prop/shaft removal underwater

Рет қаралды 879,961

warner diving

3 жыл бұрын

pulling star board prop and shaft on a 34' searay

Пікірлер: 92

@SalsaSippin_ Жыл бұрын

I've been a diver for 4 years, and it's rare to have a prop pull go this smooth. Excellent job, the tapping made all the difference. That prop puller is f****** sick!

@warnerdiving Жыл бұрын

Thanks yeah you wanna tap on it to give some vibration helps pop it off 👍🏻👍🏻

@grimblegromblethegnome 2 жыл бұрын

This is one of the more fascinating videos I've seen. You ever drop tools and have to dive down to the bottom to get them? The murkiness of that water is unsettling haha.

@warnerdiving 2 жыл бұрын

Thanks man yeah I’ve dropped tools occasionally. I’ve even done it in some of my other videos haha 😂

@martinc6987 2 жыл бұрын

thats the third video I watch about removing a prop,and you are the only guy actually using leverage and laws of physics/engineering to do the job. Its fast and easy ! Nicely done .

@emilbachew9813 4 ай бұрын

RESPECT FOR PROFESSIONALLY DONE WORK!!!

@mchaves7663 2 жыл бұрын

Fantastic coordination. Certainly not the first time. Well done

@doyleadams3390 2 жыл бұрын

Nice work tuff job good skillz I would hire you any day bud keep up the good work

@GhostyTheAlpha 5 күн бұрын

So smoothly., Quick question what you is rate in the state you live in. Thanks in advance!!

@JayMoneyRadio 2 жыл бұрын

We are going to get along great nice work

@TimmyTimmyS 10 ай бұрын

Where did you get the prop puller from?

@ero3112 2 жыл бұрын

Thx for sharing. Something New for me

@a2022z2 3 ай бұрын

Excellent work. Have a question. Every time they have pulled a propeller on the hard they use heat to make it pop. Under the water it seems the propeller comes off a tad easier. Is that true?

@GustavoSantos-uh5yl 2 жыл бұрын

Have you ever fixed or cleaned big propellers? I want to know how it is the feeling about being in front of. Did you feel fear? How to deal with it? How it was your first time in this job? It gives me chills only imagining!

@warnerdiving 2 жыл бұрын

When I first started it was a little creepy being under there. But after 20 years of doing this work I’ve gotten used to it 👍🏻

@AbdelrhmanSharif 17 күн бұрын

what is the tool to that you used to pull out the shaft ? Name please

@sk8083r 11 ай бұрын

Awesome job man!

@warnerdiving 11 ай бұрын

Thanks!

@alexandreboudet491 2 жыл бұрын

Nice job ! Good and fast 💪

@JustJohn505 2 жыл бұрын

is scuba gear always needed or do you think you can do it with a snorkel?

@warnerdiving 2 жыл бұрын

I mean it could be done but it would take a lot longer

@Spnanbargal 2 жыл бұрын

Wow nice video

@ggsmith48906 2 жыл бұрын

That's pretty impressive! I would think those heavy tools would take you straight to the bottom! LOL And if it were me, I most certainly would have lost the nut or the shaft key... And time-wise, in comparison, it took me three hours to remove the stuck rear rotor on my Dodge Caravan...working in the garage, on dry land, without the burden of scuba gear...lol

@warnerdiving 2 жыл бұрын

Thanks! What you don’t see in the video is my feet kicking furiously to stay afloat 😁😅 Luckily this job went super smooth and made for a great video, I’ve done others that took a lot longer 👍🏻👍🏻

@jonny-b4954 Жыл бұрын

@@warnerdiving Bet you had sore thighs for a couple days haha was this done like this simply for necessity? No place to dock at? Interesting video.

@warnerdiving Жыл бұрын

@jonny-b I do these for a local mechanic I guess he needs the shaft out of the way to work on the transmission. Doing it in the water saved the haul out fees plus lay days in the ship yard. The shaft was out for 2 weeks

@mahdiiraqi3292 2 жыл бұрын

God job

@adc-professionalunderwater7775 Жыл бұрын

Shaft removal what was used to plug shaft hole? Any issues with packing.

@warnerdiving Жыл бұрын

Plugged from both sides with wooden bungs

@mickcy9954 2 жыл бұрын

Should use WD40, quick spray on the nut and threads, leave it to soak, job done !

@mikeyoung4427 2 жыл бұрын

THE SCRATCHING AT 8:34 OH MY GOD NOOO MY EARSSSS

@warnerdiving 2 жыл бұрын

😅😅😅

@HereFishing 11 ай бұрын

Can the bearings be replaced while under water like this?

@warnerdiving 11 ай бұрын

Yes 👍🏻

@dionmorrow5271 Жыл бұрын

Great video. Why did they need removed?

@warnerdiving Жыл бұрын

Mechanic needed the shaft out to work on the engine 👍🏻

@dionmorrow5271 Жыл бұрын

Oh ok cool. Gonna learn how to dive one day, but got to learn how to swim first lol. Want to see great barrier reef one day

@greghart9142 2 жыл бұрын

What materail do you use for the plug

@warnerdiving 2 жыл бұрын

It was a wood bung. I wrapped a cloth around it because the one I had was a little too small. Also the mechanic plugged it from the inside, not sure what he used 👍🏻

@greghart9142 2 жыл бұрын

@@warnerdiving thank you so much. Going to repair it today

@danieljefford6497 3 жыл бұрын

Well that just saved me a dry dock

@djlowtek 2 жыл бұрын

OH man wearing headphones with that 8:29 metal on metal scraping gahhhh

@andreasnik Жыл бұрын

молодцы хорошо сработано.

