын
Should have definitely build Jet at the back. Would have more control with steering and propeller would have better flow = thrust. Overall great project!!! Well done and you have amazed me with your skills once again. Keep it up!!
@radder76 2 жыл бұрын
Финал, конечно, эпичный!!! Браво:)
@MarinusMakesStuff 5 жыл бұрын
Hahahaha, I love how you just went alllll the way with creating such a beautiful boat. It doesn't matter that it sunk. But I hope you now feel obliged to at least create a version 2.0 ;)
@manuelfriend4060 5 жыл бұрын
This guy would be awesome for an uncle. Imagine the birthday presents xD
@daveforshey3121 5 жыл бұрын
Dude, Whenever I watch your videos it amazing me how creatative you are. I'm not sure what you do or did for living before making videos but your skills are impressive. Keep up the great work.
@pabstblurobot 5 жыл бұрын
Do you know who else would love this? Hank Hill
@zoesdada8923 4 жыл бұрын
He built a boiler with a steam turbine engine, made a hull, made it radio controlled and then sank it.
@Graybear78 5 жыл бұрын
This man is an artist with that welder. Simply beautiful!
@samgriffiths7609 4 жыл бұрын
Were we watching the same video?!?! 😂😂😂😂
@DeejayOmbra 5 жыл бұрын
allways nice idea Bro. What do you think to make a video with all the wrong stuff happening during your projects?
@Nicksperiments 5 жыл бұрын
It would be a short video
@davidelliott5843 3 жыл бұрын
The Scott Boiler with its hanging water tube loops and coiled superheater is a thing of steam beauty. Lots of fiddly welds but this guy would be fine.
@davidelliott5843 3 жыл бұрын
Steam exhaust should exit under water to give more thrust.
@vardoosh5305 4 жыл бұрын
This is like a movie, great plot, it is interesting and cool but then the ending .. the ending is not what we expect.
@kotofei7777 5 жыл бұрын
отличный механик - но начинающий кораблестроитель :)
@ALMGREGOR 5 жыл бұрын
С водоизмещением промашка вышла
@Razorbill_ 5 жыл бұрын
А че за двигатель у него
@kotofei7777 5 жыл бұрын
@@Razorbill_ кажись от пневмомашинки. Или наоборот - такие компрессоры есть, пластинчатые. Дуешь - крутит, крутишь - дует :)
@KenMrKLC 5 жыл бұрын
Dive!!!! Lol... Every time I watch one of your vids I end up out in the garage working on something
@TheDrakenZ 4 жыл бұрын
You guys make all this extreme, extravagant stuff.... but you spray bomb everything? Next video needs to be an automatic paintgun painting booth hahahahaha
@k.959 2 жыл бұрын
Haven’t had a vid with 3 ads before starting. This going to be great.
@helmnutter1634 5 жыл бұрын
Thats a really good boat. Did you make that boat for james bond? It had a hidden submarine mode 😂😂🤣
@BudionoSukses 5 жыл бұрын
always interesting as always: metal working, welding, turning, etc..
@herujoharudin 4 жыл бұрын
Widih mas budiono mampir disini, saya kira pecinta kuliner gak suka ngelas dan berkotor kotor ria
@LeonUnger 3 жыл бұрын
very good project. the steam turbine is paramount ! But the hull have to be improved . Bigger, lighter. A catamaran with two floaters, maybe is a better choice.
@otter7097 4 жыл бұрын
nobody commented on how beautiful that water was
@tjdot8 5 жыл бұрын
Possibly one of the most interesting things I've ever seen. I definitely respect the fact that you did not edit out the incident lol
@frankierutherford1888 5 жыл бұрын
Your skill level is mastered. I really can appreciate your work. Well done 👍
@williardbillmore5713 2 жыл бұрын
When I saw him put that big boiler on top of the gunwales I said "that boat is going to roll over and sink like a stone". I was correct.
@michaelovitch 5 жыл бұрын
The impact gun "barrel motor" recycling was a pretty good idea. I think that a lower center of gravity and a bit lesss weight would be better.
