Propane Forge Build - Using a Gas Bottle and a Kit
Рет қаралды 5,522,016
5 жыл бұрынMy Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
I've always wanted to build a decent forge and I finally got around to it. There's going to be some fun times ahead, learning and making all sorts of cool things!
The kit worked out awesome! It was great having everything in the kit made to fit a 9kg gas bottle. There wasn't any guess work or ordering more material than what was needed and it also has the same burner that Alec Steele uses (I believe). It's a nice bit of kit!
I got the kit from GameCo Artisan Supplies. They were also very helpful in guiding me through the process of the build, answering questions along the way.
www.artisansupplies.com.au/pr...
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
@paulvalley2125 4 жыл бұрын
My grandfather was a lead blacksmith for a Coal Company in Pennsylvania. I wish I could have met him I wish I could have learned some of his trade but I always enjoy a true Craftsman like yourself. How can you possibly see and envision a project so far ahead. You're a true fabricator and a true artist.
@PaskMakes 5 жыл бұрын
JUST TO CLARIFY BECAUSE I'M GETTING SO MANY COMMENTS ABOUT IT. DO NOT GRIND A GAS BOTTLE THAT HAS HAD GAS IN IT. I PUT A CAPTION IN THE VIDEO STATING THIS WAS A NEW BOTTLE (NEVER HAD GAS IN) AND I HONESTLY CAN'T BELIEVE (OR DON'T WANT TO BELIEVE) THERE ARE PEOPLE STUPID ENOUGH TO CUT OPEN A USED GAS BOTTLE (WITHOUT PROPER STEPS)! I've always wanted to build a decent forge and I finally got around to it. There's going to be some fun times ahead, learning and making all sorts of cool things! The kit worked out awesome! It was great having everything in the kit made to fit a 9kg gas bottle. There wasn't any guess work or ordering more material than what was needed and it also has the same burner that Alec Steele uses (I believe). It's a nice bit of kit! I got the kit from GameCo Artisan Supplies. They were also very helpful in guiding me through the process of the build, answering questions along the way. www.artisansupplies.com.au/product/large-gas-forge-refractory-burner-kit/?c=22783a5940ef
@ManCrafting 5 жыл бұрын
Pask Makes hey Pask the Making Time Podcast is having a “no forge” forging challenge. The idea is to get people interested in the black arts. I mean Blacksmithing with just the things most people have available. Building a forge is allowed. 👊🏼
@WUTANG-CLAN 5 жыл бұрын
Alec's a top bloke isnt he, but check out Sam Fowler, his old mate, he has a variety of kits/parts, fully assembled forges etc for sale on forgeburners.com
@ryanj.hanson6920 5 жыл бұрын
This is a great video, start to finish. Thank you for taking the time to make, edit, and post all your videos. As for "stupid people", my brother is a firefighter. He responded to a garage fire where, get this, the guys working on a car used a cigarette lighter to check the fuel level in the gas tank. Hence why my brother says, nobody calls the fire department for doing something smart.
@meinkamph5327 5 жыл бұрын
Why didn't you add how long it will smell like the strongest gas smell there will ever SMELL!
@meinkamph5327 5 жыл бұрын
And to add one more thing. I've made a pot belly stove out of propane tank. But used a 100 gallon tank and cut it down. The wall thickness is alot thicker. It seems to me if some one would spend all the time editing you would construct something that would last. Every time you heat up and cool down you lose a little material in your cylinder. But good job with following whatever directions you were following.
@richardmilne8733 4 жыл бұрын
Thank you very much for this video. I am the metal shop co-ordinator for the Moss Vale Men's Shed Inc. and we have just purchased the kit to make a forge. This video is going to make our job a whole lot easier. Also I am enjoying your knife making vids too. Keep up the good work; and again, many thanks for sharing what you do!!!
@daos3300 4 жыл бұрын
very elegant. love how it's not unnecessarily overbuilt and therefore not stupidly resource wasteful. other builders take note.
@sbjennings99 4 жыл бұрын
I agree he did an excellent job.
@linkswoop 5 жыл бұрын
Nice forge cobber. Love how you have gone with an Aussie designed torch. Beets my brick and charcoal in the ground. Can't wait to see what you make
@PaskMakes 5 жыл бұрын
Thanks very much mate - glad you like it! :)
@Just1GuyMetalworks 4 жыл бұрын
Honestly, one of the nicest little, low budget forge builds I've seen so far. Glad you actually made an effort to contain that Kao Wool. Well done!
