Proper Way To Tip A Lawn Mower Over

Рет қаралды 4,107,340

Күн бұрын

There seems to be some controversy about which way to tilt a lawn mower over! In this video, I’ll show you how to tip a lawn mower and then prove it. This is the only sure way to safely flip or tilt a lawnmower over without draining all the fluids. If you use this method or technique, you will not hydro-lock the engine or have fuel or oil drip from the engine. Turn it over the right way!
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a common air filter ➜ amzn.to/3iLNFwr
✅Click here for a proper blade balancer ➜ amzn.to/2BmvxUO
For more videos like this, check out:
👉Straighten A Bent Lawn Mower Crankshaft With A Pipe ➜ • Straighten A Bent Lawn...
👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ • Fastest Way To Tell If...
👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ • Here's Why Your Lawn M...
👉How To Adjust the RPM Speed on a Lawn Mower ➜ • How To Adjust the RPM ...
🔧WELCOME to the Steve’s Small Engine Saloon KZfaq channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
✅Follow Steve on TIKTOK ➜ / stevessmallenginesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #troubleshooting #engine #lawnandgarden #lawnmower #lawnmowerrepair #mowerrepair #honda #craftsman #toro #husqvarna #troybilt

Пікірлер: 9 000

@StevesSmallEngineSaloon 3 жыл бұрын

✅Click here for a common air filter ➜ amzn.to/3iLNFwr ✅Click here for a proper blade balancer ➜ amzn.to/2BmvxUO For more videos like this, check out: 👉Straighten A Bent Lawn Mower Crankshaft With A Pipe ➜ kzfaq.info/get/bejne/rZiCopx40qvdf3k.html 👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ kzfaq.info/get/bejne/adugaJp1rc-noac.html 👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ kzfaq.info/get/bejne/qtZmaqSrvLTGeWg.html 👉How To Adjust the RPM Speed on a Lawn Mower ➜ kzfaq.info/get/bejne/bb-idJaCqq-qnnk.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

@tobiwankanobi9613 3 жыл бұрын

Steve i was cleaning my lawnmower and didn’t know this trick so when I put it on ground again and pulled the rope it smoked my hole garden and there was a lot of smoke I tell ya🤣

@arturodelagarza3213 3 жыл бұрын

HEY STEVE. THANKS FOR THE INFO. VERY INFORMATIVE.

@jrtrejo495 3 жыл бұрын

Hey Steve, I have one for you. I have a Stihl SH-85 Blower. This thing has been indestructible, had it for many years, have taken good care of it. Replaced the plug, the little lever that goes to choke to run, the push priming bulb, I’ve taken it in a couple times to see if I’ve missed anything. It starts great and runs great for a whole tank full of fuel. But when it runs out and I fill the tank again to keep going, I prime it a couple times to get the fuel back into the line and I have a hell of a time starting it back up again. I have to wait practically until the next day to use it again. Any suggestions. Thanks So Much.

@blairfright9622 3 жыл бұрын

Hi Steve, this is not related to the mower . I have a question concerning my ms 170 chain saw. It keeps leaking oil from the bottom of the engine case. And I have no oil coming out on chain when running. Any ideas?

@juancontre5858 3 жыл бұрын

Nice work good info n u prove it too

@xyzxyz-hi8lp 29 күн бұрын

KZfaq is like the dad I never had growing up.

@user-dj7jw4fw4x 14 күн бұрын

A little sad, but maybe the best KZfaq comment ever.

@chrisdorio6750 5 күн бұрын

Sad, no dad. There are many young people today who don't even want to learn how to do simple things....

@floridaman5125 5 күн бұрын

Great comment.

@deawallace3584 8 ай бұрын

I am not a mechanic..just an elderly lady with common sense. Since my spouse has dementia and has done NO maintenance for years on anything...the job is mine. Thank you for giving such basic, but vital information. It is life-saving for some of us.

@StevesSmallEngineSaloon 8 ай бұрын

Who needs a mechanic when you've got common sense, right? You're doing an amazing job taking charge of the maintenance. Keep it up, superwoman!

@carlcasey4177 Ай бұрын

Your a good partner 👍🫡💪

@barbaraellis6637 Ай бұрын

I feel for you 🙏

@deawallace3584 Ай бұрын

@@barbaraellis6637 Thank you . Your words are uplifting. Appreciate it.

@robnic52 29 күн бұрын

If hydrolocked surely you can just remove the spark plug and pull the starter cord a few times. Waste of oil and messy but it'll clear the cylinder won't it? Or am I missing something?

@elizabethappleton3667 17 күн бұрын

Further to my husband tipping the mower over on the air filter side today and oil pouring out, I’ve been investigating utube. This is a wonderful video for me. Thanks. Now if he’ll just believe me.🤷‍♀️

@SeedFiddler-kp4eg 3 ай бұрын

I'm almost 70 years old. I passed auto mechanics because the instructor told us (me) at the end of the quarter, "If you turn in a piece of paper with your name on it, I will pass you." So I did. And he kept his promise. Now that you know who you're dealing with, then you will know how thankful I am, that in the last five minutes, I've learned more about mechanics that I have in the first 69 years of my life. Thank you! Trust me, this is barely exaggerating at all, just so that you know. Thank you!

@wince_moeron 3 жыл бұрын

Mine usually gets tipped over when I pick it up and throw it across the yard cuz it won't start

@todhurley3756 3 жыл бұрын

After a 6pk of beer and 30mins pulling the rope and cussing. I throw it in the Creek behind the house. Thanks Steve Steve great video.