@alonzosanchez8577 5 жыл бұрын
Incredible!!! You guys are just on another level
@munched55 5 жыл бұрын
Different prop tests would get that beast really smoking. (See what I did there?)
@percival23 4 жыл бұрын
Bubbles .....the kryptonite of buoyancy
@aaronwood3540 5 жыл бұрын
Not big enough body for the weight. Make a larger body. Fill everything you can with expanding foam. And paint the dam thing green and it won't sink. Everything you've built is green and you paint this one orange. You gotta lay off the sauce brother hahaha
@KrolyteYT 5 жыл бұрын
14:21 It was at this moment that he knew, *He f*cked up*
@ltheo2000 5 жыл бұрын
-Why did you make a steam powered boat dude?? -Because I can!!
@Chesemiser 3 жыл бұрын
and im glad they did since i was actually trying to find this kind of thing and they are like the only people on youtube that has done this
@SwaTh501 5 жыл бұрын
Great to see steam used used for anything anymore. Heavy drivetrain, set that boiler at the bottom of the boat. Your work it top notch. I've been in the steam buisness my entire career, (since 1981) and always enjoy seeing steam things, your build is fantastic. Well done.
@Andy-df5fj 5 жыл бұрын
It's actually theorized that that's how ships sink in the Bermuda triangle. Namely, that bubbles rising up in the water reduce the bouyancy of ships floating on it and causes them to sink.
@viermidebutura 5 жыл бұрын
I heard this explication back in the days where fhe triangle was still famous. But later i found out that the number of ships sunken in the triangle is not higher than in other places of the world Bermuda triangle was just a myth popularized by the media
@braveheart8384 5 жыл бұрын
.You're a creative man with all the word and I wish you a good luck 👍🏻 👍🏻❤️
@antares2112L 5 жыл бұрын
Nice build but extremely inefficient and extremely dangerous ; D
@MazeFrame 5 жыл бұрын
Because a lathe is less dangerous :P
@amyyaal 5 жыл бұрын
you are extremely inefficient
@antares2112L 5 жыл бұрын
@@amyyaal (patent pending)
@daviddaddy 5 жыл бұрын
The boat is now chilling with Jack lmfao.
@daviddaddy 5 жыл бұрын
Lol i crack myself up.
@nealthomson9505 4 жыл бұрын
you should figure out a way to use the river water to generate the steam. then you could run it for as long as there is gas and you would also reduce the weight of the boat because you wont need to keep water on board, this can be done with that coil im sure of it. also have the steam exhaust in the water to assist with propulsion. this is a phenominal build sir, well done
@prabhijitdhal8176 5 жыл бұрын
12:36 RIP Earphone viewer
@dabosssr24 5 жыл бұрын
I was expecting 150mph then watch to end and it goes 5 mph. Awesome build but expected a lil more speed out of it.
@Kingsoupturbo 5 жыл бұрын
Building the steam turbine motor from scratch was pretty impressive!
@evgenyryzhov2988 4 жыл бұрын
да в конце пармезонского балета титаник все таки пошел ко дну))))
@tafadzwamutizwa9102 5 жыл бұрын
Great video Tragic ending tho 🤣😂🤣 now you need to make another video performming a salvage operation....
@MCsCreations 5 жыл бұрын
Beautiful job, dude!!! 😃 More rc stuff, please!!! ❤
@tonyharmon5753 2 жыл бұрын
Love the idea, how about a full size boat with twin paddle wheels using your tracked chair differential to make each wheel operate independently call it your paddle chair ;)
@erinboatguy 4 жыл бұрын
Oh look the fish are playing with your boat now
@jornalnumero125 5 жыл бұрын
4:15 you build a jet engine. Add the turbine and compressor to generate more thrust.
@chefmike4414 5 жыл бұрын
Nice build, unfortunately I can walk faster. I really thought it was going to zip.
@ravenhhca 5 жыл бұрын
Next time tie a plastic bottle on a line and tow it behind the boat....makes recovery somewhat easier.
