Proteus Simulation of Bluetooth Module and Arduino | App Development on MIT App Inventor

No video

Proteus Simulation of Bluetooth Module and Arduino | App Development on MIT App Inventor

Рет қаралды 94,753

Күн бұрын

#engineeringonline #proteus #bluetoothmodule
This tutorial explains the simulation of the Bluetooth module (HC--05) and Arduino in Proteus 8 Professional through these steps:
- Circuit designing in Proteus 8 Professional
- Coding on Arduino IDE
- App development on MIT App Inventor 2
- Testing on Android phone
MIT App Inventor 2 Website: ai2.appinventor...
Download Bluetooth library for Proteus: www.theenginee...
Download Proteus software from:
getintopc.com/...
Download Arduino IDE from:
www.arduino.cc...
You can also book your one-to-one consultation session here: www.mentoga.co...
Follow us on:
Instagram: / engineeringonline0
Twitter: / engonline0
Facebook: / engineeringonline0
Library Credits:
www.theenginee...
Copyright Disclaimer:
Copyright Disclaimer under Section 107 of the copyright act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use. You can also book your one-to-one consultation session here: www.mentoga.co...

Пікірлер: 268

@EngineeringOnline 4 жыл бұрын

If you want more tutorials related to MIT App Inventor, drop your suggestions below. Thank you for watching the video!

@mahamatnilhassan2749 4 жыл бұрын

hello Engineering Online can you please help me to create an app on MIT app that receives data transmitted by bluetooth for electrical consumption by using an ACS712 module on proteus thank you you did great job

@dulceamormeridareynoza8154 3 жыл бұрын

When I try to select a connection the screen turn black and I can't find the computer. You could help us with that problem, I would really appreciate it!! :c

@GHOST7O2 10 ай бұрын

Sister I have a problem.. there is no COM3 in my Bluetooth settings.. can you give any solution about it.. TIA

@gulsherahmad6198 5 ай бұрын

I am also have the same problem. I am also Add more Incoming COM ports but I don,t find any incoming COMport as to much with my HC05 Moduke . So how to sole this?i am also instill Bluetooth Drivers and try some others possable methode it was not Working .

@deepakpgs4856 4 жыл бұрын

wow. great. very easily and quickly explained everything. keep it up. I found your channel is best in Arduino learning amongst all. pl make same kind of video by controlling a servo or steeper motor with laptop voice recorder. thanks

@EngineeringOnline 4 жыл бұрын

Thank you so much for appreciation. I am glad it has been helpful for you 😊

@nh4599 Жыл бұрын

How do you do if you use a bluetooth usb key on a desktop PC and the port does not appear ?

@user-tu5xm2vw3j 9 ай бұрын

Scan is not working ..when I pressed the select connection names are not showing..please help

@ximenaroldang 3 жыл бұрын

Thank you! I have a problem when I try to select a connection my screen turns black and I can not find the computer :(

@dulceamormeridareynoza8154 3 жыл бұрын

I have the same problem! :c

@ximenaroldang 3 жыл бұрын

Please send help :((((((((

@johanni8726 3 жыл бұрын

Yes! I have the same problem too :c

@adrianhv3083 3 жыл бұрын

Me too! And I don't know what to do about it :'v

@abbychura6056 3 жыл бұрын

My screen turns black too :(

@danielvicente2480 2 жыл бұрын

Thank you for this video it was very helpful, I was also struggling with the COM3 since my computer was coming only COM5 upward, and to solve the problem I just wrote COM5 in Physical Port in proteus. It gives error in the begining but once you connect your computer with the app while running the proteus it disappear and start working wonderful.

@EngineeringOnline 2 жыл бұрын

Great 👍

@sameerk12982 4 жыл бұрын

Very informative and easy to understand tutorial....Thank you very much...appreciated.

@EngineeringOnline 4 жыл бұрын

Thanks a lot for appreciation 👍

@KaranGupta-nf5kb 3 жыл бұрын

Thanks a lot!! This tutorial would really help us in building our Final year project

@EngineeringOnline 3 жыл бұрын

Thank you for appreciation All the best 👍

@nelsondarwinpaktech3954 3 жыл бұрын

good....

@lokeshkinjarapu9000 3 жыл бұрын

Maam I'm not getting any incomming COM port in at more blutooth settings

@prajwalhiremath2418 3 жыл бұрын

same here! whats the solution?