@billcoley8520 3 жыл бұрын

Buy a deere

@MKD-dd6ng 3 жыл бұрын

😂😂😂😂

@pollyhorlander7389 3 жыл бұрын

wince moeron 😂

@bobbelsekwol 3 жыл бұрын

Does that make it start though? Asking for a friend.

@julieharper1704 Жыл бұрын

I wanted to thank you for your videos. I'm 60 and didn't really know anything about my lawn mower other than putting gas in it. I now keep up with my air filter, oil and blade changes as well. I had a carburetor issue and thanks to you I took it off, cleaned it and put it back on. My son was impressed. He said he doesn't know anything about mowers. I was not going to give up, so I am very happy and like I always say, "you're never too old to learn". Thanks again for sharing your knowledge.

@StevesSmallEngineSaloon Жыл бұрын

Great job!

@DatOneRadDad Жыл бұрын

Now that's rad!

@Shukovsky Жыл бұрын

Nice job julie!!!!

@351clevelandmodifiedmotor4 Жыл бұрын

dont mow the lawn at your age youll have a heart attack, number 1 cause of heart attacks is mowing the lawn or washing the car, pay a honest good hearted kid you can trust to mow your lawn, i don't know why people think its time to mow the lawn when it's hot and sunny, thats the worst time to mow the lawn, washing the car is easy, don't do it when its hot and sunny, give it a quick wetting with the hose and have a spray bottle with soapy water spray a panel of the car then brush the area with a soft bristled broom then hose off the dirty soapy water do this to each panel until all the panels are done

@michaelblodgett4704 Жыл бұрын

@@351clevelandmodifiedmotor4 🤣 OMG. You think 60 is on brink of heart attack and death. I'm 62, and I bet I can out exercise you.

@darkegress4392 Ай бұрын

At first I was annoyed thinking you needed to get to the point but your knowledge is GOLD! Thank you.

@StevesSmallEngineSaloon Ай бұрын

You're welcome!

@dogsbyfire Ай бұрын

Been working on small engines for forty years, but I learned something from this video. You are the man! Love your shop, especially the beer can collection.

@StevesSmallEngineSaloon Ай бұрын

Cool, thanks

@Irwhodunit 3 жыл бұрын

I was wondering about how you would use up 8 minutes to tell me how to turn the mower over. Thanks! I'm glad I watched the whole deal. Interesting stuff!

@StevesSmallEngineSaloon 3 жыл бұрын

Glad I could help!

@zybenson3367 2 жыл бұрын

I was thinking the same but then I couldn’t stop watching. Great video

@captainobvious9209 2 жыл бұрын

1. What the hell? 2. What’s this? 3. Hmmmm 4. Suddenly can’t stop watching... 5 what has happened to me? 6 addicted

@PMA65537 2 жыл бұрын

I quit at 40 seconds after it's clear he means a petrol mower and not electric.

@BTENERY 2 жыл бұрын

@@PMA65537 that’s funny 😆

@derek876544 3 жыл бұрын

Been doing it for 20 years never thought of tipping mower over with piston at tdc ! cheers Steve never too old to learn

@terryc47 3 жыл бұрын

@@mgomez5606 how is gas going to leak out carburetor when it is at the top?

@corydriver7634 3 жыл бұрын

M Gomez it didn’t seem to leak from these 2 examples after 75 hours so...

@corydriver7634 3 жыл бұрын

M Gomez I guess Steve didn’t show us that step. He must have shut it off or clamped it because these two didn’t leak.

@derek876544 3 жыл бұрын

@@mgomez5606fuel doesn't usually leak (or only what's in carb)because fuel in tank is lower than carb when tipped over with carb uppermost

@jerrysoutherland662 3 жыл бұрын

Before I tip the mower over,I clamp the fuel line and start the engine and run it until the mower dies.Now I will put it on TDC.

@biking2cruze Жыл бұрын

I get my mowers for free from the neighbors giving up on the equipment when it fails to start or dies while running. Seeing your video taught me more lessons on the maintenance and operation of power tools. We live in a throwaway society so much that we fail to appreciate what our equipment does for us IF we just take the time to change the oil, sharpen OR replace blades, change the spark plugs, clean or replace the air cleaner (some have paper elements, god I hate those cause they need to be replaced if worn out) and just keep the deck clean (be careful washing around the fuel cap air cleaner area as you don’t want water to enter and contaminate the fuel or block air cleaner. I was skittish bout putting mower on its side and went out of my way to point it spark plug-skyward. Now armed with your info, I’ll follow what you demonstrated to effectively get under and repair my equipment with (hopefully) less mess!😊

@hanselito2416 2 ай бұрын

Admit it, you love that people throw stuff away. Sounds like youre doing your part 🎉

@logmeindangit 2 ай бұрын

Speaking of the modern "throw it away"society we live in, I just picked up a nearly new mower being given away because it would start but not stay running. I took the cheap plastic carburetor apart, using KZfaq videos as guides, and got it working. I don't know where the fuel was blocked in it, but I blew air through places I couldn't see, and whatever I did evidently dislodged the itty bitty beaver dam in the channels somewhere. I would have paid $350 for this mower new. The last one I bought new in the early 1990s wa+s starting to leak oil underneath at the shaft seal, so this was perfect timing. I'm now set for another 2 or 3 decades!