@fliptop62deceived95 4 жыл бұрын
Up size hull with carbon fibre , match prop to drive capacity , balance point 29% from back of transom. Adjustable drive angle. The need for speed!!!!
@ACDCMARINE 5 жыл бұрын
Bro that was such a great ending I was laughing my ass off
@NitroTom91 5 жыл бұрын
Prop is running in cavitation. Also I think the motor is crazy inefficient in comparison to a steam piston drive. Really cool project though. I would love to see you improve the design.
@DoItYourself-DIY 4 жыл бұрын
good boat. I like it
@ulrichmachtle4864 Жыл бұрын
I like the direct drive without a steam piston engine. much less weight this way, great!👍👍👍
@GregoryHouse621 5 жыл бұрын
I loved The end! Made me remember a movie😂❄🌊🗽😭💎🚢🙈🙉🙊💩
@jericmokz8912 5 жыл бұрын
Meanwhile other guy makes a styrofoam boat, put a battery, electric motor and a propeller. Boat goes too fast and sliced the river in half 😂
@gavinm7446 5 жыл бұрын
This boat has the power to go fast but it cant because the prop is too high, I build fiberglass rc boats and many of my first boats were cavitating just like yours(sucking air and creating a pocket of air around the prop) if you simply drop the prop 2-3 inches lower, I garuntee you could hit 10mph👍😁
@monkemonke9048 2 жыл бұрын
never expected that steam could make that much power
@fra5797 5 жыл бұрын
where is the old heavy metal music??!
@Redneckmfg 5 жыл бұрын
and what happened to the GREEN paint ??? Times are changing I guess ?? LOL
@garyjones7198 5 жыл бұрын
I hate orange... lol..
@serkisdav 5 жыл бұрын
Every color shows the peject type, orange for speed or drivable projects, green for machines that will used to build thinks and etc..
@rompdude 5 жыл бұрын
Hull is too small/heavy it cant plane properly. otherwise cool build. nice idea.
@abderrahimkessira5352 4 жыл бұрын
Use gearbox to rise, decrease and reverse rotation ... in a bigger scale, we all know you can do it 😃👍
@76AERDNA 3 жыл бұрын
how nice to see your videos.see working with the lathe. I remember when I was a turner and I worked to overhaul machine tools. Che bello vedere i tuoi video.Mi ricordo quando facevo il tornitore e lavoravo per revisionare le macchine utensili🇮🇹
@btsff5330 5 жыл бұрын
According to the size of boat the propeller size was small
@OperationAllOut 5 жыл бұрын
Instead of direct steam drive, a piston model would have more efficient , RPM to torque ratio..
@tenlittleindians 5 жыл бұрын
kzfaq.info/get/bejne/rsqViMhqr8mmhok.html
@davidbeyers7674 5 жыл бұрын
Brilliant! Add a pound of C-4 and you got a real winner for keeping the jet skis away.
@larrylund2682 5 жыл бұрын
It's a Sinker!!!! Fun build.
@andreasglatthar2813 5 жыл бұрын
nice project. but you should work on your tig skills a bit. they look a kinda rough, especially on the small stuff. also no need to use the pulse function all the time. otherwise great work
@unknownsniper399 5 жыл бұрын
It sank because it was painted orange and not green lile.all your other projects 😂
@pipc4754 5 жыл бұрын
The Workshop stuff seems to get the Green and the mobile stuff like bikes and boats seem to get the Orange. Just my observations.
@wmden1 2 жыл бұрын
Nice job all the way through, especially the fine thread cutting, and the engine. I was thinking, when I saw how low in the water the sides were when you turned, that you might should fill the empty spaces in the hull with styrofoam, if you wanted to keep the large fuel tank. I hope you had an easy recovery. With your design and the materials you used, there shouldn't have been much, if any, water damage. Very enjoyable video. Thanks.