@shubhambansal6232 3 жыл бұрын

www.verizon.com/support/knowledge-base-20605/

@langatkiprotich6095 2 жыл бұрын

Thanks alot. I have enjoyed it, and learnt a lot

@EngineeringOnline 2 жыл бұрын

Glad to know that !

@hamzaavdic4371 9 ай бұрын

I cant connect my phone with laptop, any help

@mtalhakhalid1679 2 жыл бұрын

Thanks for wonderful tut notice how HC05 turned into COMPIM hahaha made me laugh

@EngineeringOnline 2 жыл бұрын

@anokhautomation4453 Жыл бұрын

It was a very very useful tutorial 👍👍👌

@IgnacioMorris 2 жыл бұрын

Great!! I really like your way of explaining !

@EngineeringOnline 2 жыл бұрын

Thank you :)

@dominiquehoyi268 3 жыл бұрын

Thank you Madam, this video really helped me a lot ...

@EngineeringOnline 3 жыл бұрын

Glad to know that :)

@himanshuraj296 4 жыл бұрын

what a nicely explained videos u have uploaded hope u will upload such thing in future

@EngineeringOnline 4 жыл бұрын

Sure will do it. Thank you for appreciation !

@MuhammadQasim-kw1er 3 жыл бұрын

More power to you. This was awesome

@EngineeringOnline 3 жыл бұрын

Thank you for appreciation!

@tejamamidala3151 4 жыл бұрын

My com port is 5 but in bluetooth module it has max of com 4 what should I do

@EngineeringOnline 4 жыл бұрын

Try it on some other PC and let me know if you are facing the same issue!

@muzairj4860 8 ай бұрын

Nice information mam

@DIVALEDDIVA-hz5vp 8 ай бұрын

Trima kasih bos 👍

@goldboytrippleseven23 2 жыл бұрын

Thanks for helping us 😊

@EngineeringOnline 2 жыл бұрын

You are welcome :)

@ariellihan999 Жыл бұрын

My phone's bluetooth is paired with my laptop but it says not connected. Is that why my bluetooth cannot detect my bluetootj?

@momeerehman973 4 жыл бұрын

Hi.... I have a trouble for making aap inventor? I want to creat a push button duel action press (action, led on) and release (action, led off) Kindly make a video for this type of buttons

@EngineeringOnline 4 жыл бұрын

Ok noted!

@anokhautomation4453 2 жыл бұрын

Nice tutorial.very very useful.

@EngineeringOnline 2 жыл бұрын

Thank you :)

@vivekkumargupta7808 Жыл бұрын

Great explanation 👏👏

@EngineeringOnline Жыл бұрын

Thanks

@sumbalzahraameen 4 жыл бұрын

Thank you so much appi 😍🤩🥰🥰🥰

@EngineeringOnline 4 жыл бұрын

You're welcome :)

@utsavmoradiya9950 4 жыл бұрын

This is awesome ....thank u so much

@EngineeringOnline 4 жыл бұрын

Thank you for appreciation 😊

@fredyramirez4104 4 жыл бұрын

I have a problem, i press the buttom of my app in my phone, but it seems that doesnt sent anything, i dont know what im doing wrong, i do everything that you do, i mean a get connected with blutooth but i cant turn on the led

@handelmande5795 3 жыл бұрын

I have the same problem :c

@EngineeringOnline 3 жыл бұрын

Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!

@faizivlogsofficial8678 4 жыл бұрын

Dil khush kardia

@quanhoa2359 8 ай бұрын

If I add 1 more relay, do I need to edit the app or just edit the code?

@ngotrongnghia5084 Жыл бұрын

Hi, first thing first, thanks for the video. When I came to the Select Connection and it connected to my laptop successfully. However, the button ON and OFF don't work for the circuit on proteus. I have followed all of the steps in the video without skipping any of them. I choose the right port for the Bluetooth module and for the code as well. If anyone have solutions, I would be appreciate. Thanks in advanced !