@wolfparty4234 4 жыл бұрын
I’ve been a fan of your channel for a while now and just finished watching 4-5 of your videos. I must say that you have a way of making your builds look like anyone can do it. No stress, pressure or overwhelming feelings at all!!! Thank you for sharing your builds and inspiring people the way you do!! Hope all is well now with you and community down under.!!?!!👍🏻👍🏻
@danedwards6946 4 жыл бұрын
This video is like the movie Patton for me. Every time it comes up on my feed...I have to watch it. That is just too cool
@zackbrumis7831 5 жыл бұрын
I have no intention of ever making this, but WOW, excellent video! Beautifully made. Very slick.
@miguelduran7281 4 жыл бұрын
Ah good ol slick Rick
@stonedhomer621 5 жыл бұрын
It's one of the most beautiful things I've ever seen, I tell yuh hwhat.
@badlandskid 3 жыл бұрын
Dang it Bobby! Propane and propane accessories.
@anthony10370 4 жыл бұрын
Thats a great way of drawing straight lines on a curved surface, thanks for sharing that.
@danielmcmaster5701 2 жыл бұрын
I’m building this atm, this video is a fantastic instructional. I’d never even welded anything prior to getting a mig for Father’s Day a couple of months ago. You rock Pask!!!
@marcusretaken72 5 жыл бұрын
What a great project! I have it saved for future reference, and thank you for sharing all of your experience.
@PaskMakes 5 жыл бұрын
No worries Marcus! :)
@kroscuro 5 жыл бұрын
Great design and workmanship. Bravo..
@TheFootbaldd 3 жыл бұрын
Nice work, you have a lot of crazy projects that often are very time involved, but this one is relatively straight forward in comparison. When I was younger my roommate had a forge and I would melt beer cans in it while I was wasting time in the shop. Never forged anything then, but it is never too late.
@rickjohnson7155 5 жыл бұрын
Pask... You never cease to amaze me. You have grown and offered so much over the past few years. I do appreciate you. Hey don't stray too far from woodworking eh!
@PaskMakes 5 жыл бұрын
Thanks Rick! I'll still be woodworking but I like all avenues of creativity! :)
@anthonyaztiptoenailsandspa7259 4 жыл бұрын
I did not know what he was doing until the end. Great work.
@bigstackD 5 жыл бұрын
Great work matey👍🏻. I do a heap of melting in my furnace over on my channel but I’m looking at expanding into the blacksmithing stuff making knives and stuff so this gives me good ideas on Forge designs 👏🏻😁thanks mate great vid. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@PaskMakes 5 жыл бұрын
Thanks very much mate! :)
@foredirect 5 жыл бұрын
Wow that was cool I too can’t wait to see what you’re going to build definitely gonna have to put this one on my bucket list
@thomasenigmatic4210 5 жыл бұрын
Love the craftsmanship! I do miss welding, one of these days get myself a little 110 machine for the garage.
@planbuilduse5994 5 жыл бұрын
Awesome video. Thanks for uploading!
@stevewithaphen 5 жыл бұрын
Great build! I loved watching it. 👍
@jacobsavory6685 5 жыл бұрын
Wow, awesome video! I'll definitepy have to get round go making one for myself
@gillymcgillface1501 4 жыл бұрын
I’ve watched this a few times now. Right at this point I’m in my shed just about to cut the holes in the forge. Came back here for references. Cheers for the video mate.
@DustyKorpse 5 жыл бұрын
If you are using an old gas cylinder, after you remove the valve fill it with water, this will ensure no gas is left in the cylinder. Or you may find the next step of cutting, quite interesting . 😉
@CheapSkateGamer96 5 жыл бұрын
You'll be lucky if you find the next step of cutting at all. Most people who get blown up don't even have time to say "oh shit!", before they go see the big man upstairs.
@coreyshier7526 5 жыл бұрын
So, you cut open a propane tank with a cutting torch w/out cleaning it first and you blew yourself up. Q: Is it true that when you die you see a bright light? A: if you are dumb enough to watch the explosion, Yes! Q: did you see your life flash before your eyes? A: No, but I did see pieces of the tank, my arms and the torch fly past my head!
@timtravasos2742 5 жыл бұрын
Let Darwin work!
@Dariusz69N 5 жыл бұрын
Dokładnie tak.
