Promaster side door won't open FIXED! How To

Рет қаралды 31,397

4 жыл бұрын

Promaster sliding door won't open? Here is what was wrong with mine and how to fix it! Stay tuned for more promaster videos!

Пікірлер: 51

@MarlonJones-kc5mc Жыл бұрын

Worked like a charm. Dealer told me it was the hinge in the floor and I would have to remove the floor first. This was Very helpful. Thank you.

@jonspurgfin7229 5 ай бұрын

Thanks this video was huge! The part at the dealership was $385, I ended up finding it on line for $45. The parts guys at the dealership were cool and helped me figure out the part # and printed off a quote and kinda gave a wink wink go buy it somewhere else vibe. I ended up replacing the cables too because the parts guy at the dealership told me my problem was probably stretched cables... it wasn’t, the latch mechanism was definitely broken inside and I had to bust it open, but I figured while I was at it I would replace the cables too. Thanks for this vid though!

@jeffreywhite1166 5 ай бұрын

$45.98 for the part via Amazon, and 24 hrs later, door is fixed! Thanks so much for this video!

@alexanderkasyanov4946 11 ай бұрын

thanks for sharing valuable info! just my 2 cents to anyone who may have the same issue. Before you bust anything, do check if nothing got jammed the door. In my case it was the weatherstrip that came off and got jammed between the door and door frame causing the door latch to be under pressure jamming it. all i had to do is to pull that weatherstrip out and then i was able to open the door. otherwise, the issue was exactly as described in this video and I was getting ready to bust that latch when i - lucky me - noticed that weatherstrip being out of place.

@anthonywolbert1973 Ай бұрын

I pulled the weather strip out hoping that would free up the lock. But no, in my case the problem did require smashing the thing to open the door. Stupid design.

@timmills4074 Жыл бұрын

Thanks bud! I've been beating my head against the wall trying to figure out how to get it unlatched. I had a thought that I would have to bust that part open to get it to work. Thanks again.

@funzeevanzee Жыл бұрын

Thanks for posting

@RCmaxxUK 6 ай бұрын

Appreciate the video/ advice. Cheers👍

@kenm3456 4 жыл бұрын

Good video, thanks!

@DualsportDisport 3 жыл бұрын

Thanks Ken M!

@lamartimmins9854 3 жыл бұрын

Having this issue now. thanks for te vid

@DualsportDisport 3 жыл бұрын

Glad to help out man subscribe if you wanna see more promaster problem solving. Good luck on your repair!

@kitewaldo Жыл бұрын

I have problem that my top latch is not opening from outside, but it does work from indoor handle… ?? What could be wrong?

@timlee8179 3 жыл бұрын

Thanks for this video. I'm having this problem and having to replace the latch housing but there seems to be two part numbers for the same part (68226180AD and 68226178AD) for my 2017 Promaster 1500. Do you remember the part number you ordered? Can you share where you ordered this part for your fix?

@DualsportDisport 3 жыл бұрын

I don't have the number but I ordered it from the dealer using the vin number

@timlee8179 3 жыл бұрын

@@DualsportDisport Thanks

@dennisleach588 4 жыл бұрын

Hey Nate really enjoyed your video I’m having problems with my doors as well hopefully this will help he can you show how the cables connect to the inside and outside door latch it would really be helpful to make mine was all disassembled by the dealership and when I chose to not pay $2000 for them to fix my door I just left everything a mess thanks for your help Dennis

@DualsportDisport 4 жыл бұрын

Hey I will try to get that tonight

@dennisleach588 4 жыл бұрын

Nate Thanks Nate I really appreciate that it’ll help I still haven’t been able to get my door unstuck I I was able to get the two mechanisms to release that you showed in your vehicle but my door won’t even budging a16th of an inch if you have any other suggestions I would sure appreciate it I was wondering if maybe it’s something that’s electrical or magnetic I just don’t know I talk to two different dealerships and they absolutely refused to give me any information to help me thanks again Dennis

@DualsportDisport 4 жыл бұрын

@@dennisleach588 take a hammer and screwdriver and bust that cover off where the end cable goes in, then shove the screwdriver way down in there by the latch mechanism and pry around. That's how I got mine but it took some time

@DualsportDisport 4 жыл бұрын

@@dennisleach588 kzfaq.info/get/bejne/gNaZmtqnvcWqgo0.html

@dennisleach588 4 жыл бұрын

Nate Hello Nate thank you so much for your advice and your guidance I was able to bust up the mechanism I had to get it and then it was as simple as reaching out and barely touching the latch mechanism and the door popped right open so I got the new lock system in everything works except for the fact that I cannot unlock the doors with the key fob any suggestions and thank you again for your help I can manually lock the doors I can lock them with the key fob I can manually unlock the back door with the key but I cannot unlock the doors with the key fob

@mars_mystic_2320 3 жыл бұрын

Does anyone know what this part number is?

