2014 - 2021 Toyota Tundra Front Speakers Install

Рет қаралды 31,548

2 жыл бұрын

Parts used linked in the description below!
Watch a full tutorial as a 2016 Toyota Tundra will have a new 6x9" mid range speaker installed in the door and tweeter in the dash. We will be using Alpine 6x9" Type S Component set for better sound quality and ease of install.
NOTE: Our Tundra was not equipped with the factory JBL sound system however the install process should still be the same.
This video applies to Toyota Tundra models for years 2014, 2015, 2016, 2017, 2018, 2019, 2020, and 2021. This video also includes door panel removal, complete speaker installation, and testing.
Click here for the radio install on this Tundra:
• 2014 - 2021 Toyota Tun...
Click here for the 4 channel amplifier install video:
• 2014 - 2021 Toyota Tun...
Click here for the rear speaker install video:
• 2014 - 2021 Toyota Tun...
Click here for the Amp and Sub install video:
• 2014 - 2021 Toyota Tun...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Alpine 6x9" Type S Component Speakers: amzn.to/3kPlosO
*Metra 72-8104 Speaker Harness Adapters: amzn.to/3xQDgqB
*Metra 82-8146 6x9" Speaker Bracket Adapters: amzn.to/3hiOQnN
--Or use Metra 82-8147 for 6.5" Speakers: amzn.to/3h9boYa
*Toyota 2" Tweeter Bracket Adapters: amzn.to/3gX571u
Disclosure: As an Amazon Associate I earn from qualifying purchases

Пікірлер: 38

@ProvoBeastAudio 2 жыл бұрын

Parts used linked in the description of the video!

@xtremexp25 9 ай бұрын

Added tip. Instead of unscrewing the screws holding the door handle, just pop out the two cables .

@tractordirt5167 2 жыл бұрын

Excellent…simple and clear!

@dalegallegos937 Жыл бұрын

Great video! I did everything and subs 2 amps all plug n play and never removed the head unit, all the wiring you need is under the passenger seat

@stevestrapac3056 Жыл бұрын

Great video! Super informative and helpful. My question as a newbie is, can I upgrade my tundra door speakers before the amp? Or does the amp go first? Also, is the sound deadening material available in the links? Do you have other videos detailing it?

@mikeacuna6077 Жыл бұрын

I don't think the factory amp has enough power to run after market speakers in the doors. With my 2015, I went with Taco Tunes plug and play 5 channel amp, installed Polk Audio separates in all 4 doors (mid bass and separate tweeter with a crossover) a Rockford loaded 10 inch sub and it sounds great. I just recently eliminated my center dash speaker and went with Kicker 3.5 2-ways in the corners. My understanding is the stock radio powers the dash speakers.

@AgentBravoM Жыл бұрын

I have a 2018 non JBL, I’m adding new speakers, aftermarket amp, subwoofer, keeping stock head unit and using the Tacotunes Plug n play harness that plugs in at the stock amplifier harness located underneath the front passenger seat. Will my stock speaker wiring be enough for the new speakers, or should I run new wire to them? If so, do I just run the new wires from the speaker to the aftermarket amp? Or does the wiring need to go to the back of the head unit?

@cgwjy122 2 жыл бұрын

Where are all the links to the items used in this installation?

@26outrage 11 ай бұрын

This is great - do you guys have a simple solution for the front center speaker?... maybe a small sub?

@JoseCruz-er6fo 4 ай бұрын

Remove it. It’s garbage and not a true center output

@Pilkanozna4 11 ай бұрын

@ProvoBeastAudio. I was told if I change the side door speakers, and new amp that I will lose the center dash speaker, is this true?

@twoalward9166 3 ай бұрын

Heads up -- the factory speakers work as brackets. Just cut the basket and cone out and mount your new 6x9 speakers right onto them. That wiring suggests that the tweeter and midbass are both 4ohm speakers and wired like that present a 2ohm load to the amplifier. There is no such thing as "essentially a pass-thru". Both loads are presented on the same output channel. This is important because if someone buys 2ohm speakers and installs like that, many amps will go into protect mode.

@noahodell5817 10 ай бұрын

Hey Provo! (And any other sound guru who knows the answer) Quick question for you. I’m getting JBL 605 csq speakers that have an external crossover. How do I incorporate the factory tweeter harness so I don’t lose midrange?? Thank you!

@DarealAGee Жыл бұрын

What was it that you put in the door for the mid range 6x9s?

@rg6829 3 ай бұрын

How are the tweeters amplified it the are getting signal from the head unit not the amp?

@TheReeper602 Ай бұрын

Did you have to bypass the factory amp?

@grimeshpatel7304 Жыл бұрын

How do the Alpine”s sound. I’m sure better than the stock. Would you recommend them? Do they have a good sound quality bass mid high. I will be using a JL Audio 400/4. If not any other 6x9 and 6.5”s you can recommend. Ps:// People are raving about Skar any thoughts. Thank You 2020 Tundra SR5 Crewmax.

@ProvoBeastAudio Жыл бұрын

Love the alpines. Highly recommended. Skar is fine too but alpine is a better build quality.

@elbaron51 Жыл бұрын

Hi what about the center speaker on the dash did you eliminate it

@mikeacuna6077 Жыл бұрын

I did

@shill3541 Жыл бұрын

Is there a harness for the front top speakers instead of cutting and splicing

@mikeacuna6077 Жыл бұрын

@WCS-xp9lu Жыл бұрын

Yes, there is a harness for the top dash speakers on amazon made by red wolf. It won't work for the center dash speaker though, that's a weird speaker & it messes up the sound stage, just disconnect it.

@davidbarajas7430 2 жыл бұрын

Where can I buy everything I need and how do I order it to bring everything I need?

@ProvoBeastAudio 2 жыл бұрын

All linked in the description

@BrandoCG 5 ай бұрын

Hello. Can you help me out. I have a 2017 4.6l v8 tundra and I’m looking to do a speaker swap with just using the adapter plug ins but when I click on the link it says it does not fit my 2017 tundra. Is this true or would I need to look for different adapters? Please help I need to get rid of these nasty stock speakers 😊

@ProvoBeastAudio 5 ай бұрын

Amazon's fit guide is garbage. Parts listed will work for this gen tundra fine.

@miguelcruz4658 2 жыл бұрын

Is this the same for the 2008 tundra?

@ProvoBeastAudio 2 жыл бұрын

Well the 08 is a previous generation, so it won't be identical, but the technique will be similar.

@yellowfin1962 9 ай бұрын

Got a question, are you using the factory radio?

@ProvoBeastAudio 9 ай бұрын

Yes see all the videos in the description

@yellowfin1962 9 ай бұрын

Next question. My 2020 Tundra does not have the JBL system. What should I do with the center dash speaker?

@rg6829 4 ай бұрын

How is the tweeter getting power now? I thought it was powered by the head unit. But you just swapped it out. Confused here 😅

@ProvoBeastAudio 4 ай бұрын

It's still powered by the radio and the midbass would be powered by the stock amp under the seat. No change in the wiring. Truth is however, we added a 4 channel amp to power them anyways (and that video is linked in the description).

@rg6829 4 ай бұрын

@@ProvoBeastAudio thx for the reply. But how are the new tweeters being powered by the new amp if they are still wired to the head unit?