@yottaforce 5 жыл бұрын
It will become what is known as an open furnace
@MidLaneBoss 5 жыл бұрын
Made my own forge around 5 years ago. So much fun. I really want to see you make a power hammer. I can't figure out an affordable way to make my own, and I know someone like you could figure it out.
@PaskMakes 5 жыл бұрын
That really would be a fun project - I'll get my thinking cap on! ;)
@benw4544 4 жыл бұрын
This guy has a power hammer build that seems easy enough and that probably costs very little (kzfaq.info/get/bejne/jcWVnLeE0J2qonU.html). He sells the plans on his website, but honestly, if you have a good understanding of mechanical principles and movement, you could probably build it just by watching this or the many other videos of those who have built the same machine from those plans. I personally enjoy the challenge that comes with replicating from observation. Whilst it may not be an industrial quality machine, it's enough to get you started. I haven't built it yet, but it's on my list of things to do when I have time. Regards.
@jjbailey01 4 жыл бұрын
Davinci hammer
@ronalrocco4922 4 жыл бұрын
awesome, must be nice to have such practical knowledge and skill where your contemporaries don't have a clue! Thanks!
@ianruff6173 5 жыл бұрын
Very very cool and instructive. Thanks for posting this!
@juniordouw6681 5 жыл бұрын
Good video man love the quality of your work
@KingPostTimberWorks 5 жыл бұрын
sweet , now you can do that 20 part viking sword series :)
@PaskMakes 5 жыл бұрын
Thanks Joey! I haven't seen any of the viking sword one yet but I have been watching a lot of Alec Steele over the last few months! :)
@purrosleukos253 5 жыл бұрын
What a great video, look forward to going through your other stuff!!!!!!!!!!!!!!
@davidrussell8689 5 жыл бұрын
Excellent build , nice eye for detail and it even looks good ! Inspires me to try something similar . Thanks .👍
@ScottTurnerformeindustrious 5 жыл бұрын
Loved it! Thanks Neil. (Oh and I'm still yet to make my first forge, and now you've made two. Best I pull my finger out ;)
@PaskMakes 5 жыл бұрын
Yes mate, you'd better get on with it! ;) Thanks Scott! :)
@vandelftcrafts2958 4 жыл бұрын
If you want to make something easy and not too expensive theres an awesome video on it from essential craftsman. It only requires simple tools and can be built in a fery short amount of time. I built that forge and it works very well for the projects I use it for.
@edwinskolarski9147 5 жыл бұрын
There's nothing like making your own tools and equipment. Yes, it can be bought for less than the cost of making it but there's no pride in that. Good job!
@TheAussiePirate 5 жыл бұрын
I’ve been looking at one of these kits for a while, thanks for showing how it’s put together Neil.
@PaskMakes 5 жыл бұрын
No worries Carl - glad it was helpful! :)
@jeremyalexander1547 5 жыл бұрын
I really dig the clever use of props and text placement for getting across build specs or techniques without using dialogue. I also really appreciate the thought you put into the”cinematography” of your camera work. Maker and film artist. Oh, and the project is super cool too!
@ADVBear 5 жыл бұрын
That was an excellent build. I imagine that a forge like that will have many uses, and will serve you for years to come. I can't wait to see what you will create in the future using it!
@PaskMakes 5 жыл бұрын
Thanks Alex - I reckon it's going to be a fun addition to the workshop! :)
@mactx5374 5 жыл бұрын
Nice build. Enjoyed it. Couldn't help but close my eye when you struck an arc. Lol.
@TheTrueHasenfeffer 5 жыл бұрын
Looks great. I trust myself to use an angle grinder. I do NOT trust myself to weld. Never done it.
@curlygrain4389 5 жыл бұрын
Greetings from northern NSW! I see the knifemaking virus has spread up to Queensland now. People like you inspire the rest of us to 'make'. Thank you for the time and effort that you put into your videos matey. I'll patreon you if I survive my car rego...
@PaskMakes 5 жыл бұрын
Thanks very much Adrian! I reckon the Knifemaking bug is spreading all over, it's going to be fun learning something new! :)
@paultavres9830 5 жыл бұрын
One of the nicer forges ive seen built Good job
@mikesmith8393 2 жыл бұрын
It's always great to observe superb craftsmanship.....thanks for your time and trouble !
@WUTANG-CLAN 5 жыл бұрын
Mate, top job, Aussie made, built to last, with a touch of humour "20mm ish" loved it, instant new sub.