@spg5658 6 күн бұрын

I change my blade only when my mower is out of fuel and i have emptied the oil in preparation for an oil change. But, this was very helpful for sure 👍

@dwilliams5989 2 жыл бұрын

Many years of grass cutting and needing to tip my lawn mower over occasionally, only to flood my mower with oil and gas and be frustrated. This was a great video i really needed. Great video Steve! Well done Sir.

@StevesSmallEngineSaloon 2 жыл бұрын

Thank You...

@aedinquinn8687 2 жыл бұрын

Intelligent comment; recently I incorrectly tipped my new lawnmower purchased in 2021 to discover I had to pull string multiple times to start lawnmower. Aedin

@kev_6422 2 жыл бұрын

What would you do once you flooded it? Did this yesterday and started spitting oil and smoke like crazy. Still got the yard to do

@tomjones2121 2 жыл бұрын

trying to reinvent flipping a lawn mower LOL, drain your oil , problem solved , then do whatever you want .....

@johmac30 2 жыл бұрын

@@tomjones2121 You are joking, right? Let me make a note. From now on, every time I finish cutting the grass I should drain the oil before flipping it on its side to clean the clippings under the deck. Then put the oil back in. That seems much easier than pulling the rope until I feel the most resistance and then flipping it up so the muffler is facing down. Did you even watch the video?

@keza41 3 жыл бұрын

Ok, I’ve seen a few of your vids now, I’m going to subscribe because you provide no bullshit intro, no shit music, excellent content, with sound advice backed up with years of experience. Thank you sir, I learn something every time I watch.

@StevesSmallEngineSaloon 3 жыл бұрын

WOW! Thank You...

@ericgillin4319 3 жыл бұрын

maybe that's why this guys videos are not irritating, no shit music, some videos i can not even watch because of the music

@FourSeasonsNorth4x4 2 жыл бұрын

Just the facts sir, just the facts.(and no shit music)😉

@hopehenderson7510 2 жыл бұрын

Same here, its refreshing to have strait to the point information. I'm subscribing for that reason. His advice checks out from what I've researched so far.

@gman8648 2 жыл бұрын

Absolutely!!

@danghe6585 Күн бұрын

You really know how to explain and prove what you say.

@StevesSmallEngineSaloon Күн бұрын

Thank You...

@user-wl1eh9gm7o 9 ай бұрын

Clearly explained and easy to understand. Excellent.

@StevesSmallEngineSaloon 9 ай бұрын

Thank You...

@Gurl_warrioR 2 жыл бұрын

I’m a 65 year old woman that doesn’t have anyone to do things like mow the yard and this kind of knowledge is what I need to be self sufficient! Thank you so much! Looking forward to more knowledge from you and yes, I have clicked subscribed! 😁👍👏🏻✌🏻

@JesusSaves827 2 жыл бұрын

KZfaq and the internet has made husbands no longer needed! 🤣

@Find_Amelia_Island 2 жыл бұрын

@@JesusSaves827 but a good one is wonderful to have !!

@daddi-o2443 2 жыл бұрын

@@JesusSaves827 Hey now! We must be good for something?!? ;)

@alaysiakayebutler6299 2 жыл бұрын

I'm with you, sister!! 60 yr old Grammy here, have rural property, and it's all on me

@robertcorbin233 2 жыл бұрын

My mother could fix anything from a microwave to an A/c. All it takes is knowledge. That how most of us men learned how to do it. By learning.

@littlecrow6484 3 жыл бұрын

It's so good to know that there's somebody out there who actually knows a thing or two about a thing or two.

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@andrew_koala2974 3 жыл бұрын

Someone NOT SomeBODY. He is not DEAD yet Your knowledge of the English language is poor.

@paulmaxwell8851 2 ай бұрын

Please, get off your high horse. No-one needs a lecture from you, a stranger on the internet. @@andrew_koala2974

@shadowdog500 Ай бұрын

I was ready to tip over my lawnmower today and remembered this video. I’m glad I re-watched it before tipping the mower because I forgot about the “pull it to TDC” part. When I was done, It started on the first pull with no smoke.

@StevesSmallEngineSaloon Ай бұрын

Great job!

@timdoll6718 6 күн бұрын

Great informative and helpful video . I have an older Honda self propelled lawn mower that I bought used from a local lawn equipment sales and repair company. The instructions clearly show what you just so throughly explained. The instructions doesn’t mention the top dead center tip though. My mower has started on the first pull from the day I bought it 5 years ago. I run only ethanol free gas and turn the fuel valve off and empty the carb after each use. Thank You for the well posted video showing the correct way to lay the mower on its side.

@StevesSmallEngineSaloon 6 күн бұрын

You're Welcome...

@Slangevar333 Жыл бұрын

As a Kid, my father showed me many things, but when it came to mechanical things specifically combustion engines, he had little to teach. He just took his power equipment to a repair shop and let them do their work. I got to the point 25 years ago, where I got too frustrated to haul my gear to a mechanic and then wait endlessly for them to complete their tasks and present me with a bill that came close to motivating me just to buy a new unit. I have watched many how videos in the 17 years that youtube has been around (and before that saw tutorials on VHS) Your videos are so well done! Your personable way of speaking and expressing all the nuances of how various small engine problems are solved on so many different types of machines and make, well they really turn the lightbulbs on for me and make me eager to tackle the repairs and maintenance that go with the advantages and benefits they provide. Your body of work here is superior and so broad, it truly makes you one of my heroes. Today I salute you for sharing, producing, planning, performing and broadcasting by taking full advantage of youtube and the internet! You have inspired me to join your channel as a member and support your great work here.