@6xevette 3 жыл бұрын

Can you do a video on the transmission flush?

@DualsportDisport 3 жыл бұрын

i will shortly in the future

@alanbutterworth4219 3 жыл бұрын

Thanks, mine's stuck and all the other doors are mechanically deadlocked from the inside. Do you think if I drill say a 3" diameter hole near the lock mechanism, I could flick the bottom latch and open the door from the outside? I was adding insulation to the door as I'm converting it to a campervan, when the door slid shut very slowly. I might have dislodged the cables from the handle or insulation might have fouled the mechanism.

@DualsportDisport 3 жыл бұрын

It's hard to say, flipping the latch for me wasnt enough. I had to literally destroy the latch with a screwdriver and order a new one.

@adrianpietraru 3 жыл бұрын

thanks for posting this. My slide door is still stuck and won't open even when moving the bottom linkage by hand. Clearly the mechanism assembly is broken in mine as well, however none of the linkages work (i tried both). Do you have any suggestions that may help? Thanks for your reply in advance.

@DualsportDisport 3 жыл бұрын

Take a screwdriver and bust the whole area around the latch apart. This is how I had to work mine

@adrianpietraru 3 жыл бұрын

@@DualsportDisport Thanks! So just to be clear, the bottom linkage will disengage the door latch ONLY when the mechanism assembly is in working condition? I will break it apart today and see how it goes.

@DualsportDisport 3 жыл бұрын

@@adrianpietraru correct. Destroying the old one is the only way I got mine off

@rlepiten 3 жыл бұрын

Thanks for sharing this Nate. In your demonstration, after you pressed/hit the bottom mechanism at 2:29, it seems you touched something else after to open it. What part is that? Is it possible to indicate or point it on the the broken/removed part in 1:42

@DualsportDisport 3 жыл бұрын

Please watch pt. 2 of this video and it should clear the rest uo

@manu80182 3 жыл бұрын

Hey thank you for your vid. I need to replace a cable (the blue cable going out of the locking mechanism, ie the horizontal one going to the interior handle). It is possible to replace it or do you have to break the plastic box as you did? In other words, is it sealed or can it be disassembled? you're talking about a screwdriver and hammer but I did not understand very well... thank you!

@DualsportDisport 3 жыл бұрын

Just now noticing this.. yes I think you can take it apart if you are able to get the door open and take the latch assembly out of the door. This will allow you to change the cable from what I can tell but I know when I got the new lash from the dealership it came with the cable already installed so I don't know if it's a different part number or not. I hope this helps thanks for watching

@manu80182 3 жыл бұрын

@@DualsportDisport thank you! I will take the latch assembly out of the door and try. I think the cable is sold with the latch. But I am gonna use a different cable (that I still have to get) because I want to install a different inner handle in the middle of the door. I need to see how the cable end inside the latch assembly looks like in order to get a cable with similar cable end on this side and a cable end compatible with my new handle on the other side. I believe the cable end inside the latch assembly is like a hook with a 90 degrees bend. Do you remember that? Can you confirm? Thank you!!

@DualsportDisport 3 жыл бұрын

Yes it's a 90 degree s type . Glad to help! Subscribe if you want to stay tuned to more Promaster tips and tricks and fixes! Thanks

@manu80182 3 жыл бұрын

@@DualsportDisport I have removed the latch + unscrewed the casing but I cannot open it. It seems sealed or needs some force to open. Does the cable end look like that? www.ebay.es/itm/273740433928 I don't want to put too much force on the plastic casing and I may leave it like that and try to adapt the existing cable end on the other side to fit my new handle instead. It depends on whether I have a chance to find a cable that fits. Thanks

@manu80182 3 жыл бұрын

For those who may be interested : to take the cable out of the latch, you need to slide the cable towards the right (when you look at the latch from the cable point of view), with some force (use a screwdriver to act gently as a lever). It comes with a triangular plastic piece which is actually part of the cable. It is an issue to remplace this cable with another reference, because of this plastic part which is part of the cable housing & prevents dust from entering the latch.

@whitewaterchristo 5 ай бұрын

Sorry to be thick headed, but after watching a bunch of times, I don't understand what busting it open does to allow you to use the bottom linkage to open the door? Was that to identify which linkage opened the door? I can move that bottom linkage, without busting it, but the door still won't open! 🤷

@jonspurgfin7229 5 ай бұрын

I think it was to just identify how it was supposed to work, and your problem means it’s broken inside the mechanism. I could move the linkages too, but had to bust mine open to get the door to unlatch