@PaskMakes 5 жыл бұрын
Glad you enjoyed it mate! :)
@TheSteveAS 5 жыл бұрын
Hi Neil. I discovered your channel in the last month or so and have been binge-watching all your past videos! You are immensely talented and creative, and your channel has quickly become one of my favorites! I now view your content the same way I do Frank Howarth’s - with excited anticipation and watched without distraction. Well done sir - looking forward to many inspiring projects to come!
@PaskMakes 5 жыл бұрын
Thank you very much Steve - glad you're enjoying the videos! And thanks for the high praise!! :)
@Craichy 5 жыл бұрын
I watch him like Frank Howarth and This Old Tony
@martinstrath791 5 жыл бұрын
Indeed!
@j.fernandoestrada9334 5 жыл бұрын
Nice
@timberdish 5 жыл бұрын
That's a great looking forge right there, I'm sure it'll serve you well! Can't wait to see what you've got cooking up in there, so to speak.
@PaskMakes 5 жыл бұрын
Thanks Matt - exciting times ahead! :)
@valdirdadasilvaalves 5 жыл бұрын
Impressive work Pask.
@michaelrosebud 5 жыл бұрын
Excellent job mate.....I wish I had one as I am just getting started in knife making at 73 lol....Cheers
@PaskMakes 5 жыл бұрын
Thanks Mike - that's awesome! :)
@markboza6215 4 жыл бұрын
its not how long it takes to get there thats important its getting there and having fun doing it thats most special!.
@JedidiahShultzIrishCraftsman 5 жыл бұрын
Now that’s what I call a piggy forge!😉setting the tank down and shaping the fire brick with the front edge is an amazing idea!! Fine job Neil!👍😊
@PaskMakes 5 жыл бұрын
Thanks Jed! I'm not sure if that was over the top shaping the fire brick to the opening but it was easy enough so I thought why not! :)
@JedidiahShultzIrishCraftsman 5 жыл бұрын
You’re welcome and I definitely don’t think it was over the top. If nothing else it shows that we should all be thinking outside of the box😉😊
@PaskMakes 5 жыл бұрын
Thanks mate! :)
@JedidiahShultzIrishCraftsman 5 жыл бұрын
It’s my pleasure!👊
@twotwentyswift 2 жыл бұрын
Here I was thinking you were going to use painter's tape to make your lines on the cylinder and you come up with something simple but genius. Well done Pask!
@e.c.jr.3580 5 жыл бұрын
It turned it great. Awesome job!!
@milesabove5259 5 жыл бұрын
Fellow QLD'er 👍 great video mate. Probably the best DIY cost effective forge you can build.
@PaskMakes 5 жыл бұрын
Thanks very much mate! Go the Maroons! :)
@Cactusworkshopchannel 5 жыл бұрын
fantastic!!
@rauljralvarezh.4303 5 жыл бұрын
I’m getting into forging and it amazes me how lost I’ve been without it, I hope to learn much more... “if you make another of this I’d like to buy one!”
@kennethcaine3402 5 жыл бұрын
Great job, the forge looks great and I'm sure it will work fine. Thanks for the video it will help me build my forge.
@wmwalkerco 5 жыл бұрын
man, that looks amazing! I just ordered a forge but now I wish I had made one like you!
@PaskMakes 5 жыл бұрын
Thanks very much - have fun with you're new forge! :)
@EspenLodden 5 жыл бұрын
Great to see someone who does this properly. If you add a thin layer of refractory in the walls and ceiling too it will be more durable and you're safer from cancerous fibers coming loose from the blanket. What temperature did you reach in the end? Thanks for the video!
@PaskMakes 5 жыл бұрын
Thanks Espen! I took it 850c for this test but I believe it should go to 1200c! :)
@TylerDivelbiss 5 жыл бұрын
Yeah the rigidizer isn't intended to be in direct contact with the full flame
@rkb6783 5 жыл бұрын
Double talking two faced Greatful critisizer offering the after fact assistance that will never matter to anyone Happiest sad video ever Said the perfectionist to the narcissist !
@stevenk8189 4 жыл бұрын
Absolutely awesome. Not only the project itself, but the video too.
@simonr6793 4 жыл бұрын
Wow I wish I had the confidence to do this! Looks great.
@driftlessjoinery5059 5 жыл бұрын
Thanks for this! I'll be making 'something' in the next couple months. This got me thinking.......which can be dangerous,
@pco1984 5 жыл бұрын
I like it. It looks like a firey version of Marvin from "the Hitchhiker's guide to the Galaxy".