@robomanthan6122 4 жыл бұрын

wow ,,very knowledgeable tutorial for me .....i want to make arduino myself by the help of microcontoller,,capacitor ,crystal......etc can i make arduino and simulate with bluetooth in protius software

@EngineeringOnline 4 жыл бұрын

Thanks for appreciation :) Yes you can do that. First make Arduino than connect Bluetooth module with it

@ouchanihida3327 3 жыл бұрын

I have a small problem. I need to use components that are compatible with Arduino. A position sensor (so I use a GPS module. This GPS module must be Adafruit Ultimate GPS Data Acquisition Module (GPS Included)). A position storage (with an SD card that must work with an SPI link). A bluetooth interface. A GUI to visualize the route (using an Android tablet that is compatible with a bluetooth module). you can advise me to use what as a component . because it's 3 components must be compatible with Arduino and an Android tablet IHM thanks to a Bluetooth module.

@EngineeringOnline 3 жыл бұрын

I am afraid you won't be able to use GPS module in the proteus because it can not be simulated

@mariemtaouss406 4 жыл бұрын

Can you please make for us a tutorial about GPS in proteus with the MIT App Inventor thank you

@EngineeringOnline 4 жыл бұрын

Noted !

@mariemtaouss406 4 жыл бұрын

@@EngineeringOnline Thank you soo much

@vaibhavkumar7833 4 жыл бұрын

I would like to understand, the bluetooth hardware that you are using for serial communication. I am trying to run same project but not able to see the incoming communication port on my machine either with internal/external bluetooth dongle.

@EngineeringOnline 4 жыл бұрын

What kind of error you are receiving

@cynosurewolf6009 2 жыл бұрын

Ma am my mobile device is unable to send data. Serial.read() is returning 0. connection between Mobile And laptop is fine. I have checked it as well. Both are transmitting and receiving data when i start the simulation and press the "on" button from mobile phone nothing happens on proteus and serial.read() returns 0. Moreover when i stop the simulation and press "on" button the app return Unale to write broken pipe error. please help me

@e.t1224 Жыл бұрын

I’m trying to create a simulation for Bluetooth controlled fan using proteus

@EngineeringOnline Жыл бұрын

All the best!

@gopialakunta3501 Жыл бұрын

love u r videos!

@EngineeringOnline Жыл бұрын

+Gopi Alakunta glad to know that :)

@berdaliaek4332 2 жыл бұрын

thenk you

@EngineeringOnline 2 жыл бұрын

You're welcome

@bogliscosmin123 3 жыл бұрын

Thanks! Very useful!

@EngineeringOnline 3 жыл бұрын

I am glad its been useful for you

@TechnoEveryday 2 жыл бұрын

گریٹ

@EngineeringOnline 2 жыл бұрын

Thank you

@e.t1224 Жыл бұрын

I’m trying to build a Bluetooth controlled fan regulator

@saisiddarthmanojmummidi8507 4 жыл бұрын

I have been using Bluetooth module in my project. So we have done a simulation using Proteus. But we have a doubt. How to connect the Bluetooth module in Proteus to an android device? Is it possible to connect it from a predefined app in an android device and send/receive data ? If we can please explain how to perform it.

@EngineeringOnline 4 жыл бұрын

The same process is done in this video. Try to connect Bluetooth module in Proteus with the app you have.

@saisiddarthmanojmummidi8507 4 жыл бұрын

@@EngineeringOnline yah but you have used the app and proteus on the same platform. Can we use the app from the real android device?

@EngineeringOnline 4 жыл бұрын

App is real. I have used this on real Android phone.

@saisiddarthmanojmummidi8507 4 жыл бұрын

Can i know what app is that so that it will be easily for us.

@EngineeringOnline 4 жыл бұрын

The app is developed on MIT App Inventor and then download on phone

@sirinekari6661 3 жыл бұрын

hello , nice video thank you for it , i have a question , why did you choose R=330 ohm ??!!! thank you

@EngineeringOnline 3 жыл бұрын

The resistance value is set in such a way that led can be turned on at high voltage. The resistance value should not be too high and not too low. At high resistance, it will not turn on and at very low resistance, LED will get burned.

@pramodpathade8682 2 жыл бұрын

Hello ma'am, I got this error.... 'class String' has no member named 'lenght' in text.lenght() >0 what should i do? should i remove this line from program ?

@EngineeringOnline 2 жыл бұрын

There is some issue in coding. Kindly recheck. I think there is issue with length spelling

@Blz2000 3 жыл бұрын

Thanks for the tutorial, it was very helpful. Currently i'm using app Inventor to develop an app to graph ECG and EMG signal received from Arduino, the graph part is going well but I'm struggling with the axis labels from the graph, is there a way to make a graph with proper X and Y labels in app Inventor? Appreciate if you can help me.