@StevesSmallEngineSaloon Жыл бұрын

WOW! Thank you so much Randall...

@timothydolan5587 Жыл бұрын

Hi Randall, I am 65 and I totally concur with your post. Keep on keeping on!

@madelynl.5351 Жыл бұрын

I’m a 73 yo widow. Thanks for the info about the best way to overturn my B&S Craftsman lawn mower. I’m going to try it. I’m doing this one task at a time and by God, one day that engine is going to turn over! And btw thanks, comment ladies for unwittingly encouraging me to continue to attempt to do my own repairs. Off topic, my favorite bit of advice when it came to a new man in my life is to ask myself, “does he want a nurse or a purse?” I don’t need neither, thankyouverymuch! Just like my machines, I want a reliable self sufficient self starter with low maintenance and who is easy to figure out! (Btw, this is NOT a personal ad!)

@leyfolkner3977 Жыл бұрын

We think alike! 71 yo here. So glad I found this dude, tho.

@kentstansberry9748 7 сағат бұрын

I loosen the handle and pivot the mower up and back until the deck is perpendicular to the floor, that gives me access to everything including the wheels. Been doing it this way since I purchased the mower nearly twenty years ago and have had no issues. Mower starts right up when I'm finished with no, or hardly any smoke. It's a White Horse, 22" self-propelled walk-behind Model 12AV839R090 W839R with a Briggs & Stratton Quantum 650 Series engine.

@Lee-mmg Ай бұрын

You are a hero to this old 75 yr old great grandma - I know so much more and you told it in such clear terms. Thank you, thank you!

@StevesSmallEngineSaloon Ай бұрын

You are so welcome

@jeffbarnowske5598 Жыл бұрын

Canadians are so helpful and good natured! Thanks from a neighbor to the south!

@StevesSmallEngineSaloon Жыл бұрын

Our pleasure!

@madeincanada5251 2 ай бұрын

Made my day! Thank you sir!

@pamelalyon1030 Жыл бұрын

I'm happy you came on I'm a 60 year old widow and my husband had cancer 5years now but he always did all the man stuff fixed everything he was good at it. But if he would have known utube has gotten me by from watching how to fix it my self He would have been proud and drank a cold one with you just for being one of the reasons I count on utube to show me how to fix it so Thank You Steve.have one for us☺

@garysherman953 Жыл бұрын

Dang! I have been working on cars for 56 yrs. and I have been doing this wrong because I did not think it through. Thanks for the slap on the back of my head. I really appreciate it.

@mackrod9028 2 жыл бұрын

FINALLY SOMEONE WHO GIVES YOU A STRAIGHT TO THE POINT VIDEO 👍

@StevesSmallEngineSaloon 2 жыл бұрын

Right on Buddy! Thank You...

@MarlinMark444 3 жыл бұрын

Men, women, children, we must protect Steve at all costs.

@jenniferhermanson8969 2 жыл бұрын

Sir yes Sir Rank up people

@familydogg1234 21 күн бұрын

I just " Pop a wheely" handle to the ground with a weight on it. Hose it down, scrub. I change blade also. I've seen people completely flip it upside down!!! Lol- gas leaking and oil going to the air filter. ( sigh). Of course they don't cut many lawns then they wonder why their mower needs to be replaced. Yes- disconnect spark plug wire. I heard someone got 2 fingers cut turning the blade by hand therefore " pop starting " it. But what about the Throttle handle? It's not squeezed in the " on" position. Someone said it's an urban legend there are now Safety Devices in them- according to " Joe Mechanic" Thumbs Up to Steve!! SUBSCRIBE!!

@chris72972 9 ай бұрын

Love your videos. Super helpful. I work on small engines a lot, and I knew not to tip it over with the carb down, but I never thought about moving the piston to TDC to make sure the valves are closed. Makes total sense, but it's nice that you you explain it, and show an easy way to do it. Thanks for all your hard work. Much appreciated. Keep it up!

@StevesSmallEngineSaloon 9 ай бұрын

Glad to help

@klwthe3rd 3 жыл бұрын

I love how Steve really goes into detail on his explainations in his videos. I'm the kinda guy who likes detailed instructions and guidance. Probably why I love this channel!

@StevesSmallEngineSaloon 3 жыл бұрын

Right on Kenny! Thank You...

@jonthompson2066 3 жыл бұрын

Finally someone has set the record straight, with video to prove it! Great job Steve!

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@TheMycroft1 17 күн бұрын

I watched this video a few years ago and again just now. Thanks for the useful demonstration, wish I could 'Like' it a second time.

@StevesSmallEngineSaloon 16 күн бұрын

You're very welcome!

@jzm6403 Ай бұрын

I've changed my blades 3 times on my Honda 22" and always have layed it on its right side like he does early in the video. It shows this in my Honda manual. Never had a problem.

@blairfright9622 3 жыл бұрын

Hi Steve, I've always tipped my mower with the carb up. But I didn't even think about top dead center, great tip! My hat off to the master!

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@NickD_7 3 жыл бұрын

As home owner in Michigan, I have watched 100s of do it you selfer videos around the house and garage. This channel is the best on being informed on a particular matter. Definitely a KZfaq Oscar channel.