@glenmcarroll 5 жыл бұрын
Nice build , gave a good idea on how to build my burn stamp heater.
@RGFox-mr5lm 4 жыл бұрын
Exceptional work & videos Pask, brilliant information.
@RiaanOliver 5 жыл бұрын
All it needs now is a tail and some ears. I did have a good laugh during your DJ segment.
@PaskMakes 5 жыл бұрын
I couldn't do it Riaan, this ones a serious one! ;) Glad you liked that - just having a bit of fun! :)
@garagemonkeysan 5 жыл бұрын
Another great video. Does this replace the piggy forge? : ) Loved the "nonsense" part. : )
@PaskMakes 5 жыл бұрын
Thanks mate! Yep Fergus is all but retired. Glad you liked the nonsense, just having a bit of fun! :)
@MichaelAlm 5 жыл бұрын
So cool! I want on!!
@DrewJacobson61 5 жыл бұрын
Pleasure to watch you work!!
@somehyjinx 5 жыл бұрын
A grinder and paint makes me the welder I ain't
@esreverniytilaer3510 5 жыл бұрын
@2:30 Thought I had entered a "This Old Tony" video.
@highlysuspkt8886 4 жыл бұрын
esreverni ytilaer this old tony is great! I love his videos!
@stun9771 5 жыл бұрын
A nice tidy job, well done 👍🏻
@gianlucatrozzi4252 5 жыл бұрын
Many many compliments!!! Special work for me !!! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@ManCrafting 5 жыл бұрын
I had to watch this. That thumbnail was too compelling not to. I have a forge but heck. Maybe I need another. 😁. I really liked the way this one worked out.
@PaskMakes 5 жыл бұрын
Glad you liked it - Thanks! :)
@seventhunders9741 4 жыл бұрын
Like that paint
@macsmith2013 4 жыл бұрын
"GASMATE" What else would be written on an Australian gas bottle?
@WindWolfAlpha 4 жыл бұрын
Marmite! Because we all know how explosive a topic that stuff is!
@81mrmusicman 4 жыл бұрын
True that 😁 Aussie an proud 👍
@ieatcaribou7852 5 жыл бұрын
That was a great forge build. I know what I’ll be rewatching when it comes time to make another forge.
@PaskMakes 5 жыл бұрын
Thanks very much! :)
@grahamkane2993 4 жыл бұрын
So cool. Thank you. Great job. Love the sound effects. G.
@bt465 5 жыл бұрын
I don't know even know why, but I watched it 😂😂😂
@curoimacdaire3630 5 жыл бұрын
I already miss the Scrapwood Challenge song.
@PaskMakes 5 жыл бұрын
There'll be another before the end of the week! :)
@Phil_Cleaver 5 жыл бұрын
There will be the heavy metal version - scrap metal challenge.
@censusgary 5 жыл бұрын
Scrap iron challenge, scrap iron challenge, This metal’s cussed, it’s full of rust, But some of the steel is real.
@Phil_Cleaver 5 жыл бұрын
Queue screaming guitar riff, vocals in a death metal roar.
@martinstrath791 5 жыл бұрын
Gary Cooper Hahah👍😂
@RaghuAkella 3 жыл бұрын
Creative idea and excellent job!!!!
@WRMonger1 5 жыл бұрын
That was brilliant! Taking two or three of those tanks you can create larger forges for larger projects. Just need more burners.
@borisb.5024 5 жыл бұрын
Thank you for showing how you've made your forge. Is there any danger in grinding a pressure vessel after you've "uncorked" it?
@PaskMakes 5 жыл бұрын
No worries Boris! There's no danger with a new bottle! Much easier than messing around flushing out a used bottle! :)
@EspenLodden 5 жыл бұрын
I would fill it once with water and drain it before I cut.
@EspenLodden 5 жыл бұрын
Ah. A new bottle is even safer...
@_NAMiK_ 5 жыл бұрын
it is amlost certain to explode, if you use an old tank and do not wash it out. Flush out old tanks with water. Fill them up 2 or 3 times before cutting them.
@Winterlulz 5 жыл бұрын
Seriously though, when are you installing the pig ears?
@PaskMakes 5 жыл бұрын
Haha - not this time! :)
@MRrwmac 5 жыл бұрын
Awwww, why not since you retired the other one?
@peety6333 5 жыл бұрын
Lol
@eubiov8 5 жыл бұрын
That's some quality build, mate!
@Sharpman76 5 жыл бұрын
Awesome job!