@EngineeringOnline 3 жыл бұрын

Please share your query on engineeringonline0@gmail.com

@meghagarg2325 4 жыл бұрын

can you please make a tutorial on reading the content of moisture from the soil.

@EngineeringOnline 4 жыл бұрын

Noted !

@meghagarg2325 4 жыл бұрын

@@EngineeringOnline Thank you can you please let me know the estimated date when you'll upload .

@EngineeringOnline 4 жыл бұрын

Can't promise to upload it right away.

@agiarbian3112 3 жыл бұрын

Wow, Thanks!

@EngineeringOnline 3 жыл бұрын

You are welcome !

@e.t1224 Жыл бұрын

The code for the arduino app did not work

@arunbaira220 4 жыл бұрын

Hi sis please say how to design Bluetooth connect directly without any apps. Example Like a headset. Once i switch on my mobile Bluetooth automatically connecting and LED need to Glow. Please say how to design like this.

@EngineeringOnline 4 жыл бұрын

Can you please share the main objective of your project for clarification?

@bukucatatanku3379 3 жыл бұрын

can you help me, why when bluetooth PC is connected to the handphone, but the light is not on? Please help me

@EngineeringOnline 3 жыл бұрын

Are you having any error?

@agusprayogo7932 3 жыл бұрын

help every time i click 'select connection', and then i choose my laptop, it shows an alert "Error 507: Unable to connect. Is the device turned on?". but, when i tried to send file from my android to my laptop using bluetooth, it worked. what should i do? ultimate subscribe if you helped me and worked

@guilhermemoura4137 3 жыл бұрын

Why is the variable c char? Could it not a string or int variable?

@EngineeringOnline 3 жыл бұрын

c is a character and text is string. you are receiving char by character and then updating the text

@princeaggarwalclass8arolln388 2 жыл бұрын

I am On a laptop and i dont have a com ? What can i do

@EngineeringOnline 2 жыл бұрын

There must be a com port

@e.t1224 Жыл бұрын

Where can I get the code for this ?

@_qwerty_001_ 4 жыл бұрын

While using the android application why compim is on your pc instead of hc-05?

@EngineeringOnline 4 жыл бұрын

Since you are using a simulation software (not working on real hardware) and you have to use Bluetooth port of PC so same port needs to be selected.

@riyajha9741 2 жыл бұрын

the app is unable to connect to the laptop or any other device via bluetooth. it says " error 507: Unable to connect. Is the device turned on?" pls solve the issue. thank you

@joshuaannan2278 3 ай бұрын

Same

@eeshashrivastava8146 3 жыл бұрын

Thankssssss a lotttt maaaam

@EngineeringOnline 3 жыл бұрын

You are welcome :)

@orhanz8247 4 жыл бұрын

How can we do kind of this project via IOS ? Also in real project which bluetooth module should we use if awailable ?

@EngineeringOnline 4 жыл бұрын

MIT App works for IOS also. Plus you can use HC-05 and HC-06

@tonynguyen2177 2 жыл бұрын

I don't see COM3 in my PC, how to connect ???

@EngineeringOnline 2 жыл бұрын

Is there any other port?

@tonynguyen2177 2 жыл бұрын

@@EngineeringOnline Ok, thank you so much, My pc have COM5 and It is connected 😘 Have nice day ●

@Taizhuman 3 жыл бұрын

I don`t have any COM port, what I should do?

@EngineeringOnline 3 жыл бұрын

check on different PC

@dhenchudhenchu1051 3 жыл бұрын

Mam mobile me proteus kaise install kre

@EngineeringOnline 3 жыл бұрын

Sorry you can't do that. It does not have mobile application

@dhenchudhenchu1051 3 жыл бұрын

@@EngineeringOnline 😪..ok..thanks

@eeshashrivastava8146 3 жыл бұрын

How can i have to android screen on the pc only??? Pls answer

@EngineeringOnline 3 жыл бұрын

Please elaborate your question more

@eeshashrivastava8146 3 жыл бұрын

@@EngineeringOnline i want to view my app screen also in my laptop itself(May be a virtual mobile phone). So that i can control everything from my laptop. How can i do it maam... can you pls help.

@alanfsantos2009 4 жыл бұрын

Wonderful. Congratulations.

@EngineeringOnline 4 жыл бұрын

Thank You

@sebastianherreragil4491 4 жыл бұрын

Why don't I connect the voltage and ground of the HC-06 module?

