Prototype Ready! - Let's build a Foam Cannon! PART 3

Рет қаралды 7,339

Күн бұрын

Many of you have been asking "WHERE'S THE FOAM CANON?!?!?!"
Here's the overview of our newest prototype! This little guy is going to be helping us test the mechanism to create that nice thick foam everyone likes so much. Let us know your feedback and give a like to the comments you support so we can see what you agree about!
CHAPTERS:
0:00 Intro
0:20 Foam Quality
1:05 Bottle Shape
1:48 Wide Mouth
2:10 Measurement Marks
2:21 Closing Mechanism
2:45 Ability to stand
3:14 Cannon & Spray
4:11 Leave your feedback!
Don't forget to click like and subscribe. Follow us in this journey. If you have any questions of how we design our products or which products we have designed let us know in the comment section below.
Follow us on our social media channels!
IG and FB: @activeproducts.inc
Linkedin: Active Products Inc.

Пікірлер: 90

@ACTIVEPRODUCTS Ай бұрын

Hi guys! Remember to check the comments and give a like to the feedback you support, so we can check what you agree about!

@RowlandPeters Ай бұрын

Seeing as it has three sides, would be cool if you could put ounces, milliliters and dilution ratio measurements on it! Each on one of the sides 📏📏📏

@cue03 Ай бұрын

Will there be at launch any availability of additional bottles with a “lid” for those that foam different products. I would like to have 2 foam cannon bottles with lids. 1 for wheels/tire products and 1 for car soap products.

@bluearcherx 21 күн бұрын

ooo a lid... good idea

@neonrust Ай бұрын

Cleaver! The tripod bottom is simply genius ... it fixes one of the most common annoying foam cannon problems. I can't wait to get one.

@VermijlCarDetail Ай бұрын

It is freaking beautiful

@ACTIVEPRODUCTS Ай бұрын

Thank you, glad you liked it!

@CarsWithKeav Ай бұрын

Hope it’s HDPE or it’s getting shattered on camera. 🤣

@ACTIVEPRODUCTS Ай бұрын

Your taste for indiscriminate foam cannon destruction will be satisfied when we send it to you. Probably with an extra bottle just in case.😂

@MarcYanOfficial Ай бұрын

😂😂 looking forward to a drop test

@CarsWithKeav Ай бұрын

@@MarcYanOfficial Me too! For the science.

@corypierce202 Ай бұрын

I’m still trying to figure out how people drop a full bottled foam cannon. It is just stupid stuff people do for a review to set themselves apart from another review. I have a ton of clear bottle products in my garage. Never broke a one. How many do you have?

@CarsWithKeav Ай бұрын

@@corypierce202 I have never dropped one myself either, but I have lots of followers who have broke theirs so I decided to do tests to see the difference in durability between plastic types and now it is part of every foam cannon testing as many want to know this info when making a decision. There was a lot of debate on clear bottles as many not even being dropped have cracked at the neck as well and other places. Now we know most every clear bottle will most likely not survive a single drop fully filled with soap and HDPE ones will not break. Think what you want and you have that right, but I think it’s a bit small minded to call any kind of durability testing stupid just because you’re perfect and don’t have an accident.

@DetailEnthusiast007 Ай бұрын

Looks cool! Hopefully the translucent plastic isn't going shatter as easily as others.

@JohnD15317 Ай бұрын

Looks great!

@designedbydave_ca Ай бұрын

I have the active stubby gun and I’ve been holding off and waiting for this foam cannon to drop. Cannot wait!!

@kurtismatthews2581 Ай бұрын

active have some really good design engineers, their products always look so clean.

@ACTIVEPRODUCTS Ай бұрын

Thanks for the feedback, I’m sure the team appreciates it!

@vr4966 Ай бұрын

looking forward to the release! Also a quality garden hose cannon version is certainly needed with the adjustable fan

@Chris_mk7 Ай бұрын

It is really beautiful!!! Hope to test it out!!

@ACTIVEPRODUCTS Ай бұрын

Thank you very much!

@RowlandPeters Ай бұрын

Excited for this to be released and tested by Keav, JTC, JOSHV etc! Need to know if I can go to Foamtown USA with this one👌🏻💯⛽

@birddogg3270 Ай бұрын

I have the active 2.0 pressure washer and short gun. Looking forward to this foam cannon. I currently have the mtm , and debating getting the Mjjc . Ill have to see reviews on the active one

@ACTIVEPRODUCTS Ай бұрын

Give us a chance!