@gordon4385 5 жыл бұрын
Can you buy Liquid Rigidizer without a prescription? Asking for a friend.
@gregr.9547 5 жыл бұрын
🤣🤣🤣🤣
@billy19461 5 жыл бұрын
Loved this video! I would love to have a forge. Do you know where I could get a kit in the USA?
@PaskMakes 5 жыл бұрын
Thanks Billy! I'm not sure where but someone else may answer! :)
@bluewren65 5 жыл бұрын
google it
@JDKempton 2 жыл бұрын
Been real fun watching your older videos seeing how the shop has changed and you not talking.
@kareyriggs1018 4 жыл бұрын
Nobody wants you to get hurt,that's a good thing. Cut em some slack. And just FYI I have seen new empty tanks pop when the paint residue or steel protective anti-oxident is heated and produces smoke which in turn burns. Which reminds me dad was in Japan in 45 and they had llittle gasoline so they would start it on gas then there was a wood stove mounted on the back of the bus with a 6" duct running over the roof down to the carb intake and the motors ran on smoke. The good part when they came to a hill they had to get down and push it up the hill. I just wish I had film of that. Very nice work and great attention to detail !
@thermoblu1 5 жыл бұрын
Hank hill would have a heart attack watching this video
@joehumpston7937 4 жыл бұрын
Actually, He'd probably admire this guy's ingenuity
@curbotize 4 жыл бұрын
Maybe he'll turn a propane tank into a charcoal barbeque? 🤔
@bigosesteban3122 4 жыл бұрын
@@curbotize , no
@curbotize 4 жыл бұрын
@@bigosesteban3122 let's be real here. Even Hank Hill likes charcoal over propane.
@virtualmoyda7221 4 жыл бұрын
God damnit bobby
@kusok8758 5 жыл бұрын
Красивый горн, и выглядит очень удобным.
@VALERMAN33 5 жыл бұрын
Тигель, тигель. Ай лю, лю!
@Aprendiz-de-Marceneiro 5 жыл бұрын
Wonderful job
@kefeer123 5 жыл бұрын
Hope one day to be able to eyeball and freehand with such precision. Nice work!
@trianonalex 5 жыл бұрын
*I can Bake a pizza in that* 🍕
@zonedout1013 4 жыл бұрын
357 dollars for that kit?! Ill pass on that.
@samhouston1288 4 жыл бұрын
You could buy a small gas forge already made for that.
@armin7695 4 жыл бұрын
buy the stuff on your own and it will be around 150 euro
@TheRecreationalMachinist 5 жыл бұрын
A nicely produced video about a nicely built project. Enjoyed watching that.
@dwlsml4118 5 жыл бұрын
Awesome build! Great job!
@JustMe-bu8pu 5 жыл бұрын
If it was just a bit larger...It would make one heck of a Pizza Oven. :)
@PaskMakes 5 жыл бұрын
It does look like a mini pizza oven - cooks quick too! ;)
@doubledarefan 5 жыл бұрын
Looks like an igloo in the thumbnail.
@TheDerekeder 5 жыл бұрын
Absolutely fantastic video making ... Not to mention the craftsmanship!
@PaskMakes 5 жыл бұрын
Thanks Derek! :)
@Steve91694 4 жыл бұрын
Awesome forge, good job!
@projetotrebuchet7862 5 жыл бұрын
There is no such thing as too much nonsense!!!
@PaskMakes 5 жыл бұрын
It has to end at some point else nothing would get done!! ;)
@projetotrebuchet7862 5 жыл бұрын
haha fair enough...
@RobinLewisMakes 5 жыл бұрын
I was just about to say the same thing!
@projetotrebuchet7862 5 жыл бұрын
I think Neil should come up with a whole album... #1 - Scrapwood Challenge Intro, #2 - Nonsense Dub... and so on.
@RobinLewisMakes 5 жыл бұрын
YES!!!
@colonelgraff9198 5 жыл бұрын
Hank Hill would be disappointed. How dare you disrespect propane accessories.
@user-qj7kk8rs4s 5 жыл бұрын
Mas
@graphguy 5 жыл бұрын
Human ingenuity, where there is a will, there is a way. Bravo.
@killajr51 5 жыл бұрын
Man I’ve been interested in learning to work with metal! Welding, soldering, casting copper all that good stuff!
Marusya Outdoors
Рет қаралды 442 МЛН
Mihail Kupec
Рет қаралды 1,7 МЛН
Knives Project
Рет қаралды 27 МЛН