@EngineeringOnline 4 жыл бұрын

In simulation, only tx and rx pins can be used. whereas with real hardware, you have to used all of them

@sebastianherreragil4491 4 жыл бұрын

@@EngineeringOnline Thank you very much!!

@nataliebesher2421 3 жыл бұрын

Hello dear, I’ve made all the steps correct and there is no mistakes in it but when connecting the bar code into the app, the app isn’t taking me to another tap that i should install the app i did in it how should i fix this? My phone is iphone

@EngineeringOnline 3 жыл бұрын

Please share the screenshot of error to engineeringonline0@gmail.com

@nataliebesher2421 3 жыл бұрын

@@EngineeringOnline there is no error i tried it on andriod and it worked, but i need it for sos iphone is there a way to make it work on iphone ?

@EngineeringOnline 3 жыл бұрын

@@nataliebesher2421 Does your iPhone creates issues in making Bluetooth connection with pc?

@nataliebesher2421 3 жыл бұрын

@@EngineeringOnline not at all

@alajlassi7192 4 жыл бұрын

I have a problem message error " unable to connect . is the device turned on ?"

@EngineeringOnline 4 жыл бұрын

+ala jlassi Make sure both the mobile and PC's Bluetooth is turned on and click on the connect button in the app after playing the Proteus simulation

@norsyuhaddahnorazlan3950 4 жыл бұрын

I have a question. Is it will work if I used the Arduino IDE online?

@EngineeringOnline 4 жыл бұрын

Yes, it should work fine. generate the hex file and upload in the Proteus

@vivivasquez794 4 жыл бұрын

Hi, excuse my english, I'm spanish, but a I have a problem with the buttons off and on, bluetooth connection buttons works and recognize the bluetooth device pc - phone. I have the same code however, the bottons (off/on) aren't work, can you help me? please Excellent Video

@EngineeringOnline 4 жыл бұрын

Please email at engineeringonline0@gmail.com so i can resolve your issue

@fredyramirez4104 4 жыл бұрын

Can you resolve your problem? I have the same

@vivivasquez794 4 жыл бұрын

Yes, just write to their email explaining your problem, they sent me the files

@fredyramirez4104 4 жыл бұрын

@@vivivasquez794 Gracias, jaja hasta ahorita vi que en tu mensaje decia que hablabas español

@orsuvenkatakrishnaiah1625 3 жыл бұрын

error 507 unable to conect.is device is turned on error

@EngineeringOnline 3 жыл бұрын

Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!

@mangeshpandit4660 4 жыл бұрын

How to add fan,door bell,tv in proteus and on of then by arduino

@EngineeringOnline 4 жыл бұрын

In this video, AC light and DC fan is controlled kzfaq.info/get/bejne/geBom65-mdLSdp8.html For doorbell and tv, you have to model them with other components like AC light or fan

@sakshisingh-xs1uv 3 жыл бұрын

How to add ac or fan and curtons ?

@EngineeringOnline 3 жыл бұрын

you can insert ac or dc motor from the components

@debayanmukherjee01 2 жыл бұрын

Hello! this video has been helpful. but i am getting the "error 507: unable to connect" thing when i try to connect to my pc from the app. can it be solved?? really urgent and important :) thank you.

@EngineeringOnline 2 жыл бұрын

Please make sure you've configured the COM port on the Bluetooth module to match that of your laptop. Next, run the simulation first before you try connecting. Hope it helps!

@debayanmukherjee01 2 жыл бұрын

yes it worked properly :) thankyou very much! this video was very helpful

@EngineeringOnline 2 жыл бұрын

@@debayanmukherjee01 Glad to know that :)

@AdityaSharma-hc3ps 3 жыл бұрын

Sir ye mene kiya tha com k Bluetooth me add kiya tha par ab me original arduino me code upload nhi kar a rha hu Com not available aa rha he

@EngineeringOnline 3 жыл бұрын

Please share the screenshot at engineeringonline0@gmail.com

@queenjisooxoxo7868 3 жыл бұрын

Hi. I cannot upload the arduino codes. I already connected in com 3 for the ports but still couldnt upload the codes. Please help T.T.