@StevesSmallEngineSaloon 3 жыл бұрын

Wow, thank you!

@iloveit9468 2 жыл бұрын

Say yes to Michigan! 👋

@mplslawnguy3389 18 күн бұрын

I know this is 3 yrs old, but very helpful, I never knew you could hydrolock an engine like that. I’ve never done this process before and it hasn’t happened to my Honda, but I will do this from now on just to be on the safe side.

@StevesSmallEngineSaloon 18 күн бұрын

Right on

@user-vx2ms6vw1f 23 күн бұрын

Thank you for your advice to fix my weed wacker due to the cutting strips that kept falling out when in use. I purchased a new Echo rapid loader and even with all the different attachments, it would not fit on my older Echo weed wacker. I was cheesed off a bit but I remembered viewing your video taking the loader apart, cleaning and lubing the metal parts that hold the cutting string and now it works fine again. Thank you again Charles

@charlesoliver5834 3 жыл бұрын

Your performance (a caliber step up from presentation) style is engaging, well organized, non- condescending, inspiring, cognitively brilliant, and entertaining. You obviously are very intelligent, but your charming delivery makes your videos stand out from others that may have correct facts, but are tedious to watch. You show us how to figure things out. Your script is free and conversational without the all too often pitfalls of the unprepared. "Ah, um, I think...." Video production is well framed, well lighted, and well segmented with close-ups. No drifting (motion sick generating) changes in focus or zoom. Yeah! And my biggest pet peeve. "There's always a sound issue!" You always have perfect sound even when loud sounds happen, you dampen them so we don't get our ears blasted. And you don't mumble, deminuendo at the end of a word or phrase! Natural story teller and performer. FULL MARKS! - Professor of Education, Dr. Charles O.

@StevesSmallEngineSaloon 3 жыл бұрын

WOW! Thank you so much....

@Electraglide1350 3 жыл бұрын

68 years old ... seeing something like this for the first time..... Thank you so much Steve ... didn't save me money but it did save me from a lot of frustration .... people should share knowledge just as you have ....

@StevesSmallEngineSaloon 3 жыл бұрын

Glad to help

@andrew_koala2974 3 жыл бұрын

68 years of age - NOT 68 years old. People and animals live through the 'ages' it is THINGS that become OLD == Your Lawnmower - car - clothes - appliances etc. Did you not live through the teen-age years? The clues are in front of your eyes yet you are blind. For your homework make a list of all the ages ManKind has lived through.

@bruceboettcher9977 Жыл бұрын

Thank you, Steve, thank you. For 50 years I hated turning my mower over because I didn't know how and was not smart (or humble) enough to get educated. I love your clear no-nonsense approach. Did I say thanks?

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@GG-eg6kn Жыл бұрын

Finally a video that gets straight to the point!!! Then goes into detail!

@StevesSmallEngineSaloon Жыл бұрын

Thank You...

@randyclark831 2 жыл бұрын

I always turned the mower with the carburetor up when I changed the blade because it seemed logical that the oil would pool and make it difficult to start. Great to hear your explanation of the valve and piston position and how to “feel” that position. Good info!

@StevesSmallEngineSaloon 2 жыл бұрын

Thank You...

@masterbondofox8982 2 жыл бұрын

@@StevesSmallEngineSaloon I learned the hard way years ago. My mower was sputtering and fighting to start and to keep running ... after a day or two I put my troubleshooting mind to work and took out the air filter. Completely clogged with oil.

@keneest3918 2 жыл бұрын

Great info,well presented.

@bobbiewhitten1718 Жыл бұрын

A lot of people in this country don't work on logic. Just read some of the questions they ask.

@superdave336 19 күн бұрын

Really great video with easy to understand explanation on everything. Now we know the correct way to tip a mower. Thanks for sharing.

@StevesSmallEngineSaloon 19 күн бұрын

Glad it was helpful!

@pauls5096 18 күн бұрын

Always knew to have the air filter up but never knew the TDC trick.

@StevesSmallEngineSaloon 17 күн бұрын

Right on

@tonym6920 3 жыл бұрын

Good idea. I’ve always just tipped my mowers carb side up, not paying much attention to the TDC issue, and never, ever had an issue with oil leaks or hydro-locking the engine after cleaning the underside of the deck. Like you demonstrated, the mowers always start first or second pull, no smoke. (Toro Recycler and 2 Honda mowers) I can understand what you’re saying and it makes perfect sense Steve, so, I’ll it a try next time. I don’t see mention of placing the engine at TDC center in the owner’s manuals, maybe they should! LOL. Stay safe buddy! 👍👍

@ccadama 3 жыл бұрын

@Tman NC. What's a owner's manual??? Just kidding. I'm one of those few that actually takes the time to read and go back over my user's manuals when I need to look up info. Just think of the tech writer whose job it is to get all the info and write a manual. That person needs some love too. Hope you and your family stay safe and well.

@Leonardokite 3 жыл бұрын

@@ccadama And then there are the "Engrish" manuals. "Please set that thing cylindrical at the top of the expired central"

@daurbn 3 жыл бұрын

Never had an issue with tilting mower with carburetor up. But never left it on its side for more than a few minutes. Seen neighbors doing some crazy things and then they are wondering why oil is low and it won't start,had to intervene before catastrophe happened, then informed them of what you taught me and told them to follow your KZfaq channel for more small engine tips and repair videos 😉 Thank you Steve!

