S&B silicone cab body mounts install Ford Super Duty

Рет қаралды 9,788

PrOjEcTs Pat

2 жыл бұрын

Changing my old deteriorated cab body mounts on my 08-10 F450 Fummins project truck.

Пікірлер: 21

@btwbrand 9 ай бұрын

The center cab mounts made of rubber are not a problem and don't need replacing unless you can't remove them like was shown in this video. If you can't separate any mounts then put on safety glasses, thread in the bolt into the stuck mount from the direction you removed it, then raise the body to apply pressure and hammer on the bolt head, they pop apart easily. The step rail on the cab is designed to support a person, not the cab. Lift on the cab directly with a 4x4 or similar. The step rails bolts can sheer and drop the cab on you when your hands are in a bad place. While pricey these are the better mounts to use, you could spend 20% of this cost and get mounts that will ride stiffer and may have loud squeaking noises, but anything is better than the factory mounts when they deteriorate.

@lateatday9826 6 ай бұрын

I wondered why my 2 center ones looks different, I couldn’t get those 2 apart and ended up with an angle grinder and a hammer wish I would have seen this

@medicsimmons80 2 жыл бұрын

Getting ready to do these this weekend on my 2012 f250. Thanks for the detailed video, I know it will help when I get started

@johndoe1765 Жыл бұрын

Thanks Man you showed me a lot take care.

@ProjectsPat 6 ай бұрын

no problem thanks!

@Potrvlb Жыл бұрын

Dude where’s the update vids for the Fummins install??!!! Can’t leave me hanging, brother 😮………… what’s the status?

@ProjectsPat 6 ай бұрын

haha, getting back to it soon. need $ for parts!

@edwardeplett3231 Жыл бұрын

You doing a frame off restoration 👍

@ProjectsPat 6 ай бұрын

ha sort of i guess

@jenniferchrisharmon8795 Жыл бұрын

How about the ones on Amazon for 385.00? Beech lanes? They say they are identical to s and b mounts.

@ProjectsPat Жыл бұрын

I guess maybe as long as they are silicone.

@NG-Star Жыл бұрын

In the end, did you buy the Amazon option? How did it go?

@jamesfranks3267 7 ай бұрын

I did and they are just as good as the s&b if not better

@jamesfranks3267 7 ай бұрын

Beech lane are the way to go cheaper and just as good if not better

@bthorn5035 11 ай бұрын

Did you have to disconnect anything like the steering column?

@bthorn5035 11 ай бұрын

Also, did you loosen all the mounts before focusing on one side?

@ProjectsPat 6 ай бұрын

yes to give some slack

@ProjectsPat 6 ай бұрын

no only the mounts.

@FunKingGarage 2 жыл бұрын

Mine were so bad the front of the cab sank to the frame and was blocking the hood release. Ford factories are terrible.

@ProjectsPat 2 жыл бұрын

Dayumm! A body drop kit ah?

@ProjectsPat 2 жыл бұрын

We both have new channels. We should do collab later on for an overview of our builds or something. I'm in FL also.