@EngineeringOnline 3 жыл бұрын

What issue you are facing

@prathameshvarashetti2562 4 жыл бұрын

I do all the steps as shown but unable to run simulation. I think error would be in com port. When I open Bluetooth setting there it is showing COM19 port but in proteus Bluetooth Library there are up to 4 ports, can this be problem? And one more thing I want to send X and Y co-ordinates through app, how can I send it ?

@EngineeringOnline 4 жыл бұрын

Same Bluetooth port should be selected on the Bluetooth module. Only then you can communicate with the Android app. Try it on some other PC

@prathameshvarashetti2562 4 жыл бұрын

@@EngineeringOnline how can I Send X and Y using joystick, I had made joystick but how can I send it to module?

@EngineeringOnline 4 жыл бұрын

You have made a joystick on app?

@prathameshvarashetti2562 4 жыл бұрын

@@EngineeringOnline Yes sort of which gives the x and y according to ball position.

@EngineeringOnline 4 жыл бұрын

@@prathameshvarashetti2562 Its doable . Have a look at this video kzfaq.info/get/bejne/fdCVaraFmd-8moE.html

@alyr6162 2 жыл бұрын

why it didn't work for me?

@EngineeringOnline 2 жыл бұрын

What is the issue

@alyr6162 2 жыл бұрын

@@EngineeringOnline when I press either the on or of off button nothing happens

@gudlaanusha5002 2 жыл бұрын

after compiling is done, when i am expanding it i can't find file location. anyone can help me ?

@EngineeringOnline 2 жыл бұрын

Please share the screenshot at engineeringonline0@gmail.com

@lokeshkinjarapu9000 3 жыл бұрын

Mom I'm not getting COM3 at COMport in blutooth of my pc. While adding it's getting COM9 but it is not there in blutooth module that I used in Proteus.

@EngineeringOnline 3 жыл бұрын

Try on some other PC

@lokeshkinjarapu9000 3 жыл бұрын

Mom....how to connect Arduino in proteus to Arduino software....

@EngineeringOnline 3 жыл бұрын

@@lokeshkinjarapu9000 Using hex file

@lokeshkinjarapu9000 3 жыл бұрын

@@EngineeringOnline maam....while I'm giving input from mobile app, the serial monitor in Arduino software shows the the input but there is no responce in Proteus software...

@lokeshkinjarapu9000 3 жыл бұрын

Maam plz send me the code.. lokeswararao.kinjarapu@gmail.com

@chakradharreddy8458 3 жыл бұрын

while i am seraching in blutooth com port , it shoes none. what should i do?

@EngineeringOnline 3 жыл бұрын

Do you have a Bluetooth port in your PC?

@chakradharreddy8458 3 жыл бұрын

@@EngineeringOnline yeah.now I got that after several times of doing it.

@chakradharreddy8458 3 жыл бұрын

@@EngineeringOnline but, circuit got connected, even app connected, it's showing my commands in serial monitor, but motors are not moving in my project.

@EngineeringOnline 3 жыл бұрын

Try with simple led then add motors. There might be issue in the code

@chakradharreddy8458 3 жыл бұрын

@@EngineeringOnline yes , I tried, I am not able to see any output for blinking of led....even though there is no error showing in Proteus.

@rajeshadam1675 4 жыл бұрын

Everything is OK, but I am getting an 507 error while connecting my android to my pc. How to fix it? Please help 🙏

@rajeshadam1675 4 жыл бұрын

After pressing on button

@rajeshadam1675 4 жыл бұрын

After pressing on button

@EngineeringOnline 4 жыл бұрын

drop your email. I will send you my files, try with them

@rajeshadam1675 4 жыл бұрын

rajeshadam2000@gmail.com

@EngineeringOnline 4 жыл бұрын

Sent

@thewanderer184 4 жыл бұрын

hey does this setup also work with voice amr app?

@EngineeringOnline 4 жыл бұрын

I haven't try. do try and let me know also

@thewanderer184 4 жыл бұрын

Yeah I have tried, it doesn't work with Amr But it does work Arduino voice controller app.

@electronicstech2484 3 жыл бұрын

While I am connecting to pc, I am Facing a 507 Error, Please Help me.