@timbohouston 3 жыл бұрын

I had a guy buy a mower from me. He tested it everything worked great, then he tipped it and it wouldnt start. Lol

@ehsnils 3 жыл бұрын

If you get problems with hydrolocking due to oil in just a few minutes then it's likely that the engine is in bad shape anyway. Only rule of thumb I can consider is to have less than half tank of gas, At least on those where there's no float bowl but the carburetor takes fuel directly from the tank. Not sure if they make them anymore, they existed in the 70's/80's.

@vavoom8380 3 жыл бұрын

I was given a '92 Craftsman mower that spent years exposed to the elements..cord would not pull, filter crumbling away, rain water in gas tank and oil like tar..thanks to Steve got that baby working and now for that edger!

@StevesSmallEngineSaloon 3 жыл бұрын

Right on

@JesseFinken Жыл бұрын

you never touched your beer and I have no idea how many beers to have ready for tipping my own mower over! lol just messing with you. great video as always!

@monotheis6889 Жыл бұрын

I figured this out on my own as a kid. I had taken small engines in 4-H, and understood the workings of interval combustion engines and then some. I have been blowing them up and rebuilding then ever since 😁

@secretsquirrel5566 3 жыл бұрын

My goodness. I accidentally came across this channel trying to get my generator to start. Since then, I've made it through 4 of your playlists. You Sir are a gift to all of us. Your procedures and step-by-step instructions along with your tips of how to make things easier are just fantastic. Most people want to charge us mortals to fix these things, but you empower us to do it ourselves. I am a Senior Software Engineer and always considered that I just wasn't "mechanically inclined". It turns out that I was just fine. What I was missing was an instructor that spoke my language. Thank you Steve, you've really changed my knowledge and way of thinking.

@StevesSmallEngineSaloon 3 жыл бұрын

Awesome comment! Thank You...

@tomwilliams8675 3 жыл бұрын

Never knew about that. Just always put up with a little dripping and got the job done. That's why the grass has little brown spots next to the garage 😁 Thanks 👍👍👍

@StevesSmallEngineSaloon 3 жыл бұрын

You're Welcome...

@johnchuba912 Жыл бұрын

I always tip mine the wrong way. Helps keep my local small engine repair guy busy.

@robd4526 Жыл бұрын

Hands down BEST explanation video for ..... which side to flip the mower AND what to do BEFORE

@StevesSmallEngineSaloon Жыл бұрын

Thank You...

@Leonardokite 3 жыл бұрын

Hmmm, I never did the TDC thing before. One extra precautionary measure!

@johnschafstall1323 3 жыл бұрын

Teaching me about the top dead center was really great. Thank you!

@StevesSmallEngineSaloon 3 жыл бұрын

You're Welcome...

@williamkniesly5090 17 күн бұрын

Great video . I found out if i keep quiet long enough and pay attention I learn something. Thank you.

@martinwhite550 Жыл бұрын

Great video, very informative for those who are interested in completing their own maintenance and DIY 👍

@StevesSmallEngineSaloon Жыл бұрын

Thank You...

@MH-wg6bz 3 жыл бұрын

I've just always expected to drip some fuel or oil. Never thought much about moving the piston TDC and carb up. Great idea. Will use that next time.

@StevesSmallEngineSaloon 3 жыл бұрын

Right on

@nonyabiz2777 2 жыл бұрын

Nice work. The same advice my grand dad told me 45 years ago. You sir are a national treasure. Bravo to the camera person and editor. Nice quality work.

@StevesSmallEngineSaloon 2 жыл бұрын

Wow, thanks

@MMM40727 27 күн бұрын

Thank you! I just replaced the blade on my 12 yr old mower and not a drop of oil or gas spilled out! I’m a 63 yr old woman and this video helped me do it myself!! The grass looks fantastic with that new blade!

@StevesSmallEngineSaloon 27 күн бұрын

Great job!

@jameshoffnagle280 11 ай бұрын

You’re my favorite lawnmower man👍. Save me tons of money 💰, and I feel a little smarter after watching your channel. Thank you

@StevesSmallEngineSaloon 11 ай бұрын

Glad to help

@matthewmansell1413 Ай бұрын

I didn't expect such a complete and informative video from something i randomly clicked on. Thank you so much for quality content and no extra fluff. You earned a subscriber.

@StevesSmallEngineSaloon Ай бұрын

Right on buddy! Thank You...

@dittilio 2 жыл бұрын

I absolutely love that your "buffer" time is actually useful explanation of what's going on. Most channels spend 5 minutes saying nothing before finally "revealing" what should have taken 10 seconds. Love this channel.

@StevesSmallEngineSaloon 2 жыл бұрын

I appreciate that!

@g.p.880 Жыл бұрын

20 years ago I was small engine tech at sears service and we always laid our mowers over to the oil filler side. Even the big 3 engine suppliers would tell us do it that way, but never mention tdc, wish I would of known that back then, great advice. Thanks.

@StevesSmallEngineSaloon Жыл бұрын

Right on

@siberia1409 7 күн бұрын

I am 60 years old and now I am devastated that I did not already know this!😳

@jacobbehunin 13 күн бұрын

Thanks! I had heard of the HydroLock issue, and people always glossed over how to put the Piston in TDC. I appreciate you showing how to do that!