@saviordream Ай бұрын

It's great to see an update on this. My main foam gun (MJJC Pro V2) hasn't been working that well lately, even after changing the filter, so I've been using a backup cannon. Been looking to get a new main cannon and was just wondering what the progress on the Active unit was. Hopefully you bring this to market soon as I'm ready to buy as soon as it becomes available.

@oRedRaider Ай бұрын

YEAH BOYYYY!!!

@MatthewPopov-hl7fp Ай бұрын

Any ETA for release? And will Active Products Australia sell the new Foam Cannon ?

@broncobill3902 Ай бұрын

Finally! I’m so tired of my el cheapo stand in.

@alanf5351 Ай бұрын

Looks like a winner. I will be buying the 2.3 and your swivel gun very very soon once I hear back from Active on a question I sent today. When will this be available for purchase? I may have to buy a MJJC as I do not have anything at the moment but am buying all I need to start pressure washing our vehicles. Your excellent customer service is where you stand apart from some of your competitors.

@Bendeta Ай бұрын

Release it ASAP!

@rubenharris9241 Ай бұрын

I do not need one of these……but I am buying one anyway.

@sandoutlaw85 Ай бұрын

Don't forget the weighted ball

@errorhunterful 21 күн бұрын

Hope one day u will start selling here in Serbia... I wanna buy active 2.0 and all the stuffs but there is no anyone in europe to sell :)

@BillThrash Ай бұрын

JC, I have the brand new Active 2.3, let me test this! :)

@Aestheticsauto Ай бұрын

Very Excited about this product, the gun is extremely easy to use and well balanced, what will be orvese inside the foam Cannon

@jwhoa1733 Ай бұрын

The actual color would be nice but i would think it being darker would be hard to see the product inside.i think making a small sight line on one side would be beneficial

@bustosraul1 Ай бұрын

I’d love to see an orfice for those who have lower pressure units I use two one that’s a cordless dewalt and I can’t ever get good foam from anything I’ve used with it

@ShineAndPreserveDetailing Ай бұрын

Can’t wait for it, it’s beautiful. Does any rotating pieces on it have ball bearing clicks similar to the PF22.2? I feel that gives it a super quality touch as well.

@ACTIVEPRODUCTS Ай бұрын

No clicks unfortunately, but rotating pieces feel smooth to handle.

@dinokarakostas6407 Ай бұрын

When is the release date ?

@justinmarquez2826 Ай бұрын

is it able to clip in to wall mounted coupler maybe needs to stick out a little

@maxs7976 Ай бұрын

2.3 buyers getting a promo code?

@ryanmccabe7272 Ай бұрын

I agree with this, the foam cannon sent with 2.3 is basically un-usable

@cue03 Ай бұрын

Promo code for the whole accessory bundle for 2.3 preorder and regular buys. Yes please.

@stephenwest7497 Ай бұрын

Couldn't see in the video, is the lid double threaded so it can be screwed onto standard small mouth jars as well?

@Rephrased Ай бұрын

If its not full stainless (even though it doesn't really matter) I don't want it. Griots for now.

@ACTIVEPRODUCTS Ай бұрын

The body is indeed made of 304 Stainless Steel.

@en3rgy187 Ай бұрын

I hope your production piece has a nice rubber base. I'd make it replaceable and availabke in different colors.

@salman13 Ай бұрын

we know the quality will be there but it all comes down to price :) some of the ones many of us have are already very good and make excellent foam

@sethlover6498 Ай бұрын

whats the drop rating?

@garethdavies7564 Ай бұрын

will it be better tha mjjc how much will it cost?