@electronicstech2484 3 жыл бұрын

@Engineering Online My Email ID: selvapradeep003@gmail.com

@EngineeringOnline 3 жыл бұрын

check email

@princebharti3075 4 жыл бұрын

error 507 has occurred while connecting the app to the proteus model. how can it be rectified

@EngineeringOnline 4 жыл бұрын

First pair your phone with PC via Bluetooth then use MIT app

@pradyumnanadella515 4 жыл бұрын

did the error 507 get solved? please help me solving this issue...very important...please help

@ucNguyen-eu8mz 4 жыл бұрын

I can not click my Port, please help me

@EngineeringOnline 4 жыл бұрын

Please explain your issue in detail

@modelmakersindia2307 4 жыл бұрын

mam please make it for 3 or more switches

@EngineeringOnline 4 жыл бұрын

Are you talking about relays?

@modelmakersindia2307 4 жыл бұрын

@@EngineeringOnline yes sir

@EngineeringOnline 4 жыл бұрын

Check this one kzfaq.info/get/bejne/geBom65-mdLSdp8.html

@modelmakersindia2307 4 жыл бұрын

@@EngineeringOnline no i need it with bluetooth

@modelmakersindia2307 4 жыл бұрын

@@EngineeringOnline thanx a lot

@girishpanchal9072 4 жыл бұрын

how to get display of name of the paired device

@EngineeringOnline 4 жыл бұрын

When you click on the select connection button on app, it shows all device names.

@girishpanchal9072 4 жыл бұрын

@@EngineeringOnline thanks, I mean after selection, can we display the name of selected connection?

@tapandebnath6908 4 жыл бұрын

ma,am lcd programming proteus chalhi nihe raha hi

@EngineeringOnline 4 жыл бұрын

Have you watched the LCD interfacing video?

@pradyumnanadella515 4 жыл бұрын

i am continuesly getting error 507 what should i do...it is very important for my project please get back to me fast. it is a request

@EngineeringOnline 4 жыл бұрын

Are you sure, you are not doing any mistake?

@pradyumnanadella515 4 жыл бұрын

@@EngineeringOnline nooo i am not doning any mistake....there is a problem with connection establishment...please please help me it is very important for me....

@pradyumnanadella515 4 жыл бұрын

@@EngineeringOnline i tried everything once again it shows the same......

@EngineeringOnline 4 жыл бұрын

Drop your email. I will email you my files. Try with them and let me know if you are still facing the same issue

@pradyumnanadella515 4 жыл бұрын

@@EngineeringOnline pradyumnanadella1027@gmail.com

@sajidmanzoor3606 4 жыл бұрын

i need some coding for project can you help me

@EngineeringOnline 3 жыл бұрын

drop an email at engineeringonline0@gmail.com

@hassaanzamir 2 жыл бұрын

Proteus Bluetooth Device Not Showing

@EngineeringOnline 2 жыл бұрын

You have to add library first

@hassaanzamir 2 жыл бұрын

@@EngineeringOnline already added.. everything is fine, but not showing in devices

@hassaanzamir 2 жыл бұрын

@@EngineeringOnline Hvae Done Everything Correctly Port of Com6.. But Sstill facing Issues

@hassaanzamir 2 жыл бұрын

I Think Ports Are Not Configured Correctly.. Send Me Some Videos For That..

@jaimeloandres6054 3 жыл бұрын

pongan subtitulos

@EngineeringOnline 3 жыл бұрын

¿En español?

@hassanguitoun9113 3 жыл бұрын

where is the arduino code !!

@EngineeringOnline 3 жыл бұрын

Drop an email at engineeringonline0@gmail.com

@lourencojunior9068 3 жыл бұрын

hi mam, can I get the Code?

@EngineeringOnline 3 жыл бұрын

Yes drop an email at engineeringonline0@gmail.com

@tapandebnath6908 4 жыл бұрын

Ma,am on horaha hi but off nihi horaha hi

@EngineeringOnline 4 жыл бұрын

There could be some issue in the code

@ankitMadhu-ps5hg 4 жыл бұрын

Dude can I like seriously contact u coz I'm facing a problem in list picker pls bro

@EngineeringOnline 4 жыл бұрын

Yes you can contact either at Facebook or at engineeringonline0@gmail.com

@ankitMadhu-ps5hg 4 жыл бұрын

@@EngineeringOnline ok just pls send me the code for this project

@sherrychristine4574 3 жыл бұрын

Take a bow

@LastChanceNow Жыл бұрын

💯⭐⭐⭐⭐⭐

@dilantoloza8816 3 жыл бұрын

habla mas lento porfa

@EngineeringOnline 3 жыл бұрын

Ejecute el video a una velocidad de 0,75.