@StevesSmallEngineSaloon 13 күн бұрын

Glad to help

@ronstar8857 3 жыл бұрын

Look at what I learned today. You CAN teach this old dog new tricks! Thank you so much for a VERY informative video! Very informative!

@StevesSmallEngineSaloon 3 жыл бұрын

Our pleasure!

@andrew_koala2974 3 жыл бұрын

You are a 'Star' Ron. Some people are teachable and some are not. Only those with an open and curious mind are teachable. As a former Air-force pilot and Electronics Engineer I will leave you with this adage: A mind is like a parachute. It only works when it is open.

@haraldlonn898 Жыл бұрын

Explains everything. Never had any problems before but now I know Im doing it right, including the beer after and not before.

@David-vn7th Жыл бұрын

Thanks Steve great video. For years I have avoided flipping my lawn mower for fear of F***ing it up. Now I know how to do it correctly!

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@RatdogDRB 10 ай бұрын

I bought a brand new lawn edger with a Tecumseh engine that was being clearanced out for next to nothing "won't start". I pulled the air filter cover and engine oil came pouring out. I bought it, a new air filter, a new jug of oil, and a new spark plug. Took it home and drained the oil, sprayed a bunch of carb cleaner into the throat of the carb after pulling the old air filter and swabbing it clean, pulled the spark plug and pulled the cord a bunch of time while shooting more carb cleaner into it. I put the drain plug in it, filled with oil clean oil to full, slapped the new spark plug in it, as well as the new air filter, put fresh gas in it, primed the bulb and pulled to cord... she barked to life on the first pull. That was the mid 90s, I still have that edger today.

@beeswan9775 Жыл бұрын

Thank you. I am a senior citizen living alone. I must do my yard and weekly mower maintenance myself. This was very helpful!

@StevesSmallEngineSaloon Жыл бұрын

Glad it was helpful!

@sikwilly45 2 жыл бұрын

I always used to just go for it and tip my mower on the muffler side down. I didn't know about pulling the rope to align the piston and close the valves. Thanks Steve!

@StevesSmallEngineSaloon 2 жыл бұрын

Glad to help

@robhunter2435 Жыл бұрын

Thanks Steve this helps a lot. In the past I just raised the lawnmower with the wheels on ramps high enough to do my work. That way I do not have to worry about oil and gas draining from the mower.

@beverleygregory 19 күн бұрын

thanks Steve your the best info mower man out there, I spent a whole day on a honda 50 mower took of the carb twice and cleaned it still wouldnt start and run right, it would normaly start and run great but last fall just started and quit so I just got at it again, as taking it to the local shop costs $140 .00 every time it doesnt run right, so I have to try to overcome the problem myself so Im glad to view your site, I learned I missed the main central jet that you removed with a screwdriver ,so Im getting back at it today, Ill keep you posted thanks again

@edwardstavola3639 3 жыл бұрын

I haven't been doing repairs but a couple of years but after watching your video it has taught me a lot. Well worth the time to view it. Thanks Steve!

@StevesSmallEngineSaloon 3 жыл бұрын

Great to hear!

@TheCount46 3 жыл бұрын

Well, you certainly have solved another problem for me. No wonder I was having oil spill out and it took 10 or more pulls to start it. A big thumbs up for you, Steve!

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@robertshorthill4153 3 жыл бұрын

George 420 Here's a story for you: Last late August, my son - in- law has a pressure washer that he had that would not start. He was ready to return it. Asked me could I figure out why. I checked the oil and put in fresh gas of the non- ethanol type, since he just buys any gas he can find at the station. Turns out he put in about 3 times as much oil as it needed. I sucked as much oil as I could with a large syringe and filled it back up with proper amount. It fired right up and smoked for about ten minutes before burning off all the oil in the engine. I've still got the machine to use this spring if I need it for stuff and he can have it back in running order. Thanks to Steve it is running well. Watch out for over full engine oil tank Cheers Bov

@user-fx3rg9km4f 11 ай бұрын

Teaching my grandsons how to maintain the mowers they use in their neighborhood lawn mowing biz. Thanks !!

@StevesSmallEngineSaloon 11 ай бұрын

That is awesome!

@gregturk2824 Жыл бұрын

Excellent, no fluff, just what’s necessary.

@StevesSmallEngineSaloon Жыл бұрын

Thank You...

@rockevronv11 3 жыл бұрын

Amazing! I’ve been repairing engines for about 3 years and I couldn’t find out why this keeps happening it’s such a pain in the ass and a mess

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@TheCount46 Жыл бұрын

Thank you, Steve! I don't know how many times I had to clean up the oil spill from tipping my lawn mower on the wrong side. The piston at top dead center solves all this! Thanks again for another excellent teaching lesson.

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@scubatraveler100 Жыл бұрын

You're saving me money with every episode. Thank you

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@frankrobinson5453 15 күн бұрын

I was just about to perform an oil change on my push mower and was gonna tip it on it's side to drain the oil. I didn't realize the benefit of finding top dead center as you described. Many thanks for the great advice. I never thought of checking for tdc like this. Thank you.

@StevesSmallEngineSaloon 14 күн бұрын

You're Welcome...

@frankrobinson5453 14 күн бұрын

@@StevesSmallEngineSaloon Did the oil change today. Found tdc and tipped her over. Cranked on first pull, smoked for 2 seconds and everything is great. Also changed the plug. Feels like I accomplished something today.