@pedrocast741 4 жыл бұрын
I liked the end of the video¡¡¡¡¡¡ Unexpected end, James Bond type, the boat becomes submarine ¡¡¡¡¡¡¡¡
@mariliaranielly 5 жыл бұрын
Eu sei que isso foi de propósito, para fazer a parte 2 do barquinho RC 👍
@Elimarzordan 5 жыл бұрын
Kkkkk Realmente, fala ai BR
@mariliaranielly 5 жыл бұрын
@@Elimarzordan tem Br nos 4 contos do mundo 😆👍🇧🇷
@Elimarzordan 5 жыл бұрын
@@mariliaranielly Hahaha, é desse jeito mesmo.
@EASYALEX 5 жыл бұрын
wow what a nice video!!!!
@unimatrix82 4 жыл бұрын
I don't think there is enough metal in that boat. [ Heavy Metal music gets stronger ]
@doncunningham2295 4 жыл бұрын
Add an aeration tube to the prop and she will go A LOT faster. You can fine tune performance from there.
@dimitar4y 5 жыл бұрын
You're a TIG GOD.
@EnglishTurbines 5 жыл бұрын
Please amend the title to "Steam Turbine Boat".....Nice engineering, I think you need a larger propeller for it though.
@bazza10198 3 жыл бұрын
love the use of the brake pipe flaring tool clamp
@MazeFrame 5 жыл бұрын
Probably the only steam boat with an afterburner.
@yurishchedrinov8401 Жыл бұрын
Интересно!👍 Чтоб совсем не утонула поплавочные отсеки сделать и прикрыть сверху по максимуму.
@andreaboggia 5 жыл бұрын
Nice work! but i think you need a more big propeller! Add some weight at the bootom of the boat, for example a lead casting directly fused on boat
@dwwndf 4 жыл бұрын
Once, in a science lesson, I thought to make a steam boat, not even RC. Yet, I never do. Great to see it done. Thanks!
@jacksonms212 4 жыл бұрын
really getting the hang of that tig ... looks good
@V843v3r 5 жыл бұрын
i would suggest moving the water tank lower into the hull and just have a pipe that redirects the flame,you center of gravity seems a little too hig, the boat was pretty tippy. also some foam or weld some enclosures inside the hull in spaces that are ocupiecd could save the boat from the sink in the end lol
@frednel4326 2 жыл бұрын
Yes it was satisfying to watch the build and test and even more satisfying to see it sink like a rock as I thought it would with that huge gas bottle in it lol 😂👍.. im a boilermaker/welder and ur welding passes the pressure test, I've seen guys go back multiple times to tack leaking places up till theres no more leaks lmfao, I love working with metal and you have done a good job here with everything and I had as much fun watching this as you had building and testing it.. submarine mode was the highlight for me , I was watching pop pop boat builds and ended up ere actualy 🤣😂✌
@OKSZAelectric 5 жыл бұрын
Beautiful place and next great realisation.
@aphos9709 5 жыл бұрын
Великолепный финал :)
@residentevil1067 3 жыл бұрын
Судостроитель из тебя не самый лучший 😁😁😁😁 за работы лайк👍👍👍
@Udo-Nbg 5 жыл бұрын
Maybe a bit of cavitation on the Propeller? try a more flat Angle on the propeller or reduce the Propellerspeed (greater Gear Ratio).... A fine Project, respect.
@steverampey 5 жыл бұрын
Foam body will lighten alot of the load and increase the buoyancy. Bigger boat and prop should be an interesting speed boat.
@fabioconte9326 4 жыл бұрын
a longer propeller shaft or change the end of the hull to have a more hydrodynamic propensity to flow the liquid. try to lower the center of gravity by placing the boiler on the bottom of the boat
@justinlacapria2898 5 жыл бұрын
What would be even cooler is if it was totally steam powered. Like on the inside if the prop shaft drove a generator (dc motor) to charge and power the battery for the servos.
@johnburrows7938 4 жыл бұрын
As a build, amazing...as a boat, as I’ll fated as the titanic...lol
@abovegroundgarage 4 жыл бұрын
This guy has spent his entire life outside the box
@bensharp575 5 жыл бұрын
That is so cool. Wish I could afford a machine shop. Learned to do it in school shop.
ABRACADABRA TV
Рет қаралды 8 МЛН
Camden Bowen
Рет қаралды 1,1 МЛН