@warnerdiving Жыл бұрын

Thank you 🙏🏻

@tarcisiopinto7897 Жыл бұрын

Dude do you use air compressor to breathe?

@warnerdiving Жыл бұрын

Yeah I have a compressor mounted into the skiff I work out of it runs off of (4) 6 volt batteries

@Yanto-Kun-JP 2 жыл бұрын

o.O why not do that on land/dock? after remove the shaft, engine room will get flood :(

@warnerdiving 2 жыл бұрын

The openings are plugged up from both sides to keep the water out. Cost a lot less to do it in the slip otherwise would have to pay for a haul out and lay days in the shipyard. Shaft was out for 2 weeks so the mechanic could work on the engine 👍🏻👍🏻

@julianradillo84 2 жыл бұрын

Another successful day in the Bayside!

@wilnstevenson5957 Жыл бұрын

Excellent video, job went nicely. Is the scissor puller your favorite? Vs the C-Clamp, Walter (u-shaped & solid plates with long bolts), or other pullers?

@warnerdiving Жыл бұрын

I like using the algonac (scissor puller) because it’s quick and easy to use but the plate puller is a better puller it’s stronger and pulls straight. The algonac only works for 3 blade props. 4 blade props usually don’t have enough clearance between the blades

@wilnstevenson5957 Жыл бұрын

@@warnerdiving Thanks, great info ! I forgot to ask about one other puller, the 'Prop Knocker'. Have you tried that? I'm going to buy a prop puller for my boat (KK39) and appreciate your experienced advice. I realize the prop knocker will fit only one size shaft.

@warnerdiving Жыл бұрын

I’ve never heard of the prop knocker so I looked it up. not sure how well it would work. But for the price of one wouldn’t be much loss if you tried it out and it didn’t work. Looks like it uses vibration to unseat the prop, which I usually do when the puller is under load (tap the hub with a hammer)

@wilnstevenson5957 Жыл бұрын

@@warnerdiving Some swear by them, say they work every time; others say whacking the end of the shaft will damage the transmission output/thrust bearings. Dunno.

@junaidashraf3888 2 жыл бұрын

Good work,but all tools must with you,go up down again and again

@livenfree 2 жыл бұрын

What was wrong with it it?

@warnerdiving 2 жыл бұрын

Nothing the mechanic needed it out to work on the transmission 👍🏻

@garden0fstone736 2 жыл бұрын

@@warnerdiving underwater? Or hes gotta pull out driveshaft?

@garden0fstone736 2 жыл бұрын

@@warnerdiving disregard that

@JK360noscope 2 жыл бұрын

This makes me want to buy me a full suit for my own maintenance needs...

@XJtrytodo 2 жыл бұрын

good

@Bobcat707 2 жыл бұрын

Нахуй я это досмотрел до конца? Лайк на всякий случай оставлю

@oddjobbob8742 Жыл бұрын

Is your prop puller made using a turnbuckle? The threaded end near the prop, you can sort of see it at 3:13

@tarekferraz9400 2 жыл бұрын

Good

@brandonwilks5019 2 жыл бұрын

I wonder if a prop removal is the equivalent of a boot on a car.......

@brandonlatif6512 3 жыл бұрын

Is that a 330?

@stephaneracicot791 Жыл бұрын

hey man good job ok il ask sharks any big one around just asking take care and good job

@warnerdiving Жыл бұрын

Thanks man I haven’t seen any in the 20 years I’ve been out there but you never know haha 😅😱

@Vlad-Gromov 2 жыл бұрын

класс

@lt.lasereyez8891 8 ай бұрын

Guy is not even out of breath at any point

@irinachiselenco3574 4 ай бұрын

He has a oxygen tank

@lt.lasereyez8891 4 ай бұрын

@@irinachiselenco3574 totally not hard work underwater at all...

@badjaeaux 2 жыл бұрын

what about the shark 🦈 behind you

@warnerdiving 2 жыл бұрын

He’s ok he doesn’t bite that hard 😁

@vinternet3588 2 жыл бұрын

Главное гайку не уронить

@warnerdiving 2 жыл бұрын

If I do I will hire a diver to retrieve it 😉😅

@EnzoGabriel-wn4jx 2 жыл бұрын

Brasil

@rapunzelsworldbutinadiffer1023 2 жыл бұрын

8:29 my ears hurt

@warnerdiving 2 жыл бұрын

Nails on a chalkboard lol 😅

@rapunzelsworldbutinadiffer1023 2 жыл бұрын

Yes

@franklingold1953 2 жыл бұрын

Far cry geam

@user-vu7yf6cz1v 2 жыл бұрын

Ещё один вариант как можно потопить лодку!!! А на берег нельзя было вытащить это корыто?

@warnerdiving 2 жыл бұрын

Well the boat didn’t sink so everything is good 👍🏻 👍🏻

@clementgoetke2385 2 жыл бұрын

i would have pulled the boat

@SalsaSippin_ Жыл бұрын

Why waste your time, or pay $800 if you have to use the hoist. Just have a diver do it for a few hundred dollars.

@Alcineijv 2 жыл бұрын

@Ummmmmkay88 2 жыл бұрын

Be gentle with the shaft