@abe677 3 жыл бұрын

My 85-year-old mother still mows her yard. Bags the grass too. She likes to life the mower to clean the under side, especially when the grass is a little damp. I'm sending her this video because she has made the mower un-startable more than once. You described this better than I could have.

@StevesSmallEngineSaloon 3 жыл бұрын

Right on Marky...

@chrisdewoody1529 3 жыл бұрын

Your gonna make grandma take the plug out ?

@abe677 3 жыл бұрын

Hopefully stop her from screwing up the mower and having to call someone.

@bikerx1981 3 жыл бұрын

Steve has never failed to give proper advice and showing us how to properly do maintenance on our machines,

@StevesSmallEngineSaloon 3 жыл бұрын

Thank You...

@arlenbell4376 6 күн бұрын

Glad I happened across this video as I just changed the blade on my mower two days ago. After a lot of work I was able to tip it backwards and support it as I’ve always heard was the only way to do it. This tip about TDC is a clear winner and I just subscribed to your channel!

@StevesSmallEngineSaloon 5 күн бұрын

Thank You...

@K159S Ай бұрын

Steve is my "go to" guy for lawnmower stuff. His videos are fantastic - clear instructions and he always explains the why's and how's of proper mower maintenance/repair. With the help of his videos, I overhauled the carb, replaced the pull cord and set the gap on the coil of my mower. And it starts on the first pull - every time. You're The Man, Steve!!! 🍻🍻

@StevesSmallEngineSaloon Ай бұрын

WOW! Thank You...

@philipm1009 3 жыл бұрын

Steve thanks to your advice has kept my fleet of lawn mowers and chainsaws in great condition ,I have saved them all from being scrapped not the most modern lawnmower but certainly the best cheers from Ireland

@StevesSmallEngineSaloon 3 жыл бұрын

Fantastic!

@tbarry4990 Жыл бұрын

Found out the hard way NOT to tip your mower on the air filter side .... didn't repeat that mistake. Thanks for the video ..... now my wife won't complain about the oil on the driveway.

@StevesSmallEngineSaloon Жыл бұрын

Right on

@MattD1911 2 ай бұрын

Just found out the hard way today, had it take out in to get fixed. 😑

@groovr22 3 жыл бұрын

Very informative. Good Stuff, Steve..! I love how you explained the reasons for doing it that way, instead of just saying, "Do it this way." You Da-Man..!

@StevesSmallEngineSaloon 3 жыл бұрын

I appreciate that!

@cathycraig1301 8 ай бұрын

I’ve watched a lot of lawn videos. First time anyone addressed this issue. Thank you so very much.

@StevesSmallEngineSaloon 8 ай бұрын

You're Welcome...

@ricknichols5680 Жыл бұрын

I've always wondered about which side to turn up...I never thought about positioning the piston to TDC and closing the valves. U de MAN

@StevesSmallEngineSaloon Жыл бұрын

Right on

@robf9562 2 жыл бұрын

Thanks Steve, setting the engine to TDC before tipping the mower over is an excellent tip. Something that Honda unfathomably neglected to mention in their mower user manual.

@StevesSmallEngineSaloon 2 жыл бұрын

Agreed!

@TRUYORK718 2 жыл бұрын

Hope you come home soon

@bruceparr1678 Жыл бұрын

I run a have been running the same Victa 2 stroke since 1990 on 1700 square metre block. Never had to worry about any of those 4 stroke issues.

@gwhitcutt 8 ай бұрын

Steve, I watched several of your "how to" videos and have enjoyed learning your tips and tricks that genuinely save time. Thanks for that. There is one video I viewed a few weeks ago after watching how to replace a mower blade that outlined the proper way to tip a lawnmower over to avoid problems with oil flooding. I've owned 4 or 5 mowers and have never once experienced any of the problems you pointed out. I'm a believer in maintaining my power equipment and tools. For years, I've made a habit to clean out the underside of the deck after every 2 or 3 uses - especially after cutting damp grass. Maybe I'm just a lucky 76 year old. Except for dripping a little gas from the filler cap when the tank side is low to the ground, no problems. Once I've got grass debris cleared out with my hose and/or the deck washout fitting, I always make a point of starting the engine in the upright position and let it run for a few seconds. Keep up the great work!

@jameslapham3274 2 ай бұрын

Good to see someone making a point about disconnecting the spark plug. I would even suggest talking about doing this before even putting your fingers underneath....

@Skibadger Жыл бұрын

Steve! You are a life-saver. I love your videos. I’m an “engine idiot” and I’ve learned a lot watching your stuff. Thanks!

@StevesSmallEngineSaloon Жыл бұрын

You're Welcome...

@truthlvr863 Жыл бұрын

Steve you teach in a way that helps the home mechanic say I can do that. You are great at being practical and to the point. Thank You for teaching we the weekend warriors.

@matthewvanderbeek2847 Жыл бұрын

Good video.

@charliemiller6401 3 жыл бұрын

I always recommend Steve to my friends. Helpful, knowledgeable, entertaining and to the point, always

@StevesSmallEngineSaloon 3 жыл бұрын

Much appreciated!

@Sanepain 9 ай бұрын

You are right! I found the sweet spot for the piston and turned it over to work on it... and no oil drops--- none! Worked on it easily and it started on first pull with no smoke. Thanks!!!

@StevesSmallEngineSaloon 9 ай бұрын

Glad it helped!