@Reaper-Jim Ай бұрын

Questions … What is the main body made of? If it’s not stainless, why not? I don’t care what it costs, I just don’t want it rusting, corroding, tarnishing or failing due to those previous conditions. If it’s brass or whatever, it’s a pass for me. Why should I buy this over MTM or similar sprayers? I like the bottle but it needs a plastic or rubberized plastic ring around its base. Added stability and that. Plus it would look better. Again, not concerned about cost. I’m looking more for a one and done product. 😊😊😊

@ACTIVEPRODUCTS Ай бұрын

Hi there. Sorry for the late response! The body is indeed made of 304 Stainless Steel. About your other question about why should you choose this one, at this moment we're in the prototype stage, so we could only answer it based on our expectations of the final product are! Foam quality is the main concern for most users, so we're working to make this cannon to deliver the best kind of foam as possible. At this moment, the prototype is delivering great foam, but we're waiting for the next sample to arrive to demonstrate it and see what your feedback is. In our experience, the stability has been quite good with the tripod shape. With the hose attached, it acts like an extra "leg" and give extra stability. However, if enough people are looking for rubber base, we'll consider it!

@Reaper-Jim Ай бұрын

@@ACTIVEPRODUCTSExactly what I was looking for and hoping to hear. Thank you.

@aaronjbaure Ай бұрын

1/4 turn similar to mjjc s v3

@majestynyny Ай бұрын

Hurry up and release it.

@Yoh-Dah Ай бұрын

Hopefully it doesn't leak when it's upside down or shaken.

@supremewhip Ай бұрын

Take my money. 💰

@eisenguard Ай бұрын

Looks great.. What about the aktive 2.0 is it possible to get in EU (Denmark) or only US??

@ACTIVEPRODUCTS Ай бұрын

At this moment we only ship to Canada, US and Australia, unfortunately. But we'd love expanding to Europe at some point!

@eisenguard Ай бұрын

@@ACTIVEPRODUCTS okay thanks for answer, really liked to try it out, but must wait then…

@EG6chris Ай бұрын

Yeah, but WHEN?

@mrslickdetailer9652 18 күн бұрын

Why not get rid of the soap adjuster and just have the cannon on max soap? Nobody wants "less suds" and if they did, just add less soap to the mix.

@ratton5028 Ай бұрын

Hi there, must confess that I knocked over a full form canon on a concrete floor and it smashed, accidents do happen. I contacted the company to see if I could get a replacement bottle and they said no, but they would sell me a whole new foam canon. Won’t deal with that company again. Hope you make additional bottles available if needed.

@justbenwild Ай бұрын

How soon is this going to be available to order? I’m looking to order the bundle. Does anybody else have recommendations to get me by or just use the one that came in my active 2.3? Biggest thing I don’t like is how long the gun is.

@mikemccormick6128 Ай бұрын

They have a short gun that has been out for quite a while. I have it and it works great. The short gun has been getting rave reviews.

@justbenwild Ай бұрын

@@mikemccormick6128 What should I use at the bottle? I get what you’re saying and I might not be able to buy the bundle if I buy one piece by one piece. Might be able to get something close.

@mikemccormick6128 Ай бұрын

@@justbenwild I ended up getting the MTM Hydro. Any high quality foamer is going to be in the $80 to $100 price range and I suspect the Active foamer will also be in that price range. It's hard for me to make a recommendation before knowing when it will be released. I actually bought the Active 2.0 on Amazon on April 10 without knowing anything about the 2.3 model. By the time my order was delivered, I found out about the new product release, so I returned the 2.0 and ordered the 2.3 on the Active website. I ordered the Active short gun at the same time as I ordered the Active 2.0 and I also ordered the MTM Hydro at that same time. I think it works pretty good. Since I already have a high quality foam canon, I won't be ordering the one from Active unless something happens to the one I already have.

@Tanner_Teves Ай бұрын

How tf are there comments from a day ago when the video dropped 4 hours ago?? 😂

@CarsWithKeav Ай бұрын

When it’s set to premiere you can comment before the video is released.

@Tanner_Teves Ай бұрын

@@CarsWithKeav Ahh gotcha, thanks legend. Thought y’all were some fucking time travelers or something 😂

@CarsWithKeav Ай бұрын

@@Tanner_Teves Well we are just needed a good excuse so we don’t mess with the space time continuum. Crap I think I said too much now my kids are disappearing from my photos. Got to go find Doc Brown and fix this.

@OpticDetailingKY Ай бұрын

Can we get a full kit. 2.3, new foam cannon, and gun included??????

@ACTIVEPRODUCTS Ай бұрын

If there's enough people who'd like this, we'll consider it!

@deanfisher1753 24 күн бұрын

This was also my thought, instead of including some subpar parts with the washer, have the option for an upgrade "premium kit" that has the good hose, gun and new foam cannon included for a reasonable price.